Add compatible for Firefly ROC-RK3308-CC board.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20191030072648.29738-1-andy.yan@rock-chips.comSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

Fixup some typos and inconsistencies in the grf binding.
Signed-off-by: NPeter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20191028182254.30739-3-pgwipeout@gmail.comSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

Correct the voltage supplies according to the board schematics
ROC-3399-PC-V10-A-20180804.
Signed-off-by: NMarkus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/22b56700-3c9e-0f60-cd74-7ff24d4f1a23@fivetechno.deSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

rk3399-roc-pc has vcc_sys 5V supply for USB and other peripherals.
Add the GPIO pin to enable the regulator.
Signed-off-by: NMarkus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/c72db0ad-c261-af4f-efe6-22bbcf4a0b7b@fivetechno.deSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

rk3399-roc-pc has a power and a recovery button, enable them.
Signed-off-by: NMarkus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/1ce152cc-bd6b-63af-7892-221e084d087f@fivetechno.deSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

Enable the phy node ion the px30 evb board.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20190917082659.25549-13-heiko@sntech.de

Add the usb2phy node on the px30 and hook it up to the usb controllers
it supplies.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20190917082659.25549-12-heiko@sntech.de

Having a default optee node in a soc devicetree is not really good.
For one there is no guarantee that any tee got loaded and there's even
the possibility that a completely different TEE got loaded.

OP-Tee however will insert relevant nodes to the devicetree (firmware
+reserved memory sections) during its own startup, so there really is
no need to provide a default node.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20191023224409.3550-1-heiko@sntech.de

Set the supplying regulator and enable the gpu node on the rk3399-puma som.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20191023223954.3139-1-heiko@sntech.de

The px30 soc contains a controller for one-time-programmable memory,
so add the necessary node for it and the fields defined in it by default.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20191023224113.3268-1-heiko@sntech.de

rk3399-roc-pc has three gpio LEDs, enable them.
Signed-off-by: NMarkus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/7d8d85c9-5fde-7943-a6b6-639bca38bdc1@fivetechno.deSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

This board use uart4 as debug port and arm core voltage
is modulated by pwm, logic voltage is fixed to 1.05V.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20191021084657.28629-1-andy.yan@rock-chips.comSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

Add compatible for RK3308 Evaluation board
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191021084642.28562-1-andy.yan@rock-chips.comSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

RK3308 is a quad Cortex A35 based SOC with rich audio
interfaces(I2S/PCM/TDM/PDM/SPDIF/VAD/HDMI ARC), which
designed for intelligent voice interaction and audio
input/output processing.

This patch add basic core dtsi file for it.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20191021084616.28431-1-andy.yan@rock-chips.comSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

RK3308 GRF is divided into four sections: GRF, SGRF,
DETECTGRF, COREGRF. This patch add documentation for
it.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191021084555.28356-1-andy.yan@rock-chips.comSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

The defines RK_FUNC_1, RK_FUNC_2, RK_FUNC_3 and RK_FUNC_4
are no longer used. Mark them as "deprecated"
to prevent that someone start using them again.
Signed-off-by: NJohan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20191015205852.4200-2-jbx6244@gmail.comSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

The define RK_FUNC_1 is no longer used,
so restyle the rockchip,pins definitions.
Signed-off-by: NJohan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20191015205852.4200-1-jbx6244@gmail.comSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

Use the now-preferred generic phy reset properties instead of the
dwmac-specific ones.
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/4d16c24ae3651a2119cf5bb1213f46a9fce4b39a.1570444773.git.robin.murphy@arm.comSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

All the nanopi4 boards have HDMI, so let them make noise on it.
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/7fe6e94e4b9f5986f19f2637b7b716f0cb54de1b.1570444701.git.robin.murphy@arm.comSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

Scarlet and Bob use the Google-developed cr50 chip to do things
like TPM and closed-case-debugging.

Add the nodes describing the cr50 and its spi-connection.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20180822120925.12388-1-heiko@sntech.de

This patch adds audio codec (Everest ES8316) and I2S audio nodes for
RK3399 RockPro64.
Signed-off-by: NKatsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907174833.19957-1-katsuhiro@katsuster.netSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

The rk3399 gic-its was missing the #msi-cells property as found by
dt-schema checks, so add it.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20190917083625.25818-1-heiko@sntech.de

Few, know rk808 pmic regulators VCC[1-4], VCC[6-7], VCC[9-11],
VDD_LOG, VDD_GPU, VDD_CPU_B, VCC3V3_SYS are inputting with vcc_sys
which is 5V power rail from dc_12v.

So, replace the vin-supply of above mentioned regulators
with vcc_sys as per the PMIC-RK808-D page of roc-rk3399-pc
schematics.
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20190919052822.10403-7-jagan@amarulasolutions.comSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

It is always better practice to follow regulator naming conventions
as per the schematics for future references.

This would indeed helpful to review and check the naming convention
directly on schematics, both for the code reviewers and the developers.

So, rename vcc12v_sys into dc_12v as per rk3399 power tree as per
roc-rk3399-pc schematics.
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20190919052822.10403-6-jagan@amarulasolutions.comSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

One of the separate General Register Files contains the registers for
controlling the usb2phy, so add the necessary binding compatible for it.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20190917082659.25549-11-heiko@sntech.de

Enable i2c1 and adds the devices connected to it.
This includes a magnetometer, goodix-touchscreen and accelerometer.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20190917082659.25549-10-heiko@sntech.de

The px30 contains 2 separate clock controllers the regular cru creating
most clocks as well as the pmucru managing the GPLL and some other clocks.

The gpll of course also is needed by the cru, so while we normally do rely
on clock names to associate clocks getting probed later on (for example
xin32k coming from an i2c device in most cases) it is safer to declare the
explicit dependency between the two crus. This makes sure that for example
the clock-framework probes them in the correct order from the start.

The assigned-clocks properties were simply working by chance in the past
so split them accordingly to the 2 crus to honor the loading direction.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20190917082659.25549-9-heiko@sntech.de

These are unused gpio-settings for specific function pins, that
are not used by anything and only clutter up the dtsi.
They can be re-added when a relevant user is added.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20190917082659.25549-8-heiko@sntech.de

The px30-evb exposes uart2 through a uart-to-usb converter on the board
but these pins are shared with the sdmmc controller. With both activated
this results in a race condition depending in the probe order.
Whichever of the two probes first will break the other peripheral.

The px30-evb also exposes uart5 through pin its pin headers, so it's way
saner to use these pins for serial output and keep the sdmmc working in
all cases.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20190917082659.25549-7-heiko@sntech.de

Hook the reset line into an emmc-pwrseq for it to get initialized nicely.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20190917082659.25549-6-heiko@sntech.de

Add the board's pmic (rk809) and hook up the real supplies to their
consumers. This is especially important as cpufreq would otherwise hang
the system when scaling the frequency without adjusting the voltage.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20190917082659.25549-5-heiko@sntech.de

emmc chips are normally hooked up in standard ways using the full 8bit
bus connection, so there should be no need for all future boards to define
this on their own. So add default pin setups for 8bit busses and special
boards really only needing 4 or 1 bit connections can override.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20190917082659.25549-4-heiko@sntech.de

That gpio1-b0 can only be flash_cs apart from a regular gpio,
so there is no power-related pinmux for the emmc for this pin.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20190917082659.25549-3-heiko@sntech.de

Similar to all other Rockchip SoCs the px30 does not have a static
32kHz clock. Instead it again gets supplied from an external component
like the pmic.

So drop the static clock, so that we can hook up the right one.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20190917082659.25549-2-heiko@sntech.de

The iommu clock names are aclk+iface not aclk+hclk as in the vendor kernel,
so fix that in the px30.dtsi
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20190917082659.25549-1-heiko@sntech.de

Pull btrfs fixes from David Sterba:
 "A bunch of fixes that accumulated in recent weeks, mostly material for
  stable.

  Summary:

   - fix for regression from 5.3 that prevents to use balance convert
     with single profile

   - qgroup fixes: rescan race, accounting leak with multiple writers,
     potential leak after io failure recovery

   - fix for use after free in relocation (reported by KASAN)

   - other error handling fixups"

* tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls
  btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space
  btrfs: Fix a regression which we can't convert to SINGLE profile
  btrfs: relocation: fix use-after-free on dead relocation roots
  Btrfs: fix race setting up and completing qgroup rescan workers
  Btrfs: fix missing error return if writeback for extent buffer never started
  btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer
  Btrfs: fix selftests failure due to uninitialized i_mode in test inodes

Pull csky updates from Guo Ren:
 "This round of csky subsystem just some fixups:

   - Fix mb() synchronization problem

   - Fix dma_alloc_coherent with PAGE_SO attribute

   - Fix cache_op failed when cross memory ZONEs

   - Optimize arch_sync_dma_for_cpu/device with dma_inv_range

   - Fix ioremap function losing

   - Fix arch_get_unmapped_area() implementation

   - Fix defer cache flush for 610

   - Support kernel non-aligned access

   - Fix 610 vipt cache flush mechanism

   - Fix add zero_fp fixup perf backtrace panic

   - Move static keyword to the front of declaration

   - Fix csky_pmu.max_period assignment

   - Use generic free_initrd_mem()

   - entry: Remove unneeded need_resched() loop"

* tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux:
  csky: Move static keyword to the front of declaration
  csky: entry: Remove unneeded need_resched() loop
  csky: Fixup csky_pmu.max_period assignment
  csky: Fixup add zero_fp fixup perf backtrace panic
  csky: Use generic free_initrd_mem()
  csky: Fixup 610 vipt cache flush mechanism
  csky: Support kernel non-aligned access
  csky: Fixup defer cache flush for 610
  csky: Fixup arch_get_unmapped_area() implementation
  csky: Fixup ioremap function losing
  csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range
  csky/dma: Fixup cache_op failed when cross memory ZONEs
  csky: Fixup dma_alloc_coherent with PAGE_SO attribute
  csky: Fixup mb() synchronization problem

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes that have trickled in through the merge window:

   - Video fixes for OMAP due to panel-dpi driver removal

   - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7

   - Fixing arch version on ASpeed ast2500

   - Two fixes for reset handling on ARM SCMI"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: aspeed: ast2500 is ARMv6K
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

Pull tracing fixes from Steven Rostedt:
 "A few more tracing fixes:

   - Fix a buffer overflow by checking nr_args correctly in probes

   - Fix a warning that is reported by clang

   - Fix a possible memory leak in error path of filter processing

   - Fix the selftest that checks for failures, but wasn't failing

   - Minor clean up on call site output of a memory trace event"

* tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  selftests/ftrace: Fix same probe error test
  mm, tracing: Print symbol name for call_site in trace events
  tracing: Have error path in predicate_parse() free its allocated memory
  tracing: Fix clang -Wint-in-bool-context warnings in IF_ASSIGN macro
  tracing/probe: Fix to check the difference of nr_args before adding probe