- 26 4月, 2007 12 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
For the cases where the transport header is being set to a offset from skb->data. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the common, open coded 'skb->h.raw = skb->data' operation, so that we can later turn skb->h.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple cases: skb->h.raw = skb->data; skb->h.raw = {skb_push|[__]skb_pull}() The next ones will handle the slightly more "complex" cases. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the cases where the network header is being set to a offset from skb->data. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the quite common 'skb->nh.raw - skb->data' sequence. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Some more cases where skb->nh.iph was being set that were converted to using skb_reset_network_header. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
skb_push updates and returns skb->data, so we can just call skb_reset_network_header after the call to skb_push. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the common, open coded 'skb->mac.raw = skb->data' operation, so that we can later turn skb->mac.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Add whitespace around keywords. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 2月, 2007 1 次提交
-
-
由 Tim Schmielau 提交于
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 2月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 1月, 2007 1 次提交
-
-
由 David S. Miller 提交于
Revert 93173112 We can't elide the skb_set_owner_w() here because things like certain netfilter targets (such as owner MATCH) need a socket to be set on the SKB for correct operation. Thanks to Jan Engelhardt and other netfilter list members for pointing this out. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 12月, 2006 1 次提交
-
-
由 Stephen Hemminger 提交于
The hard header cache is in the main output path, so using seqlock instead of reader/writer lock should reduce overhead. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 12月, 2006 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 03 12月, 2006 6 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The data itself is already charged to the SKB, doing the skb_set_owner_w() just generates a lot of noise and extra atomics we don't really need. Lmbench improvements on lat_tcp are minimal: before: TCP latency using localhost: 23.2701 microseconds TCP latency using localhost: 23.1994 microseconds TCP latency using localhost: 23.2257 microseconds after: TCP latency using localhost: 22.8380 microseconds TCP latency using localhost: 22.9465 microseconds TCP latency using localhost: 22.8462 microseconds Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
nfmark is being used in various subsystems and has become the defacto mark field for all kinds of packets. Therefore it makes sense to rename it to `mark' and remove the dependency on CONFIG_NETFILTER. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 9月, 2006 2 次提交
-
-
由 Al Viro 提交于
->faddr is net-endian; annotated as such, variables inferred to be net-endian annotated. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
saddr and daddr are net-endian Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2006 4 次提交
-
-
由 Stephen Hemminger 提交于
Do some simple optimization on the nf_bridge_pad() function and don't use magic constants. Eliminate a double call and the #ifdef'd code for CONFIG_BRIDGE_NETFILTER. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brian Haley 提交于
Change net/core, ipv4 and ipv6 sysctl variables to __read_mostly. Couldn't actually measure any performance increase while testing (.3% I consider noise), but seems like the right thing to do. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Replace CHECKSUM_HW by CHECKSUM_PARTIAL (for outgoing packets, whose checksum still needs to be completed) and CHECKSUM_COMPLETE (for incoming packets, device supplied full checksum). Patch originally from Herbert Xu, updated by myself for 2.6.18-rc3. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Venkat Yekkirala 提交于
This labels the flows that could utilize IPSec xfrms at the points the flows are defined so that IPSec policy and SAs at the right label can be used. The following protos are currently not handled, but they should continue to be able to use single-labeled IPSec like they currently do. ipmr ip_gre ipip igmp sit sctp ip6_tunnel (IPv6 over IPv6 tunnel device) decnet Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 9月, 2006 1 次提交
-
-
由 Wei Dong 提交于
When I tested Linux kernel 2.6.17.7 about statistics "ipFragFails",found that this counter couldn't increase correctly. The criteria is RFC2011: RFC2011 ipFragFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set." ::= { ip 18 } When I send big IP packet to a router with DF bit set to 1 which need to be fragmented, and router just sends an ICMP error message ICMP_FRAG_NEEDED but no increments for this counter(in the function ip_fragment). Signed-off-by: NWei Dong <weid@nanjing-fnst.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 8月, 2006 1 次提交
-
-
由 Herbert Xu 提交于
The IPv4/IPv6 datagram output path was using skb_trim to trim paged packets because they know that the packet has not been cloned yet (since the packet hasn't been given to anything else in the system). This broke because skb_trim no longer allows paged packets to be trimmed. Paged packets must be given to one of the pskb_trim functions instead. This patch adds a new pskb_trim_unique function to cover the IPv4/IPv6 datagram output path scenario and replaces the corresponding skb_trim calls with it. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 8月, 2006 1 次提交
-
-
由 Wei Dong 提交于
When I tested linux kernel 2.6.71.7 about statistics "ipv6IfStatsOutFragCreates", and found that it couldn't increase correctly. The criteria is RFC 2465: ipv6IfStatsOutFragCreates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of output datagram fragments that have been generated as a result of fragmentation at this output interface." ::= { ipv6IfStatsEntry 15 } I think there are two issues in Linux kernel. 1st: RFC2465 specifies the counter is "The number of output datagram fragments...". I think increasing this counter after output a fragment successfully is better. And it should not be increased even though a fragment is created but failed to output. 2nd: If we send a big ICMP/ICMPv6 echo request to a host, and receive ICMP/ICMPv6 echo reply consisted of some fragments. As we know that in Linux kernel first fragmentation occurs in ICMP layer(maybe saying transport layer is better), but this is not the "real" fragmentation,just do some "pre-fragment" -- allocate space for date, and form a frag_list, etc. The "real" fragmentation happens in IP layer -- set offset and MF flag and so on. So I think in "fast path" for ip_fragment/ip6_fragment, if we send a fragment which "pre-fragment" by upper layer we should also increase "ipv6IfStatsOutFragCreates". Signed-off-by: NWei Dong <weid@nanjing-fnst.com> Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 7月, 2006 1 次提交
-
-
由 Herbert Xu 提交于
This patch adds the wrapper function skb_is_gso which can be used instead of directly testing skb_shinfo(skb)->gso_size. This makes things a little nicer and allows us to change the primary key for indicating whether an skb is GSO (if we ever want to do that). Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 7月, 2006 2 次提交
-
-
由 Herbert Xu 提交于
This patch adds GSO support for IPv6 and TCPv6. This is based on a patch by Ananda Raju <Ananda.Raju@neterion.com>. His original description is: This patch enables TSO over IPv6. Currently Linux network stacks restricts TSO over IPv6 by clearing of the NETIF_F_TSO bit from "dev->features". This patch will remove this restriction. This patch will introduce a new flag NETIF_F_TSO6 which will be used to check whether device supports TSO over IPv6. If device support TSO over IPv6 then we don't clear of NETIF_F_TSO and which will make the TCP layer to create TSO packets. Any device supporting TSO over IPv6 will set NETIF_F_TSO6 flag in "dev->features" along with NETIF_F_TSO. In case when user disables TSO using ethtool, NETIF_F_TSO will get cleared from "dev->features". So even if we have NETIF_F_TSO6 we don't get TSO packets created by TCP layer. SKB_GSO_TCPV4 renamed to SKB_GSO_TCP to make it generic GSO packet. SKB_GSO_UDPV4 renamed to SKB_GSO_UDP as UFO is not a IPv4 feature. UFO is supported over IPv6 also The following table shows there is significant improvement in throughput with normal frames and CPU usage for both normal and jumbo. -------------------------------------------------- | | 1500 | 9600 | | ------------------|-------------------| | | thru CPU | thru CPU | -------------------------------------------------- | TSO OFF | 2.00 5.5% id | 5.66 20.0% id | -------------------------------------------------- | TSO ON | 2.63 78.0 id | 5.67 39.0% id | -------------------------------------------------- Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 23 6月, 2006 1 次提交
-
-
由 Herbert Xu 提交于
Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not going to scale if we add any more segmentation methods (e.g., DCCP). So let's merge them. They were used to tell the protocol of a packet. This function has been subsumed by the new gso_type field. This is essentially a set of netdev feature bits (shifted by 16 bits) that are required to process a specific skb. As such it's easy to tell whether a given device can process a GSO skb: you just have to and the gso_type field and the netdev's features field. I've made gso_type a conjunction. The idea is that you have a base type (e.g., SKB_GSO_TCPV4) that can be modified further to support new features. For example, if we add a hardware TSO type that supports ECN, they would declare NETIF_F_TSO | NETIF_F_TSO_ECN. All TSO packets with CWR set would have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO packets would be SKB_GSO_TCPV4. This means that only the CWR packets need to be emulated in software. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 6月, 2006 2 次提交
-
-
由 Herbert Xu 提交于
The current stack treats NETIF_F_HW_CSUM and NETIF_F_NO_CSUM identically so we test for them in quite a few places. For the sake of brevity, I'm adding the macro NETIF_F_GEN_CSUM for these two. We also test the disjunct of NETIF_F_IP_CSUM and the other two in various places, for that purpose I've added NETIF_F_ALL_CSUM. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 James Morris 提交于
Add a secmark field to the skbuff structure, to allow security subsystems to place security markings on network packets. This is similar to the nfmark field, except is intended for implementing security policy, rather than than networking policy. This patch was already acked in principle by Dave Miller. Signed-off-by: NJames Morris <jmorris@namei.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 4月, 2006 1 次提交
-
-
由 Zach Brown 提交于
During other work I noticed that ip_append_data() seemed to be forgetting to include the frag gap in its calculation of a fragment that consumes the rest of the payload. Herbert confirmed that this was a bug that snuck in during a previous rework. Signed-off-by: NZach Brown <zach.brown@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 4月, 2006 1 次提交
-
-
由 Patrick McHardy 提交于
The conntrack code doesn't do re-fragmentation of defragmented packets anymore but relies on fragmentation in the IP layer. Purely bridged packets don't pass through the IP layer, so the bridge netfilter code needs to take care of fragmentation itself. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-