Not every CLC proposal message needs the maximum buffer length.
Due to the MSG_WAITALL flag, it is important to use the peeked
real length when receiving the message.

Fixes: d63d271c ("smc: switch to sock_recvmsg()")
Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

llc_conn_send_pdu() pushes the skb into write queue and
calls llc_conn_send_pdus() to flush them out. However, the
status of dev_queue_xmit() is not returned to caller,
in this case, llc_conn_state_process().

llc_conn_state_process() needs hold the skb no matter
success or failure, because it still uses it after that,
therefore we should hold skb before dev_queue_xmit() when
that skb is the one being processed by llc_conn_state_process().

For other callers, they can just pass NULL and ignore
the return value as they are.
Reported-by: NNoam Rathaus <noamr@beyondsecurity.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2018-03-23

The following series includes fixes for mlx5 netdev and eswitch.

v1->v2:
    - Fixed commit message quotation marks in patch #7

For -stable v4.12
    ('net/mlx5e: Avoid using the ipv6 stub in the TC offload neigh update path')
    ('net/mlx5e: Fix traffic being dropped on VF representor')

For -stable v4.13
    ('net/mlx5e: Fix memory usage issues in offloading TC flows')
    ('net/mlx5e: Verify coalescing parameters in range')

For -stable v4.14
    ('net/mlx5e: Don't override vport admin link state in switchdev mode')

For -stable v4.15
    ('108b2b6d5c02 net/mlx5e: Sync netdev vxlan ports at open')

Please pull and let me know if there's any problem.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

strp_parser_err is called with a negative code everywhere, which then
calls abort_parser with a negative code.  strp_msg_timeout calls
abort_parser directly with a positive code.  Negate ETIMEDOUT
to match signed-ness of other calls.

The default abort_parser callback, strp_abort_strp, sets
sk->sk_err to err.  Also negate the error here so sk_err always
holds a positive value, as the rest of the net code expects.  Currently
a negative sk_err can result in endless loops, or user code that
thinks it actually sent/received err bytes.

Found while testing net/tls_sw recv path.

Fixes: 43a0c675 ("strparser: Stream parser for messages")
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes a bug in the tcf_dump_walker function that can cause some actions
to not be reported when dumping a large number of actions. This issue
became more aggrevated when cookies feature was added. In particular
this issue is manifest when large cookie values are assigned to the
actions and when enough actions are created that the resulting table
must be dumped in multiple batches.

The number of actions returned in each batch is limited by the total
number of actions and the memory buffer size.  With small cookies
the numeric limit is reached before the buffer size limit, which avoids
the code path triggering this bug. When large cookies are used buffer
fills before the numeric limit, and the erroneous code path is hit.

For example after creating 32 csum actions with the cookie
aaaabbbbccccdddd

$ tc actions ls action csum
total acts 26

    action order 0: csum (tcp) action continue
    index 1 ref 1 bind 0
    cookie aaaabbbbccccdddd

    .....

    action order 25: csum (tcp) action continue
    index 26 ref 1 bind 0
    cookie aaaabbbbccccdddd
total acts 6

    action order 0: csum (tcp) action continue
    index 28 ref 1 bind 0
    cookie aaaabbbbccccdddd

    ......

    action order 5: csum (tcp) action continue
    index 32 ref 1 bind 0
    cookie aaaabbbbccccdddd

Note that the action with index 27 is omitted from the report.

Fixes: 4b3550ef ("[NET_SCHED]: Use nla_nest_start/nla_nest_end")"
Signed-off-by: NCraig Dillabaugh <cdillaba@mojatatu.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pci_set_drvdata() is called only after registering the net_device,
therefore we could run into a NPE if one of the functions using
driver_data is called before it's set.

Fix this by calling pci_set_drvdata() before registering the
net_device.

This fix is a candidate for stable. As far as I can see the
bug has been there in kernel version 3.2 already, therefore
I can't provide a reference which commit is fixed by it.

The fix may need small adjustments per kernel version because
due to other changes the label which is jumped to if
register_netdev() fails has changed over time.
Reported-by: NDavid Miller <davem@davemloft.net>
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb mac header is not necessarily set at the time skb_network_protocol()
is called. Use skb->data instead.

BUG: KASAN: slab-out-of-bounds in skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739
Read of size 2 at addr ffff8801b3097a0b by task syz-executor5/14242

CPU: 1 PID: 14242 Comm: syz-executor5 Not tainted 4.16.0-rc6+ #280
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x24d lib/dump_stack.c:53
 print_address_description+0x73/0x250 mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report+0x23c/0x360 mm/kasan/report.c:412
 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:443
 skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739
 harmonize_features net/core/dev.c:2924 [inline]
 netif_skb_features+0x509/0x9b0 net/core/dev.c:3011
 validate_xmit_skb+0x81/0xb00 net/core/dev.c:3084
 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3142
 packet_direct_xmit+0x117/0x790 net/packet/af_packet.c:256
 packet_snd net/packet/af_packet.c:2944 [inline]
 packet_sendmsg+0x3aed/0x60b0 net/packet/af_packet.c:2969
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:639
 ___sys_sendmsg+0x767/0x8b0 net/socket.c:2047
 __sys_sendmsg+0xe5/0x210 net/socket.c:2081

Fixes: 19acc327 ("gso: Handle Trans-Ether-Bridging protocol in skb_network_protocol()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Pravin B Shelar <pshelar@ovn.org>
Reported-by: NReported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This modem is embedded on dlink dwr-921 router.
    The oem configuration states:

    T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
    D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
    P:  Vendor=1435 ProdID=0918 Rev= 2.32
    S:  Manufacturer=Android
    S:  Product=Android
    S:  SerialNumber=0123456789ABCDEF
    C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
    I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
    E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
    E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
    E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
    E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
    E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
    E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Tested on openwrt distribution
Signed-off-by: NGiuseppe Lippolis <giu.lippolis@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

 - fix multicast-via-unicast transmissions for AP isolation and gateway
   extension, by Linus Luessing (2 patches)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When mlx5_core is loaded it is expected to sync ports
with all vxlan devices so it can support vxlan encap/decap.
This is done via udp_tunnel_get_rx_info(). Currently this
call is set in mlx5e_nic_enable() and if the netdev is not in
NETREG_REGISTERED state it will not be called.

Normally on load the netdev state is not NETREG_REGISTERED
so udp_tunnel_get_rx_info() will not be called.

Moving udp_tunnel_get_rx_info() to mlx5e_open() so
it will be called on netdev UP event and allow encap/decap.

Fixes: 610e89e0 ("net/mlx5e: Don't sync netdev state when not registered")
Signed-off-by: NShahar Klein <shahark@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Currently we use the global ipv6_stub var to access the ipv6 global
nd table. This practice gets us to troubles when the stub is only partially
set e.g when ipv6 is loaded under the disabled policy. In this case, as of commit
343d60aa ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument")
the stub is not null, but stub->nd_tbl is and we crash.

As we can access the ipv6 nd_tbl directly, the fix is just to avoid the
reference through the stub. There is one place in the code where we
issue ipv6 route lookup and keep doing it through the stub, but that
mentioned commit makes sure we get -EAFNOSUPPORT from the stack.

Fixes: 232c0013 ("net/mlx5e: Add support to neighbour update flow")
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NAviv Heller <avivh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

For NIC flows, the parsed attributes are not freed when we exit
successfully from mlx5e_configure_flower().

There is possible double free for eswitch flows. If error is returned
from rhashtable_insert_fast(), the parse attrs will be freed in
mlx5e_tc_del_flow(), but they will be freed again before exiting
mlx5e_configure_flower().

To fix both issues we do the following:
(1) change the condition that determines if to issue the free call to
    check if this flow is NIC flow, or it does not have encap action.
(2) reorder the code such that that the check and free calls are done
    before we attempt to add into the hash table.

Fixes: 232c0013 ('net/mlx5e: Add support to neighbour update flow')
Signed-off-by: NJianbo Liu <jianbol@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Increase representor netdev RQ size to avoid dropped packets.
The current size (two) is just too small to keep up with
conventional slow path traffic patterns.
Also match the SQ size to the RQ size.

Fixes: cb67b832 ("net/mlx5e: Introduce SRIOV VF representors")
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NPaul Blakey <paulb@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add check of coalescing parameters received through ethtool are within
range of values supported by the HW.
Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the
users through ethtool. The ethtool support up to 32 bit value for each.
However, mlx5 modify cq limits the coalescing time parameter to 12 bit
and coalescing frames parameters to 16 bits.
Return out of range error if user tries to set these parameters to
higher values.

Fixes: f62b8bb8 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality')
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add dependancy for switchdev to be congfigured as any user-space control
plane SW is expected to use the HW switchdev ID to locate the representors
related to VFs of a certain PF and apply SW/offloaded switching on them.

Fixes: e80541ec ('net/mlx5: Add CONFIG_MLX5_ESWITCH Kconfig')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

SQs are 32 and not 16 bits, hence it's wrong to use only 16 bits to
store the sq number for which are going to set steering rule, fix that.

Fixes: cb67b832 ('net/mlx5e: Introduce SRIOV VF representors')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The vport admin original link state will be re-applied after returning
back to legacy mode, it is not right to change the admin link state value
when in switchdev mode.

Use direct vport commands to alter logical vport state in netdev
representor open/close flows rather than the administrative eswitch API.

Fixes: 20a1ea67 ('net/mlx5e: Support VF vport link state control for SRIOV switchdev mode')
Signed-off-by: NJianbo Liu <jianbol@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

It's required to create a modules.alias via MODULE_DEVICE_TABLE helper
for the OF platform driver. Otherwise, module autoloading cannot work.
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MODULE_ALIAS exports information to allow the module to be auto-loaded at
boot for the drivers registered using legacy platform registration.

However, currently the driver is always used by DT-only platform,
MODULE_ALIAS is redundant and should be removed properly.
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We try to hold TX virtqueue mutex in vhost_net_rx_peek_head_len()
after RX virtqueue mutex is held in handle_rx(). This requires an
appropriate lock nesting notation to calm down deadlock detector.

Fixes: 03088137 ("vhost_net: basic polling support")
Reported-by: syzbot+7f073540b1384a614e09@syzkaller.appspotmail.com
Signed-off-by: NJason Wang <jasowang@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is needed to support the modem found in HP EliteBook 820 G3.
Signed-off-by: NTorsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The same fix as in 'bonding: move dev_mc_sync after master_upper_dev_link
in bond_enslave' is needed for team driver.

The panic can be reproduced easily:

  ip link add team1 type team
  ip link set team1 up
  ip link add link team1 vlan1 type vlan id 80
  ip link set vlan1 master team1

Fixes: cb41c997 ("team: team should sync the port's uc/mc addrs when add a port")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Xin Long says:

====================
bonding: a bunch of fixes for dev hwaddr sync in bond_enslave

This patchset is mainly to fix a crash when adding vlan as slave of
bond which is also the parent link in patch 2/3,  and also fix some
err process problems in bond_enslave in patch 1/3 and 3/3.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When dev_set_promiscuity(1) succeeds but dev_set_allmulti(1) fails,
dev_set_promiscuity(-1) should be done before going to the err path.
Otherwise, dev->promiscuity will leak.

Fixes: 7e1a1ac1 ("bonding: Check return of dev_set_promiscuity/allmulti")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Beniamino found a crash when adding vlan as slave of bond which is also
the parent link:

  ip link add bond1 type bond
  ip link set bond1 up
  ip link add link bond1 vlan1 type vlan id 80
  ip link set vlan1 master bond1

The call trace is as below:

  [<ffffffffa850842a>] queued_spin_lock_slowpath+0xb/0xf
  [<ffffffffa8515680>] _raw_spin_lock+0x20/0x30
  [<ffffffffa83f6f07>] dev_mc_sync+0x37/0x80
  [<ffffffffc08687dc>] vlan_dev_set_rx_mode+0x1c/0x30 [8021q]
  [<ffffffffa83efd2a>] __dev_set_rx_mode+0x5a/0xa0
  [<ffffffffa83f7138>] dev_mc_sync_multiple+0x78/0x80
  [<ffffffffc084127c>] bond_enslave+0x67c/0x1190 [bonding]
  [<ffffffffa8401909>] do_setlink+0x9c9/0xe50
  [<ffffffffa8403bf2>] rtnl_newlink+0x522/0x880
  [<ffffffffa8403ff7>] rtnetlink_rcv_msg+0xa7/0x260
  [<ffffffffa8424ecb>] netlink_rcv_skb+0xab/0xc0
  [<ffffffffa83fe498>] rtnetlink_rcv+0x28/0x30
  [<ffffffffa8424850>] netlink_unicast+0x170/0x210
  [<ffffffffa8424bf8>] netlink_sendmsg+0x308/0x420
  [<ffffffffa83cc396>] sock_sendmsg+0xb6/0xf0

This is actually a dead lock caused by sync slave hwaddr from master when
the master is the slave's 'slave'. This dead loop check is actually done
by netdev_master_upper_dev_link. However, Commit 1f718f0f ("bonding:
populate neighbour's private on enslave") moved it after dev_mc_sync.

This patch is to fix it by moving dev_mc_sync after master_upper_dev_link,
so that this loop check would be earlier than dev_mc_sync. It also moves
if (mode == BOND_MODE_8023AD) into if (!bond_uses_primary) clause as an
improvement.

Note team driver also has this issue, I will fix it in another patch.

Fixes: 1f718f0f ("bonding: populate neighbour's private on enslave")
Reported-by: NBeniamino Galvani <bgalvani@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

vlan_vids_add_by_dev is called right after dev hwaddr sync, so on
the err path it should unsync dev hwaddr. Otherwise, the slave
dev's hwaddr will never be unsync when this err happens.

Fixes: 1ff412ad ("bonding: change the bond's vlan syncing functions with the standard ones")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After the qdisc lock was dropped in pfifo_fast we allow multiple
enqueue threads and dequeue threads to run in parallel. On the
enqueue side the skb bit ooo_okay is used to ensure all related
skbs are enqueued in-order. On the dequeue side though there is
no similar logic. What we observe is with fewer queues than CPUs
it is possible to re-order packets when two instances of
__qdisc_run() are running in parallel. Each thread will dequeue
a skb and then whichever thread calls the ndo op first will
be sent on the wire. This doesn't typically happen because
qdisc_run() is usually triggered by the same core that did the
enqueue. However, drivers will trigger __netif_schedule()
when queues are transitioning from stopped to awake using the
netif_tx_wake_* APIs. When this happens netif_schedule() calls
qdisc_run() on the same CPU that did the netif_tx_wake_* which
is usually done in the interrupt completion context. This CPU
is selected with the irq affinity which is unrelated to the
enqueue operations.

To resolve this we add a RUNNING bit to the qdisc to ensure
only a single dequeue per qdisc is running. Enqueue and dequeue
operations can still run in parallel and also on multi queue
NICs we can still have a dequeue in-flight per qdisc, which
is typically per CPU.

Fixes: c5ad119f ("net: sched: pfifo_fast use skb_array")
Reported-by: NJakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem.
Tested hardware BM806U is mounted on D-Link DWR-921-C3 router.
The USB id is added to qmi_wwan.c to allow QMI communication with
the BM806U.

Tested on 4.14 kernel and OpenWRT.
Signed-off-by: NPawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

and switch to https where possible.

All links have been eyeballed to verify that the domains have
not changed, etc.
Signed-off-by: NSanjeev Gupta <ghane0@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2018-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.16

Some fixes for 4.16, only for iwlwifi and brcmfmac this time. All
pretty small.

iwlwifi

* fix an issue with the multicast queue

* fix IGTK handling

* fix some missing return value checks

* add support for a HW workaround for issues on some platforms

* a couple of fixes for channel-switch

* a few fixes for the aggregation handling code

brcmfmac

* drop Inter-Access Point Protocol packets by default

* fix check for ISO3166 regulatory code
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While building ipv6 datagram we currently allow arbitrary large
extheaders, even beyond pmtu size. The syzbot has found a way
to exploit the above to trigger the following splat:

kernel BUG at ./include/linux/skbuff.h:2073!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 4230 Comm: syzkaller672661 Not tainted 4.16.0-rc2+ #326
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__skb_pull include/linux/skbuff.h:2073 [inline]
RIP: 0010:__ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636
RSP: 0018:ffff8801bc18f0f0 EFLAGS: 00010293
RAX: ffff8801b17400c0 RBX: 0000000000000738 RCX: ffffffff84f01828
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8801b415ac18
RBP: ffff8801bc18f360 R08: ffff8801b4576844 R09: 0000000000000000
R10: ffff8801bc18f380 R11: ffffed00367aee4e R12: 00000000000000d6
R13: ffff8801b415a740 R14: dffffc0000000000 R15: ffff8801b45767c0
FS:  0000000001535880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002000b000 CR3: 00000001b4123001 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  ip6_finish_skb include/net/ipv6.h:969 [inline]
  udp_v6_push_pending_frames+0x269/0x3b0 net/ipv6/udp.c:1073
  udpv6_sendmsg+0x2a96/0x3400 net/ipv6/udp.c:1343
  inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:764
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg+0xca/0x110 net/socket.c:640
  ___sys_sendmsg+0x320/0x8b0 net/socket.c:2046
  __sys_sendmmsg+0x1ee/0x620 net/socket.c:2136
  SYSC_sendmmsg net/socket.c:2167 [inline]
  SyS_sendmmsg+0x35/0x60 net/socket.c:2162
  do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x4404c9
RSP: 002b:00007ffdce35f948 EFLAGS: 00000217 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004404c9
RDX: 0000000000000003 RSI: 0000000020001f00 RDI: 0000000000000003
RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 0000000020000080 R11: 0000000000000217 R12: 0000000000401df0
R13: 0000000000401e80 R14: 0000000000000000 R15: 0000000000000000
Code: ff e8 1d 5e b9 fc e9 15 e9 ff ff e8 13 5e b9 fc e9 44 e8 ff ff e8 29
5e b9 fc e9 c0 e6 ff ff e8 3f f3 80 fc 0f 0b e8 38 f3 80 fc <0f> 0b 49 8d
87 80 00 00 00 4d 8d 87 84 00 00 00 48 89 85 20 fe
RIP: __skb_pull include/linux/skbuff.h:2073 [inline] RSP: ffff8801bc18f0f0
RIP: __ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP:
ffff8801bc18f0f0

As stated by RFC 7112 section 5:

   When a host fragments an IPv6 datagram, it MUST include the entire
   IPv6 Header Chain in the First Fragment.

So this patch addresses the issue dropping datagrams with excessive
extheader length. It also updates the error path to report to the
calling socket nonnegative pmtu values.

The issue apparently predates git history.

v1 -> v2: cleanup error path, as per Eric's suggestion

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+91e6f9932ff122fa4410@syzkaller.appspotmail.com
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

KMSAN reports use of uninitialized memory in the case when |alen| is
smaller than sizeof(struct sockaddr_nl), and therefore |nladdr| isn't
fully copied from the userspace.
Signed-off-by: NAlexander Potapenko <glider@google.com>
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Description:
EEE does not work with lan7800 when AutoSpeed is not set.
(This can happen when EEPROM is not populated or configured incorrectly)

Root-Cause:
When EEE is enabled, the mac config register ASD is not set
i.e. in default state, causing EEE fail.

Fix:
Set the register when eeprom is not present.

Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: NRaghuram Chary J <raghuramchary.jallipalli@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the SMC experimental TCP option in a SYN packet is lost on
the server side when SYN Cookies are active. However, the corresponding
SYNACK sent back to the client contains the SMC option. This causes an
inconsistent view of the SMC capabilities on the client and server.

This patch disables the SMC option in the SYNACK when SYN Cookies are
active to avoid this issue.

Fixes: 60e2a778 ("tcp: TCP experimental option for SMC")
Signed-off-by: NHans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree,
they are:

1) Don't pick fixed hash implementation for NFT_SET_EVAL sets, otherwise
   userspace hits EOPNOTSUPP with valid rules using the meter statement,
   from Florian Westphal.

2) If you send a batch that flushes the existing ruleset (that contains
   a NAT chain) and the new ruleset definition comes with a new NAT
   chain, don't bogusly hit EBUSY. Also from Florian.

3) Missing netlink policy attribute validation, from Florian.

4) Detach conntrack template from skbuff if IP_NODEFRAG is set on,
   from Paolo Abeni.

5) Cache device names in flowtable object, otherwise we may end up
   walking over devices going aways given no rtnl_lock is held.

6) Fix incorrect net_device ingress with ingress hooks.

7) Fix crash when trying to read more data than available in UDP
   packets from the nf_socket infrastructure, from Subash.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_header_pointer will copy data into a buffer if data is non linear,
otherwise it will return a pointer in the linear section of the data.
nf_sk_lookup_slow_v{4,6} always copies data of size udphdr but later
accesses memory within the size of tcphdr (th->doff) in case of TCP
packets. This causes a crash when running with KASAN with the following
call stack -

BUG: KASAN: stack-out-of-bounds in xt_socket_lookup_slow_v4+0x524/0x718
net/netfilter/xt_socket.c:178
Read of size 2 at addr ffffffe3d417a87c by task syz-executor/28971
CPU: 2 PID: 28971 Comm: syz-executor Tainted: G    B   W  O    4.9.65+ #1
Call trace:
[<ffffff9467e8d390>] dump_backtrace+0x0/0x428 arch/arm64/kernel/traps.c:76
[<ffffff9467e8d7e0>] show_stack+0x28/0x38 arch/arm64/kernel/traps.c:226
[<ffffff946842d9b8>] __dump_stack lib/dump_stack.c:15 [inline]
[<ffffff946842d9b8>] dump_stack+0xd4/0x124 lib/dump_stack.c:51
[<ffffff946811d4b0>] print_address_description+0x68/0x258 mm/kasan/report.c:248
[<ffffff946811d8c8>] kasan_report_error mm/kasan/report.c:347 [inline]
[<ffffff946811d8c8>] kasan_report.part.2+0x228/0x2f0 mm/kasan/report.c:371
[<ffffff946811df44>] kasan_report+0x5c/0x70 mm/kasan/report.c:372
[<ffffff946811bebc>] check_memory_region_inline mm/kasan/kasan.c:308 [inline]
[<ffffff946811bebc>] __asan_load2+0x84/0x98 mm/kasan/kasan.c:739
[<ffffff94694d6f04>] __tcp_hdrlen include/linux/tcp.h:35 [inline]
[<ffffff94694d6f04>] xt_socket_lookup_slow_v4+0x524/0x718 net/netfilter/xt_socket.c:178

Fix this by copying data into appropriate size headers based on protocol.

Fixes: a583636a ("inet: refactor inet[6]_lookup functions to take skb")
Signed-off-by: NTejaswi Tanikella <tejaswit@codeaurora.org>
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

DHCP connectivity issues can currently occur if the following conditions
are met:

1) A DHCP packet from a client to a server
2) This packet has a multicast destination
3) This destination has a matching entry in the translation table
   (FF:FF:FF:FF:FF:FF for IPv4, 33:33:00:01:00:02/33:33:00:01:00:03
    for IPv6)
4) The orig-node determined by TT for the multicast destination
   does not match the orig-node determined by best-gateway-selection

In this case the DHCP packet will be dropped.

The "gateway-out-of-range" check is supposed to only be applied to
unicasted DHCP packets to a specific DHCP server.

In that case dropping the the unicasted frame forces the client to
retry via a broadcasted one, but now directed to the new best
gateway.

A DHCP packet with broadcast/multicast destination is already ensured to
always be delivered to the best gateway. Dropping a multicasted
DHCP packet here will only prevent completing DHCP as there is no
other fallback.

So far, it seems the unicast check was implicitly performed by
expecting the batadv_transtable_search() to return NULL for multicast
destinations. However, a multicast address could have always ended up in
the translation table and in fact is now common.

To fix this potential loss of a DHCP client-to-server packet to a
multicast address this patch adds an explicit multicast destination
check to reliably bail out of the gateway-out-of-range check for such
destinations.

The issue and fix were tested in the following three node setup:

- Line topology, A-B-C
- A: gateway client, DHCP client
- B: gateway server, hop-penalty increased: 30->60, DHCP server
- C: gateway server, code modifications to announce FF:FF:FF:FF:FF:FF

Without this patch, A would never transmit its DHCP Discover packet
due to an always "out-of-range" condition. With this patch,
a full DHCP handshake between A and B was possible again.

Fixes: be7af5cf ("batman-adv: refactoring gateway handling code")
Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

For multicast frames AP isolation is only supposed to be checked on
the receiving nodes and never on the originating one.

Furthermore, the isolation or wifi flag bits should only be intepreted
as such for unicast and never multicast TT entries.

By injecting flags to the multicast TT entry claimed by a single
target node it was verified in tests that this multicast address
becomes unreachable, leading to packet loss.

Omitting the "src" parameter to the batadv_transtable_search() call
successfully skipped the AP isolation check and made the target
reachable again.

Fixes: 1d8ab8d3 ("batman-adv: Modified forwarding behaviour for multicast packets")
Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

syzbot reported a LOCKDEP splat [1] in rt6_age_examine_exception()

rt6_age_examine_exception() is called while rt6_exception_lock is held.
This lock is the lower one in the lock hierarchy, thus we can not
call dst_neigh_lookup() function, as it can fallback to neigh_create()

We should instead do a pure RCU lookup. As a bonus we avoid
a pair of atomic operations on neigh refcount.

[1]

WARNING: possible circular locking dependency detected
4.16.0-rc4+ #277 Not tainted

syz-executor7/4015 is trying to acquire lock:
 (&ndev->lock){++--}, at: [<00000000416dce19>] __ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928

but task is already holding lock:
 (&tbl->lock){++-.}, at: [<00000000b5cb1d65>] neigh_ifdown+0x3d/0x250 net/core/neighbour.c:292

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&tbl->lock){++-.}:
       __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
       _raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312
       __neigh_create+0x87e/0x1d90 net/core/neighbour.c:528
       neigh_create include/net/neighbour.h:315 [inline]
       ip6_neigh_lookup+0x9a7/0xba0 net/ipv6/route.c:228
       dst_neigh_lookup include/net/dst.h:405 [inline]
       rt6_age_examine_exception net/ipv6/route.c:1609 [inline]
       rt6_age_exceptions+0x381/0x660 net/ipv6/route.c:1645
       fib6_age+0xfb/0x140 net/ipv6/ip6_fib.c:2033
       fib6_clean_node+0x389/0x580 net/ipv6/ip6_fib.c:1919
       fib6_walk_continue+0x46c/0x8a0 net/ipv6/ip6_fib.c:1845
       fib6_walk+0x91/0xf0 net/ipv6/ip6_fib.c:1893
       fib6_clean_tree+0x1e6/0x340 net/ipv6/ip6_fib.c:1970
       __fib6_clean_all+0x1f4/0x3a0 net/ipv6/ip6_fib.c:1986
       fib6_clean_all net/ipv6/ip6_fib.c:1997 [inline]
       fib6_run_gc+0x16b/0x3c0 net/ipv6/ip6_fib.c:2053
       ndisc_netdev_event+0x3c2/0x4a0 net/ipv6/ndisc.c:1781
       notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
       __raw_notifier_call_chain kernel/notifier.c:394 [inline]
       raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
       call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
       call_netdevice_notifiers net/core/dev.c:1725 [inline]
       __dev_notify_flags+0x262/0x430 net/core/dev.c:6960
       dev_change_flags+0xf5/0x140 net/core/dev.c:6994
       devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080
       inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919
       sock_do_ioctl+0xef/0x390 net/socket.c:957
       sock_ioctl+0x36b/0x610 net/socket.c:1081
       vfs_ioctl fs/ioctl.c:46 [inline]
       do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
       SYSC_ioctl fs/ioctl.c:701 [inline]
       SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
       do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
       entry_SYSCALL_64_after_hwframe+0x42/0xb7

-> #2 (rt6_exception_lock){+.-.}:
       __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
       _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168
       spin_lock_bh include/linux/spinlock.h:315 [inline]
       rt6_flush_exceptions+0x21/0x210 net/ipv6/route.c:1367
       fib6_del_route net/ipv6/ip6_fib.c:1677 [inline]
       fib6_del+0x624/0x12c0 net/ipv6/ip6_fib.c:1761
       __ip6_del_rt+0xc7/0x120 net/ipv6/route.c:2980
       ip6_del_rt+0x132/0x1a0 net/ipv6/route.c:2993
       __ipv6_dev_ac_dec+0x3b1/0x600 net/ipv6/anycast.c:332
       ipv6_dev_ac_dec net/ipv6/anycast.c:345 [inline]
       ipv6_sock_ac_close+0x2b4/0x3e0 net/ipv6/anycast.c:200
       inet6_release+0x48/0x70 net/ipv6/af_inet6.c:433
       sock_release+0x8d/0x1e0 net/socket.c:594
       sock_close+0x16/0x20 net/socket.c:1149
       __fput+0x327/0x7e0 fs/file_table.c:209
       ____fput+0x15/0x20 fs/file_table.c:243
       task_work_run+0x199/0x270 kernel/task_work.c:113
       exit_task_work include/linux/task_work.h:22 [inline]
       do_exit+0x9bb/0x1ad0 kernel/exit.c:865
       do_group_exit+0x149/0x400 kernel/exit.c:968
       get_signal+0x73a/0x16d0 kernel/signal.c:2469
       do_signal+0x90/0x1e90 arch/x86/kernel/signal.c:809
       exit_to_usermode_loop+0x258/0x2f0 arch/x86/entry/common.c:162
       prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
       syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
       do_syscall_64+0x6ec/0x940 arch/x86/entry/common.c:292
       entry_SYSCALL_64_after_hwframe+0x42/0xb7

-> #1 (&(&tb->tb6_lock)->rlock){+.-.}:
       __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
       _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168
       spin_lock_bh include/linux/spinlock.h:315 [inline]
       __ip6_ins_rt+0x56/0x90 net/ipv6/route.c:1007
       ip6_route_add+0x141/0x190 net/ipv6/route.c:2955
       addrconf_prefix_route+0x44f/0x620 net/ipv6/addrconf.c:2359
       fixup_permanent_addr net/ipv6/addrconf.c:3368 [inline]
       addrconf_permanent_addr net/ipv6/addrconf.c:3391 [inline]
       addrconf_notify+0x1ad2/0x2310 net/ipv6/addrconf.c:3460
       notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
       __raw_notifier_call_chain kernel/notifier.c:394 [inline]
       raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
       call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
       call_netdevice_notifiers net/core/dev.c:1725 [inline]
       __dev_notify_flags+0x15d/0x430 net/core/dev.c:6958
       dev_change_flags+0xf5/0x140 net/core/dev.c:6994
       do_setlink+0xa22/0x3bb0 net/core/rtnetlink.c:2357
       rtnl_newlink+0xf37/0x1a50 net/core/rtnetlink.c:2965
       rtnetlink_rcv_msg+0x57f/0xb10 net/core/rtnetlink.c:4641
       netlink_rcv_skb+0x14b/0x380 net/netlink/af_netlink.c:2444
       rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4659
       netlink_unicast_kernel net/netlink/af_netlink.c:1308 [inline]
       netlink_unicast+0x4c4/0x6b0 net/netlink/af_netlink.c:1334
       netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1897
       sock_sendmsg_nosec net/socket.c:629 [inline]
       sock_sendmsg+0xca/0x110 net/socket.c:639
       ___sys_sendmsg+0x767/0x8b0 net/socket.c:2047
       __sys_sendmsg+0xe5/0x210 net/socket.c:2081
       SYSC_sendmsg net/socket.c:2092 [inline]
       SyS_sendmsg+0x2d/0x50 net/socket.c:2088
       do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
       entry_SYSCALL_64_after_hwframe+0x42/0xb7

-> #0 (&ndev->lock){++--}:
       lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920
       __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
       _raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312
       __ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928
       ipv6_dev_mc_dec+0x110/0x1f0 net/ipv6/mcast.c:961
       pndisc_destructor+0x21a/0x340 net/ipv6/ndisc.c:392
       pneigh_ifdown net/core/neighbour.c:695 [inline]
       neigh_ifdown+0x149/0x250 net/core/neighbour.c:294
       rt6_disable_ip+0x537/0x700 net/ipv6/route.c:3874
       addrconf_ifdown+0x14b/0x14f0 net/ipv6/addrconf.c:3633
       addrconf_notify+0x5f8/0x2310 net/ipv6/addrconf.c:3557
       notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
       __raw_notifier_call_chain kernel/notifier.c:394 [inline]
       raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
       call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
       call_netdevice_notifiers net/core/dev.c:1725 [inline]
       __dev_notify_flags+0x262/0x430 net/core/dev.c:6960
       dev_change_flags+0xf5/0x140 net/core/dev.c:6994
       devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080
       inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919
       packet_ioctl+0x1ff/0x310 net/packet/af_packet.c:4066
       sock_do_ioctl+0xef/0x390 net/socket.c:957
       sock_ioctl+0x36b/0x610 net/socket.c:1081
       vfs_ioctl fs/ioctl.c:46 [inline]
       do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
       SYSC_ioctl fs/ioctl.c:701 [inline]
       SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
       do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
       entry_SYSCALL_64_after_hwframe+0x42/0xb7

other info that might help us debug this:

Chain exists of:
  &ndev->lock --> rt6_exception_lock --> &tbl->lock

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&tbl->lock);
                               lock(rt6_exception_lock);
                               lock(&tbl->lock);
  lock(&ndev->lock);

 *** DEADLOCK ***

2 locks held by syz-executor7/4015:
 #0:  (rtnl_mutex){+.+.}, at: [<00000000a2f16daa>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74
 #1:  (&tbl->lock){++-.}, at: [<00000000b5cb1d65>] neigh_ifdown+0x3d/0x250 net/core/neighbour.c:292

stack backtrace:
CPU: 0 PID: 4015 Comm: syz-executor7 Not tainted 4.16.0-rc4+ #277
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x24d lib/dump_stack.c:53
 print_circular_bug.isra.38+0x2cd/0x2dc kernel/locking/lockdep.c:1223
 check_prev_add kernel/locking/lockdep.c:1863 [inline]
 check_prevs_add kernel/locking/lockdep.c:1976 [inline]
 validate_chain kernel/locking/lockdep.c:2417 [inline]
 __lock_acquire+0x30a8/0x3e00 kernel/locking/lockdep.c:3431
 lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920
 __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
 _raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312
 __ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928
 ipv6_dev_mc_dec+0x110/0x1f0 net/ipv6/mcast.c:961
 pndisc_destructor+0x21a/0x340 net/ipv6/ndisc.c:392
 pneigh_ifdown net/core/neighbour.c:695 [inline]
 neigh_ifdown+0x149/0x250 net/core/neighbour.c:294
 rt6_disable_ip+0x537/0x700 net/ipv6/route.c:3874
 addrconf_ifdown+0x14b/0x14f0 net/ipv6/addrconf.c:3633
 addrconf_notify+0x5f8/0x2310 net/ipv6/addrconf.c:3557
 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
 call_netdevice_notifiers net/core/dev.c:1725 [inline]
 __dev_notify_flags+0x262/0x430 net/core/dev.c:6960
 dev_change_flags+0xf5/0x140 net/core/dev.c:6994
 devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080
 inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919
 packet_ioctl+0x1ff/0x310 net/packet/af_packet.c:4066
 sock_do_ioctl+0xef/0x390 net/socket.c:957
 sock_ioctl+0x36b/0x610 net/socket.c:1081
 vfs_ioctl fs/ioctl.c:46 [inline]
 do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
 SYSC_ioctl fs/ioctl.c:701 [inline]
 SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: c757faa8 ("ipv6: prepare fib6_age() for exception table")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: NWei Wang <weiwan@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Handle changes to MTU in GRE tunnels

Petr says:

When offloading GRE tunnels, the MTU setting is kept fixed after the
initial offload even as the slow-path configuration changed. Worse: the
offloaded MTU setting is actually just a transient value set at the time
of NETDEV_REGISTER of the tunnel. As of commit ffc2b6ee ("ip_gre:
fix IFLA_MTU ignored on NEWLINK"), that transient value is zero, and
unless there's e.g. a VRF migration that prompts re-offload, it stays at
zero, and all GRE packets end up trapping.

Thus, in patch #1, change the way the MTU is changed post-registration,
so that the full event protocol is observed. That way the drivers get to
see the change and have a chance to react.

In the remaining two patches, implement support for MTU change in mlxsw
driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>