Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 21 5月, 2016 1 次提交
    • A
      lib/vsprintf: simplify UUID printing · aa4ea1c3
      由 Andy Shevchenko 提交于 
      There are few functions here and there along with type definitions that
provide UUID API.  This series consolidates everything under one hood
and converts current users.

This has been tested for a while internally, however it doesn't mean we
covered all possible cases (especially accuracy of UUID constants after
conversion).  So, please test this as much as you can and provide your
tag.  We appreciate the effort.

The ACPI conversion is postponed for now to sort more generic things out
first.

This patch (of 9):

Since we have hex_byte_pack_upper() we may use it directly and avoid
second loop.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      aa4ea1c3
  3. 18 3月, 2016 1 次提交
    • J
      sscanf: implement basic character sets · f9310b2f
      由 Jessica Yu 提交于 
      Implement basic character sets for the '%[' conversion specifier.

The '%[' conversion specifier matches a nonempty sequence of characters
from the specified set of accepted (or with '^', rejected) characters
between the brackets.  The substring matched is to be made up of
characters in (or not in) the set.  This is useful for matching
substrings that are delimited by something other than spaces.

This implementation differs from its glibc counterpart in the following ways:
 (1) No support for character ranges (e.g., 'a-z' or '0-9')
 (2) The hyphen '-' is not a special character
 (3) The closing bracket ']' cannot be matched
 (4) No support (yet) for discarding matching input ('%*[')

The bitmap code is largely based upon sample code which was provided by
Rasmus.

The motivation for adding character set support to sscanf originally
stemmed from the kernel livepatching project.  An ongoing patchset
utilizes new livepatch Elf symbol and section names to store important
metadata livepatch needs to properly apply its patches.  Such metadata
is stored in these section and symbol names as substrings delimited by
periods '.' and commas ','.  For example, a livepatch symbol name might
look like this:

.klp.sym.vmlinux.printk,0

However, sscanf currently can only extract "substrings" delimited by
whitespace using the "%s" specifier.  Thus for the above symbol name,
one cannot not use sscanf() to extract substrings "vmlinux" or
"printk", for example.  A number of discussions on the livepatch
mailing list dealing with string parsing code for extracting these '.'
and ',' delimited substrings eventually led to the conclusion that such
code would be completely unnecessary if the kernel sscanf() supported
character sets.  Thus only a single sscanf() call would be necessary to
extract these substrings.  In addition, such an addition to sscanf()
could benefit other areas of the kernel that might have a similar need
in the future.

[akpm@linux-foundation.org: 80-col tweaks]
Signed-off-by: NJessica Yu <jeyu@redhat.com>
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f9310b2f
  5. 16 3月, 2016 1 次提交
    • V
      mm, printk: introduce new format string for flags · edf14cdb
      由 Vlastimil Babka 提交于 
      In mm we use several kinds of flags bitfields that are sometimes printed
for debugging purposes, or exported to userspace via sysfs.  To make
them easier to interpret independently on kernel version and config, we
want to dump also the symbolic flag names.  So far this has been done
with repeated calls to pr_cont(), which is unreliable on SMP, and not
usable for e.g.  sysfs export.

To get a more reliable and universal solution, this patch extends
printk() format string for pointers to handle the page flags (%pGp),
gfp_flags (%pGg) and vma flags (%pGv).  Existing users of
dump_flag_names() are converted and simplified.

It would be possible to pass flags by value instead of pointer, but the
%p format string for pointers already has extensions for various kernel
structures, so it's a good fit, and the extra indirection in a
non-critical path is negligible.

[linux@rasmusvillemoes.dk: lots of good implementation suggestions]
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      edf14cdb
  7. 12 2月, 2016 1 次提交
  9. 17 1月, 2016 8 次提交
  11. 07 1月, 2016 1 次提交
  13. 07 11月, 2015 5 次提交
  15. 21 7月, 2015 1 次提交
  17. 17 4月, 2015 2 次提交
    • R
      lib/vsprintf.c: improve put_dec_trunc8 slightly · 675cf53c
      由 Rasmus Villemoes 提交于 
      I hadn't had enough coffee when I wrote this. Currently, the final
increment of buf depends on the value loaded from the table, and
causes gcc to emit a cmov immediately before the return. It is smarter
to let it depend on r, since the increment can then be computed in
parallel with the final load/store pair. It also shaves 16 bytes of
.text.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      675cf53c
    • R
      lib/vsprintf.c: even faster binary to decimal conversion · 7c43d9a3
      由 Rasmus Villemoes 提交于 
      The most expensive part of decimal conversion is the divisions by 10
(albeit done using reciprocal multiplication with appropriately chosen
constants).  I decided to see if one could eliminate around half of
these multiplications by emitting two digits at a time, at the cost of a
200 byte lookup table, and it does indeed seem like there is something
to be gained, especially on 64 bits.  Microbenchmarking shows
improvements ranging from -50% (for numbers uniformly distributed in [0,
2^64-1]) to -25% (for numbers heavily biased toward the smaller end, a
more realistic distribution).

On a larger scale, perf shows that top, one of the big consumers of /proc
data, uses 0.5-1.0% fewer cpu cycles.

I had to jump through some hoops to get the 32 bit code to compile and run
on my 64 bit machine, so I'm not sure how relevant these numbers are, but
just for comparison the microbenchmark showed improvements between -30%
and -10%.

The bloat-o-meter costs are around 150 bytes (the generated code is a
little smaller, so it's not the full 200 bytes) on both 32 and 64 bit.
I'm aware that extra cache misses won't show up in a microbenchmark as
used above, but on the other hand decimal conversions often happen in bulk
(for example in the case of top).

I have of course tested that the new code generates the same output as the
old, for both the first and last 1e10 numbers in [0,2^64-1] and 4e9
'random' numbers in-between.

Test and verification code on github: https://github.com/Villemoes/dec.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Tested-by: NJeff Epler <jepler@unpythonic.net>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7c43d9a3
  19. 16 4月, 2015 7 次提交
    • R
      lib/string_helpers.c: change semantics of string_escape_mem · 41416f23
      由 Rasmus Villemoes 提交于 
      The current semantics of string_escape_mem are inadequate for one of its
current users, vsnprintf().  If that is to honour its contract, it must
know how much space would be needed for the entire escaped buffer, and
string_escape_mem provides no way of obtaining that (short of allocating a
large enough buffer (~4 times input string) to let it play with, and
that's definitely a big no-no inside vsnprintf).

So change the semantics for string_escape_mem to be more snprintf-like:
Return the size of the output that would be generated if the destination
buffer was big enough, but of course still only write to the part of dst
it is allowed to, and (contrary to snprintf) don't do '\0'-termination.
It is then up to the caller to detect whether output was truncated and to
append a '\0' if desired.  Also, we must output partial escape sequences,
otherwise a call such as snprintf(buf, 3, "%1pE", "\123") would cause
printf to write a \0 to buf[2] but leaving buf[0] and buf[1] with whatever
they previously contained.

This also fixes a bug in the escaped_string() helper function, which used
to unconditionally pass a length of "end-buf" to string_escape_mem();
since the latter doesn't check osz for being insanely large, it would
happily write to dst.  For example, kasprintf(GFP_KERNEL, "something and
then %pE", ...); is an easy way to trigger an oops.

In test-string_helpers.c, the -ENOMEM test is replaced with testing for
getting the expected return value even if the buffer is too small.  We
also ensure that nothing is written (by relying on a NULL pointer deref)
if the output size is 0 by passing NULL - this has to work for
kasprintf("%pE") to work.

In net/sunrpc/cache.c, I think qword_add still has the same semantics.
Someone should definitely double-check this.

In fs/proc/array.c, I made the minimum possible change, but longer-term it
should stop poking around in seq_file internals.

[andriy.shevchenko@linux.intel.com: simplify qword_add]
[andriy.shevchenko@linux.intel.com: add missed curly braces]
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      41416f23
    • R
      lib/vsprintf.c: fix potential NULL deref in hex_string · 9c98f235
      由 Rasmus Villemoes 提交于 
      The helper hex_string() is broken in two ways.  First, it doesn't
increment buf regardless of whether there is room to print, so callers
such as kasprintf() that try to probe the correct storage to allocate will
get a too small return value.  But even worse, kasprintf() (and likely
anyone else trying to find the size of the result) pass NULL for buf and 0
for size, so we also have end == NULL.  But this means that the end-1 in
hex_string() is (char*)-1, so buf < end-1 is true and we get a NULL
pointer deref.  I double-checked this with a trivial kernel module that
just did a kasprintf(GFP_KERNEL, "%14ph", "CrashBoomBang").

Nobody seems to be using %ph with kasprintf, but we might as well fix it
before it hits someone.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9c98f235
    • G
      lib/vsprintf: add %pC{,n,r} format specifiers for clocks · 900cca29
      由 Geert Uytterhoeven 提交于 
      Add format specifiers for printing struct clk:
  - '%pC' or '%pCn': name (Common Clock Framework) or address (legacy
    clock framework) of the clock,
  - '%pCr': rate of the clock.

[akpm@linux-foundation.org: omit code if !CONFIG_HAVE_CLK]
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      900cca29
    • R
      lib/vsprintf.c: another small hack · d1c1b121
      由 Rasmus Villemoes 提交于 
      Making ZEROPAD == '0'-' ', we can eliminate a few more instructions.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d1c1b121
    • R
      lib/vsprintf.c: eliminate duplicate hex string array · 3ea8d440
      由 Rasmus Villemoes 提交于 
      gcc doesn't merge or overlap const char[] objects with identical contents
(probably language lawyers would also insist that these things have
different addresses), but there's no reason to have the string
"0123456789ABCDEF" occur in multiple places.  hex_asc_upper is declared in
kernel.h and defined in lib/hexdump.c, which is unconditionally compiled
in.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3ea8d440
    • R
      lib/vsprintf.c: reduce stack use in number() · e26c12c7
      由 Rasmus Villemoes 提交于 
      At least since the initial git commit, when base was passed as a separate
parameter, number() has only been called with bases 8, 10 and 16.  I'm
guessing that 66 was to accommodate 64 0/1, a sign and a '\0', but the
buffer is only used for the actual digits.  Octal digits carry 3 bits of
information, so 24 is enough.  Spell that 3*sizeof(num) so one less place
needs to be changed should long long ever be 128 bits.  Also remove the
commented-out code that would handle an arbitrary base.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e26c12c7
    • R
      lib/vsprintf.c: eliminate some branches · 51be17df
      由 Rasmus Villemoes 提交于 
      Since FORMAT_TYPE_INT is simply 1 more than FORMAT_TYPE_UINT, and
similarly for BYTE/UBYTE, SHORT/USHORT, LONG/ULONG, we can eliminate a few
instructions by making SIGN have the value 1 instead of 2, and then use
arithmetic instead of branches for computing the right spec->type.  It's a
little hacky, but certainly in the same spirit as SMALL needing to have
the value 0x20.  For example for the spec->qualifier == 'l' case, gcc now
generates

     75e:       0f b6 53 01             movzbl 0x1(%rbx),%edx
     762:       83 e2 01                and    $0x1,%edx
     765:       83 c2 09                add    $0x9,%edx
     768:       88 13                   mov    %dl,(%rbx)

instead of

     763:       0f b6 53 01             movzbl 0x1(%rbx),%edx
     767:       83 e2 02                and    $0x2,%edx
     76a:       80 fa 01                cmp    $0x1,%dl
     76d:       19 d2                   sbb    %edx,%edx
     76f:       83 c2 0a                add    $0xa,%edx
     772:       88 13                   mov    %dl,(%rbx)
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      51be17df
  21. 14 2月, 2015 1 次提交
    • T
      lib/vsprintf: implement bitmap printing through '%*pb[l]' · dbc760bc
      由 Tejun Heo 提交于 
      bitmap and its derivatives such as cpumask and nodemask currently only
provide formatting functions which put the output string into the
provided buffer; however, how long this buffer should be isn't defined
anywhere and given that some of these bitmaps can be too large to be
formatted into an on-stack buffer it users sometimes are unnecessarily
forced to come up with creative solutions and compromises for the
buffer just to printk these bitmaps.

There have been a couple different attempts at making this easier.

1. Way back, PeterZ tried printk '%pb' extension with the precision
   for bit width - '%.*pb'.  This was intuitive and made sense but
   unfortunately triggered a compile warning about using precision
   for a pointer.

   http://lkml.kernel.org/g/1336577562.2527.58.camel@twins

2. I implemented bitmap_pr_cont[_list]() and its wrappers for cpumask
   and nodemask.  This works but PeterZ pointed out that pr_cont's
   tendency to produce broken lines when multiple CPUs are printing is
   bothering considering the usages.

   http://lkml.kernel.org/g/1418226774-30215-3-git-send-email-tj@kernel.org

So, this patch is another attempt at teaching printk and friends how
to print bitmaps.  It's almost identical to what PeterZ tried with
precision but it uses the field width for the number of bits instead
of precision.  The format used is '%*pb[l]', with the optional
trailing 'l' specifying list format instead of hex masks.

This is a valid format string and doesn't trigger compiler warnings;
however, it does make it impossible to specify output field width when
printing bitmaps.  I think this is an acceptable trade-off given how
much easier it makes printing bitmaps and that we don't have any
in-kernel user which is using the field width specification.  If any
future user wants to use field width with a bitmap, it'd have to
format the bitmap into a string buffer and then print that buffer with
width spec, which isn't different from how it should be done now.

This patch implements bitmap[_list]_string() which are called from the
vsprintf pointer() formatting function.  The implementation is mostly
identical to bitmap_scn[list]printf() except that the output is
performed in the vsprintf way.  These functions handle formatting into
too small buffers and sprintf() family of functions report the correct
overrun output length.

bitmap_scn[list]printf() are now thin wrappers around scnprintf().
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      dbc760bc
  23. 13 2月, 2015 3 次提交
  25. 14 10月, 2014 1 次提交
  27. 09 9月, 2014 1 次提交
  29. 05 6月, 2014 1 次提交
  31. 04 4月, 2014 1 次提交
  33. 27 2月, 2014 1 次提交
    • B
      vsprintf: Add support for IORESOURCE_UNSET in %pR · d19cb803
      由 Bjorn Helgaas 提交于 
      Sometimes we have a struct resource where we know the type (MEM/IO/etc.)
and the size, but we haven't assigned address space for it.  The
IORESOURCE_UNSET flag is a way to indicate this situation.  For these
"unset" resources, the start address is meaningless, so print only the
size, e.g.,

  - pci 0000:0c:00.0: reg 184: [mem 0x00000000-0x00001fff 64bit]
  + pci 0000:0c:00.0: reg 184: [mem size 0x2000 64bit]

For %pr (printing with raw flags), we still print the address range,
because %pr is mostly used for debugging anyway.

Thanks to Fengguang Wu <fengguang.wu@intel.com> for suggesting
resource_size().
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
      d19cb803
  35. 24 1月, 2014 1 次提交
  37. 15 11月, 2013 1 次提交
    • K
      vsprintf: ignore %n again · 9196436a
      由 Kees Cook 提交于 
      This ignores %n in printf again, as was originally documented.
Implementing %n poses a greater security risk than utility, so it should
stay ignored.  To help anyone attempting to use %n, a warning will be
emitted if it is encountered.

Based on an earlier patch by Joe Perches.

Because %n was designed to write to pointers on the stack, it has been
frequently used as an attack vector when bugs are found that leak
user-controlled strings into functions that ultimately process format
strings.  While this class of bug can still be turned into an
information leak, removing %n eliminates the common method of elevating
such a bug into an arbitrary kernel memory writing primitive,
significantly reducing the danger of this class of bug.

For seq_file users that need to know the length of a written string for
padding, please see seq_setwidth() and seq_pad() instead.
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: Joe Perches <joe@perches.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9196436a
  39. 13 11月, 2013 1 次提交