Increase the CMA size to 64 MiB, otherwise it isn't possible to use
etnaviv driver on systems with 1920x1080 panel due to insufficient
memory .
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Select CONFIG_SND_SOC_WM8960 so that we can have audio functional
by default on imx6ul-evk and imx7-sdb boards.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Add MPL3115 NXP pressure sensor configuration.

This sensor is used by warp7 board.
Signed-off-by: NBreno Lima <breno.lima@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Select CONFIG_DRM_ETNAVIV, so that GPU support can be enabled by default.

Generated by manually selecting CONFIG_DRM_ETNAVIV and
then running:

make savedefconfig
cp defconfig arch/arm/configs/imx_v6_v7_defconfig

,which results in additional cleanup.
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

- USB test module
- USB gadget functions using configfs which are just ready within
  several release cycles.
- USB audio gadget
Signed-off-by: NPeter Chen <peter.chen@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Add CONFIG_TOUCHSCREEN_ADS7846 support.
Signed-off-by: NDiego Dorta <diego.dorta@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The USB Function FS gadget can be very useful for debugging.

For instance, the adbd daemon can leverage this gadget to
offer an ADB connection to the platform over USB.

Note that adbd is available on many OS/build systems:
- Ubuntu: see android-tools-adbd package [1]
- Yocto: see meta-smartphone android-tools recipe [2]
- Buildroot: see android-tools package [3]

[1] http://packages.ubuntu.com/trusty/android-tools-adbd
[2] https://github.com/shr-distribution/meta-smartphone/tree/shr/meta-android/recipes-android/android-tools
[3] https://git.buildroot.net/buildroot/tree/package/android-toolsSigned-off-by: NGary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

At some boards, it has no ethernet support. As an alternative, we can use
USB Ethernet card to support NFS (u-boot supports it too). It supports
AXIS cards which are used most frequently.
Signed-off-by: NPeter Chen <peter.chen@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The driver for Micrel PHYs is required for the Apalis iMX6 module
plugged into a Ixora carrier board featuring an on-module Micrel
KSZ9031 Gigabit PHY.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The GPIO-based bitbanging I2C driver is required to make HDMI work on
the Apalis iMX6 module plugged into a Ixora carrier board featuring a
DDC channel to read a screen's EDID being hooked up to regular GPIOs.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The rv4168 RTC is used by the following platforms:
- Nitrogen6_MAX (both Quad and Quad Plus versions)
- Nitrogen7
Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

I2C muxing is used on Nitrogen6_MAX board from Boundary Devices.
Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Those two touch controllers are used by Boundary Devices platforms.
Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable configuration options useful for Vybrid:
- NFC NAND driver
- USB dual-role controller support
- FTM PWM driver
- DSPI SPI driver
- Colibri VF50 Touchscreen support.

Beside that, enable useful configurations such as IIO hwmon support
(used in i.MX 23/28, patch pending for Vybrid), PWM LED support and
CPU idle support.

Regenerated config using savedefconfig (which removes some configs
which are now enabled by default).
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Select the sahara crypto driver that is used on i.MX53.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Select the i.mx ocotp driver.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

i.MX7D uboot support psci firmware.
Enabled psci default.
Signed-off-by: NFrank Li <Frank.Li@freescale.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

This has been stable on i.MX6 for a good while now and there is no
reason to keep it disabled, as it allows to allocate non-shared
IRQs if several PCIe devices are connected to a single host.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Select CONFIG_DRM_DW_HDMI_AHB_AUDIO so that we have HDMI audio
supported by default.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The vf610 adc driver is present on Vybrid, MX6SX, MX6UL and MX7D.

Select it by default.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NFugang Duan <B38611@freescale.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

imx_v6_v7_defconfig is not suitable for booting LS1021 as it needs
LPAE.

Remove this option.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

CONFIG_VMSPLIT_2G was added to mx5_defconfig by commit 06965c39
("ARM i.MX5: update defconfig") to fix an issue where mx53 was not
detecting the full 1GiB memory range.

However, as explained by Russell King [1] the correct fix is to select
CONFIG_HIGHMEM.

imx_v6_v7_deconfig inherited such option from mx5_defconfig.

As imx_v6_v7_deconfig has CONFIG_HIGHMEM=y, we should no longer
select such non-standard CONFIG_VMSPLIT_2G option.

[1] http://www.spinics.net/lists/arm-kernel/msg137839.htmlSigned-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable imx6ul touchscreen controller
Signed-off-by: NHaibo Chen <haibo.chen@freescale.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Select CAAM for i.MX6 devices.
Signed-off-by: NVictoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: NHoria Geantă <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

It is useful to know how the kernel was configured via:
zcat /proc/config.gz ,so select the CONFIG_IKCONFIG_PROC option.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

default enable imx6ul support
Signed-off-by: NFrank Li <Frank.Li@freescale.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

build in snvs powerkey
build in syscon power off support
Signed-off-by: NFrank Li <Frank.Li@freescale.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The old warp board revision had hardware issues that prevented
the RTS/CTS lines to work with the Bluetooth module.

Tha latest rev1.12 fixes this problem, so now we should better use
CONFIG_BT_HCIUART_H4 instead, as it provides a better throughput than
the CONFIG_BT_HCIUART_3WIRE option.
Suggested-by: NArthur Lambert <arthur@dreem.com>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Add ASRC, FSL_ASOC_CARD, CS42xx8 support
Signed-off-by: NShengjiu Wang <shengjiu.wang@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Select CONFIG_KEXEC by default.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

APF6 Dual and Quad SoM have an wl1271 wifi/bt chip. This chip needs
CONFIG_BT_HCIUART_LL.
APF6Dev carrier board has a SX8654 I2C touchscreen controller.
Signed-off-by: NSébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Add imx7d support
Signed-off-by: NFrank Li <Frank.Li@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Enable CONFIG_SOC_LS1021A by default.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

RTC PCF8523 is used on some mx6 cubox-i boards.

Let it work by default.
Reported-by: NRick Thomas <rbthomas@cube.rcthomas.org>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Enable Bluetooth over serial support.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

It is used for max7310 gpio expandor which is used at imx6qdl
sabreauto board.
Signed-off-by: NPeter Chen <peter.chen@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

USB Ethernet function at host mode
USB Media function(webcam) at host mode
USB Audio function at host mode
USB Serial function at host mode
USB EHSET driver at host mode (for OTG & EH Certification test)
Several USB Gadget functions:
	- Configfs
	- NCM
	- Zero (used for test)
	- Gadgetfs
	- Serial

Above functions are built as module.
Signed-off-by: NPeter Chen <peter.chen@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

CONFIG_FB_MXS is the LCD driver for mx6solo-lite and mx6solox.

Enable it by default.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

SPI_FSL_QUADSPI can be used by Vybrid and mx6sx, so select it by default.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Add POWER_RESET_SYSCON since Vybrid SoC's now make use of this
driver to provide software reset capabilities through the SRC
module.

Also regenerated using savedefconfig which removed the config
BACKLIGHT_LCD_SUPPORT which is now selected by default since
commit 9c8ee3c7 ("video: mx3fb: always enable
BACKLIGHT_LCD_SUPPORT").
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>