1. 30 3月, 2012 2 次提交
  2. 29 3月, 2012 38 次提交
    • L
      Merge tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc · b5174fa3
      Linus Torvalds 提交于
      Pull MMC updates from Chris Ball:
      
      Core:
       * Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices
         that support Data Tag will provide increased throughput for metadata.
       * Faster detection of card removal on I/O errors.
      
      Drivers:
       * dw_mmc now supports eMMC Power Off Notify, has PCI support, and
         implements pre_req and post_req for asynchronous requests.
       * omap_hsmmc now supports device tree.
       * esdhc now has power management support.
       * sdhci-tegra now supports Tegra30 devices.
       * sdhci-spear now supports hibernation.
       * tmio_mmc now supports using a GPIO for card detection.
       * Intel PCH now supports 8-bit bus transfers.
      
      * tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits)
        mmc: sh_mmcif: simplify bitmask macros
        mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug
        mmc: sh_mobile_sdhi: add a callback for board specific init code
        mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function
        mmc: sh_mobile_sdhi: do not manage PM clocks manually
        mmc: tmio_mmc: remove unused sdio_irq_enabled flag
        mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data
        mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC
        mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper
        mmc: tmio: calculate the native hotplug condition only once
        mmc: simplify mmc_cd_gpio_request() by removing two parameters
        mmc: sdhci-pci: allow 8-bit bus width for Intel PCH
        mmc: sdhci: check interrupt flags in ISR again
        mmc: sdhci-pci: Add MSI support
        mmc: core: warn when card doesn't support HPI
        mmc: davinci: Poll status for small size transfers
        mmc: davinci: Eliminate spurious interrupts
        mmc: omap_hsmmc: Avoid a regulator voltage change with dt
        mmc: omap_hsmmc: Convert hsmmc driver to use device tree
        mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO
        ...
      b5174fa3
    • L
      Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd · afb9bd70
      Linus Torvalds 提交于
      Pull trivial exofs changes from Boaz Harrosh:
       "Just nothingness really.  The big exofs changes are reserved for the
        next merge window."
      
      * 'for-linus' of git://git.open-osd.org/linux-open-osd:
        exofs: Cap on the memcpy() size
        exofs: (trivial) Fix typo in super.c
        exofs: fix endian conversion in exofs_sync_fs()
      afb9bd70
    • L
      Merge tag 'nfs-for-3.4-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs · 58df9b38
      Linus Torvalds 提交于
      Pull NFS client bugfixes for Linux 3.4 from Trond Myklebust
      
      Highlights include:
      - Fix infinite loops in the mount code
      - Fix a userspace buffer overflow in __nfs4_get_acl_uncached
      - Fix a memory leak due to a double reference count in rpcb_getport_async()
      Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      
      * tag 'nfs-for-3.4-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
        NFSv4: Minor cleanups for nfs4_handle_exception and nfs4_async_handle_error
        NFSv4.1: Fix layoutcommit error handling
        NFSv4: Fix two infinite loops in the mount code
        SUNRPC: Use the already looked-up xprt in rpcb_getport_async()
        NFS4.1: remove duplicate variable declaration in filelayout_clear_request_commit
        Fix length of buffer copied in __nfs4_get_acl_uncached
      58df9b38
    • L
      Merge tag 'squashfs-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next · 8563f878
      Linus Torvalds 提交于
      Pull squashfs updates from Phillip Lougher:
       "Add an extra mount time sanity check, plus some code cleanups and bug
        fixes."
      
      * tag 'squashfs-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next:
        Squashfs: add mount time sanity check for block_size and block_log match
        Squashfs: fix f_pos check in get_dir_index_using_offset
        Squashfs: get rid of obsolete definitions in header file
        Squashfs: remove redundant length initialisation in squashfs_lookup
        Squashfs: remove redundant length initialisation in squashfs_readdir
        Squashfs: update comment removing reference to zlib only
        Squashfs: use define instead of constant
      8563f878
    • L
      Merge branch 'akpm' (Andrew's patch-bomb) · 532bfc85
      Linus Torvalds 提交于
      Merge third batch of patches from Andrew Morton:
       - Some MM stragglers
       - core SMP library cleanups (on_each_cpu_mask)
       - Some IPI optimisations
       - kexec
       - kdump
       - IPMI
       - the radix-tree iterator work
       - various other misc bits.
      
       "That'll do for -rc1.  I still have ~10 patches for 3.4, will send
        those along when they've baked a little more."
      
      * emailed from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
        backlight: fix typo in tosa_lcd.c
        crc32: add help text for the algorithm select option
        mm: move hugepage test examples to tools/testing/selftests/vm
        mm: move slabinfo.c to tools/vm
        mm: move page-types.c from Documentation to tools/vm
        selftests/Makefile: make `run_tests' depend on `all'
        selftests: launch individual selftests from the main Makefile
        radix-tree: use iterators in find_get_pages* functions
        radix-tree: rewrite gang lookup using iterator
        radix-tree: introduce bit-optimized iterator
        fs/proc/namespaces.c: prevent crash when ns_entries[] is empty
        nbd: rename the nbd_device variable from lo to nbd
        pidns: add reboot_pid_ns() to handle the reboot syscall
        sysctl: use bitmap library functions
        ipmi: use locks on watchdog timeout set on reboot
        ipmi: simplify locking
        ipmi: fix message handling during panics
        ipmi: use a tasklet for handling received messages
        ipmi: increase KCS timeouts
        ipmi: decrease the IPMI message transaction time in interrupt mode
        ...
      532bfc85
    • M
      backlight: fix typo in tosa_lcd.c · 8da00edc
      Masanari Iida 提交于
      Fix typo in drivers/video/backlight/tosa_lcd.c
      "tosa_lcd_reume" should be "tosa_lcd_resume".
      Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8da00edc
    • D
      crc32: add help text for the algorithm select option · 82edb4ba
      Darrick J. Wong 提交于
      Add help text to the crc32 algorithm selection option in Kconfig.
      Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
      Reported-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      82edb4ba
    • D
      mm: move hugepage test examples to tools/testing/selftests/vm · f0f57b2b
      Dave Young 提交于
      hugepage-mmap.c, hugepage-shm.c and map_hugetlb.c in Documentation/vm are
      simple pass/fail tests, It's better to promote them to
      tools/testing/selftests.
      
      Thanks suggestion of Andrew Morton about this.  They all need firstly
      setting up proper nr_hugepages and hugepage-mmap need to mount hugetlbfs.
      So I add a shell script run_vmtests to do such work which will call the
      three test programs and check the return value of them.
      
      Changes to original code including below:
      a. add run_vmtests script
      b. return error when read_bytes mismatch with writed bytes.
      c. coding style fixes: do not use assignment in if condition
      
      [akpm@linux-foundation.org: build the targets before trying to execute them]
      [akpm@linux-foundation.org: Documentation/vm/ no longer has a Makefile. Fixes "make clean"]
      Signed-off-by: NDave Young <dyoung@redhat.com>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@cs.helsinki.fi>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f0f57b2b
    • D
      mm: move slabinfo.c to tools/vm · 63e31553
      Dave Young 提交于
      We have tools/vm/ folder for vm tools, so move slabinfo.c from tools/slub/
      to tools/vm/
      Signed-off-by: NDave Young <dyoung@redhat.com>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Acked-by: NChristoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@cs.helsinki.fi>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      63e31553
    • D
      mm: move page-types.c from Documentation to tools/vm · c6dd897f
      Dave Young 提交于
      tools/ is the better place for vm tools which are used by many people.
      Moving them to tools also make them open to more users instead of hide in
      Documentation folder.
      
      This patch moves page-types.c to tools/vm/page-types.c.  Also add a
      Makefile in tools/vm and fix two coding style problems: a) change const
      arrary to 'const char * const', b) change a space to tab for indent.
      Signed-off-by: NDave Young <dyoung@redhat.com>
      Acked-by: NWu Fengguang <fengguang.wu@intel.com>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@cs.helsinki.fi>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c6dd897f
    • A
      selftests/Makefile: make `run_tests' depend on `all' · cab6b056
      Andrew Morton 提交于
      So a "make run_tests" will build the tests before trying to run them.
      Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      cab6b056
    • F
      selftests: launch individual selftests from the main Makefile · f467f714
      Frederic Weisbecker 提交于
      Remove the run_tests script and launch the selftests by calling "make
      run_tests" from the selftests top directory instead.  This delegates to
      the Makefile in each selftest directory, where it is decided how to launch
      the local test.
      
      This removes the need to add each selftest directory to the now removed
      "run_tests" top script.
      Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
      Cc: Dave Young <dyoung@redhat.com>
      Cc: Christoph Lameter <cl@linux.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f467f714
    • K
      radix-tree: use iterators in find_get_pages* functions · 0fc9d104
      Konstantin Khlebnikov 提交于
      Replace radix_tree_gang_lookup_slot() and
      radix_tree_gang_lookup_tag_slot() in page-cache lookup functions with
      brand-new radix-tree direct iterating.  This avoids the double-scanning
      and pointer copying.
      
      Iterator don't stop after nr_pages page-get fails in a row, it continue
      lookup till the radix-tree end.  Thus we can safely remove these restart
      conditions.
      
      Unfortunately, old implementation didn't forbid nr_pages == 0, this corner
      case does not fit into new code, so the patch adds an extra check at the
      beginning.
      Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
      Tested-by: NHugh Dickins <hughd@google.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0fc9d104
    • K
      radix-tree: rewrite gang lookup using iterator · cebbd29e
      Konstantin Khlebnikov 提交于
      Rewrite radix_tree_gang_lookup_* functions using the new radix-tree
      iterator.
      Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
      Tested-by: NHugh Dickins <hughd@google.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      cebbd29e
    • K
      radix-tree: introduce bit-optimized iterator · 78c1d784
      Konstantin Khlebnikov 提交于
      A series of radix tree cleanups, and usage of them in the core pagecache
      code.
      
      Micro-benchmark:
      
      lookup 14 slots (typical page-vector size)
      in radix-tree there earch <step> slot filled and tagged
      before/after - nsec per full scan through tree
      
      * Intel Sandy Bridge i7-2620M 4Mb L3
      New code always faster
      
      * AMD Athlon 6000+ 2x1Mb L2, without L3
      New code generally faster,
      Minor degradation (marked with "*") for huge sparse trees
      
      * i386 on Sandy Bridge
      New code faster for common cases: tagged and dense trees.
      Some degradations for non-tagged lookup on sparse trees.
      
      Ideally, there might help __ffs() analog for searching first non-zero
      long element in array, gcc sometimes cannot optimize this loop corretly.
      
      Numbers:
      
      CPU: Intel Sandy Bridge i7-2620M 4Mb L3
      
      radix-tree with 1024 slots:
      
      tagged lookup
      
      step  1      before  7156        after  3613
      step  2      before  5399        after  2696
      step  3      before  4779        after  1928
      step  4      before  4456        after  1429
      step  5      before  4292        after  1213
      step  6      before  4183        after  1052
      step  7      before  4157        after  951
      step  8      before  4016        after  812
      step  9      before  3952        after  851
      step  10     before  3937        after  732
      step  11     before  4023        after  709
      step  12     before  3872        after  657
      step  13     before  3892        after  633
      step  14     before  3720        after  591
      step  15     before  3879        after  578
      step  16     before  3561        after  513
      
      normal lookup
      
      step  1      before  4266       after  3301
      step  2      before  2695       after  2129
      step  3      before  2083       after  1712
      step  4      before  1801       after  1534
      step  5      before  1628       after  1313
      step  6      before  1551       after  1263
      step  7      before  1475       after  1185
      step  8      before  1432       after  1167
      step  9      before  1373       after  1092
      step  10     before  1339       after  1134
      step  11     before  1292       after  1056
      step  12     before  1319       after  1030
      step  13     before  1276       after  1004
      step  14     before  1256       after  987
      step  15     before  1228       after  992
      step  16     before  1247       after  999
      
      radix-tree with 1024*1024*128 slots:
      
      tagged lookup
      
      step  1      before  1086102841  after  674196409
      step  2      before  816839155   after  498138306
      step  7      before  599728907   after  240676762
      step  15     before  555729253   after  185219677
      step  63     before  606637748   after  128585664
      step  64     before  608384432   after  102945089
      step  65     before  596987114   after  123996019
      step  128    before  304459225   after  56783056
      step  256    before  158846855   after  31232481
      step  512    before  86085652    after  18950595
      step  12345  before  6517189     after  1674057
      
      normal lookup
      
      step  1      before  626064869  after  544418266
      step  2      before  418809975  after  336321473
      step  7      before  242303598  after  207755560
      step  15     before  208380563  after  176496355
      step  63     before  186854206  after  167283638
      step  64     before  176188060  after  170143976
      step  65     before  185139608  after  167487116
      step  128    before  88181865   after  86913490
      step  256    before  45733628   after  45143534
      step  512    before  24506038   after  23859036
      step  12345  before  2177425    after  2018662
      
      * AMD Athlon 6000+ 2x1Mb L2, without L3
      
      radix-tree with 1024 slots:
      
      tag-lookup
      
      step  1      before  8164        after  5379
      step  2      before  5818        after  5581
      step  3      before  4959        after  4213
      step  4      before  4371        after  3386
      step  5      before  4204        after  2997
      step  6      before  4950        after  2744
      step  7      before  4598        after  2480
      step  8      before  4251        after  2288
      step  9      before  4262        after  2243
      step  10     before  4175        after  2131
      step  11     before  3999        after  2024
      step  12     before  3979        after  1994
      step  13     before  3842        after  1929
      step  14     before  3750        after  1810
      step  15     before  3735        after  1810
      step  16     before  3532        after  1660
      
      normal-lookup
      
      step  1      before  7875        after  5847
      step  2      before  4808        after  4071
      step  3      before  4073        after  3462
      step  4      before  3677        after  3074
      step  5      before  4308        after  2978
      step  6      before  3911        after  3807
      step  7      before  3635        after  3522
      step  8      before  3313        after  3202
      step  9      before  3280        after  3257
      step  10     before  3166        after  3083
      step  11     before  3066        after  3026
      step  12     before  2985        after  2982
      step  13     before  2925        after  2924
      step  14     before  2834        after  2808
      step  15     before  2805        after  2803
      step  16     before  2647        after  2622
      
      radix-tree with 1024*1024*128 slots:
      
      tag-lookup
      
      step  1      before  1288059720  after  951736580
      step  2      before  961292300   after  884212140
      step  7      before  768905140   after  547267580
      step  15     before  771319480   after  456550640
      step  63     before  504847640   after  242704304
      step  64     before  392484800   after  177920786
      step  65     before  491162160   after  246895264
      step  128    before  208084064   after  97348392
      step  256    before  112401035   after  51408126
      step  512    before  75825834    after  29145070
      step  12345  before  5603166     after  2847330
      
      normal-lookup
      
      step  1      before  1025677120  after  861375100
      step  2      before  647220080   after  572258540
      step  7      before  505518960   after  484041813
      step  15     before  430483053   after  444815320	*
      step  63     before  388113453   after  404250546	*
      step  64     before  374154666   after  396027440	*
      step  65     before  381423973   after  396704853	*
      step  128    before  190078700   after  202619384	*
      step  256    before  100886756   after  102829108	*
      step  512    before  64074505    after  56158720
      step  12345  before  4237289     after  4422299		*
      
      * i686 on Sandy bridge
      
      radix-tree with 1024 slots:
      
      tagged lookup
      
      step  1      before  7990        after  4019
      step  2      before  5698        after  2897
      step  3      before  5013        after  2475
      step  4      before  4630        after  1721
      step  5      before  4346        after  1759
      step  6      before  4299        after  1556
      step  7      before  4098        after  1513
      step  8      before  4115        after  1222
      step  9      before  3983        after  1390
      step  10     before  4077        after  1207
      step  11     before  3921        after  1231
      step  12     before  3894        after  1116
      step  13     before  3840        after  1147
      step  14     before  3799        after  1090
      step  15     before  3797        after  1059
      step  16     before  3783        after  745
      
      normal lookup
      
      step  1      before  5103       after  3499
      step  2      before  3299       after  2550
      step  3      before  2489       after  2370
      step  4      before  2034       after  2302		*
      step  5      before  1846       after  2268		*
      step  6      before  1752       after  2249		*
      step  7      before  1679       after  2164		*
      step  8      before  1627       after  2153		*
      step  9      before  1542       after  2095		*
      step  10     before  1479       after  2109		*
      step  11     before  1469       after  2009		*
      step  12     before  1445       after  2039		*
      step  13     before  1411       after  2013		*
      step  14     before  1374       after  2046		*
      step  15     before  1340       after  1975		*
      step  16     before  1331       after  2000		*
      
      radix-tree with 1024*1024*128 slots:
      
      tagged lookup
      
      step  1      before  1225865377  after  667153553
      step  2      before  842427423   after  471533007
      step  7      before  609296153   after  276260116
      step  15     before  544232060   after  226859105
      step  63     before  519209199   after  141343043
      step  64     before  588980279   after  141951339
      step  65     before  521099710   after  138282060
      step  128    before  298476778   after  83390628
      step  256    before  149358342   after  43602609
      step  512    before  76994713    after  22911077
      step  12345  before  53286669     after  1472111
      
      normal lookup
      
      step  1      before  819284564  after  533635310
      step  2      before  512421605  after  364956155
      step  7      before  271443305  after  305721345	*
      step  15     before  223591630  after  273960216	*
      step  63     before  190320247  after  217770207	*
      step  64     before  178538168  after  267411372	*
      step  65     before  186400423  after  215347937	*
      step  128    before  88106045   after  140540612	*
      step  256    before  44812420   after  70660377		*
      step  512    before  24435438   after  36328275		*
      step  12345  before  2123924    after  2148062		*
      
      bloat-o-meter delta for this patchset + patchset with related shmem cleanups
      
      bloat-o-meter: x86_64
      
      add/remove: 4/3 grow/shrink: 5/6 up/down: 928/-939 (-11)
      function                                     old     new   delta
      radix_tree_next_chunk                          -     499    +499
      shmem_unuse                                  428     554    +126
      shmem_radix_tree_replace                     131     227     +96
      find_get_pages_tag                           354     419     +65
      find_get_pages_contig                        345     407     +62
      find_get_pages                               362     396     +34
      __kstrtab_radix_tree_next_chunk                -      22     +22
      __ksymtab_radix_tree_next_chunk                -      16     +16
      __kcrctab_radix_tree_next_chunk                -       8      +8
      radix_tree_gang_lookup_slot                  204     203      -1
      static.shmem_xattr_set                       384     381      -3
      radix_tree_gang_lookup_tag_slot              208     191     -17
      radix_tree_gang_lookup                       231     187     -44
      radix_tree_gang_lookup_tag                   247     199     -48
      shmem_unlock_mapping                         278     190     -88
      __lookup                                     217       -    -217
      __lookup_tag                                 242       -    -242
      radix_tree_locate_item                       279       -    -279
      
      bloat-o-meter: i386
      
      add/remove: 3/3 grow/shrink: 8/9 up/down: 1075/-1275 (-200)
      function                                     old     new   delta
      radix_tree_next_chunk                          -     757    +757
      shmem_unuse                                  352     449     +97
      find_get_pages_contig                        269     322     +53
      shmem_radix_tree_replace                     113     154     +41
      find_get_pages_tag                           277     318     +41
      dcache_dir_lseek                             426     458     +32
      __kstrtab_radix_tree_next_chunk                -      22     +22
      vc_do_resize                                 968     977      +9
      snd_pcm_lib_read1                            725     733      +8
      __ksymtab_radix_tree_next_chunk                -       8      +8
      netlbl_cipsov4_list                         1120    1127      +7
      find_get_pages                               293     291      -2
      new_slab                                     467     459      -8
      bitfill_unaligned_rev                        425     417      -8
      radix_tree_gang_lookup_tag_slot              177     146     -31
      blk_dump_cmd                                 267     229     -38
      radix_tree_gang_lookup_slot                  212     134     -78
      shmem_unlock_mapping                         221     128     -93
      radix_tree_gang_lookup_tag                   275     162    -113
      radix_tree_gang_lookup                       255     126    -129
      __lookup                                     227       -    -227
      __lookup_tag                                 271       -    -271
      radix_tree_locate_item                       277       -    -277
      
      This patch:
      
      Implement a clean, simple and effective radix-tree iteration routine.
      
      Iterating divided into two phases:
      * lookup next chunk in radix-tree leaf node
      * iterating through slots in this chunk
      
      Main iterator function radix_tree_next_chunk() returns pointer to first
      slot, and stores in the struct radix_tree_iter index of next-to-last slot.
       For tagged-iterating it also constuct bitmask of tags for retunted chunk.
       All additional logic implemented as static-inline functions and macroses.
      
      Also adds radix_tree_find_next_bit() static-inline variant of
      find_next_bit() optimized for small constant size arrays, because
      find_next_bit() too heavy for searching in an array with one/two long
      elements.
      
      [akpm@linux-foundation.org: rework comments a bit]
      Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
      Tested-by: NHugh Dickins <hughd@google.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      78c1d784
    • A
      fs/proc/namespaces.c: prevent crash when ns_entries[] is empty · 4c619aa0
      Andrew Morton 提交于
      If CONFIG_NET_NS, CONFIG_UTS_NS and CONFIG_IPC_NS are disabled,
      ns_entries[] becomes empty and things like
      ns_entries[ARRAY_SIZE(ns_entries) - 1] will explode.
      Reported-by: NRichard Weinberger <richard@nod.at>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Cc: Daniel Lezcano <daniel.lezcano@free.fr>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4c619aa0
    • W
      nbd: rename the nbd_device variable from lo to nbd · f4507164
      Wanlong Gao 提交于
      rename the nbd_device variable from "lo" to "nbd", since "lo" is just a name
      copied from loop.c.
      Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
      Cc: Paul Clements <paul.clements@steeleye.com>
      Cc: Jens Axboe <axboe@kernel.dk>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f4507164
    • D
      pidns: add reboot_pid_ns() to handle the reboot syscall · cf3f8921
      Daniel Lezcano 提交于
      In the case of a child pid namespace, rebooting the system does not really
      makes sense.  When the pid namespace is used in conjunction with the other
      namespaces in order to create a linux container, the reboot syscall leads
      to some problems.
      
      A container can reboot the host.  That can be fixed by dropping the
      sys_reboot capability but we are unable to correctly to poweroff/
      halt/reboot a container and the container stays stuck at the shutdown time
      with the container's init process waiting indefinitively.
      
      After several attempts, no solution from userspace was found to reliabily
      handle the shutdown from a container.
      
      This patch propose to make the init process of the child pid namespace to
      exit with a signal status set to : SIGINT if the child pid namespace
      called "halt/poweroff" and SIGHUP if the child pid namespace called
      "reboot".  When the reboot syscall is called and we are not in the initial
      pid namespace, we kill the pid namespace for "HALT", "POWEROFF",
      "RESTART", and "RESTART2".  Otherwise we return EINVAL.
      
      Returning EINVAL is also an easy way to check if this feature is supported
      by the kernel when invoking another 'reboot' option like CAD.
      
      By this way the parent process of the child pid namespace knows if it
      rebooted or not and can take the right decision.
      
      Test case:
      ==========
      
      #include <alloca.h>
      #include <stdio.h>
      #include <sched.h>
      #include <unistd.h>
      #include <signal.h>
      #include <sys/reboot.h>
      #include <sys/types.h>
      #include <sys/wait.h>
      
      #include <linux/reboot.h>
      
      static int do_reboot(void *arg)
      {
              int *cmd = arg;
      
              if (reboot(*cmd))
                      printf("failed to reboot(%d): %m\n", *cmd);
      }
      
      int test_reboot(int cmd, int sig)
      {
              long stack_size = 4096;
              void *stack = alloca(stack_size) + stack_size;
              int status;
              pid_t ret;
      
              ret = clone(do_reboot, stack, CLONE_NEWPID | SIGCHLD, &cmd);
              if (ret < 0) {
                      printf("failed to clone: %m\n");
                      return -1;
              }
      
              if (wait(&status) < 0) {
                      printf("unexpected wait error: %m\n");
                      return -1;
              }
      
              if (!WIFSIGNALED(status)) {
                      printf("child process exited but was not signaled\n");
                      return -1;
              }
      
              if (WTERMSIG(status) != sig) {
                      printf("signal termination is not the one expected\n");
                      return -1;
              }
      
              return 0;
      }
      
      int main(int argc, char *argv[])
      {
              int status;
      
              status = test_reboot(LINUX_REBOOT_CMD_RESTART, SIGHUP);
              if (status < 0)
                      return 1;
              printf("reboot(LINUX_REBOOT_CMD_RESTART) succeed\n");
      
              status = test_reboot(LINUX_REBOOT_CMD_RESTART2, SIGHUP);
              if (status < 0)
                      return 1;
              printf("reboot(LINUX_REBOOT_CMD_RESTART2) succeed\n");
      
              status = test_reboot(LINUX_REBOOT_CMD_HALT, SIGINT);
              if (status < 0)
                      return 1;
              printf("reboot(LINUX_REBOOT_CMD_HALT) succeed\n");
      
              status = test_reboot(LINUX_REBOOT_CMD_POWER_OFF, SIGINT);
              if (status < 0)
                      return 1;
              printf("reboot(LINUX_REBOOT_CMD_POWERR_OFF) succeed\n");
      
              status = test_reboot(LINUX_REBOOT_CMD_CAD_ON, -1);
              if (status >= 0) {
                      printf("reboot(LINUX_REBOOT_CMD_CAD_ON) should have failed\n");
                      return 1;
              }
              printf("reboot(LINUX_REBOOT_CMD_CAD_ON) has failed as expected\n");
      
              return 0;
      }
      
      [akpm@linux-foundation.org: tweak and add comments]
      [akpm@linux-foundation.org: checkpatch fixes]
      Signed-off-by: NDaniel Lezcano <daniel.lezcano@free.fr>
      Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
      Tested-by: NSerge Hallyn <serge.hallyn@canonical.com>
      Reviewed-by: NOleg Nesterov <oleg@redhat.com>
      Cc: Michael Kerrisk <mtk.manpages@gmail.com>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Cc: Tejun Heo <tj@kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      cf3f8921
    • A
      sysctl: use bitmap library functions · 5a04cca6
      Akinobu Mita 提交于
      Use bitmap_set() instead of using set_bit() for each bit.  This conversion
      is valid because the bitmap is private in the function call and atomic
      bitops were unnecessary.
      
      This also includes minor change.
      - Use bitmap_copy() for shorter typing
      Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      5a04cca6
    • C
      ipmi: use locks on watchdog timeout set on reboot · 423a5bb4
      Corey Minyard 提交于
      The IPMI watchdog timer clears or extends the timer on reboot/shutdown.
      It was using the non-locking routine for setting the watchdog timer, but
      this was causing race conditions.  Instead, use the locking version to
      avoid the races.  It seems to work fine.
      Signed-off-by: NCorey Minyard <cminyard@mvista.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      423a5bb4
    • C
      ipmi: simplify locking · f60adf42
      Corey Minyard 提交于
      Now that the the IPMI driver is using a tasklet, we can simplify the
      locking in the driver and get rid of the message lock.
      Signed-off-by: NCorey Minyard <cminyard@mvista.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f60adf42
    • C
      ipmi: fix message handling during panics · 895dcfd1
      Corey Minyard 提交于
      The part of the IPMI driver that delivered panic information to the event
      log and extended the watchdog timeout during a panic was not properly
      handling the messages.  It used static messages to avoid allocation, but
      wasn't properly waiting for these, or wasn't properly handling the
      refcounts.
      Signed-off-by: NCorey Minyard <cminyard@mvista.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      895dcfd1
    • C
      ipmi: use a tasklet for handling received messages · 7adf579c
      Corey Minyard 提交于
      The IPMI driver would release a lock, deliver a message, then relock.
      This is obviously ugly, and this patch converts the message handler
      interface to use a tasklet to schedule work.  This lets the receive
      handler be called from an interrupt handler with interrupts enabled.
      Signed-off-by: NCorey Minyard <cminyard@mvista.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7adf579c
    • M
      ipmi: increase KCS timeouts · 828dc9da
      Matthew Garrett 提交于
      We currently time out and retry KCS transactions after 1 second of waiting
      for IBF or OBF.  This appears to be too short for some hardware.  The IPMI
      spec says "All system software wait loops should include error timeouts.
      For simplicity, such timeouts are not shown explicitly in the flow
      diagrams.  A five-second timeout or greater is recommended".  Change the
      timeout to five seconds to satisfy the slow hardware.
      Signed-off-by: NMatthew Garrett <mjg@redhat.com>
      Signed-off-by: NCorey Minyard <cminyard@mvista.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      828dc9da
    • S
      ipmi: decrease the IPMI message transaction time in interrupt mode · b88e7693
      Srinivas_Gowda 提交于
      Call the event handler immediately after starting the next message.
      
      This change considerably decreases the IPMI transaction time (cuts off
      ~9ms for a single ipmitool transaction).
      Signed-off-by: NSrinivas_Gowda <srinivas_g_gowda@dell.com>
      Signed-off-by: NCorey Minyard <cminyard@mvista.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b88e7693
    • D
      kdump x86: fix total mem size calculation for reservation · 09c71bfd
      Dave Young 提交于
      crashkernel reservation need know the total memory size.  Current
      get_total_mem simply use max_pfn - min_low_pfn.  It is wrong because it
      will including memory holes in the middle.
      
      Especially for kvm guest with memory > 0xe0000000, there's below in qemu
      code: qemu split memory as below:
      
          if (ram_size >= 0xe0000000 ) {
              above_4g_mem_size = ram_size - 0xe0000000;
              below_4g_mem_size = 0xe0000000;
          } else {
              below_4g_mem_size = ram_size;
          }
      
      So for 4G mem guest, seabios will insert a 512M usable region beyond of
      4G.  Thus in above case max_pfn - min_low_pfn will be more than original
      memsize.
      
      Fixing this issue by using memblock_phys_mem_size() to get the total
      memsize.
      Signed-off-by: NDave Young <dyoung@redhat.com>
      Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com>
      Reviewed-by: NSimon Horman <horms@verge.net.au>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      09c71bfd
    • Z
      kexec: add further check to crashkernel · eaa3be6a
      Zhenzhong Duan 提交于
      When using crashkernel=2M-256M, the kernel doesn't give any warning.  This
      is misleading sometimes.
      Signed-off-by: NZhenzhong Duan <zhenzhong.duan@oracle.com>
      Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      eaa3be6a
    • W
      kexec: crash: don't save swapper_pg_dir for !CONFIG_MMU configurations · d034cfab
      Will Deacon 提交于
      nommu platforms don't have very interesting swapper_pg_dir pointers and
      usually just #define them to NULL, meaning that we can't include them in
      the vmcoreinfo on the kexec crash path.
      
      This patch only saves the swapper_pg_dir if we have an MMU.
      Signed-off-by: NWill Deacon <will.deacon@arm.com>
      Reviewed-by: NSimon Horman <horms@verge.net.au>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d034cfab
    • S
      arch/ia64: remove references to cpu_*_map · 7d7f9848
      Srivatsa S. Bhat 提交于
      This was marked as obsolete for quite a while now..  Now it is time to
      remove it altogether.  And while doing this, get rid of first_cpu() as
      well.  Also, remove the redundant setting of cpu_online_mask in
      smp_prepare_cpus() because the generic code would have already set cpu 0
      in cpu_online_mask.
      Reported-by: NTony Luck <tony.luck@intel.com>
      Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7d7f9848
    • S
      lib/cpumask.c: remove __any_online_cpu() · 38b93780
      Srivatsa S. Bhat 提交于
      __any_online_cpu() is not optimal and also unnecessary.  So, replace its
      use by faster cpumask_* operations.
      Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
      Cc: Eric Dumazet <eric.dumazet@gmail.com>
      Cc: Venkatesh Pallipadi <venki@google.com>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      38b93780
    • G
      mm: only IPI CPUs to drain local pages if they exist · 74046494
      Gilad Ben-Yossef 提交于
      Calculate a cpumask of CPUs with per-cpu pages in any zone and only send
      an IPI requesting CPUs to drain these pages to the buddy allocator if they
      actually have pages when asked to flush.
      
      This patch saves 85%+ of IPIs asking to drain per-cpu pages in case of
      severe memory pressure that leads to OOM since in these cases multiple,
      possibly concurrent, allocation requests end up in the direct reclaim code
      path so when the per-cpu pages end up reclaimed on first allocation
      failure for most of the proceeding allocation attempts until the memory
      pressure is off (possibly via the OOM killer) there are no per-cpu pages
      on most CPUs (and there can easily be hundreds of them).
      
      This also has the side effect of shortening the average latency of direct
      reclaim by 1 or more order of magnitude since waiting for all the CPUs to
      ACK the IPI takes a long time.
      
      Tested by running "hackbench 400" on a 8 CPU x86 VM and observing the
      difference between the number of direct reclaim attempts that end up in
      drain_all_pages() and those were more then 1/2 of the online CPU had any
      per-cpu page in them, using the vmstat counters introduced in the next
      patch in the series and using proc/interrupts.
      
      In the test sceanrio, this was seen to save around 3600 global
      IPIs after trigerring an OOM on a concurrent workload:
      
      $ cat /proc/vmstat | tail -n 2
      pcp_global_drain 0
      pcp_global_ipi_saved 0
      
      $ cat /proc/interrupts | grep CAL
      CAL:          1          2          1          2
                2          2          2          2   Function call interrupts
      
      $ hackbench 400
      [OOM messages snipped]
      
      $ cat /proc/vmstat | tail -n 2
      pcp_global_drain 3647
      pcp_global_ipi_saved 3642
      
      $ cat /proc/interrupts | grep CAL
      CAL:          6         13          6          3
                3          3         1 2          7   Function call interrupts
      
      Please note that if the global drain is removed from the direct reclaim
      path as a patch from Mel Gorman currently suggests this should be replaced
      with an on_each_cpu_cond invocation.
      Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
      Acked-by: NMel Gorman <mel@csn.ul.ie>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Acked-by: NChristoph Lameter <cl@linux.com>
      Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Acked-by: NMichal Nazarewicz <mina86@mina86.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      74046494
    • G
      fs: only send IPI to invalidate LRU BH when needed · 42be35d0
      Gilad Ben-Yossef 提交于
      In several code paths, such as when unmounting a file system (but not
      only) we send an IPI to ask each cpu to invalidate its local LRU BHs.
      
      For multi-cores systems that have many cpus that may not have any LRU BH
      because they are idle or because they have not performed any file system
      accesses since last invalidation (e.g.  CPU crunching on high perfomance
      computing nodes that write results to shared memory or only using
      filesystems that do not use the bh layer.) This can lead to loss of
      performance each time someone switches the KVM (the virtual keyboard and
      screen type, not the hypervisor) if it has a USB storage stuck in.
      
      This patch attempts to only send an IPI to cpus that have LRU BH.
      Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
      Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Alexander Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      42be35d0
    • G
      slub: only IPI CPUs that have per cpu obj to flush · a8364d55
      Gilad Ben-Yossef 提交于
      flush_all() is called for each kmem_cache_destroy().  So every cache being
      destroyed dynamically ends up sending an IPI to each CPU in the system,
      regardless if the cache has ever been used there.
      
      For example, if you close the Infinband ipath driver char device file, the
      close file ops calls kmem_cache_destroy().  So running some infiniband
      config tool on one a single CPU dedicated to system tasks might interrupt
      the rest of the 127 CPUs dedicated to some CPU intensive or latency
      sensitive task.
      
      I suspect there is a good chance that every line in the output of "git
      grep kmem_cache_destroy linux/ | grep '\->'" has a similar scenario.
      
      This patch attempts to rectify this issue by sending an IPI to flush the
      per cpu objects back to the free lists only to CPUs that seem to have such
      objects.
      
      The check which CPU to IPI is racy but we don't care since asking a CPU
      without per cpu objects to flush does no damage and as far as I can tell
      the flush_all by itself is racy against allocs on remote CPUs anyway, so
      if you required the flush_all to be determinstic, you had to arrange for
      locking regardless.
      
      Without this patch the following artificial test case:
      
      $ cd /sys/kernel/slab
      $ for DIR in *; do cat $DIR/alloc_calls > /dev/null; done
      
      produces 166 IPIs on an cpuset isolated CPU. With it it produces none.
      
      The code path of memory allocation failure for CPUMASK_OFFSTACK=y
      config was tested using fault injection framework.
      Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
      Acked-by: NChristoph Lameter <cl@linux.com>
      Cc: Chris Metcalf <cmetcalf@tilera.com>
      Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: Matt Mackall <mpm@selenic.com>
      Cc: Sasha Levin <levinsasha928@gmail.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Alexander Viro <viro@zeniv.linux.org.uk>
      Cc: Avi Kivity <avi@redhat.com>
      Cc: Michal Nazarewicz <mina86@mina86.org>
      Cc: Kosaki Motohiro <kosaki.motohiro@gmail.com>
      Cc: Milton Miller <miltonm@bga.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a8364d55
    • G
      smp: add func to IPI cpus based on parameter func · b3a7e98e
      Gilad Ben-Yossef 提交于
      Add the on_each_cpu_cond() function that wraps on_each_cpu_mask() and
      calculates the cpumask of cpus to IPI by calling a function supplied as a
      parameter in order to determine whether to IPI each specific cpu.
      
      The function works around allocation failure of cpumask variable in
      CONFIG_CPUMASK_OFFSTACK=y by itereating over cpus sending an IPI a time
      via smp_call_function_single().
      
      The function is useful since it allows to seperate the specific code that
      decided in each case whether to IPI a specific cpu for a specific request
      from the common boilerplate code of handling creating the mask, handling
      failures etc.
      
      [akpm@linux-foundation.org: s/gfpflags/gfp_flags/]
      [akpm@linux-foundation.org: avoid double-evaluation of `info' (per Michal), parenthesise evaluation of `cond_func']
      [akpm@linux-foundation.org: s/CPU/CPUs, use all 80 cols in comment]
      Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
      Cc: Chris Metcalf <cmetcalf@tilera.com>
      Cc: Christoph Lameter <cl@linux-foundation.org>
      Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: Matt Mackall <mpm@selenic.com>
      Cc: Sasha Levin <levinsasha928@gmail.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: Alexander Viro <viro@zeniv.linux.org.uk>
      Cc: Avi Kivity <avi@redhat.com>
      Acked-by: NMichal Nazarewicz <mina86@mina86.org>
      Cc: Kosaki Motohiro <kosaki.motohiro@gmail.com>
      Cc: Milton Miller <miltonm@bga.com>
      Reviewed-by: N"Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b3a7e98e
    • G
      smp: introduce a generic on_each_cpu_mask() function · 3fc498f1
      Gilad Ben-Yossef 提交于
      We have lots of infrastructure in place to partition multi-core systems
      such that we have a group of CPUs that are dedicated to specific task:
      cgroups, scheduler and interrupt affinity, and cpuisol= boot parameter.
      Still, kernel code will at times interrupt all CPUs in the system via IPIs
      for various needs.  These IPIs are useful and cannot be avoided
      altogether, but in certain cases it is possible to interrupt only specific
      CPUs that have useful work to do and not the entire system.
      
      This patch set, inspired by discussions with Peter Zijlstra and Frederic
      Weisbecker when testing the nohz task patch set, is a first stab at trying
      to explore doing this by locating the places where such global IPI calls
      are being made and turning the global IPI into an IPI for a specific group
      of CPUs.  The purpose of the patch set is to get feedback if this is the
      right way to go for dealing with this issue and indeed, if the issue is
      even worth dealing with at all.  Based on the feedback from this patch set
      I plan to offer further patches that address similar issue in other code
      paths.
      
      This patch creates an on_each_cpu_mask() and on_each_cpu_cond()
      infrastructure API (the former derived from existing arch specific
      versions in Tile and Arm) and uses them to turn several global IPI
      invocation to per CPU group invocations.
      
      Core kernel:
      
      on_each_cpu_mask() calls a function on processors specified by cpumask,
      which may or may not include the local processor.
      
      You must not call this function with disabled interrupts or from a
      hardware interrupt handler or from a bottom half handler.
      
      arch/arm:
      
      Note that the generic version is a little different then the Arm one:
      
      1. It has the mask as first parameter
      2. It calls the function on the calling CPU with interrupts disabled,
         but this should be OK since the function is called on the other CPUs
         with interrupts disabled anyway.
      
      arch/tile:
      
      The API is the same as the tile private one, but the generic version
      also calls the function on the with interrupts disabled in UP case
      
      This is OK since the function is called on the other CPUs
      with interrupts disabled.
      Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
      Reviewed-by: NChristoph Lameter <cl@linux.com>
      Acked-by: NChris Metcalf <cmetcalf@tilera.com>
      Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: Matt Mackall <mpm@selenic.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: Sasha Levin <levinsasha928@gmail.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Alexander Viro <viro@zeniv.linux.org.uk>
      Cc: Avi Kivity <avi@redhat.com>
      Acked-by: NMichal Nazarewicz <mina86@mina86.org>
      Cc: Kosaki Motohiro <kosaki.motohiro@gmail.com>
      Cc: Milton Miller <miltonm@bga.com>
      Cc: Russell King <linux@arm.linux.org.uk>
      Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3fc498f1
    • H
      swapon: check validity of swap_flags · d15cab97
      Hugh Dickins 提交于
      Most system calls taking flags first check that the flags passed in are
      valid, and that helps userspace to detect when new flags are supported.
      
      But swapon never did so: start checking now, to help if we ever want to
      support more swap_flags in future.
      
      It's difficult to get stray bits set in an int, and swapon is not widely
      used, so this is most unlikely to break any userspace; but we can just
      revert if it turns out to do so.
      Signed-off-by: NHugh Dickins <hughd@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d15cab97
    • D
      mm, coredump: fail allocations when coredumping instead of oom killing · 29fd66d2
      David Rientjes 提交于
      The size of coredump files is limited by RLIMIT_CORE, however, allocating
      large amounts of memory results in three negative consequences:
      
       - the coredumping process may be chosen for oom kill and quickly deplete
         all memory reserves in oom conditions preventing further progress from
         being made or tasks from exiting,
      
       - the coredumping process may cause other processes to be oom killed
         without fault of their own as the result of a SIGSEGV, for example, in
         the coredumping process, or
      
       - the coredumping process may result in a livelock while writing to the
         dump file if it needs memory to allocate while other threads are in
         the exit path waiting on the coredumper to complete.
      
      This is fixed by implying __GFP_NORETRY in the page allocator for
      coredumping processes when reclaim has failed so the allocations fail and
      the process continues to exit.
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Minchan Kim <minchan.kim@gmail.com>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      29fd66d2
    • A
      mm: thp: fix up pmd_trans_unstable() locations · 45f83cef
      Andrea Arcangeli 提交于
      pmd_trans_unstable() should be called before pmd_offset_map() in the
      locations where the mmap_sem is held for reading.
      Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Larry Woodman <lwoodman@redhat.com>
      Cc: Ulrich Obergfell <uobergfe@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mark Salter <msalter@redhat.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      45f83cef