This is an all formats tuner, QAM, ATSC, DVB-T and others.
Only ATSC and QAM have been tested.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add basic support for NXP TDA8295 analog demod and TDA18271 tuner silicon.

TDA8295 + TDA8275a not yet tested.
TDA8290 + TDA18271 not yet supported.

Digital mode of TDA18271 not yet tested & needs more work.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Reviewed-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

s/driver/drives/1
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This changeset adds support for DiB7070P-based devices by adding the
dib0070-driver and putting the appropriate layouts into
dib0700_devices.c

It also includes a new firmware for the dib0700 which is necessary to
make the DiB7070-boards work and it also should fix the i2c-problems
on some boards.
Signed-off-by: NJean-Philippe Sibers <jpsibers@dibcom.fr>
Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch adds support for the Samsung S5H1409 demodulator, also known
as the Conexant CX24227 demodulator. 8VSB mode has been tested and QAM
has been implemented based on the spec, although it's untested.

The S5H1409 / CX24227 appears on various Hauppauge boards.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This adds support for the Microtune MT2131 tuner. 8VSB mode has been 
tested but QAM support will likely require more register work. Hauppauge 
have not announced any QAM devices using the MT2131 so QAM remains 
undone.

For legal reasons, Microtune allowed us to write a GPL driver providing 
we did not document in significant detail any of the registers. This 
explains the lack of comments or defined on register names.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add initial support for Dual-DVB-T stick based on DiB7700 and MT2266

- Microtune MT2266 driver.
- Preliminary support for these dual tuner devices :
  - Pinnacle Dual DVB-T diversity
  - Terratec Cinergy DT USB XS diversity
  - Hauppauge Nova TD USB
Signed-off-by: NOlivier DANET <odanet@caramail.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add support for the frontend TDA10023 and add cards that need the
tda10023.
Signed-off-by: NHartmut Birr <e9hack@googlemail.com>
Signed-off-by: NGeorg Acher <acher@in.tum.de>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The code of the dvb-pll driver and the lgh06xf driver is nearly
identical.  The main difference is that the lgh06xf driver would set the
AGC TOP value on every tune call.  The dvb-pll driver now has the ability
to set the AGC TOP when the front-end device is opened, which is a better
way to go about it.  By using this ability of dvb-pll, the lgh06xf driver
is made unnecessary.

There is one other difference.  dvb-pll will probe for the presence of an
I2C pll chip by doing a one byte read, the lgh06xf driver did not do
this.  In some devices the PLL is not reachable over I2C at the timer the
tuner is attached.  Some more initialization, such as firmware loading,
must take place first.  None of the devices using a LG-H06xF should have
this problem.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Acked-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

A number of drivers selected DVB_PLL when they did not need it, and some
that did need it did not select it.

The DVB_PLL option is given a name and help text, so that it will show up
in the config menu.  DVB_PLL support can be turned on if an out-of-tree
driver needs it.

The standard dvb fe customization support is added to dvb-pll.h.  Since
all modules which select DVB_PLL do so unconditionally, it is not
possible to turn dvb-pll off when an enabled module selects it, unlike
most of the other frontend/tuner drivers.  This is because the users of
dvb-pll have static references to dvb-pll symbols other than the attach
function.  If these references are removed, then dvb-pll will be
disablable as the other frontend/tuner drivers are.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The patch moves the tda827x dvb tuning code to a separate module
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

QT1010:
- old qt1010-code totally rewritten and put in own kernel module
- same enhancements as my earlier QT1010 125kHz patch
- tuner initialization
- register 1f calculation
- register 20 calculation
- register 25 calculation

m920x: (MSI Megasky)
- use new QT1010 module instead of old code
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch creates a new atsc tuner module for the LG TDVS-H06xF ATSC tuners,
called lgh06xf.  The purpose of this change is to reduce some duplicated
code, and to allow the lgh06xf tuner code to take advantage of dvb_attach().
As a side effect, the dependency of dvb-bt8xx on dvb-pll has been removed,
since the lgh06xf module itself will use dvb-pll, while remaining optional
for the dvb-bt8xx driver through the use of DVB_FE_CUSTOMISE
Acked-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch contains support for the DiB7000PC-driver.
Signed-off-by: NFrancois KANOUNNIKOFF <fkanounnikoff@dibcom.fr>
Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

First working version of the dib7000m-driver. 
This commit also makes the Hauppauge NOVA-T Stick working.
Signed-off-by: NFrancois Kanounnikoff <fkanounnikoff@dibcom.fr>
Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Let the MT2060 be customized like most of the other DVB PLLs/front-ends. 
Also, add a missing dependency on I2C.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This driver was originally in budget-av.c, however I have extracted it into
a seperate file to permit reuse.
I also reworked the code to make it maintainable. I then examined the KNC1
windows drivers and rewrote the code in order to configure the PLL as they
do. This solves a lot of reported tuning problems.
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Some minor code cleanups and added the MT2060 to new v4l-dvb-build-system, preliminarily under dvb/frontends.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This was breaking the build if i2c was not previously set
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

TDA10086 is a new DVB-S demodulator
TDA826x is a DVB-S Silicon Tuner
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Several DVB modules depends on I2C
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Driver for the ISL6421 LNB chip
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Convert lnbp21.h into a linux kernel module.
Fix up previous users to use it.
Convert dvb-ttusb-budget to use it.
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

It's "Terrestrial"
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Added firmware download comments to or51211 and or51132 Kconfig help text.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Corrected typo for NxtWave NXT200X
- Added "Oren" manufacturer name to menu items for OR51132 and OR51211
- Removed "(pcHDTV HDx000 card)" from Oren frontends menu item names,
  This isn't necessary, as these frontends are selected by the card drivers,
  build configuration (DVB_BT8XX and VIDEO_CX88_DVB).
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add support for the FE6600 tuner used on the DVB-T Hybrid board.
Add support for the Zarlink ZL10353 DVB-T demodulator, which supersedes the
MT352, used on the DViCO FusionHDTV DVB-T Hybrid and later model Plus boards.
Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch contains the following possible cleanups:
- update the Kconfig help to mention the VP310
- merge vp310_attach and mt312_attach into a new vp310_mt312_attach
  to remove some code duplication
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch contains the following possible cleanups:
- update the Kconfig help to mention the VP310
- merge vp310_attach and mt312_attach into a new vp310_mt312_attach
  to remove some code duplication
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The at76c651 and tda80xx frontends are currently completely unused, IOW
their only effect is making the kernel larger for people accitentially
enabling them.

The current in-kernel drivers differ from the drivers at cvs.tuxbox.org,
and re-adding them when parts of the dbox2 project get merged should be
trivial.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The at76c651 and tda80xx frontends are currently completely unused, IOW
their only effect is making the kernel larger for people accitentially
enabling them.

The current in-kernel drivers differ from the drivers at cvs.tuxbox.org,
and re-adding them when parts of the dbox2 project get merged should be
trivial.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Kill nxt2002 module in favor of nxt200x.
- Repair broken nxt2002 support in the nxt200x module.
- Make the flexcop driver use nxt200x instead of the nxt2002 module for the
  Air2PC 2nd generation PCI card.
- Remove the nxt2002 module from cvs and kernel build.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Kill nxt2002 module in favor of nxt200x.
- Repair broken nxt2002 support in the nxt200x module.
- Make the flexcop driver use nxt200x instead of the nxt2002 module for the
  Air2PC 2nd generation PCI card.
- Remove the nxt2002 module from cvs and kernel build.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- add firmware instructions for nxt2002 and nxt2004
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- make the firmware dir documentation and comments consistent in the v4l-dvb tree.
Signed-off-by: NVille Skyttä <ville.skytta@iki.fi>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- minor whitespace cleanups
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Added demodulator driver for Nova-S-Plus and Nova-SE2 DVB-S support.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

* nxt200x.c, nxt200x.h
- New frontend module that supports both NXT2002 and NXT2004.
  So far, only tested on NXT2004.  After testing on NXT2002, we should
  deprecate the nxt2002 module, and implement this one instead on the
  applicable cards.

* get_dvb_firmware:
- Added support for the NXT2004 firmware. This firmware works with both
  the ATI HDTV Wonder and the AVerTVHD MCE a180.
  This was originally written by Jean-Francois Thibert

* dvb-pll.c
- Fixed minimum frequency for tuv1236d. It seems that the data sheets
  are wrong.
Signed-off-by: NKirk Lapray <kirk.lapray@gmail.com>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Two trivial text changes in Kconfig and lgdt330x.c
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>