All functions of HIP09's ROCEE share on-chip resources for all QPs, the
driver needs configure the resource index and number for each function
during the init stage.

Link: https://lore.kernel.org/r/1622541427-42193-1-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The capbability configurations of PFs and VFs are coupled. Decoupling them
by abstracting some functions and reorganizing the configuration process.

Link: https://lore.kernel.org/r/1621860428-58009-1-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The CRQ of CMDQ is unused, so remove code about it.

Link: https://lore.kernel.org/r/1621482876-35780-3-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The timeout link table works in HIP08 ES version and the hns driver only
support the CS version for HIP08, so delete the related code. Then
simplify the buffer allocation for link table to make the code more
readable.

Link: https://lore.kernel.org/r/1621481751-27375-1-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Remove duplicated code for setting hem page size in PF and VF.

Link: https://lore.kernel.org/r/1617715514-29039-7-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Introduce the VF support by adding code changes to allow VF PCI device
initialization, assgining the reserved resource of the PF to the active
VFs, setting the default abilities, applying the interruptions, resetting
and reducing the default QP/GID number to aovid exceeding the hardware
limitation.

Link: https://lore.kernel.org/r/1617715514-29039-6-git-send-email-liweihang@huawei.comSigned-off-by: NWei Xu <xuwei5@hisilicon.com>
Signed-off-by: NShengming Shu <shushengming1@huawei.com>
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Query the resource including EQC/SMAC/SGID from the firmware in the PF and
distribute fairly among all the functions belong to the PF.

Link: https://lore.kernel.org/r/1617715514-29039-4-git-send-email-liweihang@huawei.comSigned-off-by: NWei Xu <xuwei5@hisilicon.com>
Signed-off-by: NShengming Shu <shushengming1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Query how many functions are supported by the PF from the FW and store it
in the hns_roce_dev structure which will be used to support the
configuration of virtual functions.

Link: https://lore.kernel.org/r/1617715514-29039-3-git-send-email-liweihang@huawei.comSigned-off-by: NWei Xu <xuwei5@hisilicon.com>
Signed-off-by: NShengming Shu <shushengming1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Use hr_reg_write/read() to simplify codes about configuring function's
resource. And because the design of PF/VF fields is same, they can be
defined only once.

Link: https://lore.kernel.org/r/1617715514-29039-2-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Use "hr_reg_write" replace "roce_set_filed".

Link: https://lore.kernel.org/r/1617354454-47840-9-git-send-email-liweihang@huawei.comSigned-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

A field to distuiguish basic SRQ from XRC SRQ in SRQC and a field in QPC
to determine whether a QP is XRC TGT QP or XRC INI QP are missing.

Fixes: 32548870 ("RDMA/hns: Add support for XRC on HIP09")
Link: https://lore.kernel.org/r/1617354454-47840-8-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The hardware supports only two types of abnormal interrupts.

Fixes: a5073d60 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/1617354454-47840-5-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Add error code definition according to the return code from firmware to
help find out more detailed reasons why a command fails to be sent.

Link: https://lore.kernel.org/r/1617262341-37571-3-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The doorbell update interfaces are very similar for different queues, such
as SQ, RQ, SRQ, CQ and EQ. So reorganize these code and also fix some
inappropriate naming.

Link: https://lore.kernel.org/r/1616840738-7866-3-git-send-email-liweihang@huawei.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Use hr_reg_write() instead of roce_set_field() to simplify codes about
configuring HEM BA.

Link: https://lore.kernel.org/r/1616815294-13434-6-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The 'HNS_ROCE_OPC_QUERY_MB_ST' command will response the mailbox complete
status and hardware busy flag, and the complete status is only valid when
the busy flag is 0, so it's better to query these two fields at a time
rather than separately.

Link: https://lore.kernel.org/r/1616815294-13434-4-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The type of congestion control algorithm includes DCQCN, LDCP, HC3 and
DIP. The driver will select one of them according to the firmware when
querying PF capabilities, and then set the related configuration fields
into QPC.

Link: https://lore.kernel.org/r/1616679236-7795-3-git-send-email-liweihang@huawei.comSigned-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Add a new type of command to query mac id of functions from the firmware,
it is used to select the template of congestion algorithm. More info will
be supported in the future.

Link: https://lore.kernel.org/r/1616679236-7795-2-git-send-email-liweihang@huawei.comSigned-off-by: NWei Xu <xuwei5@hisilicon.com>
Signed-off-by: NShengming Shu <shushengming1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The HIP09 supports XRC transport service, it greatly saves the number of
QPs required to connect all processes in a large cluster.

Link: https://lore.kernel.org/r/1614826558-35423-1-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

FRMR is not well-supported on HIP08, it is re-designed for HIP09 and the
position of related fields is changed. Then the ULPs should be forbidden
to use FRMR on older hardwares.

Link: https://lore.kernel.org/r/1612924424-28217-1-git-send-email-liweihang@huawei.comSigned-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The register 0x07014 is actually the head pointer of CMDQ, and 0x07010
means tail pointer. Current definitions are confusing, so rename them and
related variables.

The next_to_use of structure hns_roce_v2_cmq_ring has the same semantics
as head, merge them into one member. The next_to_clean of structure
hns_roce_v2_cmq_ring has the same semantics as tail. After deleting
next_to_clean, tail should also be deleted.

Link: https://lore.kernel.org/r/1612688143-28226-5-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

CMDQ works serially, after each successful transmission, the head and tail
pointers will be equal, so there is no need to check whether the queue is
full. At the same time, since the descriptor of each transmission is new,
there is no need to perform a cleanup operation. Then, the field named
next_to_clean in structure hns_roce_v2_cmq_ring is redundant.

Fixes: a04ff739 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1612688143-28226-4-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

last_status of structure hns_roce_v2_cmq has never been used, and the
variable named 'complete' in __hns_roce_cmq_send() is meaningless.

Fixes: a04ff739 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1612688143-28226-2-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Direct wqe is a mechanism to fill wqe directly into the hardware. In the
case of light load, the wqe will be filled into pcie bar space of the
hardware, this will reduce one memory access operation and therefore
reduce the latency.

Link: https://lore.kernel.org/r/1611997513-27107-1-git-send-email-liweihang@huawei.comSigned-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Use new register operation interfaces to simplify the process of write SRQ
Context.

Link: https://lore.kernel.org/r/1611997090-48820-9-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The RQ/SRQ of HIP08 needs one special sge to stop receive reliably. So the
driver needs to allocate at least one SGE when creating RQ/SRQ and ensure
that at least one SGE is filled with the special value during post_recv.

Besides, the kernel driver should only do this for kernel ULP. For
userspace ULP, the userspace driver will allocate the reserved SGE in
buffer, and the kernel driver just needs to pin the corresponding size of
memory based on the userspace driver's requirements.

Link: https://lore.kernel.org/r/1611997090-48820-2-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Achieve hr_reg_write() to simply the codes to fill fields.

Link: https://lore.kernel.org/r/1611395282-991-4-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Just format the code without modifying anything, including fixing some
redundant and missing blanks and spaces and changing the variable
definition order.

Link: https://lore.kernel.org/r/1607650657-35992-8-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Stash is a mechanism that uses the core information carried by the ARM AXI
bus to access the L3 cache. It can be used to improve the performance by
increasing the hit ratio of L3 cache. QPs need to enable stash by default.

Link: https://lore.kernel.org/r/1606374251-21512-3-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Stash is a mechanism that uses the core information carried by the ARM AXI
bus to access the L3 cache. It can be used to improve the performance by
increasing the hit ratio of L3 cache. CQs need to enable stash by default.

Link: https://lore.kernel.org/r/1606374251-21512-2-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

There are some codes can be simplified or encapsulated in set_ud_wqe() to
make them easier to be understand.

Link: https://lore.kernel.org/r/1605526408-6936-6-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

This field in UD WQE in not used by hardware.

Fixes: 7bdee415 ("RDMA/hns: Fill sq wqe context of ud type in hip08")
Link: https://lore.kernel.org/r/1605526408-6936-5-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The SRQ capacity is got from the firmware, whose field should be ended at
bit 19.

Fixes: ba6bb7e9 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1606382812-23636-1-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Add a interface to fill GMV(SGID/SMAC/VLAN) table for HIP09, all of above
source address information is stored as an entry in GMV table. The users
just need to provide the index to the hardware when POST SEND.

Link: https://lore.kernel.org/r/1603508836-33054-3-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

HIP09 supports to store SGID/SMAC/VLAN together in a table named GMV. The
driver needs to allocate memory for it and tell the information about this
region to hardware.

Link: https://lore.kernel.org/r/1603508836-33054-2-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

HIP08 supports RC inline up to size of 32 Bytes, and all data should be
put into SQWQE. For HIP09, this capability is extended to 1024 Bytes, if
length of data is longer than 32 Bytes, they will be filled into extended
sge space.

Link: https://lore.kernel.org/r/1599744069-9968-1-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

According to the RoCE v1 specification, the sl (service level) 0-7 are
mapped directly to priorities 0-7 respectively, sl 8-15 are reserved. The
driver should verify whether the the value of sl is larger than 7, if so,
an exception should be returned.

Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1600509802-44382-5-git-send-email-liweihang@huawei.comSigned-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

For HIP09, size of SCCC (Soft Congestion Control Context) is increased to
64 Bytes from 32 Bytes. The hardware will get the configuration of SCCC
from driver instead of using a fixed value.

Link: https://lore.kernel.org/r/1600245806-56321-5-git-send-email-liweihang@huawei.comSigned-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The new version of RoCEE supports using QPC in size of 256B or 512B, so
that HIP09 can supports new congestion control algorithms by using QPC in
larger size.

Link: https://lore.kernel.org/r/1600245806-56321-4-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The new version of RoCEE supports using CQE in size of 32B or 64B. The
performance of bus can be improved by using larger size of CQE.

Link: https://lore.kernel.org/r/1600245806-56321-3-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>