Since most target drivers do not use the second fabric_make_tpg() argument
("group") and since it is trivial to derive the group pointer from the wwn
pointer, do not pass the group pointer to fabric_make_tpg().
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fixes: e48354ce ("iscsi-target: Add iSCSI fabric support for target v4.1")
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Instead of calling __iscsit_free_cmd() from inside iscsit_aborted_task() if
a command has been aborted and from inside iscsit_free_cmd() if a command
has not been aborted, call __iscsit_free_cmd() from inside
lio_release_cmd(). The latter function is namely called for all commands
once the reference count has dropped to zero.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Cc: Varun Prakash <varun@chelsio.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Instead of embedding the completion that is used for waiting for command
completion in struct se_cmd, let the context that waits for command
completion allocate it. This makes it possible to have a single code path
for non-aborted and aborted commands in target_release_cmd_kref() and
avoids that transport_generic_free_cmd() has to call
cmd->se_tfo->release_cmd() directly. This patch does not change any
functionality. Note: transport_generic_free_cmd() only waits until the
se_cmd reference count has reached zero after it has set both
CMD_T_FABRIC_STOP and CMD_T_ABORTED.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since target_wait_free_cmd() skips TMFs with no associated LUN, it is safe
to call that function for such commands. Use this to simplify
transport_generic_free_cmd(). The only functional change in this patch is
that CMD_T_FABRIC_STOP gets set for TMFs with no associated LUN by
transport_generic_free_cmd().
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Move identical code outside an if/else statement. This patch does not
change any functionality.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For the two calls to transport_cmd_finish_abort() outside
core_tmr_handle_tas_abort() it is guaranteed that CMD_T_TAS is not set. Use
this property to fold core_tmr_handle_tas_abort() into
transport_cmd_finish_abort(). This patch does not change any functionality.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The code that can set CMD_T_TAS is executed by the same thread as the
thread that executes core_tmr_handle_tas_abort(). That means that no
locking is needed to check CMD_T_TAS from inside
core_tmr_handle_tas_abort(). This patch does not change any functionality.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Document those aspects of transport_cmd_check_stop_to_fabric() and
transport_generic_free_cmd() of which it is nontrivial to derive these from
their implementation.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Target drivers must call target_sess_cmd_list_set_waiting() and
target_wait_for_sess_cmds() before freeing a session. Since freeing a
session is only safe after all commands that are associated with a session
have finished, make target_wait_for_sess_cmds() also wait for commands that
are being aborted. Instead of setting a flag in each pending command from
target_sess_cmd_list_set_waiting() and waiting in
target_wait_for_sess_cmds() on a per-command completion, only set a
per-session flag in the former function and wait on a per-session
completion in the latter function. This change is safe because once a SCSI
initiator system has submitted a command a target system is always allowed
to execute it to completion. See also commit 0f4a9431 ("target: Fix
remote-port TMR ABORT + se_cmd fabric stop").

This patch is based on the following two patches:

* Bart Van Assche, target: Simplify session shutdown code, February 19, 2015
  (https://github.com/bvanassche/linux/commit/8df5463d7d7619f2f1b70cfe5172eaef0aa52815).

* Christoph Hellwig, target: Rework session shutdown code, December 7, 2015
  (http://thread.gmane.org/gmane.linux.scsi.target.devel/10695).
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Other than initializing xcopy_pt_sess.sess_wait_list, this patch does not
change any functionality.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch does not change any functionality but makes the next patch
easier to read.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The approach for adding a device to the devices_idr data structure and for
removing it is as follows:

* &dev->dev_group.cg_item is initialized before a device is added to
  devices_idr.

* If the reference count of a device drops to zero then
  target_free_device() removes the device from devices_idr.

* All devices_idr manipulations are protected by device_mutex.

This means that increasing the reference count of a device is sufficient to
prevent removal from devices_idr and also that it is safe access
dev_group.cg_item for any device that is referenced by devices_idr. Use
this to modify target_find_device() and target_for_each_device() such that
these functions no longer introduce a dependency between device_mutex and
the configfs root inode mutex.

Note: it is safe to pass a NULL pointer to config_item_put() and also to
config_item_get_unless_zero().

This patch prevents that lockdep reports the following complaint:

======================================================
WARNING: possible circular locking dependency detected
4.12.0-rc1-dbg+ #1 Not tainted
------------------------------------------------------
rmdir/12053 is trying to acquire lock:
 (device_mutex#2){+.+.+.}, at: [<ffffffffa010afce>]
target_free_device+0xae/0xf0 [target_core_mod]

but task is already holding lock:
 (&sb->s_type->i_mutex_key#14){++++++}, at: [<ffffffff811c5c30>]
vfs_rmdir+0x50/0x140

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&sb->s_type->i_mutex_key#14){++++++}:
       lock_acquire+0x59/0x80
       down_write+0x36/0x70
       configfs_depend_item+0x3a/0xb0 [configfs]
       target_depend_item+0x13/0x20 [target_core_mod]
       target_xcopy_locate_se_dev_e4_iter+0x87/0x100 [target_core_mod]
       target_devices_idr_iter+0x16/0x20 [target_core_mod]
       idr_for_each+0x39/0xc0
       target_for_each_device+0x36/0x50 [target_core_mod]
       target_xcopy_locate_se_dev_e4+0x28/0x80 [target_core_mod]
       target_xcopy_do_work+0x2e9/0xdd0 [target_core_mod]
       process_one_work+0x1ca/0x3f0
       worker_thread+0x49/0x3b0
       kthread+0x109/0x140
       ret_from_fork+0x31/0x40

-> #0 (device_mutex#2){+.+.+.}:
       __lock_acquire+0x101f/0x11d0
       lock_acquire+0x59/0x80
       __mutex_lock+0x7e/0x950
       mutex_lock_nested+0x16/0x20
       target_free_device+0xae/0xf0 [target_core_mod]
       target_core_dev_release+0x10/0x20 [target_core_mod]
       config_item_put+0x6e/0xb0 [configfs]
       configfs_rmdir+0x1a6/0x300 [configfs]
       vfs_rmdir+0xb7/0x140
       do_rmdir+0x1f4/0x200
       SyS_rmdir+0x11/0x20
       entry_SYSCALL_64_fastpath+0x23/0xc2

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&sb->s_type->i_mutex_key#14);
                               lock(device_mutex#2);
                               lock(&sb->s_type->i_mutex_key#14);
  lock(device_mutex#2);

 *** DEADLOCK ***

3 locks held by rmdir/12053:
 #0:  (sb_writers#10){.+.+.+}, at: [<ffffffff811e223f>]
mnt_want_write+0x1f/0x50
 #1:  (&sb->s_type->i_mutex_key#14/1){+.+.+.}, at: [<ffffffff811cb97e>]
do_rmdir+0x15e/0x200
 #2:  (&sb->s_type->i_mutex_key#14){++++++}, at: [<ffffffff811c5c30>]
vfs_rmdir+0x50/0x140

stack backtrace:
CPU: 3 PID: 12053 Comm: rmdir Not tainted 4.12.0-rc1-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0x86/0xcf
 print_circular_bug+0x1c7/0x220
 __lock_acquire+0x101f/0x11d0
 lock_acquire+0x59/0x80
 __mutex_lock+0x7e/0x950
 mutex_lock_nested+0x16/0x20
 target_free_device+0xae/0xf0 [target_core_mod]
 target_core_dev_release+0x10/0x20 [target_core_mod]
 config_item_put+0x6e/0xb0 [configfs]
 configfs_rmdir+0x1a6/0x300 [configfs]
 vfs_rmdir+0xb7/0x140
 do_rmdir+0x1f4/0x200
 SyS_rmdir+0x11/0x20
 entry_SYSCALL_64_fastpath+0x23/0xc2
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
[Rebased to handle conflict withe target_find_device removal]
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Some target code uses config_item_name() while other code accesses .ci_name
directly. Make the target code consistent by switching to
config_item_name().
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

32872863 ("scsi: avoid to hold host-wide counter of host_busy for
scsi_mq") adds one extra check on scsi_host_busy(shost) in
scsi_host_queue_ready(), which is wrong and not necessary, can causes
booting stall on LSI53c895A.

So remove the check.

Cc: Omar Sandoval <osandov@fb.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: Don Brace <don.brace@microsemi.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Fixes: 32872863 ("scsi: avoid to hold host-wide counter of host_busy for scsi_mq")
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In the scsi_transport_srp implementation it cannot be avoided to
iterate over a klist from atomic context when using the legacy block
layer instead of blk-mq. Hence this patch that makes it safe to use
klists in atomic context. This patch avoids that lockdep reports the
following:

WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&k->k_lock)->rlock);
                               local_irq_disable();
                               lock(&(&q->__queue_lock)->rlock);
                               lock(&(&k->k_lock)->rlock);
  <Interrupt>
    lock(&(&q->__queue_lock)->rlock);

stack backtrace:
Workqueue: kblockd blk_timeout_work
Call Trace:
 dump_stack+0xa4/0xf5
 check_usage+0x6e6/0x700
 __lock_acquire+0x185d/0x1b50
 lock_acquire+0xd2/0x260
 _raw_spin_lock+0x32/0x50
 klist_next+0x47/0x190
 device_for_each_child+0x8e/0x100
 srp_timed_out+0xaf/0x1d0 [scsi_transport_srp]
 scsi_times_out+0xd4/0x410 [scsi_mod]
 blk_rq_timed_out+0x36/0x70
 blk_timeout_work+0x1b5/0x220
 process_one_work+0x4fe/0xad0
 worker_thread+0x63/0x5a0
 kthread+0x1c1/0x1e0
 ret_from_fork+0x24/0x30

See also commit c9ddf734 ("scsi: scsi_transport_srp: Fix shost to
rport translation").
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since nr_bytes == blk_rq_bytes(rq) == rq->__data_len, the
rq->__data_len = nr_bytes assignment does not modify the value of
rq->__data_len. Hence remove that assignment. Note: the code in
sd_done() that sets the residual to zero for zone report requests
is not affected by this patch.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The id_tbl->table pointer points to unsigned long so static checkers
complain that instead of 4 we should be allocating sizeof(long) bytes.

We're trying to allocate enough bits for the bitmap.  The size variable is
always 1024.  (1024 / 32 * 4) is the same as (1024 / 64 * 8) so this
doesn't change runtime, but this is the more idiomatic way to do it and
makes the static checker happy.

[mkp: typo]
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NManish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently an open firmware property is copied into partition_name variable
without keeping a room for \0.

Later one, this variable (partition_name), which is 97 bytes long, is
strncpyed into ibmvcsci_host_data->madapter_info->partition_name, which is
96 bytes long, possibly truncating it 'again' and removing the \0.

This patch simply decreases the partition name to 96 and just copy using
strlcpy() which guarantees that the string is \0 terminated. I think there
is no issue if this there is a truncation in this very first copy, i.e,
when the open firmware property is read and copied into the driver for the
very first time;

This issue also causes the following warning on GCC 8:

	drivers/scsi/ibmvscsi/ibmvscsi.c:281:2: warning:  strncpy  output may be truncated copying 96 bytes from a string of length 96 [-Wstringop-truncation]
	...
	inlined from  ibmvscsi_probe  at drivers/scsi/ibmvscsi/ibmvscsi.c:2221:7:
	drivers/scsi/ibmvscsi/ibmvscsi.c:265:3: warning:  strncpy  specified bound 97 equals destination size [-Wstringop-truncation]

CC: Bart Van Assche <bart.vanassche@wdc.com>
CC: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: NBreno Leitao <leitao@debian.org>
Acked-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix warning:

smatch warnings:
drivers/target/target_core_user.c:301 tcmu_genl_cmd_done() warn: KERN_*
level not at start of string
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

It isn't necessary to check the host depth in scsi_queue_rq() any more
since it has been respected by blk-mq before calling scsi_queue_rq() via
getting driver tag.

Lots of LUNs may attach to same host and per-host IOPS may reach millions,
so we should avoid expensive atomic operations on the host-wide counter in
the IO path.

This patch implements scsi_host_busy() via blk_mq_tagset_busy_iter() for
reading the count of busy IOs for scsi_mq.

It is observed that IOPS is increased by 15% in IO test on scsi_debug (32
LUNs, 32 submit queues, 1024 can_queue, libaio/dio) in a dual-socket
system.

[mkp: clarified commit message]

Cc: Omar Sandoval <osandov@fb.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: Don Brace <don.brace@microsemi.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

No functional change.

Just introduce scsi_host_busy() and replace the direct read of
scsi_host->host_busy with this new API.

Cc: Omar Sandoval <osandov@fb.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: Don Brace <don.brace@microsemi.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since blk_rq_bytes(req) returns req->__data_len, assigning that value to
req->__data_len is superfluous. Hence remove that assignment.

See also commit 5db44863 ("[SCSI] sd: Implement support for WRITE SAME").
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch avoids that smatch reports the following warnings:

drivers/scsi/qedi/qedi_fw_api.c:129: init_sqe() warn: inconsistent indenting
drivers/scsi/qedi/qedi_fw_api.c:137: init_sqe() warn: inconsistent indenting
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: QLogic-Storage-Upstream@cavium.com
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Some drivers are ADDing the scsi command's result bytes instead of ORing
them.

While this can produce correct results it has unexpected side effects.
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When evaluating a SCSI command's result using the field access macros,
check for equality of the fields and not if a specific bit is set.

This is a preparation patch, for reworking the results field in the
SCSI command.
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The scsi_io_completion function contains three BUG() and BUG_ON() calls.
Replace them with WARN variants.
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add likely() and unlikely() hints to conditionals on or near the fastpath.
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since the action "reprep" is called from two places, rather than repeat the
code, make a new scsi_io_completion helper with "reprep" as its suffix.
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Place scsi_io_completion()'s complex error processing associated with a
local enumeration into a static helper function. That enumeration's values
start with "ACTION_" so use the suffix "_action" in the helper function's
name.
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Break out several intertwined paths when cmd->result is non zero and place
them in the scsi_io_completion_nz_result helper function. The logic is not
changed.
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Change and add some variable names, adjust some associated comments for
clarity. Correct some misleading comments.
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

scsi_end_request() is called multiple times from scsi_io_completion() which
branches on its bool returned value. Add comment before the static
definition of scsi_end_request() about the meaning of that return.
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

target_find_device is no longer used, so remove it.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Tested-by: NXiubo Li <xiubli@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch based on Xiubo's patches adds 2 tcmu attr to block and reset the
netlink interface. It's used during userspace daemon reinitialization after
the daemon has crashed while there is outstanding nl requests. The daemon
can block the nl interface, kill outstanding requests in the kernel and
then reopen the netlink socket and unblock it to allow new requests.

[mkp: typo]
Signed-off-by: NMike Christie <mchristi@redhat.com>
Tested-by: NXiubo Li <xiubli@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Some misc cleanup of the nl rework patches.

1. Fix space instead of tabs use and extra newline

2. Drop initializing variables to 0 when not needed

3. Just pass the skb_buff and msg_header pointers to
   tcmu_netlink_event_send.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Tested-by: NXiubo Li <xiubli@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Just return EBUSY if a nl request comes in while processing one. The upper
layers do not support sending multiple create/remove requests at the same
time (you cannot have a create and remove at the same time or do multiple
creates or removes at the same time) and doing a reconfig while a
create/remove is still executing does not make sense.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Tested-by: NXiubo Li <xiubli@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The next patch is going to fix the hung nl command issue so this adds a
list of outstanding nl commands that we can later abort when the daemon is
restarted.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When this code changed, this was never cleaned up.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Tested-by: NXiubo Li <xiubli@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>