- 01 6月, 2021 4 次提交
-
-
由 Christoph Hellwig 提交于
The bd_part_count value only makes sense for whole devices, so move it to struct gendisk and give it a more descriptive name. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NMing Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210525061301.2242282-7-hch@lst.deSigned-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Replace the per-block device bd_mutex with a per-gendisk open_mutex, thus simplifying locking wherever we deal with partitions. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMing Lei <ming.lei@redhat.com> Acked-by: NRoger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20210525061301.2242282-4-hch@lst.deSigned-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Add two new APIs to allocate and free a gendisk including the request_queue for use with BIO based drivers. This is to avoid boilerplate code in drivers. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210521055116.1053587-6-hch@lst.deSigned-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Add a flag to indicate that __device_add_disk did grab a queue reference so that disk_release only drops it if we actually had it. This sort out one of the major pitfals with partially initialized gendisk that a lot of drivers did get wrong or still do. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NLuis Chamberlain <mcgrof@kernel.org> Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210521055116.1053587-5-hch@lst.deSigned-off-by: NJens Axboe <axboe@kernel.dk>
-
- 20 5月, 2021 1 次提交
-
-
由 Christoph Hellwig 提交于
As an artifact of how gendisk lookup used to work in earlier kernels, GENHD_FL_UP is only cleared very late in del_gendisk, and a global lock is used to prevent opens from succeeding while del_gendisk is tearing down the gendisk. Switch to clearing the flag early and under bd_mutex so that callers can use bd_mutex to stabilize the flag, which removes the need for the global mutex. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMing Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210514131842.1600568-2-hch@lst.deSigned-off-by: NJens Axboe <axboe@kernel.dk>
-
- 09 4月, 2021 2 次提交
-
-
由 Christoph Hellwig 提交于
Just open code the xa_for_each in the remaining user. Signed-off-by: NChristoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210406062303.811835-12-hch@lst.deSigned-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Move the busy check and disk-wide sync into the only caller, so that the remainder can be shared with del_gendisk. Also pass the gendisk instead of the bdev as that is all that is needed. Signed-off-by: NChristoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210406062303.811835-5-hch@lst.deSigned-off-by: NJens Axboe <axboe@kernel.dk>
-
- 25 1月, 2021 4 次提交
-
-
由 Christoph Hellwig 提交于
Now that no fast path lookups in the partition table are left, there is no point in micro-optimizing the data structure for it. Just use a bog standard xarray. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
There is good reason to iterate backwards when deleting all partitions in del_gendisk, just like we don't in blk_drop_partitions. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Add a helper to call kobject_uevent for the disk and all partitions, and unexport the disk_part_iter_* helpers that are now only used in the core block code. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Commit 20bd1d02 ("scsi: sd: Keep disk read-only when re-reading partition") addressed a long-standing problem with user read-only policy being overridden as a result of a device-initiated revalidate. The commit has since been reverted due to a regression that left some USB devices read-only indefinitely. To fix the underlying problems with revalidate we need to keep track of hardware state and user policy separately. The gendisk has been updated to reflect the current hardware state set by the device driver. This is done to allow returning the device to the hardware state once the user clears the BLKROSET flag. The resulting semantics are as follows: - If BLKROSET sets a given partition read-only, that partition will remain read-only even if the underlying storage stack initiates a revalidate. However, the BLKRRPART ioctl will cause the partition table to be dropped and any user policy on partitions will be lost. - If BLKROSET has not been set, both the whole disk device and any partitions will reflect the current write-protect state of the underlying device. Based on a patch from Martin K. Petersen <martin.petersen@oracle.com>. Reported-by: NOleksii Kurochko <olkuroch@cisco.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201221Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMing Lei <ming.lei@redhat.com> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 02 12月, 2020 16 次提交
-
-
由 Christoph Hellwig 提交于
Instead of having two structures that represent each block device with different life time rules, merge them into a single one. This also greatly simplifies the reference counting rules, as we can use the inode reference count as the main reference count for the new struct block_device, with the device model reference front ending it for device model interaction. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Switch the partition iter infrastructure to iterate over block_device references instead of hd_struct ones mostly used to get at the block_device. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Just use the bd_partno field in struct block_device everywhere. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Use struct block_device to lookup partitions on a disk. This removes all usage of struct hd_struct from the I/O path. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NHannes Reinecke <hare@suse.de> Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs] Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Allocate hd_struct together with struct block_device to pre-load the lifetime rule changes in preparation of merging the two structures. Note that part0 was previously embedded into struct gendisk, but is a separate allocation now, and already points to the block_device instead of the hd_struct. The lifetime of struct gendisk is still controlled by the struct device embedded in the part0 hd_struct. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Move the policy field to struct block_device and rename it to the more descriptive bd_read_only. Also turn the field into a bool as it is used as such. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Move the make_it_fail flag to struct block_device an turn it into a bool in preparation of killing struct hd_struct. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Move the holder_dir field to struct block_device in preparation for kill struct hd_struct. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Move the partition_meta_info to struct block_device in preparation for killing struct hd_struct. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Move the start_sect field to struct block_device in preparation of killing struct hd_struct. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Move the dkstats and stamp field to struct block_device in preparation of killing struct hd_struct. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Now that the hd_struct always has a block device attached to it, there is no need for having two size field that just get out of sync. Additionally the field in hd_struct did not use proper serialization, possibly allowing for torn writes. By only using the block_device field this problem also gets fixed. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NHannes Reinecke <hare@suse.de> Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs] Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Now that struct hd_struct has a block_device pointer use that to find the disk. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NHannes Reinecke <hare@suse.de> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
To simplify block device lookup and a few other upcoming areas, make sure that we always have a struct block_device available for each disk and each partition, and only find existing block devices in bdget. The only downside of this is that each device and partition uses a little more memory. The upside will be that a lot of code can be simplified. With that all we need to look up the block device is to lookup the inode and do a few sanity checks on the gendisk, instead of the separate lookup for the gendisk. For blk-cgroup which wants to access a gendisk without opening it, a new blkdev_{get,put}_no_open low-level interface is added to replace the previous get_gendisk use. Note that the change to look up block device directly instead of the two step lookup using struct gendisk causes a subtile change in behavior: accessing a non-existing partition on an existing block device can now cause a call to request_module. That call is harmless, and in practice no recent system will access these nodes as they aren't created by udev and static /dev/ setups are unusual. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Split each case into a self-contained helper, and move the block dependent code entirely under the pre-existing #ifdef CONFIG_BLOCK. This allows to remove the blk_lookup_devt stub in genhd.h. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NTejun Heo <tj@kernel.org> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 16 11月, 2020 4 次提交
-
-
由 Christoph Hellwig 提交于
The update_bdev argument is always set to true, so remove it. Also rename the function to the slighly less verbose set_capacity_and_notify, as propagating the disk size to the block device isn't really revalidation. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NPetr Vorel <pvorel@suse.cz> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Now that bdev_map is only used for finding gendisks, we can use a simple xarray instead of the regions tracking structure for it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Add a callback to the major_names array that allows a driver to override how to probe for dev_t that doesn't currently have a gendisk registered. This will help separating the lookup of the gendisk by dev_t vs probe action for a not currently registered dev_t. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Fold set_device_ro into its only remaining caller. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 13 11月, 2020 1 次提交
-
-
由 Christoph Hellwig 提交于
Return if the function ended up sending an uevent or not. Cc: stable@vger.kernel.org # v5.9 Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NPetr Vorel <pvorel@suse.cz> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 24 9月, 2020 1 次提交
-
-
由 Christoph Hellwig 提交于
We can only scan for partitions on the whole disk, so move the flag from struct block_device to struct gendisk. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 10 9月, 2020 2 次提交
-
-
由 Christoph Hellwig 提交于
Remove the now unused check_disk_change helper. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Like check_disk_changed, except that it does not call ->revalidate_disk but leaves that to the caller. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 02 9月, 2020 5 次提交
-
-
由 Christoph Hellwig 提交于
Remove the now unused helper. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by: NSong Liu <song@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
Only virtio_blk and xen-blkfront set the revalidate argument to true, and both do not implement the ->revalidate_disk method. So switch to the helper that just updates the size instead. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
revalidate_disk is a relative awkward helper for driver use, as it first calls an optional driver method and then updates the block device size, while most callers either don't need the method call at all, or want to keep state between the caller and the called method. Add a revalidate_disk_size helper that just performs the update of the block device size from the gendisk one, and switch all drivers that do not implement ->revalidate_disk to use the new helper instead of revalidate_disk() Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by: NSong Liu <song@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
The alignment offset is only used in slow path callers, so just calculate it on the fly. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
The alignment offset is only used in slow path callers, so just calculate it on the fly. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-