pci_find_slot isn't hot-plug safe.  Move this code to the pci hotplug
safe equivalent and hold a refcount properly while doing
make_one_node_map.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

32-bit powerpc systems define a macro, PHYS_FMT, giving a printf
format string fragment for displaying physical addresses, since most
32-bit powerpc platforms use 32-bit physical addresses but a few use
64-bit physical addresses.

This macro is used in exactly one place, a rare error message, where
we can solve the problem more simply by just unconditionally casting
the address up to 64-bit quantity before formatting it.

This patch does so, meaning that as we bring MMU definitions from
asm-ppc over to asm-powerpc, cleaning them up in the process, we don't
need to implement this ugly macro (which additionally has a very bad
name for something global).
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Replace uses with of_find_node_by_name and for_each_node_by_name.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Replaced by of_find_node_by_type.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Replaced by of_find_node_by_path.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This old interface has no more users.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This is an old interface and is replaced by of_find_compatible_node.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

BenH's commit a741e679 in powerpc.git,
although (AFAICT) only intended to affect ppc64, also has side-effects
which break 44x.  I think 40x, 8xx and Freescale Book E are also
affected, though I haven't tested them.

The problem lies in unconditionally removing flush_tlb_pending() from
the versions of flush_tlb_mm(), flush_tlb_range() and
flush_tlb_kernel_range() used on ppc64 - which are also used the
embedded platforms mentioned above.

The patch below cleans up the convoluted #ifdef logic in tlbflush.h,
in the process restoring the necessary flushes for the software TLB
platforms.  There are three sets of definitions for the flushing
hooks: the software TLB versions (revised to avoid using names which
appear to related to TLB batching), the 32-bit hash based versions
(external functions) amd the 64-bit hash based versions (which
implement batching).

It also moves the declaration of update_mmu_cache() to always be in
tlbflush.h (previously it was in tlbflush.h except for PPC64, where it
was in pgtable.h).

Booted on Ebony (440GP) and compiled for 64-bit and 32-bit
multiplatform.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Save the trap number in the case of getting a bad stack in an exception
handler. It is sometimes useful to know what exception it was that caused
this to happen. Without this, no trap number is reported.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Rename MPIC_BROKEN_U3 to something a little more descriptive. Its
effect is to enable support for HT irqs behind the PCI-X/HT bridge on
U3/U4 (aka. CPC9x5) parts.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Use `unsigned long' for malloc sizes, to match common practice and types used
by most callers and callees.
Also use `unsigned long' for integers representing pointers in simple_alloc.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@eu.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch adds a driver to arch/powerpc/sysdev for the UIC, the
on-chip interrupt controller from IBM/AMCC 4xx chips.  It uses the new
irq host mapping infrastructure.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Now that we always take a device tree in arch/powerpc, there's no good
reason not to allow a single kernel to support multiple embedded 4xx
boards - the correct platform code can be selected based on the device
tree information.

Therefore, this patch re-arranges the 4xx Kconfig code to allow this.
In addition we:
	- use "select" instead of depends to configure the correct
	  config options for specific 4xx CPUs and workarounds, which
	  makes the information about specific boards and CPUs less
	  scattered.
	- Some old, unused (in arch/powerpc) config options are
	  removed: WANT_EARLY_SERIAL, IBM_OCP, etc.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

For cases when probes are placed on instructions that can be emulated,
don't take the single-step exception.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Emulate a few more instructions in software - especially useful during
singlestepping (xmon/kprobes).

Instructions emulated with this patch are mfcr/mtcr rX, mfxer/mtxer rX,
mflr/mtlr rX, mfctr/mtctr rX and mr rA,rB.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This adds cuboot support for MPC83xx platforms.

A device tree used with this must have linux,stdout-path in /chosen and
linux,network-index in any network device nodes that need mac addresses
assigned.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This file describes the bd_t struct, which is used by old versions of
U-boot to pass information to the kernel.  Platform code that needs to
interoperate with such firmware can use this; it should not be used for
anything new.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The cuImage target will build a uImage with bootwrapper code and a device
tree.  The default device tree and platform file are determined by the
kernel configuration.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This provides a way to tell the bootwrapper makefile which device tree to
include by default.  The wrapper can still be invoked standalone to wrap
with a different device tree without reconfiguring the kernel, if that is
desired.

The user will only be asked to provide a device tree if the platform
selects CONFIG_WANT_DEVICE_TREE.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

MDIO driver for PHY's connected via GPIO as on the PA Semi Electra
eval board.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Oprofile support for PA6T, kernel side.

Also rename the PA6T_SPRN.* defines to SPRN_PA6T.*.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Reset MPIC on boot to clear some timer state that firmware might
leave configured.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Minor HID change. Firmware can't know that we want this set so we have
to set it in the kernel.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Device 0 function 0 on the root bus is really a two-function bus agent,
but only the first function is visible. Because of this, we need to
allow config accesses into the second range. Modify the check for valid
offsets accordingly.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

PowerPC 750CL has high BATs.  The patch below adds a CPU_FTRS_750CL that
includes that.  Without it, the original firmware mappings in the high BATs
aren't cleared which continue to override the linux translations.

It also adds CPU_FTR_COMMON to CPU_FTRS_750GX for completeness.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fix a handful of comment typos for hvc_console.
Signed-off-by: NWill Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add a back-off mechanism to hvc_console's polling logic.   This change
drops the timers/second ratio from ~90 to ~1/2 while the console is
idle.
This change is most noticeable when watching /proc/timer_stats output.

This only affects when the hvc_console is running in poll mode, i.e.
power4 and cell systems.

I've tested on Power4, Michael Ellerman has both contributed to the
patch and tested on cell.
Signed-off-by: NWill Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

These got added recently.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

It turns out that commit e4805922
breaks some existing systems that use the via82cxxx driver.  This
reverts the change to via82cxxx.c.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Merge branch 'for-2.6.22' of master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6 into for-2.6.22

Sync with the Kconfig changes, and enable some options for celleb

Cc: Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
Signed-off-by: NJens Osterkamp <jens@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

Enable Periodic Recalibration (PTCAL) support for Cell XDR memory,
using the new ibm,cbe-start-ptcal and ibm,cbe-stop-ptcal RTAS calls.

Tested on QS20 and QS21 (by Thomas Huth). It seems that SLOF has
problems disabling, at least on QS20; this patch should only be
used once these problems have been addressed.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

This patch adds support for a proper device-tree.
A porper device-tree on cell contains be nodes
for each CBE containg nodes for SPEs and all the
other special devices on it.
Ofcourse oldschool devicetree is still supported.
Signed-off-by: NChristian Krafft <krafft@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

The of_iomap function maps memory for a given
device_node and returns a pointer to that memory.
This is used at some places, so it makes sense to
a seperate function.
Signed-off-by: NChristian Krafft <krafft@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

At the moment the pmi device driver is probing for devices with
a given type and a given name. As there may be devices of
the same type but with a different name, probing should be
done also for device type only.
Signed-off-by: NChristian Krafft <krafft@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

This patch adds a check for the private driver data to be initialized.
The bug showed up, as the caller found a pmi device by it's type.
Whereas the pmi driver probes for the type and the name.
Since the name was not as the driver expected, it did not initialize.
A more relaxed probing will be supplied with an extra patch, too.
Signed-off-by: NChristian Krafft <krafft@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

The new PMI driver was added in order to support
cpufreq on blades that require the frequency to
be controlled by the service processor, so use it
on those.
Signed-off-by: NChristian Krafft <krafft@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>