In commit e3c4ff6d ("EDAC: Remove EDAC_MM_EDAC") CONFIG_EDAC grew
a dependency on CONFIG_RAS. Some of our defconfigs don't have the
latter, which means we lose CONFIG_EDAC, so add CONFIG_RAS to fix
that.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Since commit cb74ed27 ("audit: always enable syscall auditing when
supported and audit is enabled") we no longer need to set
CONFIG_AUDITSYSCALL in our defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In commit bf4981a0 ("powerpc: Remove the celleb support") we
dropped the celleb support, which made these symbols unselectable
because we no longer select HAS_TX99_SERIAL. So drop them from the
defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

xxxx

In commit 577ec789 ("powerpc/cell: Drop select of MEMORY_HOTPLUG")
we removed the last traces of any dependency between
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In commit 43a1dd9b ("powerpc/powernv: Add driver for operator
panel on FSP machines") we added CONFIG_POWERNV_OP_PANEL=m to the
powernv defconfig, but it's default m so that's no necessary.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In commit a311e738 ("powerpc/powernv: Make PCI non-optional") we
made PCI (and therefore PCI_MSI) non-optional on powernv, so it
doesn't need to be in the defconfig anymore.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In commit 40e27565 ("powerpc/powernv: Always enable SMP when
building powernv") and 270e2dc9 ("powerpc/pseries: Always enable
SMP when building pseries") we forced CONFIG_SMP on for some configs.
Therefore we don't need to set it in those configs anymore.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In commit 6b0b7551 ("perf/core: Rename CONFIG_[UK]PROBE_EVENT to
CONFIG_[UK]PROBE_EVENTS") it was renamed to CONFIG_UPROBE_EVENTS.

Additionally it's default y, and we have the prerequisites enabled, so
we don't need it in our defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In commit 9654f95a ("powerpc: Enable NUMA balancing in
pseries[_le]_defconfig") we added CONFIG_NUMA_BALANCING_DEFAULT_ENABLED
to our defconfigs. But it's already enabled by default, so drop it.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Since commit eedf265a ("devpts: Make each mount of devpts an
independent filesystem.") we no longer need to set
CONFIG_DEVPTS_MULTIPLE_INSTANCES in our defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Since commit 00b9cfa3 ("mac80111: Add GCMP and GCMP-256 ciphers")
we no longer need to set CONFIG_CRYPTO_GCM in our defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Since commit 3491244c ("crypto: echainiv - Set Kconfig default to
m") we no longer need to set CONFIG_CRYPTO_NULL in our defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Since commit 00b9cfa3 ("mac80111: Add GCMP and GCMP-256 ciphers")
we no longer need to set CONFIG_CRYPTO_NULL in our defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Since commit 826775bb ("crypto: drbg - Add select on sha256") we
no longer need to set CONFIG_CRYPTO_SHA256 in our defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Since commit 12cb3a1c ("crypto: xts - Add ECB dependency") we no
longer need to set CONFIG_CRYPTO_ECB in our defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Since commit 401e4238 ("crypto: rng - Make DRBG the default RNG")
we no longer need to set CONFIG_CRYPTO_HMAC in our defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Since commit ccf5c442 ("crypto: vmx - Convert to CPU feature based
module autoloading") we no longer need to set
CONFIG_CRYPTO_DEV_VMX_ENCRYPT in our defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In commit a85406af ("netfilter: conntrack: built-in support for
SCTP"), NF_CT_PROTO_SCTP switched from tristate to bool and became
default y. Similarly in commit 9b91c96c ("netfilter: conntrack:
built-in support for UDPlite"), NF_CT_PROTO_UDPLITE switched from
tristate to bool and became default y.

We had a few configs which set them to =m, which is no longer valid.
We don't need to change them to =y because both symbols are default y
and are enabled automatically based on the other symbols in the
affected defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In commit a5e4bd99 ("of_mdio: select fixed phy support
unconditionally"), CONFIG_OF_MDIO began selecting CONFIG_FIXED_PHY.

That means we no longer need to set it some of our defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In commit 96151825 ("rcu: Enable RCU tracepoints by default to aid
in debugging"), CONFIG_RCU_TRACE was made default y (if CONFIG_TREE_RCU=y,
which it is for some of our configs).

That in turn causes CONFIG_TREE_RCU_TRACE to be enabled, which selects
CONFIG_DEBUG_FS. The end result is that CONFIG_DEBUG_FS is forced on,
meaning we don't have to enable it in some of our configs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Since commit e334cd69 ("Move CONFIG_DEVKMEM default to n") we no
longer need to set CONFIG_DEVKMEM in our defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Since commit f76be617 ("Make CONFIG_FHANDLE default y") we no
longer need to set CONFIG_FHANDLE in our defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In commit 73d8ef76 ("Input: mousedev - stop offering PS/2 to userspace by
default") (Jan 2017), CONFIG_INPUT_MOUSEDEV was switched from default y to
default n, with the explanation:

  Evdev interface has been available for many years and by now everyone
  is switched to using it, so let's stop offering /dev/input/mouseN
  and /dev/psaux by default.

We had a number of configs which had it enabled, but going by the above
explanation probably don't need it enabled anymore.

So drop the last remnants of it from our defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Since commit 401e4238 ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Update defconfigs for symbols that have moved around, without their
value changing.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This is purely cosmetic, but does look nicer IMHO:

Before:

  task: c000000001453400 task.stack: c000000001c6c000
  NIP: c000000000a0fbfc LR: c000000000a0fbf4 CTR: c000000000ba6220
  REGS: c0000001fffef820 TRAP: 0300   Not tainted  (4.13.0-rc6-gcc-6.3.1-00234-g423af27f7d81)
  MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 88088242  XER: 00000000
  CFAR: c0000000000b3488 DAR: 0000000000000000 DSISR: 42000000 SOFTE: 0

After:
  task: c000000001453400 task.stack: c000000001c6c000
  NIP:  c000000000a0fbfc LR: c000000000a0fbf4 CTR: c000000000ba6220
  REGS: c0000001fffef820 TRAP: 0300   Not tainted  (4.13.0-rc6-gcc-6.3.1-00234-g423af27f7d81-dirty)
  MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 88088242  XER: 00000000
  CFAR: c0000000000b34a4 DAR: 0000000000000000 DSISR: 42000000 SOFTE: 0
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Somehow we missed this when the pr_cont() changes went in. Fix CR/XER
to go on the same line as MSR, as they have historically, eg:

  MSR: 8000000000009032 <SF,EE,ME,IR,DR,RI>  CR: 4804408a  XER: 20000000
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Just because it looks less gross.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Although the MSR tells you what endian you're in it's possible that
isn't the same endian the kernel was built for, and if that happens
you're usually having a very bad day. So print a marker to make
it 100% clear which endian the kernel was built for.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When we oops we print a few markers for significant config options
such as PREEMPT, SMP etc. Currently these appear on separate lines
because we're not using pr_cont() properly. Fix it.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When building a random powerpc kernel I hit this build error:

  arch/powerpc/platforms/powernv/opal-imc.c:130:13: error : assignment
  discards « const » qualifier from pointer target type
  [-Werror=discarded-qualifiers]
     l_cpumask = cpumask_of_node(nid);
             ^

This happens because when CONFIG_NUMA=n cpumask_of_node() returns a
const pointer.

This patch simply adds const to l_cpumask to fix this issue.
Signed-off-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: NMadhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Flesh out change log]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

CONFIG_PPC_MEMTRACE must be set to use this feature. This can only be
used on powernv platforms.
Signed-off-by: NRashmica Gupta <rashmica.g@gmail.com>
[mpe: Update dates and kernel versions, mention size is in bytes]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The hardware trace macro feature requires access to a chunk of real
memory. This patch provides a debugfs interface to do this. By
writing an integer containing the size of memory to be unplugged into
/sys/kernel/debug/powerpc/memtrace/enable, the code will attempt to
remove that much memory from the end of each NUMA node.

This patch also adds additional debugsfs files for each node that
allows the tracer to interact with the removed memory, as well as
a trace file that allows userspace to read the generated trace.

Note that this patch does not invoke the hardware trace macro, it
only allows memory to be removed during runtime for the trace macro
to utilise.
Signed-off-by: NRashmica Gupta <rashmica.g@gmail.com>
[mpe: Minor formatting etc fixups]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This helper is used to detect if a uprobe'd function has returned
through a setjmp/longjmp, rather than branching to the LR that was
updated previously by us. This fixes a SIGSEGV that gets generated when
programs use setjmp/longjmp with uretprobes.

We use the arm64 model (arch/arm64/kernel/probes/uprobes.c:
arch_uretprobe_is_alive()) for detecting when stack frames have been
removed from under us.

Reference:
https://marc.info/?l=linux-kernel&m=143748610330073
commit 7b868e48 ("uprobes/x86: Reimplement arch_uretprobe_is_alive()")
commit db087ef6 ("uprobes/x86: Make arch_uretprobe_is_alive(RP_CHECK_CALL) more
clever")

Tested with the test program from:
https://sourceware.org/git/gitweb.cgi?p=systemtap.git;a=blob;f=testsuite/systemtap.base/bz5274.c;hb=HEAD

And this script:
    $ cat test.sh
    #!/bin/bash

    perf probe -x ./bz5274 -a bz5274_main_return=main%return
    perf probe -x ./bz5274 -a bz5274_funca_return=funca%return
    perf probe -x ./bz5274 -a bz5274_funcb_return=funcb%return
    perf probe -x ./bz5274 -a bz5274_funcc_return=funcc%return
    perf probe -x ./bz5274 -a bz5274_funcd_return=funcd%return

    perf record -e 'probe_bz5274:*' -aR ./bz5274
Reported-by: NGustavo Luiz Duarte <gduarte@redhat.com>
Reported-by: zsun@redhat.com
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We don't save/restore these across a trap, or with KPROBES_ON_FTRACE.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When called from xive_irq_startup(), the size of the cpumask can be
larger than nr_cpu_ids. This can result in a WARN_ON such as:

  WARNING: CPU: 10 PID: 1 at ../arch/powerpc/sysdev/xive/common.c:476 xive_find_target_in_mask+0x110/0x2f0
  ...
  NIP [c00000000008a310] xive_find_target_in_mask+0x110/0x2f0
  LR [c00000000008a2e4] xive_find_target_in_mask+0xe4/0x2f0
  Call Trace:
    xive_find_target_in_mask+0x74/0x2f0 (unreliable)
    xive_pick_irq_target.isra.1+0x200/0x230
    xive_irq_startup+0x60/0x180
    irq_startup+0x70/0xd0
    __setup_irq+0x7bc/0x880
    request_threaded_irq+0x14c/0x2c0
    request_event_sources_irqs+0x100/0x180
    __machine_initcall_pseries_init_ras_IRQ+0x104/0x134
    do_one_initcall+0x68/0x1d0
    kernel_init_freeable+0x290/0x374
    kernel_init+0x24/0x170
    ret_from_kernel_thread+0x5c/0x74

This happens because we're being called with our affinity mask set to
irq_default_affinity. That in turn was populated using
cpumask_setall(), which sets NR_CPUs worth of bits, not nr_cpu_ids
worth. Finally cpumask_weight() will return > nr_cpu_ids when passed a
mask which has > nr_cpu_ids bits set.

Fix it by limiting the value returned by cpumask_weight().
Signed-off-by: NCédric Le Goater <clg@kaod.org>
[mpe: Add change log details on actual cause]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

On modern CPUs the CTRL register is read-only except bit 63 which is
the run latch control. This means it can be updated with a mtspr
rather than mfspr/mtspr.

To accomodate older CPUs (Cell at least), where there are other bits
in the register, we still do a read/modify/write on pre 2.06 CPUs.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
[mpe: Update change log to mention 2.06 workaround]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

HVI interrupts have always used 0x500, so remove the dead branch.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

POWER9 host external interrupts use the h_virt_irq_common handler, so
use that to replay them rather than using the hardware_interrupt_common
handler. Both call do_IRQ, but using the correct handler reduces
i-cache footprint.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>