According to the IB specification, the destination qpn is allowed to be
filled into the qpc only when the qp transitions from Init to RTR, so this
code is unused.

Link: https://lore.kernel.org/r/1629985056-57004-4-git-send-email-liangwenpeng@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The bit width of dqpn is 24 bits, using u8 will cause truncation error.

Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1629985056-57004-2-git-send-email-liangwenpeng@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

dip_idx and dgid should be a one-to-one mapping relationship, but when
qp_num loops back to the start number, it may happen that two different
dgid are assiociated to the same dip_idx incorrectly.

One solution is to store the qp_num that is not assigned to dip_idx in an
array. When a dip_idx needs to be allocated to a new dgid, an spare qp_num
is extracted and assigned to dip_idx.

Fixes: f91696f2 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1629884592-23424-4-git-send-email-liangwenpeng@huawei.comSigned-off-by: NJunxian Huang <huangjunxian4@hisilicon.com>
Signed-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

When the dgid-dip_idx mapping relationship exists, dip should be assigned.

Fixes: f91696f2 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1629884592-23424-3-git-send-email-liangwenpeng@huawei.comSigned-off-by: NJunxian Huang <huangjunxian4@hisilicon.com>
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

In RNR NAK screnario, according to the specification, when no credit is
available, only the first fragment of the send request can be sent. The
LSN(Limit Sequence Number) field should be 0 or the entire packet will be
resent.

Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1629883169-2306-1-git-send-email-liangwenpeng@huawei.comSigned-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The ownerbit mode is for external card mode. Make it controlled by the
firmware.

Fixes: aba457ca ("RDMA/hns: Support owner mode doorbell")
Link: https://lore.kernel.org/r/1629539607-33217-4-git-send-email-liangwenpeng@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The stash feature is enabled by default on HIP09.

Fixes: f93c39bc ("RDMA/hns: Add support for QP stash")
Fixes: bfefae9f ("RDMA/hns: Add support for CQ stash")
Link: https://lore.kernel.org/r/1629539607-33217-3-git-send-email-liangwenpeng@huawei.comSigned-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

CMDQ support un-interrupt mode only, and firmware ignores this mode flag,
so remove it.

Fixes: a04ff739 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1629539607-33217-2-git-send-email-liangwenpeng@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The window selection field is necessary for congestion control of HIP09,
it is got from firmware and then filled into QPC. Some algorithms need it
to decide whether to limit the number of windows.

Fixes: f91696f2 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1624364163-44185-1-git-send-email-liweihang@huawei.comSigned-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The QPC_RQ/SQ_VLAN_EN bit in QPC should be enabled, not the QPC mask.

Fixes: f0cb411a ("RDMA/hns: Use new interface to modify QP context")
Link: https://lore.kernel.org/r/1624438201-11915-1-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

ULP can get more error information of CQ through verbs instead of prints.

Link: https://lore.kernel.org/r/1624362836-11631-1-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The QP type has been checked in check_send_valid(), if it's not RC, it
will process the UD/GSI branch.

Link: https://lore.kernel.org/r/1624011020-16992-10-git-send-email-liweihang@huawei.comSigned-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The process of flushing CQE can be encapsultated into a function, which
can reduce duplicate code.

Link: https://lore.kernel.org/r/1624011020-16992-9-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

When query_qp is called by userspace, max_send_wr and max_send_sge are set
to 0 by the kernel driver. However, the userspace does not use these two
return values from the kernel driver, but uses its own calculated values.
So there is no need for special treatment.

Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1624011020-16992-6-git-send-email-liweihang@huawei.comSigned-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Some kernel ULPs need to use the return value of qp_init_attr, so add
member assignments for qp_init_attr.

Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1624011020-16992-5-git-send-email-liweihang@huawei.comSigned-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

When a non-inline WR reuses a WQE that was used for inline last time, the
remaining inline flag should be cleared.

Fixes: 62490fd5 ("RDMA/hns: Avoid unnecessary memset on WQEs in post_send")
Link: https://lore.kernel.org/r/1624011020-16992-2-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Remove unused members in srq context structure.

Link: https://lore.kernel.org/r/1624262443-24528-10-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Use hr_write_reg() instead of roce_set_field().

Link: https://lore.kernel.org/r/1624262443-24528-9-git-send-email-liweihang@huawei.comSigned-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Use "hr_reg_write" to replace "roce_set_filed".

Link: https://lore.kernel.org/r/1624262443-24528-8-git-send-email-liweihang@huawei.comSigned-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

WQE_INDEX and OPCODE and QPN of CQE use redundant masks. Just remove them.

Link: https://lore.kernel.org/r/1624262443-24528-7-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Fill all QPC fileds with hr_reg_*() instead of roce_set_*(). SQPN is used
for HIP08 ES only, it should be removed.

Link: https://lore.kernel.org/r/1624262443-24528-6-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Use hr_reg_*() to write CQ context, it's simpler than roce_set_*().

Link: https://lore.kernel.org/r/1624262443-24528-5-git-send-email-liweihang@huawei.comSigned-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

In order to avoid to do bitwise operations on a boolean value, add a new
register interface to avoid sparse comlaint about "dubious: x & !y" when
calling hr_reg_write(ctx, field, !!val).

Fixes: dc504774 ("RDMA/hns: Use new interface to set MPT related fields")
Fixes: 495c2480 ("RDMA/hns: Add XRC subtype in QPC and XRC type in SRQC")
Link: https://lore.kernel.org/r/1624262443-24528-4-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

GCC may reports an running time assert error when a value calculated from
ib_mtu_enum_to_int() is using as 'val' in FIELD_PREDP:

include/linux/compiler_types.h:328:38: error: call to
'__compiletime_assert_1524' declared with attribute error: FIELD_PREP:
value too large for the field

So a check is added about whether integer mtu from ib_mtu_enum_to_int() is
negative to avoid this warning.

Link: https://lore.kernel.org/r/1624262443-24528-3-git-send-email-liweihang@huawei.comReported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

There is no need to use "!!" before "eq->eqe_size ==
HNS_ROCE_V3_EQE_SIZE", or sparse will complain about "dubious: x & !y".

Fixes: 782832f2 ("RDMA/hns: Simplify the function config_eqc()")
Link: https://lore.kernel.org/r/1624262443-24528-2-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Both of HIP08 and HIP09 require the extended doorbell information to be
cleared before being used.

Fixes: 6b63597d ("RDMA/hns: Add TSQ link table support")
Link: https://lore.kernel.org/r/1623392089-35639-1-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

All functions of HIP09's ROCEE share on-chip resources for all QPs, the
driver needs configure the resource index and number for each function
during the init stage.

Link: https://lore.kernel.org/r/1622541427-42193-1-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The capbability configurations of PFs and VFs are coupled. Decoupling them
by abstracting some functions and reorganizing the configuration process.

Link: https://lore.kernel.org/r/1621860428-58009-1-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The HEM page size for QPC timer and CQC timer is always 4K and there's no
need to calculate a different size by the hns driver, otherwise the ROCEE
may access an invalid address.

Fixes: 719d1341 ("RDMA/hns: Remove duplicated hem page size config code")
Link: https://lore.kernel.org/r/1621589395-2435-4-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The base address table is allocated by dma allocator, and the size is
always aligned to PAGE_SIZE. If a fixed size is used to allocate the
table, the number of base address entries stored in the table will be
smaller than that can actually stored.

Link: https://lore.kernel.org/r/1621589395-2435-2-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The CRQ of CMDQ is unused, so remove code about it.

Link: https://lore.kernel.org/r/1621482876-35780-3-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The same name represents opposite meanings in new/old driver, it is hard
to maintain, so rename them to PI/CI.

Link: https://lore.kernel.org/r/1621482876-35780-2-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The timeout link table works in HIP08 ES version and the hns driver only
support the CS version for HIP08, so delete the related code. Then
simplify the buffer allocation for link table to make the code more
readable.

Link: https://lore.kernel.org/r/1621481751-27375-1-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Even in the case of heavy load, direct WQE can still be posted. The
hardware will decide whether to drop the DWQE or not. Thus, the limit
needs to be removed.

Fixes: 01584a5e ("RDMA/hns: Add support of direct wqe")
Link: https://lore.kernel.org/r/1619593950-29414-1-git-send-email-liweihang@huawei.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Remove duplicated code for setting hem page size in PF and VF.

Link: https://lore.kernel.org/r/1617715514-29039-7-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Introduce the VF support by adding code changes to allow VF PCI device
initialization, assgining the reserved resource of the PF to the active
VFs, setting the default abilities, applying the interruptions, resetting
and reducing the default QP/GID number to aovid exceeding the hardware
limitation.

Link: https://lore.kernel.org/r/1617715514-29039-6-git-send-email-liweihang@huawei.comSigned-off-by: NWei Xu <xuwei5@hisilicon.com>
Signed-off-by: NShengming Shu <shushengming1@huawei.com>
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Switch parameters of all functions belong to a PF should be set including
VFs.

Link: https://lore.kernel.org/r/1617715514-29039-5-git-send-email-liweihang@huawei.comSigned-off-by: NWei Xu <xuwei5@hisilicon.com>
Signed-off-by: NShengming Shu <shushengming1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Query the resource including EQC/SMAC/SGID from the firmware in the PF and
distribute fairly among all the functions belong to the PF.

Link: https://lore.kernel.org/r/1617715514-29039-4-git-send-email-liweihang@huawei.comSigned-off-by: NWei Xu <xuwei5@hisilicon.com>
Signed-off-by: NShengming Shu <shushengming1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Query how many functions are supported by the PF from the FW and store it
in the hns_roce_dev structure which will be used to support the
configuration of virtual functions.

Link: https://lore.kernel.org/r/1617715514-29039-3-git-send-email-liweihang@huawei.comSigned-off-by: NWei Xu <xuwei5@hisilicon.com>
Signed-off-by: NShengming Shu <shushengming1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Use hr_reg_write/read() to simplify codes about configuring function's
resource. And because the design of PF/VF fields is same, they can be
defined only once.

Link: https://lore.kernel.org/r/1617715514-29039-2-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>