Beside the obvious goodness of making code more common, this prevents
a livelock with the next patch which moves interrupt injection out of the
critical section.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Add new-line at end of debug strings.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

If no apic is enabled in the bitmap of an interrupt delivery with delivery
mode of lowest priority, a warning should be reported rather than select
a fallback vcpu
Signed-off-by: NQing He <qing.he@intel.com>
Signed-off-by: NEddie (Yaozu) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch splits kvm_vcpu_ioctl into archtecture independent parts, and
x86 specific parts which go to kvm_arch_vcpu_ioctl in x86.c.

Common ioctls for all architectures are:
KVM_RUN, KVM_GET/SET_(S-)REGS, KVM_TRANSLATE, KVM_INTERRUPT,
KVM_DEBUG_GUEST, KVM_SET_SIGNAL_MASK, KVM_GET/SET_FPU
Note that some PPC chips don't have an FPU, so we might need an #ifdef
around KVM_GET/SET_FPU one day.

x86 specific ioctls are:
KVM_GET/SET_LAPIC, KVM_SET_CPUID, KVM_GET/SET_MSRS

An interresting aspect is vcpu_load/vcpu_put. We now have a common
vcpu_load/put which does the preemption stuff, and an architecture
specific kvm_arch_vcpu_load/put. In the x86 case, this one calls the
vmx/svm function defined in kvm_x86_ops.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Since the mmu uses different shadow pages for dirty large pages and clean
large pages, this allows the mmu to drop ptes that are now invalid.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

This is consistent with real-mode permissions.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

By forcing clean huge pages to be read-only, we have separate roles
for the shadow of a clean large page and the shadow of a dirty large
page.  This is necessary because different ptes will be instantiated
for the two cases, even for read faults.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

We must set the bit before the shift, otherwise the wrong bit gets set.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This is more consistent with the accessed bit management, and makes the dirty
bit available earlier for other purposes.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This time, the biggest change is gpa_to_hpa. The translation of GPA to HPA does
not depend on the VCPU state unlike GVA to GPA so there's no need to pass in
the kvm_vcpu.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Some of the MMU functions take a struct kvm_vcpu even though they affect all
VCPUs.  This patch cleans up some of them to instead take a struct kvm.  This
makes things a bit more clear.

The main thing that was confusing me was whether certain functions need to be
called on all VCPUs.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instead of having the kernel allocate memory to the guest, let userspace
allocate it and pass the address to the kernel.

This is required for s390 support, but also enables features like memory
sharing and using hugetlbfs backed memory.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NMike D. Day <ncmike@ncultra.org>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Since vcpu->apic is of the correct type, there's not need to cast.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Move kvm_create_lapic() into kvm_vcpu_init(), rather than having svm
and vmx do it.  And make it return the error rather than a fairly
random -ENOMEM.

This also solves the problem that neither svm.c nor vmx.c actually
handles the error path properly.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instead of the asymetry of kvm_free_apic, implement kvm_free_lapic().
And guess what?  I found a minor bug: we don't need to hrtimer_cancel()
from kvm_main.c, because we do that in kvm_free_apic().

Also:
1) kvm_vcpu_uninit should be the reverse order from kvm_vcpu_init.
2) Don't set apic->regs_page to zero before freeing apic.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The user is now able to set how many mmu pages will be allocated to the guest.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

When kvm uses user-allocated pages in the future for the guest, we won't
be able to use page->private for rmap, since page->rmap is reserved for
the filesystem.  So we move the rmap base pointers to the memory slot.

A side effect of this is that we need to store the gfn of each gpte in
the shadow pages, since the memory slot is addressed by gfn, instead of
hfn like struct page.
Signed-off-by: NIzik Eidus <izik@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Now that smp_call_function_single() knows how to call a function on the
current cpu, there's no need to check explicitly.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Noted by Eddie Dong.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch modifies the management of REX prefix according behavior
I saw in Xen 3.1.  In Xen, this modification has been introduced by
Jan Beulich.

http://lists.xensource.com/archives/html/xen-changelog/2007-01/msg00081.htmlSigned-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The only valid case is on protected page access, other cases are errors.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NQing He <qing.he@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Remove no_wb, use dst.type = OP_NONE instead, idea stollen from xen-3.1
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Remove _eflags and use directly ctxt->eflags. Caching eflags is not needed as
it is restored to vcpu by kvm_main.c:emulate_instruction() from ctxt->eflags
only if emulation doesn't fail.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

To improve readability, move push, writeback, and grp 1a/2/3/4/5/9 emulation
parts into functions.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch removes the fault injected when the guest attempts to set reserved
bits in cr3.  X86 hardware doesn't generate a fault when setting reserved bits.
The result of this patch is that vmware-server, running within a kvm guest,
boots and runs memtest from an iso.
Signed-off-by: NRyan Harper <ryanh@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

When we allow guest page faults to reach the guests directly, we lose
the fault tracking which allows us to detect demand paging.  So we provide
an alternate mechnism by clearing the accessed bit when we set a pte, and
checking it later to see if the guest actually used it.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

There are two classes of page faults trapped by kvm:
 - host page faults, where the fault is needed to allow kvm to install
   the shadow pte or update the guest accessed and dirty bits
 - guest page faults, where the guest has faulted and kvm simply injects
   the fault back into the guest to handle

The second class, guest page faults, is pure overhead.  We can eliminate
some of it on vmx using the following evil trick:
 - when we set up a shadow page table entry, if the corresponding guest pte
   is not present, set up the shadow pte as not present
 - if the guest pte _is_ present, mark the shadow pte as present but also
   set one of the reserved bits in the shadow pte
 - tell the vmx hardware not to trap faults which have the present bit clear

With this, normal page-not-present faults go directly to the guest,
bypassing kvm entirely.

Unfortunately, this trick only works on Intel hardware, as AMD lacks a
way to discriminate among page faults based on error code.  It is also
a little risky since it uses reserved bits which might become unreserved
in the future, so a module parameter is provided to disable it.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

KVM avoids reloading the efer msr when the difference between the guest
and host values consist of the long mode bits (which are switched by
hardware) and the NX bit (which is emulated by the KVM MMU).

This patch also allows KVM to ignore SCE (syscall enable) when the guest
is running in 32-bit mode.  This is because the syscall instruction is
not available in 32-bit mode on Intel processors, so the SCE bit is
effectively meaningless.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Move emulate_ctxt to kvm_vcpu to keep emulate context when we exit from kvm
module. Call x86_decode_insn() only when needed. Modify x86_emulate_insn() to
not modify the context if it must be re-entered.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

emulate_instruction() calls now x86_decode_insn() and x86_emulate_insn().
x86_emulate_insn() is x86_emulate_memop() without the decoding part.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Split the decoding process into a new function x86_decode_insn().
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Move all x86_emulate_memop() common variables between decode and execute to a
structure decode_cache.  This will help in later separating decode and
emulate.

            struct decode_cache {
                u8 twobyte;
                u8 b;
                u8 lock_prefix;
                u8 rep_prefix;
                u8 op_bytes;
                u8 ad_bytes;
                struct operand src;
                struct operand dst;
                unsigned long *override_base;
                unsigned int d;
                unsigned long regs[NR_VCPU_REGS];
                unsigned long eip;
                /* modrm */
                u8 modrm;
                u8 modrm_mod;
                u8 modrm_reg;
                u8 modrm_rm;
                u8 use_modrm_ea;
                unsigned long modrm_ea;
                unsigned long modrm_val;
           };
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Remove #ifdef functions never used
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch refactors the current hypercall infrastructure to better
support live migration and SMP.  It eliminates the hypercall page by
trapping the UD exception that would occur if you used the wrong hypercall
instruction for the underlying architecture and replacing it with the right
one lazily.

A fall-out of this patch is that the unhandled hypercalls no longer trap to
userspace.  There is very little reason though to use a hypercall to
communicate with userspace as PIO or MMIO can be used.  There is no code
in tree that uses userspace hypercalls.

[avi: fix #ud injection on vmx]
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Add vmmcall/vmcall to x86_emulate.  Future patch will implement functionality
for these instructions.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>