- 16 1月, 2020 1 次提交
-
-
由 Weihang Li 提交于
In struct hns_roce_caps, max_srq_sg and max_srqwqes is unused, and max_srqs has the same effect with num_srqs. So remove them from this structrue. Link: https://lore.kernel.org/r/1578738761-3176-2-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 14 1月, 2020 14 次提交
-
-
由 Jason Gunthorpe 提交于
The writer for async_file holds the ucontext_lock, while the readers are left unlocked. Most readers rely on an implicit locking, either by having a uobject (which cannot be created before a context) or by holding the ib_ufile kref. However ib_uverbs_free_hw_resources() has no implicit lock and has a possible race. Make this all clear and sane by using READ_ONCE consistently. Link: https://lore.kernel.org/r/1578504126-9400-15-git-send-email-yishaih@mellanox.comSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
This makes async events aligned with completion events as both are full uobjects of FD type and use the same uobject lifecycle. A bunch of duplicate code is consolidated and the general flow between the two FDs is now very similar. Link: https://lore.kernel.org/r/1578504126-9400-14-git-send-email-yishaih@mellanox.comSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
Now that all callers provide a non-NULL attrs the ufile is redundant. Adjust things so that the context handling is done inside alloc_uobj, and the ib_uverbs_get_ucontext_file() is avoided if we already have the context. Link: https://lore.kernel.org/r/1578504126-9400-13-git-send-email-yishaih@mellanox.comSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
This function works on an ib_uverbs_async_file. Accept that as a parameter instead of the struct ib_uverbs_file. Consoldiate all the callers working from an ib_uevent_object to a single function and locate the async_file directly from the struct ib_uobject instead of using context_ptr. Link: https://lore.kernel.org/r/1578504126-9400-11-git-send-email-yishaih@mellanox.comSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
This is a struct ib_uwq_object pointer, instead of using container_of() all over the place just store it with its actual type. Link: https://lore.kernel.org/r/1578504126-9400-10-git-send-email-yishaih@mellanox.comSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
This is a struct ib_usrq_object pointer, instead of using container_of() all over the place just store it with its actual type. Link: https://lore.kernel.org/r/1578504126-9400-9-git-send-email-yishaih@mellanox.comSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
This is a struct ib_uqp_object pointer, instead of using container_of() all over the place just store it with its actual type. Link: https://lore.kernel.org/r/1578504126-9400-8-git-send-email-yishaih@mellanox.comSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
This is a struct ib_ucq_object pointer, instead of using container_of() all over the place just store it with its actual type. Link: https://lore.kernel.org/r/1578504126-9400-7-git-send-email-yishaih@mellanox.comSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
Any uobject that sends events into the async_event_file should be using ib_uevent_object so it can use the standard uevent based helper functions. CQ pushes events into both the async_event and the comp_channel in an open coded way. Move the async events related stuff to ib_uevent_object. Link: https://lore.kernel.org/r/1578504126-9400-6-git-send-email-yishaih@mellanox.comSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
This is a left over from an earlier version that creates a lot of complexity for error unwind, particularly for FD uobjects. The only reason this was done is so that anon_inode_get_file() could be called with the final fops and a fully setup uobject. Both need to be setup since unwinding anon_inode_get_file() via fput will call the driver's release(). Now that the driver does not provide release, we no longer need to worry about this complicated sequence, simply create the struct file at the start and allow the core code's release function to deal with the abort case. This allows all the confusing error paths around commit to be removed. Link: https://lore.kernel.org/r/1578504126-9400-5-git-send-email-yishaih@mellanox.comSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
With the new FD structure the async commands do not need to hold any references while running. The existing mlx5_cmd_exec_cb() and mlx5_cmd_cleanup_async_ctx() provide enough synchronization to ensure that all outstanding commands are completed before the uobject can be destructed. Remove the now confusing get_file() and the type erasure of the devx_async_cmd_event_file. Link: https://lore.kernel.org/r/1578504126-9400-4-git-send-email-yishaih@mellanox.comSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
FD uobjects have a weird split between the struct file and uobject world. Simplify this to make them pure uobjects and use a generic release method for all struct file operations. This fixes the control flow so that mlx5_cmd_cleanup_async_ctx() is always called before erasing the linked list contents to make the concurrancy simpler to understand. For this to work the uobject destruction must fence anything that it is cleaning up - the design must not rely on struct file lifetime. Only deliver_event() relies on the struct file to when adding new events to the queue, add a is_destroyed check under lock to block it. Link: https://lore.kernel.org/r/1578504126-9400-3-git-send-email-yishaih@mellanox.comSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
dispatch_event_fd() runs from a notifier with minimal locking, and relies on RCU and a file refcount to keep the uobject and eventfd alive. As the next patch wants to remove the file_operations release function from the drivers, re-organize things so that the devx_event_notifier() path uses the existing RCU to manage the lifetime of the uobject and eventfd. Move the refcount puts to a call_rcu so that the objects are guaranteed to exist and remove the indirect file refcount. Link: https://lore.kernel.org/r/1578504126-9400-2-git-send-email-yishaih@mellanox.comSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
After device disassociation the uapi_objects are destroyed and freed, however it is still possible that core code can be holding a kref on the uobject. When it finally goes to uverbs_uobject_free() via the kref_put() it can trigger a use-after-free on the uapi_object. Since needs_kfree_rcu is a micro optimization that only benefits file uobjects, just get rid of it. There is no harm in using kfree_rcu even if it isn't required, and the number of involved objects is small. Link: https://lore.kernel.org/r/20200113143306.GA28717@ziepe.caSigned-off-by: NMichael Guralnik <michaelgur@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 13 1月, 2020 4 次提交
-
-
由 Yishai Hadas 提交于
Add mmap support for VAR, it uses the 'offset' command mode with involvement of IB core APIs to find the previously allocated mmap entry. Link: https://lore.kernel.org/r/20191212110928.334995-6-leon@kernel.orgSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Yishai Hadas 提交于
Introduce VAR object and its alloc/destroy KABI methods. The internal implementation uses the IB core API to manage mmap/munamp calls. Link: https://lore.kernel.org/r/20191212110928.334995-5-leon@kernel.orgSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Yishai Hadas 提交于
Extend caps stage to handle VAR capabilities. Link: https://lore.kernel.org/r/20191212110928.334995-4-leon@kernel.orgSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
From the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Merged due to dependencies in the next patches. * branch 'mlx5_vdpa': net/mlx5: Expose vDPA emulation device capabilities net/mlx5: Add Virtio Emulation related device capabilities
-
- 11 1月, 2020 2 次提交
-
-
由 Yishai Hadas 提交于
Expose vDPA emulation device capabilities from the core layer. It includes reading the capabilities from the firmware and exposing helper functions to access the data. Signed-off-by: NYishai Hadas <yishaih@mellanox.com> Reviewed-by: NShahaf Shuler <shahafs@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
-
由 Yishai Hadas 提交于
Add Virtio Emulation related fields to the device capabilities. It includes a general bit to indicate whether Virtio Emulation is supported and the capabilities structure itself. Signed-off-by: NYishai Hadas <yishaih@mellanox.com> Reviewed-by: NShahaf Shuler <shahafs@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
-
- 10 1月, 2020 13 次提交
-
-
由 Guoqing Jiang 提交于
Since we can return device->ops.query_port directly, so no need to keep those lines. Link: https://lore.kernel.org/r/20200109134043.15568-1-guoqing.jiang@cloud.ionos.comSigned-off-by: NGuoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Xi Wang 提交于
When hardware is in resetting stage, we may can't poll back all the expected work completions as the hardware won't generate cqe anymore. This patch allows the driver to compose the expected wc instead of the hardware during resetting stage. Once the hardware finished resetting, we can poll cq from hardware again. Link: https://lore.kernel.org/r/1578572412-25756-1-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com> Signed-off-by: NWeihang Li <liweihang@huawei.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Lijun Ou 提交于
Driver should first check whether the sge is valid, then fill the valid sge and the caculated total into hardware, otherwise invalid sges will cause an error. Fixes: 52e3b42a ("RDMA/hns: Filter for zero length of sge in hip08 kernel mode") Fixes: 7bdee415 ("RDMA/hns: Fill sq wqe context of ud type in hip08") Link: https://lore.kernel.org/r/1578571852-13704-1-git-send-email-liweihang@huawei.comSigned-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NWeihang Li <liweihang@huawei.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Mike Marciniszyn 提交于
This counter, RxShrErr, is required for error analysis and debug. Fixes: 77241056 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20200106134235.119356.29123.stgit@awfm-01.aw.intel.comReviewed-by: NKaike Wan <kaike.wan@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Mike Marciniszyn 提交于
All other code paths increment some form of drop counter. This was missed in the original implementation. Fixes: 82c2611d ("staging/rdma/hfi1: Handle packets with invalid RHF on context 0") Link: https://lore.kernel.org/r/20200106134228.119356.96828.stgit@awfm-01.aw.intel.comReviewed-by: NKaike Wan <kaike.wan@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Grzegorz Andrejczuk 提交于
Packet receiving functions returns int value, and yet the return values are not used at all. This patch converts the functions to return void. Link: https://lore.kernel.org/r/20200106134222.119356.84098.stgit@awfm-01.aw.intel.comReviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NGrzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Signed-off-by: NKaike Wan <kaike.wan@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Grzegorz Andrejczuk 提交于
IRQ name was connected to IRQ type, this is not sufficient and it would be better to use name as argument to msix_request_irq instead of assigning it to variables when function is called. Index argument was required to generate name and now it can be removed. To generate name correctly helpers function were added and updated. Link: https://lore.kernel.org/r/20200106134216.119356.44478.stgit@awfm-01.aw.intel.comReviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: NGrzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Signed-off-by: NKaike Wan <kaike.wan@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Mike Marciniszyn 提交于
Add an auto activate routine for use by the interrupt handler. Link: https://lore.kernel.org/r/20200106134210.119356.43079.stgit@awfm-01.aw.intel.comReviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NKaike Wan <kaike.wan@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Mike Marciniszyn 提交于
This patch pushes special case drop logic into an API to be shared by all interrupt handlers. Additionally, convert do_drop to a bool. Link: https://lore.kernel.org/r/20200106134203.119356.36962.stgit@awfm-01.aw.intel.comReviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NKaike Wan <kaike.wan@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Grzegorz Andrejczuk 提交于
Tracing interrupts, incrementing interrupt counter and ASPM are part that will be reused by HFI1 receive IRQ handlers. Create common function to have shared code in one place. Link: https://lore.kernel.org/r/20200106134157.119356.32656.stgit@awfm-01.aw.intel.comReviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NGrzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Signed-off-by: NKaike Wan <kaike.wan@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Mike Marciniszyn 提交于
This patch eliminate special cases by adding a fast_handler member to the receive context and changes to the fast handler as specified in the new variable. Initialize the variable as soon as the setting for dma tail is known when the context is created. Setting fast path is called every time when any context has entered slow path. Add function to check if contexts is using fast path and do not set fast path when it is already done to improve RCD fastpath setting. Link: https://lore.kernel.org/r/20200106134150.119356.87558.stgit@awfm-01.aw.intel.comReviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: NGrzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Signed-off-by: NSadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NKaike Wan <kaike.wan@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Mike Marciniszyn 提交于
Move routines and defines associated with hdrq size validation to a chip specific routine since the limits are specific to the device. Fix incorrect value for min size 2 -> 32 CSR writes should also be in chip.c. Create a chip routine to write the hdrq specific CSRs and call as appropriate. Link: https://lore.kernel.org/r/20200106134144.119356.74312.stgit@awfm-01.aw.intel.comReviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NKaike Wan <kaike.wan@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
This should not be using ib_dev to test for disassociation, during disassociation is_closed is set under lock and the waitq is triggered. Instead check is_closed and be sure to re-obtain the lock to test the value after the wait_event returns. Fixes: 036b1063 ("IB/uverbs: Enable device removal when there are active user space applications") Link: https://lore.kernel.org/r/1578504126-9400-12-git-send-email-yishaih@mellanox.comSigned-off-by: NYishai Hadas <yishaih@mellanox.com> Reviewed-by: NHåkon Bugge <haakon.bugge@oracle.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 09 1月, 2020 1 次提交
-
-
由 Arnd Bergmann 提交于
HPAGE_SHIFT is only defined on architectures that support hugepages: drivers/infiniband/core/umem_odp.c: In function 'ib_umem_odp_get': drivers/infiniband/core/umem_odp.c:245:26: error: 'HPAGE_SHIFT' undeclared (first use in this function); did you mean 'PAGE_SHIFT'? Enclose this in an #ifdef. Fixes: 9ff1b646 ("IB/core: Fix ODP with IB_ACCESS_HUGETLB handling") Link: https://lore.kernel.org/r/20200109084740.2872079-1-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NJason Gunthorpe <jgg@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 08 1月, 2020 5 次提交
-
-
由 Parav Pandit 提交于
This lock is used to protect the qp->open_list linked list. As a side effect it seems to also globally serialize the qp event_handler, but it isn't clear if that is a deliberate design. Link: https://lore.kernel.org/r/20191212113024.336702-5-leon@kernel.orgSigned-off-by: NParav Pandit <parav@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Parav Pandit 提交于
Given that ib_cache structure has only single member now, merge the cache lock directly in the ib_device. Link: https://lore.kernel.org/r/20191212113024.336702-4-leon@kernel.orgSigned-off-by: NParav Pandit <parav@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NJason Gunthorpe <jgg@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Parav Pandit 提交于
Currently when the low level driver notifies Pkey, GID, and port change events they are notified to the registered handlers in the order they are registered. IB core and other ULPs such as IPoIB are interested in GID, LID, Pkey change events. Since all GID queries done by ULPs are serviced by IB core, and the IB core deferes cache updates to a work queue, it is possible for other clients to see stale cache data when they handle their own events. For example, the below call tree shows how ipoib will call rdma_query_gid() concurrently with the update to the cache sitting in the WQ. mlx5_ib_handle_event() ib_dispatch_event() ib_cache_event() queue_work() -> slow cache update [..] ipoib_event() queue_work() [..] work handler ipoib_ib_dev_flush_light() __ipoib_ib_dev_flush() ipoib_dev_addr_changed_valid() rdma_query_gid() <- Returns old GID, cache not updated. Move all the event dispatch to a work queue so that the cache update is always done before any clients are notified. Fixes: f35faa4b ("IB/core: Simplify ib_query_gid to always refer to cache") Link: https://lore.kernel.org/r/20191212113024.336702-3-leon@kernel.orgSigned-off-by: NParav Pandit <parav@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NJason Gunthorpe <jgg@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Parav Pandit 提交于
When IB device profile initialization completes, device is marked as active. However, IB device is not marked inactive, during device removal flow. It should be the mirror of the add flow. Hence, mark it inactive during remove sequence. Link: https://lore.kernel.org/r/20191212113024.336702-2-leon@kernel.orgSigned-off-by: NParav Pandit <parav@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Lijun Ou 提交于
Fix some coding style issuses without changing logic of codes, most of the modification is unreasonable line breaks and alignments. Link: https://lore.kernel.org/r/1578313276-29080-8-git-send-email-liweihang@huawei.comSigned-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NLang Cheng <chenglang@huawei.com> Signed-off-by: NWeihang Li <liweihang@huawei.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-