[why]
when disable optc, need to clear the underflow status as well.
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In init_hw() we call init_pipes() before enabling power gating.
init_pipes() tries to power gate dsc but it may fail because
required force-ons are not released yet.
As a result with dsc config the following errors observed on resume:
"REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control"

[How]
Move enable_power_gating_plane() before init_pipes() in init_hw()
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NRoman Li <Roman.Li@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DSC Power down code has been moved from dcn31_init_hw into init_pipes()
Need to remove it from dcn10_init_hw() as well to avoid duplicated action
on dcn1.x/2.x

[How]
Remove DSC power down code from dcn10_init_hw()

Fixes: 8fa6f4c5 ("drm/amd/display: fixed the DSC power off sequence during Driver PnP")
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NRoman Li <Roman.Li@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
In headless systems, if SetMode/Power down timer
is not called, hardware will not be powered down
causing HW/SW discrepancies. Powering down hardware
on SetPowerState to D3 will ensure SW/HW state is accurate.

[HOW]
If PowerDownThread timer is not trigger but OS call
SetPowerState to D3, power down hardware.
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NPaul Hsieh <paul.hsieh@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Once DSC slice cannot fit pixel clock, we incorrectly
reset min slices to 0 and allow max slice to operate,
even when max slice itself cannot fit the pixel clock
properly.

[How]
Change the sequence such that we correctly determine
DSC is not possible when both min slices and max
slices cannot fit pixel clock per slice.
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NChris Park <Chris.Park@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY&HOW]
It can be enabled by users, but proper way is to report max_slave_planes
in DC caps for each ASIC.
Some structures use hardcoded max_plane=2, this is also addressed here.
Reviewed-by: NNevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We don't include this eDP FEC init on fastboot.

[How]
Set the fec to init value when stopping driver &get the fec register value to check should enable FEC.
Co-authored-by: NJingwen Zhu <Jingwen.Zhu@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NJingwen Zhu <Jingwen.Zhu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
W/a no longer needed
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NOliver Logush <oliver.logush@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
We want another entry in IRQ type that can be used to
help find the underflow interrupt source.

[HOW]
Added another mapping in IRQ type enum.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NAngus Wang <Angus.Wang@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

RAS error query support addition for JPEG 2.6

V2: removed unused options and corrected comment format.
Moved register definition to header file.

V3: poison query status check added.
Removed the error query support

V4: Return statement refactored.
Signed-off-by: NMohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

RAS error query support addition for VCN 2.6

V2: removed unused option and corrected comment format
Moved the register definition under header file

V3: poison query status check added.
Removed error query interface

V4: MMSCH poison check option removed, return true/false refactored.
Signed-off-by: NMohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Adding vcn and jpeg ver 2.6 ras register definition
Signed-off-by: NMohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Ras support addition for JPEG block

V2: removed default callback
Signed-off-by: NMohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

VCN block ras feature support addition

V2: default ras callback removed
Signed-off-by: NMohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add vcn and jpeg ras support options

V2: vcn and jpeg ras flag enabled for aldebaran asic only

V3: vcn and jpeg ras flag disabled for error counter query
Generic poison query interface added
VCN and JPEG ras enabled based on IP version check

V4: vcn and jpeg ras flag moved under ecc flag for dGPU
Signed-off-by: NMohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some video card has more than one vcn instance, passing 0 to
vcn_v3_0_pause_dpg_mode is incorrect.

Error msg:
Register(1) [mmUVD_POWER_STATUS] failed to reach value
0x00000001 != 0x00000002
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: Ntiancyin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

ATOMIC and DRIVER log categories do not typically contain per-frame log
messages. This patch re-classifies some messages in amd to chattier
categories to keep ATOMIC/DRIVER quiet.
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of ASIC type, use GC and MP1 IP versions for feature support checks.
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NKevin Wang <kevinyang.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For VCN FW to detect ASIC type, in order to use different mailbox registers.

V2: simplify codes and fix format issue.
Signed-off-by: NBoyuan Zhang <boyuan.zhang@amd.com>
Acked-by Huang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

   (v1)
     - implement emit_clk_levels for vega10, based on print_clk_levels,
       but using sysfs_emit rather than sprintf
     - modify local int vars to use uint32_t to match arg type of
       called functions
     - add return of error codes
     - refactor OD_XXX cases to return early with -EOPNOTSUPP if
       !(hwmgr->od_enabled)
Signed-off-by: NDarren Powell <darren.powell@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

 Extend commit 7f36948c92b2 ("amdgpu/pm: Implement new API function "emit" that accepts buffer base and write offset")
   Add new hwmgr API function "emit_clock_levels"
   - add member emit_clock_levels to pp_hwmgr_func
   - Implemented pp_dpm_emit_clock_levels
   - add pp_dpm_emit_clock_levels to pp_dpm_funcs
Signed-off-by: NDarren Powell <darren.powell@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Better to leave the decision when to flush the VM changes in the TLB to
the VM code.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: Philip Yang<Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of hand rolling the table_freed parameter.

v2: add some changes suggested by Philip
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: Philip Yang<Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of trying to figure out if a TLB flush is necessary or not use
the information provided by the VM subsystem now.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: Philip Yang<Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of tracking the VM updates through the dependencies just use a
sequence counter for page table updates which indicates the need to
flush the TLB.

This reduces the need to flush the TLB drastically.

v2: squash in NULL check fix (Christian)
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Store the 64bit sequence directly. Makes it simpler to use and saves a bit
of fence reference counting overhead.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Separate the VM page table backend operations from the state machine since
the amdgpu_vm.c file is becoming to complex.

The allocating, freeing and updating page tables and page directories can
easily be moved into a separate file.

While at it cleanup everything checkpatch.pl reported and rename the
functions a bit to make more clear that they belong together.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move the page tables to the idle list after updating the PDEs.

We have gone back and forth with that a couple of times because of problems
with the inter PD dependencies, but it should work now that we have the
state handling cleanly separated.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Moves FPU-related structs and dcn316_update_bw_bounding_box from dcn316
driver to dml/dcn31 that centralize FPU operations for DCN 3.1x
Signed-off-by: NMelissa Wen <mwen@igalia.com>
Reviewed-by: NAlex Hung <alex.hung@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Moves related structs and dcn315_update_bw_bounding_box from dcn315
driver code to dml/dcn31_fpu that centralizes FPU code for DCN 3.1x.
Signed-off-by: NMelissa Wen <mwen@igalia.com>
Reviewed-by: NAlex Hung <alex.hung@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Creates FPU files in dml/dcn31 folder to centralize FPU operations
from 3.1x drivers and moves all FPU-associated code from dcn31 driver
to there. It includes the struct _vcs_dpi_ip_params_st and
_vcs_dpi_soc_bounding_box_st and functions:

- dcn31_calculate_wm_and_dlg_fp()
- dcn31_update_bw_bounding_box()

adding dc_assert_fp_enabled to them and drop DC_FP_START/END inside
functions that was moved to dml folder, as required.
Signed-off-by: NMelissa Wen <mwen@igalia.com>
Reviewed-by: NAlex Hung <alex.hung@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along following fixes:
- HDCP SEND AKI INIT error
- fix audio format not updated after edid updated
- Reduce stack size
- FEC check in timing validation
- Add fSMC_MSG_SetDtbClk support
- Update VTEM Infopacket definition
- [FW Promotion] Release 0.0.109.0
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Print the status out when it passes, and also tell user gpu reset
is triggered when we fall back to legacy way.

v2: make the message more explicit.
v3: change succeeds to succeeded.
    replace pr_warn with dev_warn.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
HDCP sends AKI INIT error in case of multiple display on dock

[how]
Add new checks and method to handle display adjustment
for multiple display cases
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NAhmad Othman <ahmad.othman@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Harvest bit setting in IP data structure promises this,
so no need to set it explicitly.
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is a spelling mistake in a dev_error error message. Fix it.
Signed-off-by: NColin Ian King <colin.i.king@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Do RAS page retirement and use gpu reset as fallback in UTCL2 fault
handler.

v2: replace vm fault event with posion consumed event in UTCL2
poison consumption.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add help functions to query and reset RAS UTCL2 poison status.

v2: implement it on amdgpu side and kfd only calls it.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Client ID is more accruate here and we can deal with more different
cases with client ID.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>