Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 15 5月, 2012 4 次提交
    • D
      xfs: use blocks for storing the desired IO size · aa0e8833
      由 Dave Chinner 提交于 
      Now that we pass block counts everywhere, and index buffers by block
number and length in units of blocks, convert the desired IO size
into block counts rather than bytes. Convert the code to use block
counts, and those that need byte counts get converted at the time of
use.

Rename the b_desired_count variable to something closer to it's
purpose - b_io_length - as it is only used to specify the length of
an IO for a subset of the buffer.  The only time this is used is for
log IO - both writing iclogs and during log recovery. In all other
cases, the b_io_length matches b_length, and hence a lot of code
confuses the two. e.g. the buf item code uses the io count
exclusively when it should be using the buffer length. Fix these
apprpriately as they are found.

Also, remove the XFS_BUF_{SET_}COUNT() macros that are just wrappers
around the desired IO length. They only serve to make the code
shouty loud, don't actually add any real value, and are often used
incorrectly.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>
      aa0e8833
    • D
      xfs: use blocks for counting length of buffers · 4e94b71b
      由 Dave Chinner 提交于 
      Now that we pass block counts everywhere, and index buffers by block
number, track the length of the buffer in units of blocks rather
than bytes. Convert the code to use block counts, and those that
need byte counts get converted at the time of use.

Also, remove the XFS_BUF_{SET_}SIZE() macros that are just wrappers
around the buffer length. They only serve to make the code shouty
loud and don't actually add any real value.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>
      4e94b71b
    • D
      xfs: clean up buffer get/read call API · e70b73f8
      由 Dave Chinner 提交于 
      The xfs_buf_get/read API is not consistent in the units it uses, and
does not use appropriate or consistent units/types for the
variables.

Convert the API to use disk addresses and block counts for all
buffer get and read calls. Use consistent naming for all the
functions and their declarations, and convert the internal functions
to use disk addresses and block counts to avoid need to convert them
from one type to another and back again.

Fix all the callers to use disk addresses and block counts. In many
cases, this removes an additional conversion from the function call
as the callers already have a block count.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>
      e70b73f8
    • C
      xfs: allow assigning the tail lsn with the AIL lock held · 1c304625
      由 Christoph Hellwig 提交于 
      Provide a variant of xlog_assign_tail_lsn that has the AIL lock already
held.  By doing so we do an additional atomic_read + atomic_set under
the lock, which comes down to two instructions.

Switch xfs_trans_ail_update_bulk and xfs_trans_ail_delete_bulk to the
new version to reduce the number of lock roundtrips, and prepare for
a new addition that would require a third lock roundtrip in
xfs_trans_ail_delete_bulk.  This addition is also the reason for
slightly rearranging the conditionals and relying on xfs_log_space_wake
for checking that the filesystem has been shut down internally.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>
      1c304625
  3. 27 3月, 2012 1 次提交
    • D
      xfs: Account log unmount transaction correctly · 3948659e
      由 Dave Chinner 提交于 
      There have been a few reports of this warning appearing recently:

XFS (dm-4): xlog_space_left: head behind tail
 tail_cycle = 129, tail_bytes = 20163072
 GH   cycle = 129, GH   bytes = 20162880

The common cause appears to be lots of freeze and unfreeze cycles,
and the output from the warnings indicates that we are leaking
around 8 bytes of log space per freeze/unfreeze cycle.

When we freeze the filesystem, we write an unmount record and that
uses xlog_write directly - a special type of transaction,
effectively. What it doesn't do, however, is correctly account for
the log space it uses. The unmount record writes an 8 byte structure
with a special magic number into the log, and the space this
consumes is not accounted for in the log ticket tracking the
operation. Hence we leak 8 bytes every unmount record that is
written.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NBen Myers <bpm@sgi.com>
      3948659e
  5. 23 2月, 2012 11 次提交
  7. 09 12月, 2011 1 次提交
  9. 07 12月, 2011 1 次提交
    • C
      xfs: fix the logspace waiting algorithm · 9f9c19ec
      由 Christoph Hellwig 提交于 
      Apply the scheme used in log_regrant_write_log_space to wake up any other
threads waiting for log space before the newly added one to
log_regrant_write_log_space as well, and factor the code into readable
helpers.  For each of the queues we have add two helpers:

 - one to try to wake up all waiting threads.  This helper will also be
   usable by xfs_log_move_tail once we remove the current opportunistic
   wakeups in it.
 - one to sleep on t_wait until enough log space is available, loosely
   modelled after Linux waitqueues.
 
And use them to reimplement the guts of log_regrant_write_log_space and
log_regrant_write_log_space.  These two function now use one and the same
algorithm for waiting on log space instead of subtly different ones before,
with an option to completely unify them in the near future.

Also move the filesystem shutdown handling to the common caller given
that we had to touch it anyway.

Based on hard debugging and an earlier patch from
Chandra Seetharaman <sekharan@us.ibm.com>.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NChandra Seetharaman <sekharan@us.ibm.com>
Tested-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NBen Myers <bpm@sgi.com>
      9f9c19ec
  11. 09 11月, 2011 1 次提交
  13. 12 10月, 2011 3 次提交
  15. 26 7月, 2011 4 次提交
  17. 13 7月, 2011 3 次提交
  19. 08 7月, 2011 5 次提交
  21. 16 6月, 2011 1 次提交
    • C
      xfs: make log devices with write back caches work · a27a263b
      由 Christoph Hellwig 提交于 
      There's no reason not to support cache flushing on external log devices.
The only thing this really requires is flushing the data device first
both in fsync and log commits.  A side effect is that we also have to
remove the barrier write test during mount, which has been superflous
since the new FLUSH+FUA code anyway.  Also use the chance to flush the
RT subvolume write cache before the fsync commit, which is required
for correct semantics.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>
      a27a263b
  23. 20 5月, 2011 1 次提交
    • D
      xfs: reset buffer pointers before freeing them · 44396476
      由 Dave Chinner 提交于 
      When we free a vmapped buffer, we need to ensure the vmap address
and length we free is the same as when it was allocated. In various
places in the log code we change the memory the buffer is pointing
to before issuing IO, but we never reset the buffer to point back to
it's original memory (or no memory, if that is the case for the
buffer).

As a result, when we free the buffer it points to memory that is
owned by something else and attempts to unmap and free it. Because
the range does not match any known mapped range, it can trigger
BUG_ON() traps in the vmap code, and potentially corrupt the vmap
area tracking.

Fix this by always resetting these buffers to their original state
before freeing them.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>
      44396476
  25. 29 4月, 2011 1 次提交
    • C
      xfs: exact busy extent tracking · 97d3ac75
      由 Christoph Hellwig 提交于 
      Update the extent tree in case we have to reuse a busy extent, so that it
always is kept uptodate.  This is done by replacing the busy list searches
with a new xfs_alloc_busy_reuse helper, which updates the busy extent tree
in case of a reuse.  This allows us to allow reusing metadata extents
unconditionally, and thus avoid log forces especially for allocation btree
blocks.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>
      97d3ac75
  27. 08 4月, 2011 2 次提交
    • D
      xfs: convert log tail checking to a warning · da8a1a4a
      由 Dave Chinner 提交于 
      On the Power platform, the log tail debug checks fire excessively
causing the system to panic early in testing. The debug checks are
known to be racy, though on x86_64 there is no evidence that they
trigger at all.

We want to keep the checks active on debug systems to alert us to
problems with log space accounting, but we need to reduce the impact
of a racy check on testing on the Power platform.

As a result, convert the ASSERT conditions to warnings, and
allow them to fire only once per filesystem mount. This will prevent
false positives from interfering with testing, whilst still
providing us with the indication that they may be a problem with log
space accounting should that occur.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>
      da8a1a4a
    • D
      xfs: push the AIL from memory reclaim and periodic sync · fd074841
      由 Dave Chinner 提交于 
      When we are short on memory, we want to expedite the cleaning of
dirty objects.  Hence when we run short on memory, we need to kick
the AIL flushing into action to clean as many dirty objects as
quickly as possible.  To implement this, sample the lsn of the log
item at the head of the AIL and use that as the push target for the
AIL flush.

Further, we keep items in the AIL that are dirty that are not
tracked any other way, so we can get objects sitting in the AIL that
don't get written back until the AIL is pushed. Hence to get the
filesystem to the idle state, we might need to push the AIL to flush
out any remaining dirty objects sitting in the AIL. This requires
the same push mechanism as the reclaim push.

This patch also renames xfs_trans_ail_tail() to xfs_ail_min_lsn() to
match the new xfs_ail_max_lsn() function introduced in this patch.
Similarly for xfs_trans_ail_push -> xfs_ail_push.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NAlex Elder <aelder@sgi.com>
      fd074841
  29. 07 3月, 2011 1 次提交