- 06 12月, 2006 8 次提交
-
-
由 Zhu Yi 提交于
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
The ipw2200 BSS firmware passes on the TSF information within ipw_rx_frame, but monitor firmware doesn't. I add back the IEEE80211_RADIOTAP_TSFT flags so that we can get the MAC timestamp if we use the rtap interface. We will see the MAC timestamp equals to zero if we capture the packets with a monitor mode interface. But this is the expected behaviour. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yan Burman 提交于
Replace kmalloc+memset with kcalloc Signed-off-by: NYan Burman <burman.yan@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yan Burman 提交于
Replace kmalloc+memset with kzalloc Signed-off-by: NYan Burman <burman.yan@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yan Burman 提交于
Replace kmalloc+memset with kzalloc Signed-off-by: NYan Burman <burman.yan@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ulrich Kunitz 提交于
Support for multicast adresses is implemented by supporting the set_multicast_list() function of the network device. Address filtering is supported by a group hash table in the device. This is based on earlier work by Benoit Papillaut. Fixes multicast packet reception and ipv6 connectivity: http://bugzilla.kernel.org/show_bug.cgi?id=7424 http://bugzilla.kernel.org/show_bug.cgi?id=7425Signed-off-by: NUlrich Kunitz <kune@deine-taler.de> Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel Drake 提交于
This is needed for NetworkManager users to connect to WPA networks. Pointed out by Matthew Campbell. Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel Drake 提交于
e.g. usb 1-7: rx_urb_complete() *** first fragment *** usb 1-7: rx_urb_complete() *** second fragment *** drivers/net/wireless/zd1211rw/zd_mac.c:1063 ASSERT (((current_thread_info()->preempt_count) & (((1UL << (12))-1) << ((0 + 8) + 8)))) VIOLATED! [<f0299448>] zd_mac_rx+0x3e7/0x47a [zd1211rw] [<f029badc>] rx_urb_complete+0x22d/0x24a [zd1211rw] [<b028a22f>] urb_destroy+0x0/0x5 [<b01f0930>] kref_put+0x65/0x72 [<b0288cdf>] usb_hcd_giveback_urb+0x28/0x57 [<b02950c4>] qh_completions+0x296/0x2f6 [<b0294b21>] ehci_urb_done+0x70/0x7a [<b0294ea1>] qh_completions+0x73/0x2f6 [<b02951bc>] ehci_work+0x98/0x538 Remove the bogus assertion, and use dev_kfree_skb_any as pointed out by Ulrich Kunitz. Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 12月, 2006 1 次提交
-
-
由 Al Viro 提交于
ip_summed changes last summer had missed that one. As the result, we have ip_summed interpreted as CHECKSUM_PARTIAL now. IOW, ->csum is interpreted as offset of checksum in the packet. net/core/* will both read and modify the value as that offset, with obvious reasons. At the very least it's a remote memory corruptor. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 12月, 2006 6 次提交
-
-
由 Benjamin Herrenschmidt 提交于
We use the powerpc specific low level MMIO accessor variants instead of readl() or readl_be() because we know spidernet is not a real PCI device and we can thus avoid the performance hit caused by the PCI workarounds. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
Remove the now unused "liobn" field in ibmveth which also avoids having insider knowledge of the iommu table in that driver. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NSantiago Leon <santil@us.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Benjamin Herrenschmidt 提交于
This patch makes the EMAC driver use the new DCR access methods. It doesn't yet uses dcr_map() and thus still only work with real DCRs. This will be fixed in a later patch Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jurij Smakov 提交于
The following patch fixes the failure of sunhme drivers on x86 hosts due to missing pci_enable_device() and pci_set_master() calls, lost during code refactoring. It has been filed as bugzilla bug #7502 [0] and Debian bug #397460 [1]. [0] http://bugzilla.kernel.org/show_bug.cgi?id=7502 [1] http://bugs.debian.org/397460Signed-off-by: NJurij Smakov <jurij@wooyd.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2006 23 次提交
-
-
由 Al Viro 提交于
... into anonymous union of __wsum and __u32 (csum and csum_offset resp.) Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Update version to 1.5.1. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add PCI ID and detection for 5709 copper and SerDes chips. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add basic support to initialize the 5709 chip. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Re-organize the firmware handling code and declarations a bit to make the code more compact. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Change a long udelay() in bnx2_setup_copper_phy() to msleep(). Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add code to parallel detect 1Gbps and 2.5Gbps link speeds. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Separate the 5706S SerDes handling code in bnx2_timer() and put it in a new function. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
1. Add support for 2.5Gbps forced speed setting. 2. Remove a long udelay() loop and change to msleep(). 3. Other misc. SerDes fixes. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
This fixes the problem of not receiving packets in the Xen bridging environment. The Xen script sets the device's MAC address to FE:FF:FF:FF:FF:FF and puts the device in promiscuous mode. The firmware had problem receiving all packets in this configuration. New firmware and setting the PROM_VLAN bit when in promiscuous mode will fix this problem. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Spotted by Ian McDonald, tentatively fixed by Gerrit Renker: http://www.mail-archive.com/dccp%40vger.kernel.org/msg00599.html Rewritten not to unroll sk_receive_skb, in the common case, i.e. no lock debugging, its optimized away. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The beast had a long and not very happy history. At one point, a friend (netdump) had asked that he open up a little. Well, the friend was long gone now, and the beast had this dangling piece hanging (netpoll_queue). It wasn't hard to stitch the netpoll_queue back in where it belonged and make everything tidy. Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Stephen Hemminger 提交于
The beast was not always healthy. When it was sick, it tended to be laconic and not tell anyone the real problem. A few small changes had it telling the world about its problems, if they really wanted to hear. Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Adrian Bunk 提交于
This patch contains the scheduled removal of the frame diverter. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 12月, 2006 2 次提交
-
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Amit S. Kale 提交于
Signed-off-by: NAmit S. Kale <amitkale@netxen.com> netxen_nic.h | 38 ++++++++------------------------------ netxen_nic_ethtool.c | 5 ++--- netxen_nic_hw.c | 12 +++++------- netxen_nic_main.c | 8 +++----- 4 files changed, 18 insertions(+), 45 deletions(-) Signed-off-by: NJeff Garzik <jeff@garzik.org>
-