Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 02 10月, 2011 2 次提交
    • A
      btrfs: add READAHEAD extent buffer flag · ab0fff03
      由 Arne Jansen 提交于 
      Add a READAHEAD extent buffer flag.
Add a function to trigger a read with this flag set.

Changes v2:
 - use extent buffer flags instead of extent state flags

Changes v5:
 - adapt to changed read_extent_buffer_pages interface
 - don't return eb from reada_tree_block_flagged if it has CORRUPT flag set
Signed-off-by: NArne Jansen <sensille@gmx.net>
      ab0fff03
    • A
      btrfs: add an extra wait mode to read_extent_buffer_pages · bb82ab88
      由 Arne Jansen 提交于 
      read_extent_buffer_pages currently has two modes, either trigger a read
without waiting for anything, or wait for the I/O to finish. The former
also bails when it's unable to lock the page. This patch now adds an
additional parameter to allow it to block on page lock, but don't wait
for completion.

Changes v5:
 - merge the 2 wait parameters into one and define WAIT_NONE, WAIT_COMPLETE and
   WAIT_PAGE_LOCK

Change v6:
 - fix bug introduced in v5
Signed-off-by: NArne Jansen <sensille@gmx.net>
      bb82ab88
  3. 01 10月, 2011 1 次提交
    • J
      Btrfs: force a page fault if we have a shorty copy on a page boundary · b6316429
      由 Josef Bacik 提交于 
      A user reported a problem where ceph was getting into 100% cpu usage while doing
some writing.  It turns out it's because we were doing a short write on a not
uptodate page, which means we'd fall back at one page at a time and fault the
page in.  The problem is our position is on the page boundary, so our fault in
logic wasn't actually reading the page, so we'd just spin forever or until the
page got read in by somebody else.  This will force a readpage if we end up
doing a short copy.  Alexandre could reproduce this easily with ceph and reports
it fixes his problem.  I also wrote a reproducer that no longer hangs my box
with this patch.  Thanks,
Reported-and-tested-by: NAlexandre Oliva <aoliva@redhat.com>
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>
      b6316429
  5. 21 9月, 2011 1 次提交
  7. 18 9月, 2011 6 次提交
    • J
      Btrfs: only clear the need lookup flag after the dentry is setup · a66e7cc6
      由 Josef Bacik 提交于 
      We can race with readdir and the RCU path walking stuff.  This is because we
clear the need lookup flag before actually instantiating the inode.  This will
lead the RCU path walk stuff to find a dentry it thinks is valid without a
d_inode attached.  So instead unhash the dentry when we first start the lookup,
and then clear the flag after we've instantiated the dentry so we're garunteed
to either try the slow lookup, or have the d_inode set properly.
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>
      a66e7cc6
    • J
      BTRFS: Fix lseek return value for error · 48802c8a
      由 Jeff Liu 提交于 
      The recent reworking of btrfs' lseek lead to incorrect
values being returned.  This adds checks for seeking
beyond EOF in SEEK_HOLE and makes sure the error
values come back correct.

Andi Kleen also sent in similar patches.
Signed-off-by: NJie Liu <jeff.liu@oracle.com>
Reported-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>
      48802c8a
    • L
      Btrfs: don't change inode flag of the dest clone file · dde820fb
      由 Li Zefan 提交于 
      The dst file will have the same inode flags with dst file after
file clone, and I think it's unexpected.

For example, the dst file will suddenly become immutable after
getting some share of data with src file, if the src is immutable.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>
      dde820fb
    • L
      Btrfs: don't make a file partly checksummed through file clone · 0e7b824c
      由 Li Zefan 提交于 
      To reproduce the bug:

  # mount /dev/sda7 /mnt
  # dd if=/dev/zero of=/mnt/src bs=4K count=1
  # umount /mnt

  # mount -o nodatasum /dev/sda7 /mnt
  # dd if=/dev/zero of=/mnt/dst bs=4K count=1
  # clone_range -s 4K -l 4K /mnt/src /mnt/dst

  # echo 3 > /proc/sys/vm/drop_caches
  # cat /mnt/dst
  # dmesg
  ...
  btrfs no csum found for inode 258 start 0
  btrfs csum failed ino 258 off 0 csum 2566472073 private 0

It's because part of the file is checksummed and the other part is not,
and then btrfs will complain checksum is not found when we read the file.

Disallow file clone if src and dst file have different checksum flag,
so we ensure a file is completely checksummed or unchecksummed.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>
      0e7b824c
    • L
      Btrfs: fix pages truncation in btrfs_ioctl_clone() · 71ef0786
      由 Li Zefan 提交于 
      It's a bug in commit f81c9cdc
(Btrfs: truncate pages from clone ioctl target range)

We should pass the dest range to the truncate function, but not the
src range.

Also move the function before locking extent state.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>
      71ef0786
    • H
      btrfs: fix d_off in the first dirent · 3765fefa
      由 Hidetoshi Seto 提交于 
      Since the d_off in the first dirent for "." (that originates from
the 4th argument "offset" of filldir() for the 2nd dirent for "..")
is wrongly assigned in btrfs_real_readdir(), telldir returns same
offset for different locations.

 | # mkfs.btrfs /dev/sdb1
 | # mount /dev/sdb1 fs0
 | # cd fs0
 | # touch file0 file1
 | # ../test
 | telldir: 0
 | readdir: d_off = 2, d_name = "."
 | telldir: 2
 | readdir: d_off = 2, d_name = ".."
 | telldir: 2
 | readdir: d_off = 3, d_name = "file0"
 | telldir: 3
 | readdir: d_off = 2147483647, d_name = "file1"
 | telldir: 2147483647

To fix this problem, pass filp->f_pos (which is loff_t) instead.

 | # ../test
 | telldir: 0
 | readdir: d_off = 1, d_name = "."
 | telldir: 1
 | readdir: d_off = 2, d_name = ".."
 | telldir: 2
 | readdir: d_off = 3, d_name = "file0"
 :

At the moment the "offset" for "." is unused because there is no
preceding dirent, however it is better to pass filp->f_pos to follow
grammatical usage.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>
      3765fefa
  9. 13 9月, 2011 2 次提交
  11. 11 9月, 2011 11 次提交
  13. 10 9月, 2011 2 次提交
    • N
      Avoid dereferencing a 'request_queue' after last close. · 94007751
      由 NeilBrown 提交于 
      On the last close of an 'md' device which as been stopped, the device
is destroyed and in particular the request_queue is freed.  The free
is done in a separate thread so it might happen a short time later.

__blkdev_put calls bdev_inode_switch_bdi *after* ->release has been
called.

Since commit f758eeab
bdev_inode_switch_bdi will dereference the 'old' bdi, which lives
inside a request_queue, to get a spin lock.  This causes the last
close on an md device to sometime take a spin_lock which lives in
freed memory - which results in an oops.

So move the called to bdev_inode_switch_bdi before the call to
->release.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: stable@kernel.org
Signed-off-by: NNeilBrown <neilb@suse.de>
      94007751
    • M
      vfs: automount should ignore LOOKUP_FOLLOW · 0ec26fd0
      由 Miklos Szeredi 提交于 
      Prior to 2.6.38 automount would not trigger on either stat(2) or
lstat(2) on the automount point.

After 2.6.38, with the introduction of the ->d_automount()
infrastructure, stat(2) and others would start triggering automount
while lstat(2), etc. still would not.  This is a regression and a
userspace ABI change.

Problem originally reported here:

  http://thread.gmane.org/gmane.linux.kernel.autofs/6098

It appears that there was an attempt at fixing various userspace tools
to not trigger the automount.  But since the stat system call is
rather common it is impossible to "fix" all userspace.

This patch reverts the original behavior, which is to not trigger on
stat(2) and other symlink following syscalls.

[ It's not really clear what the right behavior is.  Apparently Solaris
  does the "automount on stat, leave alone on lstat".  And some programs
  can get unhappy when "stat+open+fstat" ends up giving a different
  result from the fstat than from the initial stat.

  But the change in 2.6.38 resulted in problems for some people, so
  we're going back to old behavior.  Maybe we can re-visit this
  discussion at some future date  - Linus ]
Reported-by: NLeonardo Chiquitto <leonardo.lists@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Acked-by: NIan Kent <raven@themaw.net>
Cc: David Howells <dhowells@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0ec26fd0
  15. 06 9月, 2011 5 次提交
  17. 01 9月, 2011 2 次提交
    • C
      xfs: fix ->write_inode return values · 58d84c4e
      由 Christoph Hellwig 提交于 
      Currently we always redirty an inode that was attempted to be written out
synchronously but has been cleaned by an AIL pushed internall, which is
rather bogus.  Fix that by doing the i_update_core check early on and
return 0 for it.  Also include async calls for it, as doing any work for
those is just as pointless.  While we're at it also fix the sign for the
EIO return in case of a filesystem shutdown, and fix the completely
non-sensical locking around xfs_log_inode.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>
(cherry picked from commit 297db93bb74cf687510313eb235a7aec14d67e97)
Signed-off-by: NAlex Elder <aelder@sgi.com>
      58d84c4e
    • C
      xfs: fix xfs_mark_inode_dirty during umount · 866e4ed7
      由 Christoph Hellwig 提交于 
      During umount we do not add a dirty inode to the lru and wait for it to
become clean first, but force writeback of data and metadata with
I_WILL_FREE set.  Currently there is no way for XFS to detect that the
inode has been redirtied for metadata operations, as we skip the
mark_inode_dirty call during teardown.  Fix this by setting i_update_core
nanually in that case, so that the inode gets flushed during inode reclaim.

Alternatively we could enable calling mark_inode_dirty for inodes in
I_WILL_FREE state, and let the VFS dirty tracking handle this.  I decided
against this as we will get better I/O patterns from reclaim compared to
the synchronous writeout in write_inode_now, and always marking the inode
dirty in some way from xfs_mark_inode_dirty is a better safetly net in
either case.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>
(cherry picked from commit da6742a5a4cc844a9982fdd936ddb537c0747856)
Signed-off-by: NAlex Elder <aelder@sgi.com>
      866e4ed7
  19. 31 8月, 2011 1 次提交
    • J
      ext4: remove i_mutex lock in ext4_evict_inode to fix lockdep complaining · 8c0bec21
      由 Jiaying Zhang 提交于 
      The i_mutex lock and flush_completed_IO() added by commit 2581fdc8
in ext4_evict_inode() causes lockdep complaining about potential
deadlock in several places.  In most/all of these LOCKDEP complaints
it looks like it's a false positive, since many of the potential
circular locking cases can't take place by the time the
ext4_evict_inode() is called; but since at the very least it may mask
real problems, we need to address this.

This change removes the flush_completed_IO() and i_mutex lock in
ext4_evict_inode().  Instead, we take a different approach to resolve
the software lockup that commit 2581fdc8 intends to fix.  Rather
than having ext4-dio-unwritten thread wait for grabing the i_mutex
lock of an inode, we use mutex_trylock() instead, and simply requeue
the work item if we fail to grab the inode's i_mutex lock.

This should speed up work queue processing in general and also
prevents the following deadlock scenario: During page fault,
shrink_icache_memory is called that in turn evicts another inode B.
Inode B has some pending io_end work so it calls ext4_ioend_wait()
that waits for inode B's i_ioend_count to become zero.  However, inode
B's ioend work was queued behind some of inode A's ioend work on the
same cpu's ext4-dio-unwritten workqueue.  As the ext4-dio-unwritten
thread on that cpu is processing inode A's ioend work, it tries to
grab inode A's i_mutex lock.  Since the i_mutex lock of inode A is
still hold before the page fault happened, we enter a deadlock.
Signed-off-by: NJiaying Zhang <jiayingz@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
      8c0bec21
  21. 27 8月, 2011 1 次提交
  23. 26 8月, 2011 1 次提交
    • J
      lockdep: Add helper function for dir vs file i_mutex annotation · e096d0c7
      由 Josh Boyer 提交于 
      Purely in-memory filesystems do not use the inode hash as the dcache
tells us if an entry already exists.  As a result, they do not call
unlock_new_inode, and thus directory inodes do not get put into a
different lockdep class for i_sem.

We need the different lockdep classes, because the locking order for
i_mutex is different for directory inodes and regular inodes.  Directory
inodes can do "readdir()", which takes i_mutex *before* possibly taking
mm->mmap_sem (due to a page fault while copying the directory entry to
user space).

In contrast, regular inodes can be mmap'ed, which takes mm->mmap_sem
before accessing i_mutex.

The two cases can never happen for the same inode, so no real deadlock
can occur, but without the different lockdep classes, lockdep cannot
understand that.  As a result, if CONFIG_DEBUG_LOCK_ALLOC is set, this
can lead to false positives from lockdep like below:

    find/645 is trying to acquire lock:
     (&mm->mmap_sem){++++++}, at: [<ffffffff81109514>] might_fault+0x5c/0xac

    but task is already holding lock:
     (&sb->s_type->i_mutex_key#15){+.+.+.}, at: [<ffffffff81149f34>]
    vfs_readdir+0x5b/0xb4

    which lock already depends on the new lock.

    the existing dependency chain (in reverse order) is:

    -> #1 (&sb->s_type->i_mutex_key#15){+.+.+.}:
          [<ffffffff8108ac26>] lock_acquire+0xbf/0x103
          [<ffffffff814db822>] __mutex_lock_common+0x4c/0x361
          [<ffffffff814dbc46>] mutex_lock_nested+0x40/0x45
          [<ffffffff811daa87>] hugetlbfs_file_mmap+0x82/0x110
          [<ffffffff81111557>] mmap_region+0x258/0x432
          [<ffffffff811119dd>] do_mmap_pgoff+0x2ac/0x306
          [<ffffffff81111b4f>] sys_mmap_pgoff+0x118/0x16a
          [<ffffffff8100c858>] sys_mmap+0x22/0x24
          [<ffffffff814e3ec2>] system_call_fastpath+0x16/0x1b

    -> #0 (&mm->mmap_sem){++++++}:
          [<ffffffff8108a4bc>] __lock_acquire+0xa1a/0xcf7
          [<ffffffff8108ac26>] lock_acquire+0xbf/0x103
          [<ffffffff81109541>] might_fault+0x89/0xac
          [<ffffffff81149cff>] filldir+0x6f/0xc7
          [<ffffffff811586ea>] dcache_readdir+0x67/0x205
          [<ffffffff81149f54>] vfs_readdir+0x7b/0xb4
          [<ffffffff8114a073>] sys_getdents+0x7e/0xd1
          [<ffffffff814e3ec2>] system_call_fastpath+0x16/0x1b

This patch moves the directory vs file lockdep annotation into a helper
function that can be called by in-memory filesystems and has hugetlbfs
call it.
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e096d0c7
  25. 25 8月, 2011 1 次提交
  27. 24 8月, 2011 1 次提交
  29. 23 8月, 2011 2 次提交
  31. 21 8月, 2011 1 次提交