For DEVICE_VERSION_V2, the hardware only supports src-ip,
dst-ip and verification-tag for rss tuple set of sctp6
packet. For DEVICE_VERSION_V3, the hardware supports
src-port and dst-port as well.

Currently, when user queries the sctp6 rss tuples info,
some unsupported information will be showed on V2. So add
a check for hardware version when initializing and queries
sctp6 rss tuple to fix this issue.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

HCLGE_MBX_MAX_ARQ_MSG_NUM is used to apply memory for the number
of queues used by ARQ(Asynchronous Receive Queue), so the head
and tail pointers should also use this macro.

Fixes: 07a0556a ("net: hns3: Changes to support ARQ(Asynchronous Receive Queue)")
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When phy driver does not implement the set_loopback interface,
phy loopback test will return -EOPNOTSUPP, and the loopback test
will fail. So when phy driver does not implement the set_loopback
interface, don't do phy loopback test.

Fixes: c9765a89 ("net: hns3: add phy selftest function")
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix calling context.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Samuel Holland says:

====================
Fixes for dwmac-sun8i suspend/resume

This series fixes issues preventing dwmac-sun8i from working after a
suspend/resume cycle. Those issues include the PHY being left powered
off, the MAC syscon configuration being reset, and the reference to the
reset controller being improperly dropped. They also fix related issues
in probe error handling and driver removal.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously, sun8i_dwmac_set_syscon was called from a chain of functions
in several different files:
    sun8i_dwmac_probe
      stmmac_dvr_probe
        stmmac_hw_init
          stmmac_hwif_init
            sun8i_dwmac_setup
              sun8i_dwmac_set_syscon
which made the lifetime of the syscon values hard to reason about. Part
of the problem is that there is no similar platform driver callback from
stmmac_dvr_remove. As a result, the driver unset the syscon value in
sun8i_dwmac_exit, but this leaves it uninitialized after a suspend/
resume cycle. It was also unset a second time (outside sun8i_dwmac_exit)
in the probe error path.

Move the init to the earliest available place in sun8i_dwmac_probe
(after stmmac_probe_config_dt, which initializes plat_dat), and the
deinit to the corresponding position in the cleanup order.

Since priv is not filled in until stmmac_dvr_probe, this requires
changing the sun8i_dwmac_set_syscon parameters to priv's two relevant
members.

Fixes: 9f93ac8d ("net-next: stmmac: Add dwmac-sun8i")
Fixes: 634db83b ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Signed-off-by: NSamuel Holland <samuel@sholland.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sun8i_dwmac_exit calls sun8i_dwmac_unpower_internal_phy, but
sun8i_dwmac_init did not call sun8i_dwmac_power_internal_phy. This
caused PHY power to remain off after a suspend/resume cycle. Fix this by
recording if PHY power should be restored, and if so, restoring it.

Fixes: 634db83b ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Signed-off-by: NSamuel Holland <samuel@sholland.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While stmmac_pltfr_remove calls sun8i_dwmac_exit, the sun8i_dwmac_init
and sun8i_dwmac_exit functions are also called by the stmmac_platform
suspend/resume callbacks. They may be called many times during the
device's lifetime and should not release resources used by the driver.

Furthermore, there was no error handling in case registering the MDIO
mux failed during probe, and the EPHY clock was never released at all.

Fix all of these issues by moving the deinitialization code to a driver
removal callback. Also ensure the EPHY is powered down before removal.

Fixes: 634db83b ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Signed-off-by: NSamuel Holland <samuel@sholland.org>
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

stmmac_pltfr_remove does three things in one function, making it
inapproprate for unwinding the steps in the probe function. Currently,
a failure before the call to stmmac_dvr_probe would leak OF node
references due to missing a call to stmmac_remove_config_dt. And an
error in stmmac_dvr_probe would cause the driver to attempt to remove a
netdevice that was never added. Fix these by reordering the init and
splitting out the error handling steps.

Fixes: 9f93ac8d ("net-next: stmmac: Add dwmac-sun8i")
Fixes: 40a1dcee ("net: ethernet: dwmac-sun8i: Use the correct function in exit path")
Signed-off-by: NSamuel Holland <samuel@sholland.org>
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

VLAN checks for NETREG_UNINITIALIZED to distinguish between
registration failure and unregistration in progress.

Since commit cb626bf5 ("net-sysfs: Fix reference count leak")
registration failure may, however, result in NETREG_UNREGISTERED
as well as NETREG_UNINITIALIZED.

This fix is similer to cebb6975 ("rtnetlink: Fix
memory(net_device) leak when ->newlink fails")

Fixes: cb626bf5 ("net-sysfs: Fix reference count leak")
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From the existing definitions it's unclear which stat to
use to report filtering based on L2 dst addr in old
broadcast-medium Ethernet.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A call to dma_alloc_coherent() is wrapped by sonic_alloc_descriptors().

This is correctly freed in the remove function, but not in the error
handling path of the probe function. Fix this by adding the missing
dma_free_coherent() call.

While at it, rename a label in order to be slightly more informative.

Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Chris Zankel <chris@zankel.net>
References: commit 10e3cc18 ("net/sonic: Fix a resource leak in an error handling path in 'jazz_sonic_probe()'")
Fixes: 74f2a5f0 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.")
Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without this, the driver runs into a link failure

arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_ds26522_probe':
slic_ds26522.c:(.text+0x100c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: slic_ds26522.c:(.text+0x1cdc): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_write':
slic_ds26522.c:(.text+0x1e4c): undefined reference to `byte_rev_table'

Fixes: c37d4a00 ("Maxim/driver: Add driver for maxim ds26522")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without this, we run into a link error

arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o: in function `dsp_audio_generate_law_tables':
(.text+0x30c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o:(.text+0x5e4): more undefined references to `byte_rev_table' follow
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without crc32 support, this fails to link:

arm-linux-gnueabi-ld: net/wireless/scan.o: in function `cfg80211_scan_6ghz':
scan.c:(.text+0x928): undefined reference to `crc32_le'

Fixes: c8cb5b85 ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without crc32, the driver fails to link:

arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify':
fw.c:(.text+0x74c): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow

Fixes: 151a9706 ("wil6210: firmware download")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without crc32, this driver fails to link:

arm-linux-gnueabi-ld: drivers/net/can/kvaser_pciefd.o: in function `kvaser_pciefd_probe':
kvaser_pciefd.c:(.text+0x2b0): undefined reference to `crc32_be'

Fixes: 26ad340e ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without crc32, this driver fails to link:

arm-linux-gnueabi-ld: drivers/net/phy/dp83640.o: in function `match':
dp83640.c:(.text+0x476c): undefined reference to `crc32_le'

Fixes: 539e44d2 ("dp83640: Include hash in timestamp/packet matching")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without this, the driver fails to link:

lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_grc_dump':
qed_debug.c:(.text+0x4068): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_idle_chk_dump':
qed_debug.c:(.text+0x51fc): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_mcp_trace_dump':
qed_debug.c:(.text+0x6000): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_dbg_reg_fifo_dump':
qed_debug.c:(.text+0x66cc): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o:qed_debug.c:(.text+0x6aa4): more undefined references to `crc32_le' follow

Fixes: 7a4b21b7 ("qed: Add nvram selftest")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull ARC updates from Vineet Gupta:
 "Things are quieter on upstreaming front as we are mostly focusing on
  ARCv3/ARC64 port.

  This contains just build system updates from Masahiro Yamada"

* tag 'arc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: build: use $(READELF) instead of hard-coded readelf
  ARC: build: remove unneeded extra-y
  ARC: build: move symlink creation to arch/arc/Makefile to avoid race
  ARC: build: add boot_targets to PHONY
  ARC: build: add uImage.lzma to the top-level target
  ARC: build: remove non-existing bootpImage from KBUILD_IMAGE

Pull networking fixes from Jakub Kicinski:
 "Networking fixes, including fixes from netfilter, wireless and bpf
  trees.

  Current release - regressions:

   - mt76: fix NULL pointer dereference in mt76u_status_worker and
     mt76s_process_tx_queue

   - net: ipa: fix interconnect enable bug

  Current release - always broken:

   - netfilter: fixes possible oops in mtype_resize in ipset

   - ath11k: fix number of coding issues found by static analysis tools
     and spurious error messages

  Previous releases - regressions:

   - e1000e: re-enable s0ix power saving flows for systems with the
     Intel i219-LM Ethernet controllers to fix power use regression

   - virtio_net: fix recursive call to cpus_read_lock() to avoid a
     deadlock

   - ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()

   - sysfs: take the rtnl lock around XPS configuration

   - xsk: fix memory leak for failed bind and rollback reservation at
     NETDEV_TX_BUSY

   - r8169: work around power-saving bug on some chip versions

  Previous releases - always broken:

   - dcb: validate netlink message in DCB handler

   - tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
     to prevent unnecessary retries

   - vhost_net: fix ubuf refcount when sendmsg fails

   - bpf: save correct stopping point in file seq iteration

   - ncsi: use real net-device for response handler

   - neighbor: fix div by zero caused by a data race (TOCTOU)

   - bareudp: fix use of incorrect min_headroom size and a false
     positive lockdep splat from the TX lock

   - mvpp2:
      - clear force link UP during port init procedure in case
        bootloader had set it
      - add TCAM entry to drop flow control pause frames
      - fix PPPoE with ipv6 packet parsing
      - fix GoP Networking Complex Control config of port 3
      - fix pkt coalescing IRQ-threshold configuration

   - xsk: fix race in SKB mode transmit with shared cq

   - ionic: account for vlan tag len in rx buffer len

   - stmmac: ignore the second clock input, current clock framework does
     not handle exclusive clock use well, other drivers may reconfigure
     the second clock

  Misc:

   - ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
     existing scheme"

* tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
  net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
  net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
  net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
  r8169: work around power-saving bug on some chip versions
  net: usb: qmi_wwan: add Quectel EM160R-GL
  selftests: mlxsw: Set headroom size of correct port
  net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
  ibmvnic: fix: NULL pointer dereference.
  docs: networking: packet_mmap: fix old config reference
  docs: networking: packet_mmap: fix formatting for C macros
  vhost_net: fix ubuf refcount incorrectly when sendmsg fails
  bareudp: Fix use of incorrect min_headroom size
  bareudp: set NETIF_F_LLTX flag
  net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
  atlantic: remove architecture depends
  erspan: fix version 1 check in gre_parse_header()
  net: hns: fix return value check in __lb_other_process()
  net: sched: prevent invalid Scell_log shift count
  net: neighbor: fix a crash caused by mod zero
  ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
  ...

Pull AFS fixes from David Howells:
 "Two fixes.

  The first is the fix for the strnlen() array limit check and the
  second fixes the calculation of the number of dirent records used to
  represent any particular filename length"

* tag 'afs-fixes-04012021' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix directory entry size calculation
  afs: Work around strnlen() oops with CONFIG_FORTIFIED_SOURCE=y

Ever since commit 2a9127fc ("mm: rewrite wait_on_page_bit_common()
logic") we've had some very occasional reports of BUG_ON(PageWriteback)
in write_cache_pages(), which we thought we already fixed in commit
073861ed ("mm: fix VM_BUG_ON(PageTail) and BUG_ON(PageWriteback)").

But syzbot just reported another one, even with that commit in place.

And it turns out that there's a simpler way to trigger the BUG_ON() than
the one Hugh found with page re-use.  It all boils down to the fact that
the page writeback is ostensibly serialized by the page lock, but that
isn't actually really true.

Yes, the people _setting_ writeback all do so under the page lock, but
the actual clearing of the bit - and waking up any waiters - happens
without any page lock.

This gives us this fairly simple race condition:

  CPU1 = end previous writeback
  CPU2 = start new writeback under page lock
  CPU3 = write_cache_pages()

  CPU1          CPU2            CPU3
  ----          ----            ----

  end_page_writeback()
    test_clear_page_writeback(page)
    ... delayed...

                lock_page();
                set_page_writeback()
                unlock_page()

                                lock_page()
                                wait_on_page_writeback();

    wake_up_page(page, PG_writeback);
    .. wakes up CPU3 ..

                                BUG_ON(PageWriteback(page));

where the BUG_ON() happens because we woke up the PG_writeback bit
becasue of the _previous_ writeback, but a new one had already been
started because the clearing of the bit wasn't actually atomic wrt the
actual wakeup or serialized by the page lock.

The reason this didn't use to happen was that the old logic in waiting
on a page bit would just loop if it ever saw the bit set again.

The nice proper fix would probably be to get rid of the whole "wait for
writeback to clear, and then set it" logic in the writeback path, and
replace it with an atomic "wait-to-set" (ie the same as we have for page
locking: we set the page lock bit with a single "lock_page()", not with
"wait for lock bit to clear and then set it").

However, out current model for writeback is that the waiting for the
writeback bit is done by the generic VFS code (ie write_cache_pages()),
but the actual setting of the writeback bit is done much later by the
filesystem ".writepages()" function.

IOW, to make the writeback bit have that same kind of "wait-to-set"
behavior as we have for page locking, we'd have to change our roughly
~50 different writeback functions.  Painful.

Instead, just make "wait_on_page_writeback()" loop on the very unlikely
situation that the PG_writeback bit is still set, basically re-instating
the old behavior.  This is very non-optimal in case of contention, but
since we only ever set the bit under the page lock, that situation is
controlled.

Reported-by: syzbot+2fc0712f8f8b8b8fa0ef@syzkaller.appspotmail.com
Fixes: 2a9127fc ("mm: rewrite wait_on_page_bit_common() logic")
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Missing sanitization of rateest userspace string, bug has been
   triggered by syzbot, patch from Florian Westphal.

2) Report EOPNOTSUPP on missing set features in nft_dynset, otherwise
   error reporting to userspace via EINVAL is misleading since this is
   reserved for malformed netlink requests.

3) New binaries with old kernels might silently accept several set
   element expressions. New binaries set on the NFT_SET_EXPR and
   NFT_DYNSET_F_EXPR flags to request for several expressions per
   element, hence old kernels which do not support for this bail out
   with EOPNOTSUPP.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: nftables: add set expression flags
  netfilter: nft_dynset: report EOPNOTSUPP on missing set feature
  netfilter: xt_RATEEST: reject non-null terminated string from userspace
====================

Link: https://lore.kernel.org/r/20210103192920.18639-1-pablo@netfilter.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Martin Blumenstingl says:

====================
net: dsa: lantiq_gswip: two fixes for -net/-stable

While testing the lantiq_gswip driver in OpenWrt at least one board had
a non-working Ethernet port connected to an internal 100Mbit/s PHY22F
GPHY. The problem which could be observed:
- the PHY would detect the link just fine
- ethtool stats would see the TX counter rise
- the RX counter in ethtool was stuck at zero

It turns out that two independent patches are needed to fix this:
- first we need to enable the MII data lines also for internal PHYs
- second we need to program the GSWIP_MII_CFG registers for all ports
  except the CPU port

These two patches have also been tested by back-porting them on top of
Linux 5.4.86 in OpenWrt.

Special thanks to Hauke for debugging and brainstorming this on IRC
with me!
====================

Link: https://lore.kernel.org/r/20210103012544.3259029-1-martin.blumenstingl@googlemail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

There is one GSWIP_MII_CFG register for each switch-port except the CPU
port. The register offset for the first port is 0x0, 0x02 for the
second, 0x04 for the third and so on.

Update the driver to not only restrict the GSWIP_MII_CFG registers to
ports 0, 1 and 5. Handle ports 0..5 instead but skip the CPU port. This
means we are not overwriting the configuration for the third port (port
two since we start counting from zero) with the settings for the sixth
port (with number five) anymore.

The GSWIP_MII_PCDU(p) registers are not updated because there's really
only three (one for each of the following ports: 0, 1, 5).

Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: NHauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Enable GSWIP_MII_CFG_EN also for internal PHYs to make traffic flow.
Without this the PHY link is detected properly and ethtool statistics
for TX are increasing but there's no RX traffic coming in.

Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Suggested-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: NHauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

In lapb_device_event, lapb_devtostruct is called to get a reference to
an object of "struct lapb_cb". lapb_devtostruct increases the refcount
of the object and returns a pointer to it. However, we didn't decrease
the refcount after we finished using the pointer. This patch fixes this
problem.

Fixes: a4989fa9 ("net/lapb: support netdev events")
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: NXie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201231174331.64539-1-xie.he.0141@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

A user reported failing network with RTL8168dp (a quite rare chip
version). Realtek confirmed that few chip versions suffer from a PLL
power-down hw bug.

Fixes: 07df5bd8 ("r8169: power down chip in probe")
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/a1c39460-d533-7f9e-fa9d-2b8990b02426@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

New modem using ff/ff/30 for QCDM, ff/00/00 for  AT and NMEA,
and ff/ff/ff for RMNET/QMI.

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=2c7c ProdID=0620 Rev= 4.09
S: Manufacturer=Quectel
S: Product=EM160R-GL
S: SerialNumber=e31cedc1
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20201230152451.245271-1-bjorn@mork.noSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The test was setting the headroom size of the wrong port. This was not
visible because of a firmware bug that canceled this bug.

Set the headroom size of the correct port, so that the test will pass
with both old and new firmware versions.

Fixes: bfa80478 ("selftests: mlxsw: Add a PFC test")
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Reviewed-by: NPetr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20201230114251.394009-1-idosch@idosch.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

A new flag MACB_CAPS_CLK_HW_CHG was added and all callers of
macb_set_tx_clk were gated on the presence of this flag.

-   if (!clk)
+ if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))

However the flag was not added to anything other than the new
sama7g5_gem, turning that function call into a no op for all other
systems. This breaks the networking on Zynq.

The commit message adding this states: a new capability so that
macb_set_tx_clock() to not be called for IPs having this
capability

This strongly implies that present of the flag was intended to skip
the function not absence of the flag. Update the if statement to
this effect, which repairs the existing users.

Fixes: daafa1d3 ("net: macb: add capability to not set the clock rate")
Suggested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210104103802.13091-1-ckeepax@opensource.cirrus.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The error is due to dereference a null pointer in function
reset_one_sub_crq_queue():

if (!scrq) {
    netdev_dbg(adapter->netdev,
               "Invalid scrq reset. irq (%d) or msgs(%p).\n",
		scrq->irq, scrq->msgs);
		return -EINVAL;
}

If the expression is true, scrq must be a null pointer and cannot
dereference.

Fixes: 9281cf2d ("ibmvnic: avoid memset null scrq msgs")
Signed-off-by: NYANG LI <abaci-bugfix@linux.alibaba.com>
Reported-by: NAbaci <abaci@linux.alibaba.com>
Acked-by: NLijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/1609312994-121032-1-git-send-email-abaci-bugfix@linux.alibaba.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Before commit 889b8f96 ("packet: Kill CONFIG_PACKET_MMAP.") there
used to be a CONFIG_PACKET_MMAP config symbol that depended on
CONFIG_PACKET. The text still implies that PACKET_MMAP can be disabled.
Remove that from the text, as well as reference to old kernel versions.

Also, drop reference to broken link to information for pre 2.6.5
kernels.

Make a slight working improvement (s/In/On/) while at it.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/80089f3783372c8fd7833f28ce774a171b2ef252.1609232919.git.baruch@tkos.co.ilSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The citation of macro definitions should appear in a code block.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/5cb47005e7a59b64299e038827e295822193384c.1609232919.git.baruch@tkos.co.ilSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Currently the vhost_zerocopy_callback() maybe be called to decrease
the refcount when sendmsg fails in tun. The error handling in vhost
handle_tx_zerocopy() will try to decrease the same refcount again.
This is wrong. To fix this issue, we only call vhost_net_ubuf_put()
when vq->heads[nvq->desc].len == VHOST_DMA_IN_PROGRESS.

Fixes: bab632d6 ("vhost: vhost TX zero-copy support")
Signed-off-by: NYunjian Wang <wangyunjian@huawei.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/1609207308-20544-1-git-send-email-wangyunjian@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

In the bareudp6_xmit_skb(), it calculates min_headroom.
At that point, it uses struct iphdr, but it's not correct.
So panic could occur.
The struct ipv6hdr should be used.

Test commands:
    ip netns add A
    ip netns add B
    ip link add veth0 netns A type veth peer name veth1 netns B
    ip netns exec A ip link set veth0 up
    ip netns exec A ip a a 2001:db8:0::1/64 dev veth0
    ip netns exec B ip link set veth1 up
    ip netns exec B ip a a 2001:db8:0::2/64 dev veth1

    for i in {10..1}
    do
            let A=$i-1
            ip netns exec A ip link add bareudp$i type bareudp dstport $i \
		    ethertype 0x86dd
            ip netns exec A ip link set bareudp$i up
            ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev bareudp$i
            ip netns exec A ip -6 r a 2001:db8:$i::2 encap ip6 src \
		    2001:db8:$A::1 dst 2001:db8:$A::2 via 2001:db8:$i::2 \
		    dev bareudp$i

            ip netns exec B ip link add bareudp$i type bareudp dstport $i \
		    ethertype 0x86dd
            ip netns exec B ip link set bareudp$i up
            ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev bareudp$i
            ip netns exec B ip -6 r a 2001:db8:$i::1 encap ip6 src \
		    2001:db8:$A::2 dst 2001:db8:$A::1 via 2001:db8:$i::1 \
		    dev bareudp$i
    done
    ip netns exec A ping 2001:db8:7::2

Splat looks like:
[   66.436679][    C2] skbuff: skb_under_panic: text:ffffffff928614c8 len:454 put:14 head:ffff88810abb4000 data:ffff88810abb3ffa tail:0x1c0 end:0x3ec0 dev:veth0
[   66.441626][    C2] ------------[ cut here ]------------
[   66.443458][    C2] kernel BUG at net/core/skbuff.c:109!
[   66.445313][    C2] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[   66.447606][    C2] CPU: 2 PID: 913 Comm: ping Not tainted 5.10.0+ #819
[   66.450251][    C2] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[   66.453713][    C2] RIP: 0010:skb_panic+0x15d/0x15f
[   66.455345][    C2] Code: 98 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 60 8b 78 93 41 57 41 56 41 55 48 8b 54 24 20 48 8b 74 24 28 e8 b5 40 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 08 c9 98 fe 8b 34 24 48 c7 c1 80
[   66.462314][    C2] RSP: 0018:ffff888119209648 EFLAGS: 00010286
[   66.464281][    C2] RAX: 0000000000000089 RBX: ffff888003159000 RCX: 0000000000000000
[   66.467216][    C2] RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed10232412c0
[   66.469768][    C2] RBP: ffff88810a53d440 R08: ffffed102328018d R09: ffffed102328018d
[   66.472297][    C2] R10: ffff888119400c67 R11: ffffed102328018c R12: 000000000000000e
[   66.474833][    C2] R13: ffff88810abb3ffa R14: 00000000000001c0 R15: 0000000000003ec0
[   66.477361][    C2] FS:  00007f37c0c72f00(0000) GS:ffff888119200000(0000) knlGS:0000000000000000
[   66.480214][    C2] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   66.482296][    C2] CR2: 000055a058808570 CR3: 000000011039e002 CR4: 00000000003706e0
[   66.484811][    C2] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   66.487793][    C2] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   66.490424][    C2] Call Trace:
[   66.491469][    C2]  <IRQ>
[   66.492374][    C2]  ? eth_header+0x28/0x190
[   66.494054][    C2]  ? eth_header+0x28/0x190
[   66.495401][    C2]  skb_push.cold.99+0x22/0x22
[   66.496700][    C2]  eth_header+0x28/0x190
[   66.497867][    C2]  neigh_resolve_output+0x3de/0x720
[   66.499615][    C2]  ? __neigh_update+0x7e8/0x20a0
[   66.501176][    C2]  __neigh_update+0x8bd/0x20a0
[   66.502749][    C2]  ndisc_update+0x34/0xc0
[   66.504010][    C2]  ndisc_recv_na+0x8da/0xb80
[   66.505041][    C2]  ? pndisc_redo+0x20/0x20
[   66.505888][    C2]  ? rcu_read_lock_sched_held+0xc0/0xc0
[   66.506965][    C2]  ndisc_rcv+0x3a0/0x470
[   66.507797][    C2]  icmpv6_rcv+0xad9/0x1b00
[   66.508645][    C2]  ip6_protocol_deliver_rcu+0xcd6/0x1560
[   66.509719][    C2]  ip6_input_finish+0x5b/0xf0
[   66.510615][    C2]  ip6_input+0xcd/0x2d0
[   66.511406][    C2]  ? ip6_input_finish+0xf0/0xf0
[   66.512327][    C2]  ? rcu_read_lock_held+0x91/0xa0
[   66.513279][    C2]  ? ip6_protocol_deliver_rcu+0x1560/0x1560
[   66.514414][    C2]  ipv6_rcv+0xe8/0x300
[ ... ]
Acked-by: NGuillaume Nault <gnault@redhat.com>
Fixes: 571912c6 ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20201228152146.24270-1-ap420073@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Like other tunneling interfaces, the bareudp doesn't need TXLOCK.
So, It is good to set the NETIF_F_LLTX flag to improve performance and
to avoid lockdep's false-positive warning.

Test commands:
    ip netns add A
    ip netns add B
    ip link add veth0 netns A type veth peer name veth1 netns B
    ip netns exec A ip link set veth0 up
    ip netns exec A ip a a 10.0.0.1/24 dev veth0
    ip netns exec B ip link set veth1 up
    ip netns exec B ip a a 10.0.0.2/24 dev veth1

    for i in {2..1}
    do
            let A=$i-1
            ip netns exec A ip link add bareudp$i type bareudp \
		    dstport $i ethertype ip
            ip netns exec A ip link set bareudp$i up
            ip netns exec A ip a a 10.0.$i.1/24 dev bareudp$i
            ip netns exec A ip r a 10.0.$i.2 encap ip src 10.0.$A.1 \
		    dst 10.0.$A.2 via 10.0.$i.2 dev bareudp$i

            ip netns exec B ip link add bareudp$i type bareudp \
		    dstport $i ethertype ip
            ip netns exec B ip link set bareudp$i up
            ip netns exec B ip a a 10.0.$i.2/24 dev bareudp$i
            ip netns exec B ip r a 10.0.$i.1 encap ip src 10.0.$A.2 \
		    dst 10.0.$A.1 via 10.0.$i.1 dev bareudp$i
    done
    ip netns exec A ping 10.0.2.2

Splat looks like:
[   96.992803][  T822] ============================================
[   96.993954][  T822] WARNING: possible recursive locking detected
[   96.995102][  T822] 5.10.0+ #819 Not tainted
[   96.995927][  T822] --------------------------------------------
[   96.997091][  T822] ping/822 is trying to acquire lock:
[   96.998083][  T822] ffff88810f753898 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960
[   96.999813][  T822]
[   96.999813][  T822] but task is already holding lock:
[   97.001192][  T822] ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960
[   97.002908][  T822]
[   97.002908][  T822] other info that might help us debug this:
[   97.004401][  T822]  Possible unsafe locking scenario:
[   97.004401][  T822]
[   97.005784][  T822]        CPU0
[   97.006407][  T822]        ----
[   97.007010][  T822]   lock(_xmit_NONE#2);
[   97.007779][  T822]   lock(_xmit_NONE#2);
[   97.008550][  T822]
[   97.008550][  T822]  *** DEADLOCK ***
[   97.008550][  T822]
[   97.010057][  T822]  May be due to missing lock nesting notation
[   97.010057][  T822]
[   97.011594][  T822] 7 locks held by ping/822:
[   97.012426][  T822]  #0: ffff888109a144f0 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x12f7/0x2b00
[   97.014191][  T822]  #1: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020
[   97.016045][  T822]  #2: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960
[   97.017897][  T822]  #3: ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960
[   97.019684][  T822]  #4: ffffffffbce2f600 (rcu_read_lock){....}-{1:2}, at: bareudp_xmit+0x31b/0x3690 [bareudp]
[   97.021573][  T822]  #5: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020
[   97.023424][  T822]  #6: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960
[   97.025259][  T822]
[   97.025259][  T822] stack backtrace:
[   97.026349][  T822] CPU: 3 PID: 822 Comm: ping Not tainted 5.10.0+ #819
[   97.027609][  T822] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[   97.029407][  T822] Call Trace:
[   97.030015][  T822]  dump_stack+0x99/0xcb
[   97.030783][  T822]  __lock_acquire.cold.77+0x149/0x3a9
[   97.031773][  T822]  ? stack_trace_save+0x81/0xa0
[   97.032661][  T822]  ? register_lock_class+0x1910/0x1910
[   97.033673][  T822]  ? register_lock_class+0x1910/0x1910
[   97.034679][  T822]  ? rcu_read_lock_sched_held+0x91/0xc0
[   97.035697][  T822]  ? rcu_read_lock_bh_held+0xa0/0xa0
[   97.036690][  T822]  lock_acquire+0x1b2/0x730
[   97.037515][  T822]  ? __dev_queue_xmit+0x1f52/0x2960
[   97.038466][  T822]  ? check_flags+0x50/0x50
[   97.039277][  T822]  ? netif_skb_features+0x296/0x9c0
[   97.040226][  T822]  ? validate_xmit_skb+0x29/0xb10
[   97.041151][  T822]  _raw_spin_lock+0x30/0x70
[   97.041977][  T822]  ? __dev_queue_xmit+0x1f52/0x2960
[   97.042927][  T822]  __dev_queue_xmit+0x1f52/0x2960
[   97.043852][  T822]  ? netdev_core_pick_tx+0x290/0x290
[   97.044824][  T822]  ? mark_held_locks+0xb7/0x120
[   97.045712][  T822]  ? lockdep_hardirqs_on_prepare+0x12c/0x3e0
[   97.046824][  T822]  ? __local_bh_enable_ip+0xa5/0xf0
[   97.047771][  T822]  ? ___neigh_create+0x12a8/0x1eb0
[   97.048710][  T822]  ? trace_hardirqs_on+0x41/0x120
[   97.049626][  T822]  ? ___neigh_create+0x12a8/0x1eb0
[   97.050556][  T822]  ? __local_bh_enable_ip+0xa5/0xf0
[   97.051509][  T822]  ? ___neigh_create+0x12a8/0x1eb0
[   97.052443][  T822]  ? check_chain_key+0x244/0x5f0
[   97.053352][  T822]  ? rcu_read_lock_bh_held+0x56/0xa0
[   97.054317][  T822]  ? ip_finish_output2+0x6ea/0x2020
[   97.055263][  T822]  ? pneigh_lookup+0x410/0x410
[   97.056135][  T822]  ip_finish_output2+0x6ea/0x2020
[ ... ]
Acked-by: NGuillaume Nault <gnault@redhat.com>
Fixes: 571912c6 ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20201228152136.24215-1-ap420073@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Pull RCU fix from Paul McKenney:
 "This is a fix for a regression in the v5.10 merge window, but it was
  reported quite late in the v5.10 process, plus generating and testing
  the fix took some time.

  The regression is due to commit 36dadef2 ("kprobes: Init kprobes
  in early_initcall") which on powerpc can use RCU Tasks before
  initialization, resulting in boot failures.

  The fix is straightforward, simply moving initialization of RCU Tasks
  before the early_initcall()s. The fix has been exposed to -next and
  kbuild test robot testing, and has been tested by the PowerPC guys"

* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  rcu-tasks: Move RCU-tasks initialization to before early_initcall()

Pull ENABLE_MUST_CHECK removal from Miguel Ojeda:
 "Remove CONFIG_ENABLE_MUST_CHECK (Masahiro Yamada)"

Note that this removes the config option by making the must-check
unconditional, not by removing must check itself.

* tag 'compiler-attributes-for-linus-v5.11' of git://github.com/ojeda/linux:
  Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK