- 19 4月, 2008 13 次提交
-
-
由 Bahadir Balban 提交于
This patch adds the base files for the PB11MPCore platform support. Signed-off-by: NBahadir Balban <bahadir.balban@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
This patch changes the IO_ADDRESS macro for the RealView platforms to accomodate a wider range of physical addresses on PB11MPCore. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
This patch changes the CPU_V7 configuration dependency to allow MACH_REALVIEW_EB. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
The upcoming PB11MPCore and PB1176 have different memory maps and some of the definitions in platform.h are no longer common. This patch moves them to the board-eb.h file and updates their usage in realview_eb.c. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
Since the PB1176 has different UART base addresses, this patch moves the definitions form platorm.h to board-eb.h. It also modifies uncompress.h to detect the platform type at run-time. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
This patch moves the timer definitions from platform.h into board-eb.h as they are different on PB11MPCore and PB1176. It also adds timerX_va_base variables in core.c which are set by the realview_eb_timer_init function before invoking realview_timer_init. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
This patch moves the patch definitions into board-eb.h and realview_eb.c (from core.c) as they are different on the PB11MPCore and PB1176 platforms. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
This is in preparation for the RealView PB11MPCore and PB1176 patches which have different base addresses for the GIC. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
RealView/EB revD platform comes with the SMSC LAN9118 Ethernet chip. This patch allows either the smc91x or the smc911x drivers to be used with the RealView/EB platform. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
This patch moves the SCU initialisation from __v6_setup to the smp_prepare_cpus() function as it relies on platform-specific settings. Changes to get_core_count() are mainly for allowing cleaner code with the upcoming PB11MPCore patches. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Paul Brook 提交于
This patch implements Thumb-2 application support in Linux. Original implementation by Paul Brook with fixes for VFP and Neon by Catalin Marinas. Signed-off-by: NPaul Brook <paul@codesourcery.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Paul Brook 提交于
This patch adds a prefetch abort handler similar to the data abort one and renames the latter for consistency. Initial implementation by Paul Brook with some renaming by Catalin Marinas. Signed-off-by: NPaul Brook <paul@codesourcery.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
This patch adds the detection and handling of the ThumbEE extension on ARMv7 CPUs. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 26 3月, 2008 4 次提交
-
-
由 Linus Torvalds 提交于
-
由 Bjorn Helgaas 提交于
This fixes the builtin RTL8139 NIC on the Medion MD9580-F laptop. The BIOS reports the interrupt routing incorrectly. I recently added a quirk to work around this, and this patch fixes a typo in the quirk. We pad every ACPI pathname component to four characters, so ".ISA." will never match anything. We need ".ISA_." instead. Thank you Johann-Nikolaus Andreae <johann-nikolaus.andreae@nacs.de> for patiently testing this patch. See http://bugzilla.kernel.org/show_bug.cgi?id=4773Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://jdelvare.pck.nerim.net/jdelvare-2.6由 Linus Torvalds 提交于
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Fix docbook problem ASoC/TLV320AIC3X: Stop I2C driver ID abuse i2c-omap: Fix unhandled fault i2c-bfin-twi: Disable BF54x support for now
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: MMU: Fix memory leak on guest demand faults KVM: VMX: convert init_rmode_tss() to slots_lock KVM: MMU: handle page removal with shadow mapping KVM: MMU: Fix is_rmap_pte() with io ptes KVM: VMX: Restore tss even on x86_64
-
- 25 3月, 2008 23 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: [PATCH] get stack footprint of pathname resolution back to relative sanity [PATCH] double iput() on failure exit in hugetlb [PATCH] double dput() on failure exit in tiny-shmem [PATCH] fix up new filp allocators [PATCH] check for null vfsmount in dentry_open() [PATCH] reiserfs: eliminate private use of struct file in xattr [PATCH] sanitize hppfs hppfs pass vfsmount to dentry_open() [PATCH] restore export of do_kern_mount()
-
由 Avi Kivity 提交于
While backporting 72dc67a6, a gfn_to_page() call was duplicated instead of moved (due to an unrelated patch not being present in mainline). This caused a page reference leak, resulting in a fairly massive memory leak. Fix by removing the extraneous gfn_to_page() call. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
init_rmode_tss was forgotten during the conversion from mmap_sem to slots_lock. INFO: task qemu-system-x86:3748 blocked for more than 120 seconds. Call Trace: [<ffffffff8053d100>] __down_read+0x86/0x9e [<ffffffff8053fb43>] do_page_fault+0x346/0x78e [<ffffffff8053d235>] trace_hardirqs_on_thunk+0x35/0x3a [<ffffffff8053dcad>] error_exit+0x0/0xa9 [<ffffffff8035a7a7>] copy_user_generic_string+0x17/0x40 [<ffffffff88099a8a>] :kvm:kvm_write_guest_page+0x3e/0x5f [<ffffffff880b661a>] :kvm_intel:init_rmode_tss+0xa7/0xf9 [<ffffffff880b7d7e>] :kvm_intel:vmx_vcpu_reset+0x10/0x38a [<ffffffff8809b9a5>] :kvm:kvm_arch_vcpu_setup+0x20/0x53 [<ffffffff8809a1e4>] :kvm:kvm_vm_ioctl+0xad/0x1cf [<ffffffff80249dea>] __lock_acquire+0x4f7/0xc28 [<ffffffff8028fad9>] vfs_ioctl+0x21/0x6b [<ffffffff8028fd75>] do_vfs_ioctl+0x252/0x26b [<ffffffff8028fdca>] sys_ioctl+0x3c/0x5e [<ffffffff8020b01b>] system_call_after_swapgs+0x7b/0x80 Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
Do not assume that a shadow mapping will always point to the same host frame number. Fixes crash with madvise(MADV_DONTNEED). [avi: move after first printk(), add another printk()] Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
is_rmap_pte() doesn't take into account io ptes, which have the avail bit set. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The vmx hardware state restore restores the tss selector and base address, but not its length. Usually, this does not matter since most of the tss contents is within the default length of 0x67. However, if a process is using ioperm() to grant itself I/O port permissions, an additional bitmap within the tss, but outside the default length is consulted. The effect is that the process will receive a SIGSEGV instead of transparently accessing the port. Fix by restoring the tss length. Note that i386 had this working already. Closes bugzilla 10246. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: Fix cut-and-paste error in rtl8150.c USB: ehci: stop vt6212 bus hogging USB: sierra: add another device id USB: sierra: dma fixes USB: add support for Motorola ROKR Z6 cellphone in mass storage mode USB: isd200: fix memory leak in isd200_get_inquiry_data USB: pl2303: another product ID USB: new quirk flag to avoid Set-Interface USB: fix gadgetfs class request delegation
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: driver core: debug for bad dev_attr_show() return value. UIO: add pgprot_noncached() to UIO mmap code
-
由 Andrew Morton 提交于
Revert as it is reported to cause problems for people. commit 4348a2dc Author: Shaohua Li <shaohua.li@intel.com> Date: Wed Oct 24 10:45:08 2007 +0800 pcie: utilize pcie transaction pending bit PCIE has a mechanism to wait for Non-Posted request to complete. I think pci_disable_device is a good place to do this. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Due to the regression reported at http://bugzilla.kernel.org/show_bug.cgi?id=10065 Cc: Shaohua Li <shaohua.li@intel.com> Cc: Soeren Sonnenburg <kernel@nn7.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mark Gross 提交于
lockdep goes off on the iova copy_reserved_iova() because it and a function it calls grabs locks in the from, and the to of the copy operation. The function grab locks of the same lock classes triggering the warning. The first lock grabbed is for the constant reserved areas that is never accessed after early boot. Technically you could do without grabbing the locks for the "from" structure its copying reserved areas from. But dropping the from locks to me looks wrong, even though it would be ok. The affected code only runs in early boot as its setting up the DMAR engines. This patch gives the reserved_ioval_list locks special lockdep classes. Signed-off-by: NMark Gross <mgross@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Morton 提交于
Try to find the culprit who caused http://bugzilla.kernel.org/show_bug.cgi?id=10150 Cc: <balajirrao@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean-Samuel Chenard 提交于
Mapping of physical memory in UIO needs pgprot_noncached() to ensure that IO memory is not cached. Without pgprot_noncached(), it (accidentally) works on x86 and arm, but fails on PPC. Signed-off-by: NJean-Samuel Chenard <jsamch@gmail.com> Signed-off-by: NHans J Koch <hjk@linutronix.de> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rene Herman 提交于
The VIA VT6212 defaults to only waiting 1us between passes over EHCI's async ring, which hammers PCI badly ... and by preventing other devices from accessing the bus, causes problems like drops in IDE throughput, a problem that's been bugging users of those chips for several years. A (partial) datasheet for this chip eventually turned up, letting us see how to make it use a VIA-specific register to switch over to the the normal 10us value instead, as suggested by the EHCI specification Solution noted by Lev A. Melnikovsky. It's not clear whether this register exists on other VIA chips; we know that it's ineffective on the vt8235. So this patch only applies to chips that seem to be incarnations of the (discrete) vt6212. Signed-off-by: NRene Herman <rene.herman@gmail.com> Tested-by: NLev A. Melnikovsky <melnikovsky@mail.ru> Tested-by: NAlessandro Suardi <alessandro.suardi@gmail.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kevin Lloyd 提交于
Add support for the MC8775 device to the sierra driver. Signed-off-by: NKevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
while I was adding autosuspend to that driver I noticed a few issues. You were having DMAed buffers as a part of a structure. This will fail on platforms that are not DMA-coherent (arm, sparc, ppc, ...) Please test this patch to fix it. Signed-off-by: NKevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Constantin Baranov 提交于
Motorola ROKR Z6 cellphone has bugs in its USB, so it is impossible to use it as mass storage. Patch describes new "unusual" USB device for it with FIX_INQUIRY and FIX_CAPACITY flags and new BULK_IGNORE_TAG flag. Last flag relaxes check for equality of bcs->Tag and us->tag in usb_stor_Bulk_transport routine. Signed-off-by: NConstantin Baranov <const@tltsu.ru> Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NDaniel Drake <dsd@gentoo.org> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Boaz Harrosh 提交于
If the inquiry fails then the info structure on us->extra was not freed. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Max Arnold 提交于
Device like this http://aldiga.com/english/A-100-USB-EDGE10.htm contains Prolific 2303 chip. Actually their site a bit outdated - I have AlDiga AL-11U GSM/GPRS/EDGE modem and it works with pl2303 module after adding corresponding product ID. By default modem uses baud rate 460800. GSM chipset - SIMCom SIM600, quad band 850/900/1800/1900 MHz Device info: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=067b ProdID=0611 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=pl2303 E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: Max Arnold <lwarxx@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1057) fixes a problem with the X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter; the device crashes when it receives a Set-Interface request. A new quirk (USB_QUIRK_NO_SET_INTF) is introduced and a quirks entry is created for this device. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roy Hashimoto 提交于
gadgetfs (drivers/usb/gadget/inode.c) was not delegating all non-device requests to userspace. This patch makes the handling of all request cases consistent. Signed-off-by: NRoy Hashimoto <hashimot@alumni.caltech.edu> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] mpc5200: Fix incorrect compatible string for the mdio node [POWERPC] Update some defconfigs
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] ahci: SB600 workaround is suspect... play it safe for now sata_promise: fix hardreset hotplug events, take 2 libata: improve HPA error handling libata: assume no device is attached if both IDENTIFYs are aborted pata_it821x: use raw nbytes in check_atapi_dma libata: implement ata_qc_raw_nbytes()
-