1. 23 10月, 2015 7 次提交
  2. 22 10月, 2015 22 次提交
    • B
      qmi_wwan: add Sierra Wireless MC74xx/EM74xx · 0db65fcf
      Bjørn Mork 提交于
      New device IDs shamelessly lifted from the vendor driver.
      Signed-off-by: NBjørn Mork <bjorn@mork.no>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0db65fcf
    • D
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec · 199c6550
      David S. Miller 提交于
      Steffen Klassert says:
      
      ====================
      pull request (net): ipsec 2015-10-22
      
      1) Fix IPsec pre-encap fragmentation for GSO packets.
         From Herbert Xu.
      
      2) Fix some header checks in _decode_session6.
         We skip the header informations if the data pointer points
         already behind the header in question for some protocols.
         This is because we call pskb_may_pull with a negative value
         converted to unsigened int from pskb_may_pull in this case.
         Skipping the header informations can lead to incorrect policy
         lookups. From Mathias Krause.
      
      3) Allow to change the replay threshold and expiry timer of a
         state without having to set other attributes like replay
         counter and byte lifetime. Changing these other attributes
         may break the SA. From Michael Rossberg.
      
      4) Fix pmtu discovery for local generated packets.
         We may fail dispatch to the inner address family.
         As a reault, the local error handler is not called
         and the mtu value is not reported back to userspace.
      
      Please pull or let me know if there are problems.
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      199c6550
    • D
      net: ipv6: Dont add RT6_LOOKUP_F_IFACE flag if saddr set · d46a9d67
      David Ahern 提交于
      741a11d9 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set")
      adds the RT6_LOOKUP_F_IFACE flag to make device index mismatch fatal if
      oif is given. Hajime reported that this change breaks the Mobile IPv6
      use case that wants to force the message through one interface yet use
      the source address from another interface. Handle this case by only
      adding the flag if oif is set and saddr is not set.
      
      Fixes: 741a11d9 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set")
      Cc: Hajime Tazaki <thehajime@gmail.com>
      Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d46a9d67
    • D
      Merge branch 'isdn-null-deref' · 92a93fd5
      David S. Miller 提交于
      Karsten Keil says:
      
      ====================
      Fix potential NULL pointer access and memory leak in ISDN layer2 functions
      
      Insu Yun did brinup the issue with not checking the skb_clone() return
      value in the layer2 I-frame ull functions.
      This series fix the issue in a way which avoid protocol violations/data loss
      on a temporary memory shortage.
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      92a93fd5
    • K
      mISDN: fix OOM condition for sending queued I-Frames · c96356a9
      Karsten Keil 提交于
      The old code did not check the return value of skb_clone().
      The extra skb_clone() is not needed at all, if using skb_realloc_headroom()
      instead, which gives us a private copy with enough headroom as well.
      We need to requeue the original skb if the call failed, because we cannot
      inform upper layers about the data loss. Restructure the code to minimise
      rollback effort if it happens.
      This fix kernel bug #86091
      
      Thanks to Insu Yun <wuninsu@gmail.com> to remind me on this issue.
      Signed-off-by: NKarsten Keil <keil@b1-systems.de>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c96356a9
    • K
      ISDN: fix OOM condition for sending queued I-Frames · c7a7c95e
      Karsten Keil 提交于
      The skb_clone() return value was not checked and the skb_realloc_headroom()
      usage was wrong, the old skb was not freed. It turned out, that the
      skb_clone is not needed at all, the skb_realloc_headroom() will create a
      private copy with enough headroom and the original SKB can be used for the
      ACK queue.
      We need to requeue the original skb if the call failed, since the upper
      layer cannot be informed about memory shortage.
      
      Thanks to Insu Yun <wuninsu@gmail.com> to remind me on this issue.
      Signed-off-by: NKarsten Keil <keil@b1-systems.de>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c7a7c95e
    • J
      VSOCK: sock_put wasn't safe to call in interrupt context · 4ef7ea91
      Jorgen Hansen 提交于
      In the vsock vmci_transport driver, sock_put wasn't safe to call
      in interrupt context, since that may call the vsock destructor
      which in turn calls several functions that should only be called
      from process context. This change defers the callling of these
      functions  to a worker thread. All these functions were
      deallocation of resources related to the transport itself.
      
      Furthermore, an unused callback was removed to simplify the
      cleanup.
      
      Multiple customers have been hitting this issue when using
      VMware tools on vSphere 2015.
      
      Also added a version to the vmci transport module (starting from
      1.0.2.0-k since up until now it appears that this module was
      sharing version with vsock that is currently at 1.0.1.0-k).
      Reviewed-by: NAditya Asarwade <asarwade@vmware.com>
      Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
      Signed-off-by: NJorgen Hansen <jhansen@vmware.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4ef7ea91
    • D
      netlink: fix locking around NETLINK_LIST_MEMBERSHIPS · 47191d65
      David Herrmann 提交于
      Currently, NETLINK_LIST_MEMBERSHIPS grabs the netlink table while copying
      the membership state to user-space. However, grabing the netlink table is
      effectively a write_lock_irq(), and as such we should not be triggering
      page-faults in the critical section.
      
      This can be easily reproduced by the following snippet:
          int s = socket(AF_NETLINK, SOCK_RAW, NETLINK_ROUTE);
          void *p = mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANON, -1, 0);
          int r = getsockopt(s, 0x10e, 9, p, (void*)((char*)p + 4092));
      
      This should work just fine, but currently triggers EFAULT and a possible
      WARN_ON below handle_mm_fault().
      
      Fix this by reducing locking of NETLINK_LIST_MEMBERSHIPS to a read-side
      lock. The write-lock was overkill in the first place, and the read-lock
      allows page-faults just fine.
      Reported-by: NDmitry Vyukov <dvyukov@google.com>
      Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      47191d65
    • A
      net: phy: dp83848: Add TI DP83848 Ethernet PHY · 34e45ad9
      Andrew F. Davis 提交于
      Add support for the TI DP83848 Ethernet PHY device.
      
      The DP83848 is a highly reliable, feature rich, IEEE 802.3 compliant
      single port 10/100 Mb/s Ethernet Physical Layer Transceiver supporting
      the MII and RMII interfaces.
      Signed-off-by: NAndrew F. Davis <afd@ti.com>
      Signed-off-by: NDan Murphy <dmurphy@ti.com>
      Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
      Acked-by: NDan Murphy <dmurphy@ti.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      34e45ad9
    • H
      net: sun4i-emac: Properly free resources on probe failure and remove · 104eb270
      Hans de Goede 提交于
      Fix sun4i-emac not releasing the following resources:
      -iomapped memory not released on probe-failure nor on remove
      -clock not getting disabled on probe-failure nor on remove
      -sram not being released on remove
      
      And while at it also add error checking to the clk_prepare_enable call
      done on probe.
      Signed-off-by: NHans de Goede <hdegoede@redhat.com>
      Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      104eb270
    • J
      openvswitch: Serialize nested ct actions if provided · e754ec69
      Joe Stringer 提交于
      If userspace provides a ct action with no nested mark or label, then the
      storage for these fields is zeroed. Later when actions are requested,
      such zeroed fields are serialized even though userspace didn't
      originally specify them. Fix the behaviour by ensuring that no action is
      serialized in this case, and reject actions where userspace attempts to
      set these fields with mask=0. This should make netlink marshalling
      consistent across deserialization/reserialization.
      Reported-by: NJarno Rajahalme <jrajahalme@nicira.com>
      Signed-off-by: NJoe Stringer <joestringer@nicira.com>
      Acked-by: NPravin B Shelar <pshelar@nicira.com>
      Acked-by: NThomas Graf <tgraf@suug.ch>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e754ec69
    • J
      openvswitch: Mark connections new when not confirmed. · 4f0909ee
      Joe Stringer 提交于
      New, related connections are marked as such as part of ovs_ct_lookup(),
      but they are not marked as "new" if the commit flag is used. Make this
      consistent by setting the "new" flag whenever !nf_ct_is_confirmed(ct).
      Reported-by: NJarno Rajahalme <jrajahalme@nicira.com>
      Signed-off-by: NJoe Stringer <joestringer@nicira.com>
      Acked-by: NThomas Graf <tgraf@suug.ch>
      Acked-by: NPravin B Shelar <pshelar@nicira.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4f0909ee
    • J
      openvswitch: Clarify conntrack COMMIT behaviour · 1d008a1d
      Joe Stringer 提交于
      The presence of this attribute does not modify the ct_state for the
      current packet, only future packets. Make this more clear in the header
      definition.
      Signed-off-by: NJoe Stringer <joestringer@nicira.com>
      Acked-by: NThomas Graf <tgraf@suug.ch>
      Acked-by: NPravin B Shelar <pshelar@nicira.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1d008a1d
    • J
      openvswitch: Reject ct_state masks for unknown bits · 9e384715
      Joe Stringer 提交于
      Currently, 0-bits are generated in ct_state where the bit position is
      undefined, and matches are accepted on these bit-positions. If userspace
      requests to match the 0-value for this bit then it may expect only a
      subset of traffic to match this value, whereas currently all packets
      will have this bit set to 0. Fix this by rejecting such masks.
      Signed-off-by: NJoe Stringer <joestringer@nicira.com>
      Acked-by: NPravin B Shelar <pshelar@nicira.com>
      Acked-by: NThomas Graf <tgraf@suug.ch>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9e384715
    • R
      tcp: remove improper preemption check in tcp_xmit_probe_skb() · e2e8009f
      Renato Westphal 提交于
      Commit e520af48 introduced the following bug when setting the
      TCP_REPAIR sockoption:
      
      [ 2860.657036] BUG: using __this_cpu_add() in preemptible [00000000] code: daemon/12164
      [ 2860.657045] caller is __this_cpu_preempt_check+0x13/0x20
      [ 2860.657049] CPU: 1 PID: 12164 Comm: daemon Not tainted 4.2.3 #1
      [ 2860.657051] Hardware name: Dell Inc. PowerEdge R210 II/0JP7TR, BIOS 2.0.5 03/13/2012
      [ 2860.657054]  ffffffff81c7f071 ffff880231e9fdf8 ffffffff8185d765 0000000000000002
      [ 2860.657058]  0000000000000001 ffff880231e9fe28 ffffffff8146ed91 ffff880231e9fe18
      [ 2860.657062]  ffffffff81cd1a5d ffff88023534f200 ffff8800b9811000 ffff880231e9fe38
      [ 2860.657065] Call Trace:
      [ 2860.657072]  [<ffffffff8185d765>] dump_stack+0x4f/0x7b
      [ 2860.657075]  [<ffffffff8146ed91>] check_preemption_disabled+0xe1/0xf0
      [ 2860.657078]  [<ffffffff8146edd3>] __this_cpu_preempt_check+0x13/0x20
      [ 2860.657082]  [<ffffffff817e0bc7>] tcp_xmit_probe_skb+0xc7/0x100
      [ 2860.657085]  [<ffffffff817e1e2d>] tcp_send_window_probe+0x2d/0x30
      [ 2860.657089]  [<ffffffff817d1d8c>] do_tcp_setsockopt.isra.29+0x74c/0x830
      [ 2860.657093]  [<ffffffff817d1e9c>] tcp_setsockopt+0x2c/0x30
      [ 2860.657097]  [<ffffffff81767b74>] sock_common_setsockopt+0x14/0x20
      [ 2860.657100]  [<ffffffff817669e1>] SyS_setsockopt+0x71/0xc0
      [ 2860.657104]  [<ffffffff81865172>] entry_SYSCALL_64_fastpath+0x16/0x75
      
      Since tcp_xmit_probe_skb() can be called from process context, use
      NET_INC_STATS() instead of NET_INC_STATS_BH().
      
      Fixes: e520af48 ("tcp: add TCPWinProbe and TCPKeepAlive SNMP counters")
      Signed-off-by: NRenato Westphal <renatow@taghos.com.br>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e2e8009f
    • D
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · 36a28b21
      David S. Miller 提交于
      Pablo Neira Ayuso says:
      
      ====================
      Netfilter fixes for net
      
      The following patchset contains four Netfilter fixes for net, they are:
      
      1) Fix Kconfig dependencies of new nf_dup_ipv4 and nf_dup_ipv6.
      
      2) Remove bogus test nh_scope in IPv4 rpfilter match that is breaking
         --accept-local, from Xin Long.
      
      3) Wait for RCU grace period after dropping the pending packets in the
         nfqueue, from Florian Westphal.
      
      4) Fix sleeping allocation while holding spin_lock_bh, from Nikolay Borisov.
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      36a28b21
    • J
      tipc: conditionally expand buffer headroom over udp tunnel · e5356794
      Jon Paul Maloy 提交于
      In commit d999297c ("tipc: reduce locking scope during packet reception")
      we altered the packet retransmission function. Since then, when
      restransmitting packets, we create a clone of the original buffer
      using __pskb_copy(skb, MIN_H_SIZE), where MIN_H_SIZE is the size of
      the area we want to have copied, but also the smallest possible TIPC
      packet size. The value of MIN_H_SIZE is 24.
      
      Unfortunately, __pskb_copy() also has the effect that the headroom
      of the cloned buffer takes the size MIN_H_SIZE. This is too small
      for carrying the packet over the UDP tunnel bearer, which requires
      a minimum headroom of 28 bytes. A change to just use pskb_copy()
      lets the clone inherit the original headroom of 80 bytes, but also
      assumes that the copied data area is of at least that size, something
      that is not always the case. So that is not a viable solution.
      
      We now fix this by adding a check for sufficient headroom in the
      transmit function of udp_media.c, and expanding it when necessary.
      
      Fixes: commit d999297c ("tipc: reduce locking scope during packet reception")
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e5356794
    • A
      net: cavium: change NET_VENDOR_CAVIUM to bool · 7a4264a9
      Andreas Schwab 提交于
      CONFIG_NET_VENDOR_CAVIUM is only used to hide/show config options and to
      include subdirectories in the build, so it doesn't make sense to make it
      tristate.
      Signed-off-by: NAndreas Schwab <schwab@suse.de>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7a4264a9
    • J
      tipc: allow non-linear first fragment buffer · 45c8b7b1
      Jon Paul Maloy 提交于
      The current code for message reassembly is erroneously assuming that
      the the first arriving fragment buffer always is linear, and then goes
      ahead resetting the fragment list of that buffer in anticipation of
      more arriving fragments.
      
      However, if the buffer already happens to be non-linear, we will
      inadvertently drop the already attached fragment list, and later
      on trig a BUG() in __pskb_pull_tail().
      
      We see this happen when running fragmented TIPC multicast across UDP,
      something made possible since
      commit d0f91938 ("tipc: add ip/udp media type")
      
      We fix this by not resetting the fragment list when the buffer is non-
      linear, and by initiatlizing our private fragment list tail pointer to
      the tail of the existing fragment list.
      
      Fixes: commit d0f91938 ("tipc: add ip/udp media type")
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      45c8b7b1
    • J
      openvswitch: Allocate memory for ovs internal device stats. · 1241365f
      James Morse 提交于
      "openvswitch: Remove vport stats" removed the per-vport statistics, in
      order to use the netdev's statistics fields.
      "openvswitch: Fix ovs_vport_get_stats()" fixed the export of these stats
      to user-space, by using the provided netdev_ops to collate them - but ovs
      internal devices still use an unallocated dev->tstats field to count
      packets, which are no longer exported by this api.
      
      Allocate the dev->tstats field for ovs internal devices, and wire up
      ndo_get_stats64 with the original implementation of
      ovs_vport_get_stats().
      
      On its own, "openvswitch: Fix ovs_vport_get_stats()" fixes the OOPs,
      unmasking a full-on panic on arm64:
      
      =============%<==============
      [<ffffffbffc00ce4c>] internal_dev_recv+0xa8/0x170 [openvswitch]
      [<ffffffbffc0008b4>] do_output.isra.31+0x60/0x19c [openvswitch]
      [<ffffffbffc000bf8>] do_execute_actions+0x208/0x11c0 [openvswitch]
      [<ffffffbffc001c78>] ovs_execute_actions+0xc8/0x238 [openvswitch]
      [<ffffffbffc003dfc>] ovs_packet_cmd_execute+0x21c/0x288 [openvswitch]
      [<ffffffc0005e8c5c>] genl_family_rcv_msg+0x1b0/0x310
      [<ffffffc0005e8e60>] genl_rcv_msg+0xa4/0xe4
      [<ffffffc0005e7ddc>] netlink_rcv_skb+0xb0/0xdc
      [<ffffffc0005e8a94>] genl_rcv+0x38/0x50
      [<ffffffc0005e76c0>] netlink_unicast+0x164/0x210
      [<ffffffc0005e7b70>] netlink_sendmsg+0x304/0x368
      [<ffffffc0005a21c0>] sock_sendmsg+0x30/0x4c
      [SNIP]
      Kernel panic - not syncing: Fatal exception in interrupt
      =============%<==============
      
      Fixes: 8c876639 ("openvswitch: Remove vport stats.")
      Signed-off-by: NJames Morse <james.morse@arm.com>
      Acked-by: NPravin B Shelar <pshelar@nicira.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1241365f
    • D
      net: Really fix vti6 with oif in dst lookups · f1900fb5
      David Ahern 提交于
      6e28b000 ("net: Fix vti use case with oif in dst lookups for IPv6")
      is missing the checks on FLOWI_FLAG_SKIP_NH_OIF. Add them.
      
      Fixes: 42a7b32b ("xfrm: Add oif to dst lookups")
      Cc: Steffen Klassert <steffen.klassert@secunet.com>
      Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
      Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f1900fb5
    • J
      tipc: extend broadcast link window size · 53387c4e
      Jon Paul Maloy 提交于
      The default fix broadcast window size is currently set to 20 packets.
      This is a very low value, set at a time when we were still testing on
      10 Mb/s hubs, and a change to it is long overdue.
      
      Commit 7845989c ("net: tipc: fix stall during bclink wakeup procedure")
      revealed a problem with this low value. For messages of importance LOW,
      the backlog queue limit will be  calculated to 30 packets, while a
      single, maximum sized message of 66000 bytes, carried across a 1500 MTU
      network consists of 46 packets.
      
      This leads to the following scenario (among others leading to the same
      situation):
      
      1: Msg 1 of 46 packets is sent. 20 packets go to the transmit queue, 26
         packets to the backlog queue.
      2: Msg 2 of 46 packets is attempted sent, but rejected because there is
         no more space in the backlog queue at this level. The sender is added
         to the wakeup queue with a "pending packets chain size" number of 46.
      3: Some packets in the transmit queue are acked and released. We try to
         wake up the sender, but the pending size of 46 is bigger than the LOW
         wakeup limit of 30, so this doesn't happen.
      5: Subsequent acks releases all the remaining buffers. Each time we test
         for the wakeup criteria and find that 46 still is larger than 30,
         even after both the transmit and the backlog queues are empty.
      6: The sender is never woken up and given a chance to send its message.
         He is stuck.
      
      We could now loosen the wakeup criteria (used by link_prepare_wakeup())
      to become equal to the send criteria (used by tipc_link_xmit()), i.e.,
      by ignoring the "pending packets chain size" value altogether, or we can
      just increase the queue limits so that the criteria can be satisfied
      anyway. There are good reasons (potentially multiple waiting senders) to
      not opt for the former solution, so we choose the latter one.
      
      This commit fixes the problem by giving the broadcast link window a
      default value of 50 packets. We also introduce a new minimum link
      window size BCLINK_MIN_WIN of 32, which is enough to always avoid the
      described situation. Finally, in order to not break any existing users
      which may set the window explicitly, we enforce that the window is set
      to the new minimum value in case the user is trying to set it to
      anything lower.
      
      Fixes: 7845989c ("net: tipc: fix stall during bclink wakeup procedure")
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      53387c4e
  3. 21 10月, 2015 10 次提交
  4. 20 10月, 2015 1 次提交
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 1099f860
      Linus Torvalds 提交于
      Pull networking fixes from David Miller:
      
       1) Account for extra headroom in ath9k driver, from Felix Fietkau.
      
       2) Fix OOPS in pppoe driver due to incorrect socket state transition,
          from Guillaume Nault.
      
       3) Kill memory leak in amd-xgbe debugfx, from Geliang Tang.
      
       4) Power management fixes for iwlwifi, from Johannes Berg.
      
       5) Fix races in reqsk_queue_unlink(), from Eric Dumazet.
      
       6) Fix dst_entry usage in ARP replies, from Jiri Benc.
      
       7) Cure OOPSes with SO_GET_FILTER, from Daniel Borkmann.
      
       8) Missing allocation failure check in amd-xgbe, from Tom Lendacky.
      
       9) Various resource allocation/freeing cures in DSA< from Neil
          Armstrong.
      
      10) A series of bug fixes in the openvswitch conntrack support, from
          Joe Stringer.
      
      11) Fix two cases (BPF and act_mirred) where we have to clean the sender
          cpu stored in the SKB before transmitting.  From WANG Cong and
          Alexei Starovoitov.
      
      12) Disable VLAN filtering in promiscuous mode in mlx5 driver, from
          Achiad Shochat.
      
      13) Older bnx2x chips cannot do 4-tuple UDP hashing, so prevent this
          configuration via ethtool.  From Yuval Mintz.
      
      14) Don't call rt6_uncached_list_flush_dev() from rt6_ifdown() when
          'dev' is NULL, from Eric Biederman.
      
      15) Prevent stalled link synchronization in tipc, from Jon Paul Maloy.
      
      16) kcalloc() gstrings ethtool buffer before having driver fill it in,
          in order to prevent kernel memory leaking.  From Joe Perches.
      
      17) Fix mixxing rt6_info initialization for blackhole routes, from
          Martin KaFai Lau.
      
      18) Kill VLAN regression in via-rhine, from Andrej Ota.
      
      19) Missing pfmemalloc check in sk_add_backlog(), from Eric Dumazet.
      
      20) Fix spurious MSG_TRUNC signalling in netlink dumps, from Ronen Arad.
      
      21) Scrube SKBs when pushing them between namespaces in openvswitch,
          from Joe Stringer.
      
      22) bcmgenet enables link interrupts too early, fix from Florian
          Fainelli.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (92 commits)
        net: bcmgenet: Fix early link interrupt enabling
        tunnels: Don't require remote endpoint or ID during creation.
        openvswitch: Scrub skb between namespaces
        xen-netback: correctly check failed allocation
        net: asix: add support for the Billionton GUSB2AM-1G-B USB adapter
        netlink: Trim skb to alloc size to avoid MSG_TRUNC
        net: add pfmemalloc check in sk_add_backlog()
        via-rhine: fix VLAN receive handling regression.
        ipv6: Initialize rt6_info properly in ip6_blackhole_route()
        ipv6: Move common init code for rt6_info to a new function rt6_info_init()
        Bluetooth: Fix initializing conn_params in scan phase
        Bluetooth: Fix conn_params list update in hci_connect_le_scan_cleanup
        Bluetooth: Fix remove_device behavior for explicit connects
        Bluetooth: Fix LE reconnection logic
        Bluetooth: Fix reference counting for LE-scan based connections
        Bluetooth: Fix double scan updates
        mlxsw: core: Fix race condition in __mlxsw_emad_transmit
        tipc: move fragment importance field to new header position
        ethtool: Use kcalloc instead of kmalloc for ethtool_get_strings
        tipc: eliminate risk of stalled link synchronization
        ...
      1099f860