- 02 4月, 2013 14 次提交
-
-
由 Jon Hunter 提交于
The GPMC has various different configuration options such as bus-width, synchronous or asychronous mode selection, burst mode options etc. Currently, there is no common function for configuring these options and various devices set these options by either programming the GPMC CONFIG1 register directly or by calling gpmc_cs_configure() to set some of the options. Add a new function for configuring all of the GPMC options. Having a common function for configuring this options will simplify code and ease the migration to device-tree. Also add a new capability flag to detect devices that support the address-address-data multiplexing mode. Signed-off-by: NJon Hunter <jon-hunter@ti.com> Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
-
由 Jon Hunter 提交于
The GPMC has various different configuration options such as bus-width, synchronous or asychronous mode selection, burst mode options etc. Currently, there is no central structure for storing all these options when configuring the GPMC for a given device. Some of the options are stored in the GPMC timing structure and some are directly programmed into the GPMC configuration register. Add a new structure to store these options and convert code to use this structure. Adding this structure will allow us to create a common function for configuring these options. Signed-off-by: NJon Hunter <jon-hunter@ti.com> Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
-
由 Jon Hunter 提交于
The GPMC has wait-pin signals that can be assigned to a chip-select to monitor the ready signal of an external device. Add a variable to indicate the total number of wait-pins for a given device. This will allow us to detect if the wait-pin being selected is valid or not. When booting with device-tree read the number of wait-pins from the device-tree blob. When device-tree is not used set the number of wait-pins to 4 which is valid for OMAP2-5 devices. Newer devices that have less wait-pins (such as AM335x) only support booting with device-tree and so hard-coding the wait-pin number when not using device-tree is fine. Signed-off-by: NJon Hunter <jon-hunter@ti.com> Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
-
由 Jon Hunter 提交于
The OMAP2+ code that configures the GPMC for ONENAND devices is copying structures between functions unnecessarily. Avoid this by passing pointers instead and simplify the code. A pointer to structure "omap_onenand_platform_data" is passed to the function omap2_onenand_calc_sync_timings(), but only the flags member of the structure is used. Simplify the code by only passing the flags member and not the entire structure. Signed-off-by: NJon Hunter <jon-hunter@ti.com> Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
-
由 Ezequiel Garcia 提交于
This check is done before the call to gpmc_cs_reserved() and gpmc_cs_set_reserved() and it's redundant to do it again in each function. This simplifies the code a bit. Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: NJon Hunter <jon-hunter@ti.com> Signed-off-by: NJon Hunter <jon-hunter@ti.com>
-
由 Ezequiel Garcia 提交于
Since the condition is not an error but a warning, replace printk KERN_ERR with dev_warn. Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: NJon Hunter <jon-hunter@ti.com> Signed-off-by: NJon Hunter <jon-hunter@ti.com>
-
由 Ezequiel Garcia 提交于
Do this becasue dev_err() is preferred over pr_err() and because it will match gpmc-nand, thus the code shows looks more consistent. Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: NJon Hunter <jon-hunter@ti.com> Signed-off-by: NJon Hunter <jon-hunter@ti.com>
-
由 Ezequiel Garcia 提交于
If CS request fails the current error message is rather unhelpful. Fix it by printing the failing chip select and the error code. Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: NJon Hunter <jon-hunter@ti.com> Signed-off-by: NJon Hunter <jon-hunter@ti.com>
-
由 Ezequiel Garcia 提交于
If CS request fails the current error message is rather unhelpful. Fix it by printing the failing chip select and the error code. Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: NJon Hunter <jon-hunter@ti.com> Signed-off-by: NJon Hunter <jon-hunter@ti.com>
-
由 Ezequiel Garcia 提交于
Currently gpmc_cs_reserved() return value is somewhat inconsistent, returning a negative value on an error condition, a positive value if the chip select is reserved and zero if it's available. Fix this by returning a boolean value as the function name suggests: * true if the chip select is reserved, * false if it's available Suggested-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: NJon Hunter <jon-hunter@ti.com> Signed-off-by: NJon Hunter <jon-hunter@ti.com>
-
由 Ezequiel Garcia 提交于
This function is not used anywhere, so it's safe to remove it. This means less code to maintain. Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: NJon Hunter <jon-hunter@ti.com> Signed-off-by: NJon Hunter <jon-hunter@ti.com>
-
由 Ezequiel Garcia 提交于
This patch marks a bunch of functions that are local to gpmc.c file only as static. Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: NJon Hunter <jon-hunter@ti.com> Signed-off-by: NJon Hunter <jon-hunter@ti.com>
-
由 Mark Jackson 提交于
When setting the GPMC device type, make sure any previous bits are cleared down, before applying the new setting. For OMAP4+ devices MUXADDDATA is a 2-bit field (bits 9:8) where as for OMAP2/3 devices it was only a one bit field (bit 9). For OMAP2/3 devices bit 8 is reserved and the OMAP documentation says to write a 0 to this bit. So clearing bit 8 on OMAP2/3 devices should not be a problem. Hence update the code to handle both bits 8 and 9 for all devices. Signed-off-by: NMark Jackson <mpfj@newflow.co.uk> [jon-hunter@ti.com: updated changelog] Signed-off-by: NJon Hunter <jon-hunter@ti.com>
-
由 Jon Hunter 提交于
Conflicts: arch/arm/plat-omap/dmtimer.c
-
- 14 3月, 2013 1 次提交
-
-
由 Russell King 提交于
Consistently check errors using the usual method used in the kernel for much of its history. For instance: int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) { int div; div = gpmc_calc_divider(t->sync_clk); if (div < 0) return div; static int gpmc_set_async_mode(int cs, struct gpmc_timings *t) { ... return gpmc_cs_set_timings(cs, t); ..... ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t); if (IS_ERR_VALUE(ret)) return ret; So, gpmc_cs_set_timings() thinks any negative return value is an error, but where we check that in higher levels, only a limited range are errors... There is only _one_ use of IS_ERR_VALUE() in arch/arm which is really appropriate, and that is in arch/arm/include/asm/syscall.h: static inline long syscall_get_error(struct task_struct *task, struct pt_regs *regs) { unsigned long error = regs->ARM_r0; return IS_ERR_VALUE(error) ? error : 0; } because this function really does have to differentiate between error return values and addresses which look like negative numbers (eg, from mmap()). So, here's a patch to remove them from OMAP, except for the above. Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 05 3月, 2013 2 次提交
-
-
由 Jon Hunter 提交于
Commit 6797b4fe (ARM: OMAP2+: Prevent potential crash if GPMC probe fails) added code to ensure that GPMC chip-selects could not be requested until the device probe was successful. The chip-selects should have been unreserved at the end of the probe function, but the code to unreserve them appears to have ended up in the gpmc_calc_timings() function and hence, this is causing problems requesting chip-selects. Fix this merge error by unreserving the chip-selects at the end of the probe, but before we call the gpmc child probe functions (for device-tree) which request a chip-select. Signed-off-by: NJon Hunter <jon-hunter@ti.com> Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: NPhilip Avinash <avinashphilip@ti.com> Tested-by: NGrazvydas Ignotas <notasas@gmail.com> [tony@atomide.com: updated description to add breaking commit id] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Commit 16559ae4 (kgdb: remove #include <linux/serial_8250.h> from kgdb.h) had a side effect of breaking omap1_defconfig build as some headers were included indirectly: arch/arm/mach-omap1/board-h2.c:249: error: ‘INT_KEYBOARD’ undeclared here (not in a function) ... This worked earlier as linux/serial_8250.h included linux/serial_core.h, via linux/serial_8250.h from linux/kgdb.h. Fix this by including the necessary headers directly. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 04 3月, 2013 14 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.infradead.org/users/dhowells/linux-headers由 Linus Torvalds 提交于
Pull fbdev UAPI disintegration from David Howells: "You'll be glad to here that the end is nigh for the UAPI patches. Only the fbdev/framebuffer piece remains now that the SCSI stuff has gone in. Here are the UAPI disintegration bits for the fbdev drivers. It appears that Florian hasn't had time to deal with my patch, but back in December he did say he didn't mind if I pushed it forward." Yay. No more uapi movement. And hopefully no more big header file cleanups coming up either, it just tends to be very painful. * tag 'disintegrate-fbdev-20121220' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate include/video
-
由 Linus Torvalds 提交于
Merge tag 'stable/for-linus-3.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - Update the Xen ACPI memory and CPU hotplug locking mechanism. - Fix PAT issues wherein various applications would not start - Fix handling of multiple MSI as AHCI now does it. - Fix ARM compile failures. * tag 'stable/for-linus-3.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xenbus: fix compile failure on ARM with Xen enabled xen/pci: We don't do multiple MSI's. xen/pat: Disable PAT using pat_enabled value. xen/acpi: xen cpu hotplug minor updates xen/acpi: xen memory hotplug minor updates
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull more VFS bits from Al Viro: "Unfortunately, it looks like xattr series will have to wait until the next cycle ;-/ This pile contains 9p cleanups and fixes (races in v9fs_fid_add() etc), fixup for nommu breakage in shmem.c, several cleanups and a bit more file_inode() work" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: constify path_get/path_put and fs_struct.c stuff fix nommu breakage in shmem.c cache the value of file_inode() in struct file 9p: if v9fs_fid_lookup() gets to asking server, it'd better have hashed dentry 9p: make sure ->lookup() adds fid to the right dentry 9p: untangle ->lookup() a bit 9p: double iput() in ->lookup() if d_materialise_unique() fails 9p: v9fs_fid_add() can't fail now v9fs: get rid of v9fs_dentry 9p: turn fid->dlist into hlist 9p: don't bother with private lock in ->d_fsdata; dentry->d_lock will do just fine more file_inode() open-coded instances selinux: opened file can't have NULL or negative ->f_path.dentry (In the meantime, the hlist traversal macros have changed, so this required a semantic conflict fixup for the newly hlistified fid->dlist)
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixup from Chris Mason: "Geert and James both sent this one in, sorry guys" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs/raid56: Add missing #include <linux/vmalloc.h>
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull second set of s390 patches from Martin Schwidefsky: "The main part of this merge are Heikos uaccess patches. Together with commit 09884964 ("mm: do not grow the stack vma just because of an overrun on preceding vma") the user string access is hopefully fixed for good. In addition some bug fixes and two cleanup patches." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/module: fix compile warning qdio: remove unused parameters s390/uaccess: fix kernel ds access for page table walk s390/uaccess: fix strncpy_from_user string length check input: disable i8042 PC Keyboard controller for s390 s390/dis: Fix invalid array size s390/uaccess: remove pointless access_ok() checks s390/uaccess: fix strncpy_from_user/strnlen_user zero maxlen case s390/uaccess: shorten strncpy_from_user/strnlen_user s390/dasd: fix unresponsive device after all channel paths were lost s390/mm: ignore change bit for vmemmap s390/page table dumper: add support for change-recording override bit
-
由 Linus Torvalds 提交于
Merge branch 'fixes-for-3.9-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull second round of PARISC updates from Helge Deller: "The most important fix in this branch is the switch of io_setup, io_getevents and io_submit syscalls to use the available compat syscalls when running 32bit userspace on 64bit kernel. Other than that it's mostly removal of compile warnings." * 'fixes-for-3.9-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix redefinition of SET_PERSONALITY parisc: do not install modules when installing kernel parisc: fix compile warnings triggered by atomic_sub(sizeof(),v) parisc: check return value of down_interruptible() in hp_sdc_rtc.c parisc: avoid unitialized variable warning in pa_memcpy() parisc: remove unused variable 'compat_val' parisc: switch to compat_functions of io_setup, io_getevents and io_submit parisc: select ARCH_WANT_FRAME_POINTERS
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag由 Linus Torvalds 提交于
Pull new ImgTec Meta architecture from James Hogan: "This adds core architecture support for Imagination's Meta processor cores, followed by some later miscellaneous arch/metag cleanups and fixes which I kept separate to ease review: - Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture - A few fixes all over, particularly for symbol prefixes - A few privilege protection fixes - Several cleanups (setup.c includes, split out a lot of metag_ksyms.c) - Fix some missing exports - Convert hugetlb to use vm_unmapped_area() - Copy device tree to non-init memory - Provide dma_get_sgtable()" * tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits) metag: Provide dma_get_sgtable() metag: prom.h: remove declaration of metag_dt_memblock_reserve() metag: copy devicetree to non-init memory metag: cleanup metag_ksyms.c includes metag: move mm/init.c exports out of metag_ksyms.c metag: move usercopy.c exports out of metag_ksyms.c metag: move setup.c exports out of metag_ksyms.c metag: move kick.c exports out of metag_ksyms.c metag: move traps.c exports out of metag_ksyms.c metag: move irq enable out of irqflags.h on SMP genksyms: fix metag symbol prefix on crc symbols metag: hugetlb: convert to vm_unmapped_area() metag: export clear_page and copy_page metag: export metag_code_cache_flush_all metag: protect more non-MMU memory regions metag: make TXPRIVEXT bits explicit metag: kernel/setup.c: sort includes perf: Enable building perf tools for Meta metag: add boot time LNKGET/LNKSET check metag: add __init to metag_cache_probe() ...
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull late ARM updates from Russell King: "Here is the late set of ARM updates for this merge window; in here is: - The ARM parts of the broadcast timer support, core parts merged through tglx's tree. This was left over from the previous merge to allow the dependency on tglx's tree to be resolved. - A fix to the VFP code which shows up on Raspberry Pi's, as well as fixing the fallout from a previous commit in this area. - A number of smaller fixes scattered throughout the ARM tree" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: ARM: Fix broken commit 0cc41e4a corrupting kernel messages ARM: fix scheduling while atomic warning in alignment handling code ARM: VFP: fix emulation of second VFP instruction ARM: 7656/1: uImage: Error out on build of multiplatform without LOADADDR ARM: 7640/1: memory: tegra_ahb_enable_smmu() depends on TEGRA_IOMMU_SMMU ARM: 7654/1: Preserve L_PTE_VALID in pte_modify() ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock ARM: 7651/1: remove unused smp_timer_broadcast #define
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc patch from Greg Kroah-Hartman: "Here is one remaining patch for 3.9-rc1. It is for the hyper-v drivers, and had to wait until some other patches went in through the x86 tree." Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> * tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: vmbus: Use the new infrastructure for delivering VMBUS interrupts
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB patch revert from Greg Kroah-Hartman: "Here is one remaining USB patch for 3.9-rc1, it reverts a 3.8 patch that has caused a lot of regressions for some VIA EHCI controllers." * tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: EHCI: revert "remove ASS/PSS polling timeout"
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog updates from Wim Van Sebroeck: "This contains: - fixes and improvements - devicetree bindings - conversion to watchdog generic framework of the following drivers: - booke_wdt - bcm47xx_wdt.c - at91sam9_wdt - Removal of old STMP3xxx driver - Addition of following new drivers: - new driver for STMP3xxx and i.MX23/28 - Retu watchdog driver" * git://www.linux-watchdog.org/linux-watchdog: (30 commits) watchdog: sp805_wdt depends on ARM watchdog: davinci_wdt: update to devm_* API watchdog: davinci_wdt: use devm managed clk get watchdog: at91rm9200: add DT support watchdog: add timeout-sec property binding watchdog: at91sam9_wdt: Convert to use the watchdog framework watchdog: omap_wdt: Add option nowayout watchdog: core: dt: add support for the timeout-sec dt property watchdog: bcm47xx_wdt.c: add hard timer watchdog: bcm47xx_wdt.c: rename wdt_time to timeout watchdog: bcm47xx_wdt.c: rename ops methods watchdog: bcm47xx_wdt.c: use platform device watchdog: bcm47xx_wdt.c: convert to watchdog core api watchdog: Convert BookE watchdog driver to watchdog infrastructure watchdog: s3c2410_wdt: Use devm_* functions watchdog: remove old STMP3xxx driver watchdog: add new driver for STMP3xxx and i.MX23/28 rtc: stmp3xxx: add wdt-accessor function watchdog: introduce retu_wdt driver watchdog: intel_scu_watchdog: fix Kconfig dependency ...
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull second set of slave-dmaengine updates from Vinod Koul: "Arnd's patch moves the dw_dmac to use generic DMA binding. I agreed to merge this late as it will avoid the conflicts between trees. The second patch from Matt adding a dma_request_slave_channel_compat API was supposed to be picked up, but somehow never got picked up. Some patches dependent on this are already in -next :(" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dw_dmac: move to generic DMA binding dmaengine: add dma_request_slave_channel_compat()
-
git://cavan.codon.org.uk/platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform driver updates from Matthew Garrett: "Mostly relatively small updates, along with some hardware enablement for Sony hardware and a pile of updates to Google's Chromebook driver" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (49 commits) ideapad-laptop: Depend on BACKLIGHT_CLASS_DEVICE instead of selecting it ideapad: depends on backlight subsystem and update comment Platform: x86: chromeos_laptop - add i915 gmbuses to adapter names Platform: x86: chromeos_laptop - Add isl light sensor for Pixel Platform: x86: chromeos_laptop - Add a more general add_i2c_device Platform: x86: chromeos_laptop - Add Pixel Touchscreen Platform: x86: chromeos_laptop - Add support for probing devices Platform: x86: chromeos_laptop - Add Pixel Trackpad hp-wmi: fix handling of platform device sony-laptop: leak in error handling sony_nc_lid_resume_setup() hp-wmi: Add support for SMBus hotkeys asus-wmi: Fix unused function build warning acer-wmi: avoid the warning of 'devices' may be used uninitialized drivers/platform/x86/thinkpad_acpi.c: Handle HKEY event 0x6040 Platform: x86: chromeos_laptop - Add HP Pavilion 14 Platform: x86: chromeos_laptop - Add Taos tsl2583 device Platform: x86: chromeos_laptop - Add Taos tsl2563 device Platform: x86: chromeos_laptop - Add Acer C7 trackpad Platform: x86: chromeos_laptop - Rename setup_lumpy_tp to setup_cyapa_smbus_tp asus-laptop: always report brightness key events ...
-
- 03 3月, 2013 9 次提交
-
-
由 Geert Uytterhoeven 提交于
tilegx_defconfig: fs/btrfs/raid56.c: In function 'btrfs_alloc_stripe_hash_table': fs/btrfs/raid56.c:206:3: error: implicit declaration of function 'vzalloc' [-Werror=implicit-function-declaration] fs/btrfs/raid56.c:206:9: warning: assignment makes pointer from integer without a cast [enabled by default] fs/btrfs/raid56.c:226:4: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration] Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 bug fixes from Ted Ts'o: "Various bug fixes for ext4. The most important is a fix for the new extent cache's slab shrinker which can cause significant, user-visible pauses when the system is under memory pressure." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: enable quotas before orphan cleanup ext4: don't allow quota mount options when quota feature enabled ext4: fix a warning from sparse check for ext4_dir_llseek ext4: convert number of blocks to clusters properly ext4: fix possible memory leak in ext4_remount() jbd2: fix ERR_PTR dereference in jbd2__journal_start ext4: use percpu counter for extent cache count ext4: optimize ext4_es_shrink()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal由 Linus Torvalds 提交于
Pull sigprocmask compat fix from Al Viro: "generic compat_sys_rt_sigprocmask() had a very dumb braino; I'd spent quite a while staring at the offending commit before finally managing to spot the idiocy ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: fix compat_sys_rt_sigprocmask()
-
由 Al Viro 提交于
Converting bitmask to 32bit granularity is fine, but we'd better _do_ something with the result. Such as "copy it to userland"... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: "We've just concluded another Connectathon interoperability testing week, and so here are the fixes for the bugs that were discovered: - Don't allow NFS silly-renamed files to be deleted - Don't start the retransmission timer when out of socket space - Fix a couple of pnfs-related Oopses. - Fix one more NFSv4 state recovery deadlock - Don't loop forever when LAYOUTGET returns NFS4ERR_LAYOUTTRYLATER" * tag 'nfs-for-3.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: One line comment fix NFSv4.1: LAYOUTGET EDELAY loops timeout to the MDS SUNRPC: add call to get configured timeout PNFS: set the default DS timeout to 60 seconds NFSv4: Fix another open/open_recovery deadlock nfs: don't allow nfs_find_actor to match inodes of the wrong type NFSv4.1: Hold reference to layout hdr in layoutget pnfs: fix resend_to_mds for directio SUNRPC: Don't start the retransmission timer when out of socket space NFS: Don't allow NFS silly-renamed files to be deleted, no signal
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs update from Chris Mason: "The biggest feature in the pull is the new (and still experimental) raid56 code that David Woodhouse started long ago. I'm still working on the parity logging setup that will avoid inconsistent parity after a crash, so this is only for testing right now. But, I'd really like to get it out to a broader audience to hammer out any performance issues or other problems. scrub does not yet correct errors on raid5/6 either. Josef has another pass at fsync performance. The big change here is to combine waiting for metadata with waiting for data, which is a big latency win. It is also step one toward using atomics from the hardware during a commit. Mark Fasheh has a new way to use btrfs send/receive to send only the metadata changes. SUSE is using this to make snapper more efficient at finding changes between snapshosts. Snapshot-aware defrag is also included. Otherwise we have a large number of fixes and cleanups. Eric Sandeen wins the award for removing the most lines, and I'm hoping we steal this idea from XFS over and over again." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (118 commits) btrfs: fixup/remove module.h usage as required Btrfs: delete inline extents when we find them during logging btrfs: try harder to allocate raid56 stripe cache Btrfs: cleanup to make the function btrfs_delalloc_reserve_metadata more logic Btrfs: don't call btrfs_qgroup_free if just btrfs_qgroup_reserve fails Btrfs: remove reduplicate check about root in the function btrfs_clean_quota_tree Btrfs: return ENOMEM rather than use BUG_ON when btrfs_alloc_path fails Btrfs: fix missing deleted items in btrfs_clean_quota_tree btrfs: use only inline_pages from extent buffer Btrfs: fix wrong reserved space when deleting a snapshot/subvolume Btrfs: fix wrong reserved space in qgroup during snap/subv creation Btrfs: remove unnecessary dget_parent/dput when creating the pending snapshot btrfs: remove a printk from scan_one_device Btrfs: fix NULL pointer after aborting a transaction Btrfs: fix memory leak of log roots Btrfs: copy everything if we've created an inline extent btrfs: cleanup for open-coded alignment Btrfs: do not change inode flags in rename Btrfs: use reserved space for creating a snapshot clear chunk_alloc flag on retryable failure ...
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD update from David Woodhouse: "Fairly unexciting MTD merge for 3.9: - misc clean-ups in the MTD command-line partitioning parser (cmdlinepart) - add flash locking support for STmicro chips serial flash chips, as well as for CFI command set 2 chips. - new driver for the ELM error correction HW module found in various TI chips, enable the OMAP NAND driver to use the ELM HW error correction - added number of new serial flash IDs - various fixes and improvements in the gpmi NAND driver - bcm47xx NAND driver improvements - make the mtdpart module actually removable" * tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd: (45 commits) mtd: map: BUG() in non handled cases mtd: bcm47xxnflash: use pr_fmt for module prefix in messages mtd: davinci_nand: Use managed resources mtd: mtd_torturetest can cause stack overflows mtd: physmap_of: Convert device allocation to managed devm_kzalloc() mtd: at91: atmel_nand: for PMECC, add code to check the ONFI parameter ECC requirement. mtd: atmel_nand: make pmecc-cap, pmecc-sector-size in dts is optional. mtd: atmel_nand: avoid to report an error when lookup table offset is 0. mtd: bcm47xxsflash: adjust names of bus-specific functions mtd: bcm47xxpart: improve probing of nvram partition mtd: bcm47xxpart: add support for other erase sizes mtd: bcm47xxnflash: register this as normal driver mtd: bcm47xxnflash: fix message mtd: bcm47xxsflash: register this as normal driver mtd: bcm47xxsflash: write number of written bytes mtd: gpmi: add sanity check for the ECC mtd: gpmi: set the Golois Field bit for mx6q's BCH mtd: devices: elm: Removes <xx> literals in elm DT node mtd: gpmi: fix a dereferencing freed memory error mtd: fix the wrong timeo for panic_nand_wait() ...
-
由 Russell King 提交于
-
由 Trond Myklebust 提交于
Reported-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-