MIPS KVM uses its own variation of get_new_mmu_context() which takes an
extra vcpu pointer (unused) and does exactly the same thing.

Switch to just using get_new_mmu_context() directly and drop KVM's
version of it as it doesn't really serve any purpose.

The nearby declarations of kvm_mips_alloc_new_mmu_context(),
kvm_mips_vcpu_load() and kvm_mips_vcpu_put() are also removed from
kvm_host.h, as no definitions or users exist.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

When exceptions are injected into the MIPS KVM guest, the whole host TLB
is flushed (except any entries in the guest KSeg0 range). This is
certainly not mandated by the architecture when exceptions are taken
(userland can't directly change TLB mappings anyway), and is a pretty
heavyweight operation:

 - There may be hundreds of TLB entries especially when a 512 entry FTLB
   is present. These are walked and read and conditionally invalidated,
   so the TLBINV feature can't be used either.

 - It'll indiscriminately wipe out entries belonging to other memory
   spaces. A simple ASID regeneration would be much faster to perform,
   although it'd wipe out the guest KSeg0 mappings too.

My suspicion is that this was simply to plaster over the fact that
kvm_mips_host_tlb_inv() incorrectly only invalidated TLB entries in the
ASID for guest usermode, and not the ASID for guest kernelmode.

Now that the recent commit "KVM: MIPS/TLB: Flush host TLB entry in
kernel ASID" fixes kvm_mips_host_tlb_inv() to flush TLB entries in the
kernelmode ASID when the guest TLB changes, lets drop these calls and
the otherwise unused kvm_mips_flush_host_tlb().
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Now that KVM no longer uses wired entries we can safely use
local_flush_tlb_all() when we need to flush the entire TLB (on the start
of a new ASID cycle). This doesn't flush wired entries, which allows
other code to use them without KVM clobbering them all the time. It also
is more up to date, knowing about the tlbinv architectural feature,
flushing of micro TLB on cores where that is necessary (Loongson I
believe), and knows to stop the HTW while doing so.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Use protected_writeback_dcache_line() instead of flush_dcache_line(),
and protected_flush_icache_line() instead of flush_icache_line(), so
that CACHEE (the EVA variant) is used on EVA host kernels.

Without this, guest floating point branch delay slot emulation via a
trampoline on the user stack fails on EVA host kernels due to failure of
the icache sync, resulting in the break instruction getting skipped and
execution from the stack.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Now that we have GVA page tables, use standard user accesses with page
faults disabled to read & modify guest instructions. This should be more
robust (than the rather dodgy method of accessing guest mapped segments
by just directly addressing them) and will also work with Enhanced
Virtual Addressing (EVA) host kernel configurations where dedicated
instructions are needed for accessing user mode memory.

For simplicity and speed we do this regardless of the guest segment the
address resides in, rather than handling guest KSeg0 specially with
kmap_atomic() as before.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Now that the commpage doesn't use wired TLB entries, the per-CPU
vm_init() callback is the only work done by kvm_mips_init_vm_percpu().

The trap & emulate implementation doesn't actually need to do anything
from vm_init(), and the future VZ implementation would be better served
by a kvm_arch_hardware_enable callback anyway.

Therefore drop the vm_init() callback entirely, allowing the
kvm_mips_init_vm_percpu() function to also be dropped, along with the
kvm_mips_instance atomic counter.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Now that we have GVA page tables and an optimised TLB refill handler in
place, convert the handling of commpage faults from the guest kernel to
fill the GVA page table and invalidate the TLB entry, rather than
filling the wired TLB entry directly.

For simplicity we no longer use a wired entry for the commpage (refill
should be much cheaper with the fast-path handler anyway). Since we
don't need to manipulate the TLB directly any longer, move the function
from tlb.c to mmu.c. This puts it closer to the similar functions
handling KSeg0 and TLB mapped page faults from the guest.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Now that we have GVA page tables and an optimised TLB refill handler in
place, convert the handling of page faults in TLB mapped segment from
the guest to fill a single GVA page table entry and invalidate the TLB
entry, rather than filling a TLB entry pair directly.

Also remove the now unused kvm_mips_get_{kernel,user}_asid() functions
in mmu.c and kvm_mips_host_tlb_write() in tlb.c.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Now that we have GVA page tables and an optimised TLB refill handler in
place, convert the handling of KSeg0 page faults from the guest to fill
the GVA page tables and invalidate the TLB entry, rather than filling a
TLB entry directly.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Implement invalidation of specific pairs of GVA page table entries in
one or both of the GVA page tables. This is used when existing mappings
are replaced in the guest TLB by emulated TLBWI/TLBWR instructions. Due
to the sharing of page tables in the host kernel range, we should be
careful not to allow host pages to be invalidated.

Add a helper kvm_mips_walk_pgd() which can be used when walking of
either GPA (future patches) or GVA page tables is needed, optionally
with allocation of page tables along the way when they don't exist.

GPA page table walking will need to be protected by the kvm->mmu_lock,
so we also add a small MMU page cache in each KVM VCPU, like that found
for other architectures but smaller. This allows enough pages to be
pre-allocated to handle a single fault without holding the lock,
allowing the helper to run with the lock held without having to handle
allocation failures.

Using the same mechanism for GVA allows the same code to be used, and
allows it to use the same cache of allocated pages if the GPA walk
didn't need to allocate any new tables.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Implement invalidation of large ranges of virtual addresses from GVA
page tables in response to a guest ASID change (immediately for guest
kernel page table, lazily for guest user page table).

We iterate through a range of page tables invalidating entries and
freeing fully invalidated tables. To minimise overhead the exact ranges
invalidated depends on the flags argument to kvm_mips_flush_gva_pt(),
which also allows it to be used in future KVM_CAP_SYNC_MMU patches in
response to GPA changes, which unlike guest TLB mapping changes affects
guest KSeg0 mappings.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Refactor kvm_mips_host_tlb_inv() to also be able to invalidate any
matching TLB entry in the kernel ASID rather than assuming only the TLB
entries in the user ASID can change. Two new bool user/kernel arguments
allow the caller to indicate whether the mapping should affect each of
the ASIDs for guest user/kernel mode.

- kvm_mips_invalidate_guest_tlb() (used by TLBWI/TLBWR emulation) can
  now invalidate any corresponding TLB entry in both the kernel ASID
  (guest kernel may have accessed any guest mapping), and the user ASID
  if the entry being replaced is in guest USeg (where guest user may
  also have accessed it).

- The tlbmod fault handler (and the KSeg0 / TLB mapped / commpage fault
  handlers in later patches) can now invalidate the corresponding TLB
  entry in whichever ASID is currently active, since only a single page
  table will have been updated anyway.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

kvm_mips_host_tlb_inv() uses the TLBP instruction to probe the host TLB
for an entry matching the given guest virtual address, and determines
whether a match was found based on whether CP0_Index > 0. This is
technically incorrect as an index of 0 (with the high bit clear) is a
perfectly valid TLB index.

This is harmless at the moment due to the use of at least 1 wired TLB
entry for the KVM commpage, however we will soon be ridding ourselves of
that particular wired entry so lets fix the condition in case the entry
needing invalidation does land at TLB index 0.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Use functions from the general MIPS TLB exception vector generation code
(tlbex.c) to construct a fast path TLB refill handler similar to the
general one, but cut down and capable of preserving K0 and K1.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

tlbex.c uses the implementation dependent $22 CP0 register group on
NetLogic cores, with the help of the c0_kscratch() helper. Allow these
registers to be allocated by the KVM entry code too instead of assuming
KScratch registers are all $31, which will also allow pgd_reg to be
handled since it is allocated that way.

We also drop the masking of kscratch_mask with 0xfc, as it is redundant
for the standard KScratch registers (Config4.KScrExist won't have the
low 2 bits set anyway), and apparently not necessary for NetLogic.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Activate the GVA page tables when in guest context. This will allow the
normal Linux TLB refill handler to fill from it when guest memory is
read, as well as preventing accidental reading from user memory.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Allocate GVA -> HPA page tables for guest kernel and guest user mode on
each VCPU, to allow for fast path TLB refill handling to be added later.

In the process kvm_arch_vcpu_init() needs updating to pass on any error
from the vcpu_init() callback.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Wire up a vcpu uninit implementation callback. This will be used for the
clean up of GVA->HPA page tables.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Set init_mm as the active_mm and update mm_cpumask(current->mm) to
reflect that it isn't active when in guest context. This prevents cache
management code from attempting cache flushes on host virtual addresses
while in guest context, for example due to a cache management IPIs or
later when writing of dynamically translated code hits copy on write.

We do this using helpers in static kernel code to avoid having to export
init_mm to modules.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

We only need the guest ASID loaded while in guest context, i.e. while
running guest code and while handling guest exits. We load the guest
ASID when entering the guest, however we restore the host ASID later
than necessary, when the VCPU state is saved i.e. vcpu_put() or slightly
earlier if preempted after returning to the host.

This mismatch is both unpleasant and causes redundant host ASID restores
in kvm_trap_emul_vcpu_put(). Lets explicitly restore the host ASID when
returning to the host, and don't bother restoring the host ASID on
context switch in unless we're already in guest context.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Add implementation callbacks for entering the guest (vcpu_run()) and
reentering the guest (vcpu_reenter()), allowing implementation specific
operations to be performed before entering the guest or after returning
to the host without cluttering kvm_arch_vcpu_ioctl_run().

This allows the T&E specific lazy user GVA flush to be moved into
trap_emul.c, along with disabling of the HTW. We also move
kvm_mips_deliver_interrupts() as VZ will need to restore the guest timer
state prior to delivering interrupts.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

The kvm_vcpu_arch structure contains both mm_structs for allocating MMU
contexts (primarily the ASID) but it also copies the resulting ASIDs
into guest_{user,kernel}_asid[] arrays which are referenced from uasm
generated code.

This duplication doesn't seem to serve any purpose, and it gets in the
way of generalising the ASID handling across guest kernel/user modes, so
lets just extract the ASID straight out of the mm_struct on demand, and
in fact there are convenient cpu_context() and cpu_asid() macros for
doing so.

To reduce the verbosity of this code we do also add kern_mm and user_mm
local variables where the kernel and user mm_structs are used.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

The MIPS KVM host and guest GVA ASIDs may need regenerating when
scheduling a process in guest context, which is done from the
kvm_arch_vcpu_load() / kvm_arch_vcpu_put() functions in mmu.c.

However this is a fairly implementation specific detail. VZ for example
may use GuestIDs instead of normal ASIDs to distinguish mappings
belonging to different guests, and even on VZ without GuestID the root
TLB will be used differently to trap & emulate.

Trap & emulate GVA ASIDs only relate to the user part of the full
address space, so can be left active during guest exit handling (guest
context) to allow guest instructions to be easily read and translated.

VZ root ASIDs however are for GPA mappings so can't be left active
during normal kernel code. They also aren't useful for accessing guest
virtual memory, and we should have CP0_BadInstr[P] registers available
to provide encodings of trapping guest instructions anyway.

Therefore move the ASID preemption handling into the implementation
callback.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Convert the get_regs() and set_regs() callbacks to vcpu_load() and
vcpu_put(), which provide a cpu argument and more closely match the
kvm_arch_vcpu_load() / kvm_arch_vcpu_put() that they are called by.

This is in preparation for moving ASID management into the
implementations.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

KVM T&E uses an ASID for guest kernel mode and an ASID for guest user
mode. The current ASID is saved when the guest is scheduled out, and
restored when scheduling back in, with checks for whether the ASID needs
to be regenerated.

This isn't really necessary as the ASID can be easily determined by the
current guest mode, so lets simplify it to just read the required ASID
from guest_kernel_asid or guest_user_asid even if the ASID hasn't been
regenerated.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

MIPS incompletely implements the KVM_NMI ioctl to supposedly perform a
CPU reset, but all it actually does is invalidate the ASIDs. It doesn't
expose the KVM_CAP_USER_NMI capability which is supposed to indicate the
presence of the KVM_NMI ioctl, and no user software actually uses it on
MIPS.

Since this is dead code that would technically need updating for GVA
page table handling in upcoming patches, remove it now. If we wanted to
implement NMI injection later it can always be done properly along with
the KVM_CAP_USER_NMI capability, and if we wanted to implement a proper
CPU reset it would be better done with a separate ioctl.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Merge in MIPS prerequisites from GVA page tables and GPA page tables
series. The same branch can also merge into the MIPS tree.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

The protected cache ops contain no out of line fixup code to return an
error code in the event of a fault, with the cache op being skipped in
that case. For KVM however we'd like to detect this case as page
faulting will be disabled so it could happen during normal operation if
the GVA page tables were flushed, and need to be handled by the caller.

Add the out-of-line fixup code to load the error value -EFAULT into the
return variable, and adapt the protected cache line functions to pass
the error back to the caller.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Export to TLB exception code generating functions so that KVM can
construct a fast TLB refill handler for guest context without
reinventing the wheel quite so much.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Add include guards in asm/uasm.h to allow it to be safely used by a new
header asm/tlbex.h in the next patch to expose TLB exception building
functions for KVM to use.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Export pmd_init(), invalid_pmd_table and tlbmiss_handler_setup_pgd to
GPL kernel modules so that MIPS KVM can use the inline page table
management functions and switch between page tables:

- pmd_init() will be used directly by KVM to initialise newly allocated
  pmd tables with invalid lower level table pointers.

- invalid_pmd_table is used by pud_present(), pud_none(), and
  pud_clear(), which KVM will use to test and clear pud entries.

- tlbmiss_handler_setup_pgd() will be called by KVM entry code to switch
  to the appropriate GVA page tables.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

pgd_alloc() references init_mm which is not exported to modules. In
order for KVM to be able to use pgd_alloc() to allocate GVA page tables,
move pgd_alloc() into a new pgtable.c file and export it to modules.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

* Return directly after a call of the function "copy_from_user" failed
  in a case block.

* Delete the jump label "out" which became unnecessary with
  this refactoring.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

This reverts commit bc613494.

A CPUID instruction executed in VMX non-root mode always causes a
VM-exit, regardless of the leaf being queried.

Fixes: bc613494 ("KVM: nested VMX: disable perf cpuid reporting")
Signed-off-by: NJim Mattson <jmattson@google.com>
[The issue solved by bc613494 has been resolved with ff651cb6
 ("KVM: nVMX: Add nested msr load/restore algorithm").]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Vector population count instructions for dwords and qwords are to be
used in future Intel Xeon & Xeon Phi processors. The bit 14 of
CPUID[level:0x07, ECX] indicates that the new instructions are
supported by a processor.

The spec can be found in the Intel Software Developer Manual (SDM)
or in the Instruction Set Extensions Programming Reference (ISE).
Signed-off-by: NPiotr Luc <piotr.luc@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

For AVX512_VPOPCNTDQ.

Vector population count instructions for dwords and qwords are going to be
available in future Intel Xeon & Xeon Phi processors. Bit 14 of
CPUID[level:0x07, ECX] indicates that the instructions are supported by a
processor.

The specification can be found in the Intel Software Developer Manual (SDM)
and in the Instruction Set Extensions Programming Reference (ISE).

Populate the feature bit and clear it when xsave is disabled.
Signed-off-by: NPiotr Luc <piotr.luc@intel.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář <rkrcmar@redhat.com>
Link: http://lkml.kernel.org/r/20170110173403.6010-2-piotr.luc@intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Pull namespace fixes from Eric Biederman:
 "This tree contains 4 fixes.

  The first is a fix for a race that can causes oopses under the right
  circumstances, and that someone just recently encountered.

  Past that are several small trivial correct fixes. A real issue that
  was blocking development of an out of tree driver, but does not appear
  to have caused any actual problems for in-tree code. A potential
  deadlock that was reported by lockdep. And a deadlock people have
  experienced and took the time to track down caused by a cleanup that
  removed the code to drop a reference count"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  sysctl: Drop reference added by grab_header in proc_sys_readdir
  pid: fix lockdep deadlock warning due to ucount_lock
  libfs: Modify mount_pseudo_xattr to be clear it is not a userspace mount
  mnt: Protect the mountpoint hashtable with mount_lock

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc driver fixes for 4.10-rc4 that resolve
  some reported issues.

  The MEI driver issue resolves a lot of problems that people have been
  having, as does the mem driver fix. The other minor fixes resolve
  other reported issues.

  All of these have been in linux-next for a while"

* tag 'char-misc-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  vme: Fix wrong pointer utilization in ca91cx42_slave_get
  auxdisplay: fix new ht16k33 build errors
  ppdev: don't print a free'd string
  extcon: return error code on failure
  drivers: char: mem: Fix thinkos in kmem address checks
  mei: bus: enable OS version only for SPT and newer