Function iommu_dev_has_feature() has never been referenced in the tree,
and there does not appear to be anything coming soon to use it, so delete
it.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Acked-by: NWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1609940111-28563-7-git-send-email-john.garry@huawei.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Function iommu_domain_window_disable() is not referenced in the tree, so
delete it.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Acked-by: NWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1609940111-28563-6-git-send-email-john.garry@huawei.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Since commit c588072b ("iommu/vt-d: Convert intel iommu driver to the
iommu ops"), function copy_reserved_iova() is not referenced, so delete
it.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Acked-by: NWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1609940111-28563-3-git-send-email-john.garry@huawei.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Function has_iova_flush_queue() has no users outside iova.c, so make it
private.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Acked-by: NWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1609940111-28563-2-git-send-email-john.garry@huawei.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

There is a need to distinguish geniune per-cpu kthreads from kthreads
that happen to have a single CPU affinity.

Geniune per-cpu kthreads are kthreads that are CPU affine for
correctness, these will obviously have PF_KTHREAD set, but must also
have PF_NO_SETAFFINITY set, lest userspace modify their affinity and
ruins things.

However, these two things are not sufficient, PF_NO_SETAFFINITY is
also set on other tasks that have their affinities controlled through
other means, like for instance workqueues.

Therefore another bit is needed; it turns out kthread_create_per_cpu()
already has such a bit: KTHREAD_IS_PER_CPU, which is used to make
kthread_park()/kthread_unpark() work correctly.

Expose this flag and remove the implicit setting of it from
kthread_create_on_cpu(); the io_uring usage of it seems dubious at
best.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NValentin Schneider <valentin.schneider@arm.com>
Tested-by: NValentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.557620262@infradead.org

The device link device's name was of the form:
<supplier-dev-name>--<consumer-dev-name>

This can cause name collision as reported here [1] as device names are
not globally unique. Since device names have to be unique within the
bus/class, add the bus/class name as a prefix to the device names used to
construct the device link device name.

So the devuce link device's name will be of the form:
<supplier-bus-name>:<supplier-dev-name>--<consumer-bus-name>:<consumer-dev-name>

[1] - https://lore.kernel.org/lkml/20201229033440.32142-1-michael@walle.cc/

Fixes: 287905e6 ("driver core: Expose device link details in sysfs")
Cc: stable@vger.kernel.org
Reported-by: NMichael Walle <michael@walle.cc>
Tested-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NSaravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210110175408.1465657-1-saravanak@google.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

RTL8156 sends notifications about every 32ms.
Only display/log notifications when something changes.

This issue has been reported by others:
	https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472
	https://lkml.org/lkml/2020/8/27/1083

...
[785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN
[785962.929954] usb 1-1: Manufacturer: Realtek
[785962.929956] usb 1-1: SerialNumber: 000000001
[785962.991755] usbcore: registered new interface driver cdc_ether
[785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15
[785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384
[785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384
[785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15
[785963.019211] usbcore: registered new interface driver cdc_ncm
[785963.023856] usbcore: registered new interface driver cdc_wdm
[785963.025461] usbcore: registered new interface driver cdc_mbim
[785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0
[785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
...

This is about 2KB per second and will overwrite all contents of a 1MB
dmesg buffer in under 10 minutes rendering them useless for debugging
many kernel problems.

This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering
the majority of those logs useless too.

When the link is up (expected state), spew amount is >2x higher:
...
[786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
...

Chrome OS cannot support RTL8156 until this is fixed.
Signed-off-by: NGrant Grundler <grundler@chromium.org>
Reviewed-by: NHayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Export mdiobb_read() and mdiobb_write(), so Ethernet controller drivers
can call them from their MDIO read/write wrappers.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Tested-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Since NVMe v1.4 the Controller Memory Buffer must be explicitly enabled
by the host.
Signed-off-by: NKlaus Jensen <k.jensen@samsung.com>
[hch: avoid a local variable and add a comment]
Signed-off-by: NChristoph Hellwig <hch@lst.de>

GCC versions >= 4.9 and < 5.1 have been shown to emit memory references
beyond the stack pointer, resulting in memory corruption if an interrupt
is taken after the stack pointer has been adjusted but before the
reference has been executed. This leads to subtle, infrequent data
corruption such as the EXT4 problems reported by Russell King at the
link below.

Life is too short for buggy compilers, so raise the minimum GCC version
required by arm64 to 5.1.
Reported-by: NRussell King <linux@armlinux.org.uk>
Suggested-by: NArnd Bergmann <arnd@kernel.org>
Signed-off-by: NWill Deacon <will@kernel.org>
Tested-by: NNathan Chancellor <natechancellor@gmail.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210105154726.GD1551@shell.armlinux.org.uk
Link: https://lore.kernel.org/r/20210112224832.10980-1-will@kernel.orgSigned-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This reverts commit 367c820e.

lockup_detector_init() makes heavy use of per-cpu variables and must be
called with preemption disabled. Usually, it's handled early during boot
in kernel_init_freeable(), before SMP has been initialised.

Since we do not know whether or not our PMU interrupt can be signalled
as an NMI until considerably later in the boot process, the Arm PMU
driver attempts to re-initialise the lockup detector off the back of a
device_initcall(). Unfortunately, this is called from preemptible
context and results in the following splat:

  | BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
  | caller is debug_smp_processor_id+0x20/0x2c
  | CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.10.0+ #276
  | Hardware name: linux,dummy-virt (DT)
  | Call trace:
  |   dump_backtrace+0x0/0x3c0
  |   show_stack+0x20/0x6c
  |   dump_stack+0x2f0/0x42c
  |   check_preemption_disabled+0x1cc/0x1dc
  |   debug_smp_processor_id+0x20/0x2c
  |   hardlockup_detector_event_create+0x34/0x18c
  |   hardlockup_detector_perf_init+0x2c/0x134
  |   watchdog_nmi_probe+0x18/0x24
  |   lockup_detector_init+0x44/0xa8
  |   armv8_pmu_driver_init+0x54/0x78
  |   do_one_initcall+0x184/0x43c
  |   kernel_init_freeable+0x368/0x380
  |   kernel_init+0x1c/0x1cc
  |   ret_from_fork+0x10/0x30

Rather than bodge this with raw_smp_processor_id() or randomly disabling
preemption, simply revert the culprit for now until we figure out how to
do this properly.
Reported-by: NLecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: NWill Deacon <will@kernel.org>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20201221162249.3119-1-lecopzer.chen@mediatek.com
Link: https://lore.kernel.org/r/20210112221855.10666-1-will@kernel.orgSigned-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The size of kasan_early_shadow_pte[] now is PTRS_PER_PTE which defined
to 512 for arm.  This means that it only covers the prev Linux pte
entries, but not the HWTABLE pte entries for arm.

The reason it currently works is that the symbol kasan_early_shadow_page
immediately following kasan_early_shadow_pte in memory is page aligned,
which makes kasan_early_shadow_pte look like a 4KB size array.  But we
can't ensure the order is always right with different compiler/linker,
or if more bss symbols are introduced.

We had a test with QEMU + vexpress：put a 512KB-size symbol with
attribute __section(".bss..page_aligned") after kasan_early_shadow_pte,
and poisoned it after kasan_early_init().  Then enabled CONFIG_KASAN, it
failed to boot up.

Link: https://lkml.kernel.org/r/20210109044622.8312-1-hailongliiu@yeah.netSigned-off-by: NHailong Liu <liu.hailong6@zte.com.cn>
Signed-off-by: NZiliang Guo <guo.ziliang@zte.com.cn>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Boot a CONFIG_MEMCG=y kernel with "cgroup_disabled=memory" and you are
met by a series of warnings from the VM_WARN_ON_ONCE_PAGE(!memcg, page)
recently added to the inline mem_cgroup_page_lruvec().

An earlier attempt to place that warning, in mem_cgroup_lruvec(), had
been careful to do so after weeding out the mem_cgroup_disabled() case;
but was itself invalid because of the mem_cgroup_lruvec(NULL, pgdat) in
clear_pgdat_congested() and age_active_anon().

Warning in mem_cgroup_page_lruvec() was once useful in detecting a KSM
charge bug, so may be worth keeping: but skip if mem_cgroup_disabled().

Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2101032056260.1093@eggly.anvils
Fixes: 9a1ac228 ("mm/memcontrol:rewrite mem_cgroup_page_lruvec()")
Signed-off-by: NHugh Dickins <hughd@google.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Acked-by: NChris Down <chris@chrisdown.name>
Reviewed-by: NBaoquan He <bhe@redhat.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Hui Su <sh_def@163.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The get_seconds() cleanup seems to have been completed, now it is
time to delete the legacy interface to avoid misuse later.
Signed-off-by: NChunguang Xu <brookxu@tencent.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1606816351-26900-1-git-send-email-brookxu@tencent.com

skb_seq_read iterates over an skb, returning pointer and length of
the next data range with each call.

It relies on kmap_atomic to access highmem pages when needed.

An skb frag may be backed by a compound page, but kmap_atomic maps
only a single page. There are not enough kmap slots to always map all
pages concurrently.

Instead, if kmap_atomic is needed, iterate over each page.

As this increases the number of calls, avoid this unless needed.
The necessary condition is captured in skb_frag_must_loop.

I tried to make the change as obvious as possible. It should be easy
to verify that nothing changes if skb_frag_must_loop returns false.

Tested:
  On an x86 platform with
    CONFIG_HIGHMEM=y
    CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y
    CONFIG_NETFILTER_XT_MATCH_STRING=y

  Run
    ip link set dev lo mtu 1500
    iptables -A OUTPUT -m string --string 'badstring' -algo bm -j ACCEPT
    dd if=/dev/urandom of=in bs=1M count=20
    nc -l -p 8000 > /dev/null &
    nc -w 1 -q 0 localhost 8000 < in
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Skb frags may be backed by highmem and/or compound pages. Highmem
pages need kmap_atomic mappings to access. But kmap_atomic maps a
single page, not the entire compound page.

skb_foreach_page iterates over an skb frag, in one step in the common
case, page by page only if kmap_atomic must be called for each page.
The decision logic is captured in skb_frag_must_loop.

CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP extends kmap from highmem to all
pages, to increase code coverage.

Extend skb_frag_must_loop to this new condition.

Link: https://lore.kernel.org/linux-mm/20210106180132.41dc249d@gandalf.local.home/
Fixes: 0e91a0c6 ("mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP")
Reported-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Tested-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

With external metadata device, flush requests are not passed down to the
data device.

Fix this by submitting the flush request in dm_integrity_flush_buffers. In
order to not degrade performance, we overlap the data device flush with
the metadata device flush.
Reported-by: NLukas Straub <lukasstraub2@web.de>
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

This reverts commit 757055ae.

The commit caused that ttynull was used as the default console
on several systems[1][2][3]. As a result, the console was
blank even when a better alternative existed.

It happened when there was no console configured
on the command line and ttynull_init() was the first initcall
calling register_console().

Or it happened when /dev/ did not exist when console_on_rootfs()
was called. It was not able to open /dev/console even though
a console driver was registered. It tried to add ttynull console
but it obviously did not help. But ttynull became the preferred
console and was used by /dev/console when it was available later.

The commit tried to fix a historical problem that have been there
for ages. The primary motivation was the commit 3cffa06a
("printk/console: Allow to disable console output by using console=""
 or console=null"). It provided a clean solution for a workaround
 that was widely used and worked only by chance.

This revert causes that the console="" or console=null command line
options will again work only by chance. These options will cause that
a particular console will be preferred and the default (tty) ones
will not get enabled. There will be no console registered at
all. As a result there won't be stdin, stdout, and stderr for
the init process. But it worked exactly this way even before.

The proper solution has to fulfill many conditions:

  + Register ttynull only when explicitly required or as
    the ultimate fallback.

  + ttynull should get associated with /dev/console but it must
    not become preferred console when used as a fallback.
    Especially, it must still be possible to replace it
    by a better console later.

Such a change requires clean up of the register_console() code.
Otherwise, it would be even harder to follow. Especially, the use
of has_preferred_console and CON_CONSDEV flag is tricky. The clean
up is risky. The ordering of consoles is not well defined. And
any changes tend to break existing user settings.

Do the revert at the least risky solution for now.

[1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/
[2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/
[3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/Reported-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: NVineet Gupta <vgupta@synopsys.com>
Reported-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NPetr Mladek <pmladek@suse.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Expose firmware indication that it supports setting eswitch uplink state
to follow (follow the physical link). Condition setting the eswitch
uplink admin-state with this capability bit. Older FW may not support
the uplink state setting.

Fixes: 7d0314b1 ("net/mlx5e: Modify uplink state on interface up/down")
Signed-off-by: NAya Levin <ayal@nvidia.com>
Reviewed-by: NMoshe Shemesh <moshe@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

It adds a stub acpi_create_platform_device() for !CONFIG_ACPI build, so
that caller doesn't have to deal with !CONFIG_ACPI build issue.
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The aux-domain attach/detach are not tracked, some data structures might
be used after free. This causes general protection faults when multiple
subdevices are created and assigned to a same guest machine:

  | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI
  | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0
  | [...]
  | Call Trace:
  |  iommu_aux_detach_device+0x24/0x70
  |  vfio_mdev_detach_domain+0x3b/0x60
  |  ? vfio_mdev_set_domain+0x50/0x50
  |  iommu_group_for_each_dev+0x4f/0x80
  |  vfio_iommu_detach_group.isra.0+0x22/0x30
  |  vfio_iommu_type1_detach_group.cold+0x71/0x211
  |  ? find_exported_symbol_in_section+0x4a/0xd0
  |  ? each_symbol_section+0x28/0x50
  |  __vfio_group_unset_container+0x4d/0x150
  |  vfio_group_try_dissolve_container+0x25/0x30
  |  vfio_group_put_external_user+0x13/0x20
  |  kvm_vfio_group_put_external_user+0x27/0x40 [kvm]
  |  kvm_vfio_destroy+0x45/0xb0 [kvm]
  |  kvm_put_kvm+0x1bb/0x2e0 [kvm]
  |  kvm_vm_release+0x22/0x30 [kvm]
  |  __fput+0xcc/0x260
  |  ____fput+0xe/0x10
  |  task_work_run+0x8f/0xb0
  |  do_exit+0x358/0xaf0
  |  ? wake_up_state+0x10/0x20
  |  ? signal_wake_up_state+0x1a/0x30
  |  do_group_exit+0x47/0xb0
  |  __x64_sys_exit_group+0x18/0x20
  |  do_syscall_64+0x57/0x1d0
  |  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix the crash by tracking the subdevices when attaching and detaching
aux-domains.

Fixes: 67b8e02b ("iommu/vt-d: Aux-domain specific domain attach/detach")
Co-developed-by: NXin Zeng <xin.zeng@intel.com>
Signed-off-by: NXin Zeng <xin.zeng@intel.com>
Signed-off-by: NLiu Yi L <yi.l.liu@intel.com>
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.comSigned-off-by: NWill Deacon <will@kernel.org>

'struct intel_svm' is shared by all devices bound to a give process,
but records only a single pointer to a 'struct intel_iommu'. Consequently,
cache invalidations may only be applied to a single DMAR unit, and are
erroneously skipped for the other devices.

In preparation for fixing this, rework the structures so that the iommu
pointer resides in 'struct intel_svm_dev', allowing 'struct intel_svm'
to track them in its device list.

Fixes: 1c4f88b7 ("iommu/vt-d: Shared virtual address in scalable mode")
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Raj Ashok <ashok.raj@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Reported-by: NGuo Kaijie <Kaijie.Guo@intel.com>
Reported-by: NXin Zeng <xin.zeng@intel.com>
Signed-off-by: NGuo Kaijie <Kaijie.Guo@intel.com>
Signed-off-by: NXin Zeng <xin.zeng@intel.com>
Signed-off-by: NLiu Yi L <yi.l.liu@intel.com>
Tested-by: NGuo Kaijie <Kaijie.Guo@intel.com>
Cc: stable@vger.kernel.org # v5.0+
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1609949037-25291-2-git-send-email-yi.l.liu@intel.comSigned-off-by: NWill Deacon <will@kernel.org>

Done opencode in_serving_softirq() checks in in_serving_softirq() to avoid
cluttering the code, hide them in kcov helpers instead.

Fixes: aee9ddb1 ("kcov, usb: only collect coverage from __usb_hcd_giveback_urb in softirq")
Signed-off-by: NAndrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/aeb430c5bb90b0ccdf1ec302c70831c1a47b9c45.1609876340.git.andreyknvl@google.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Silly GCC doesn't always inline these trivial functions.

Fixes the following warning:

  arch/x86/kernel/sys_ia32.o: warning: objtool: cp_stat64()+0xd8: call to new_encode_dev() with UACCESS enabled

Link: https://lkml.kernel.org/r/984353b44a4484d86ba9f73884b7306232e25e30.1608737428.git.jpoimboe@redhat.comSigned-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>	[build-tested]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add these macros, since we can use them in drivers.

Link: https://lkml.kernel.org/r/20201229072819.11183-1-sjhuang@iluvatar.aiSigned-off-by: NHuang Shijie <sjhuang@iluvatar.ai>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

VMware observed a performance regression during memmap init on their
platform, and bisected to commit 73a6e474 ("mm: memmap_init:
iterate over memblock regions rather that check each PFN") causing it.

Before the commit:

  [0.033176] Normal zone: 1445888 pages used for memmap
  [0.033176] Normal zone: 89391104 pages, LIFO batch:63
  [0.035851] ACPI: PM-Timer IO Port: 0x448

With commit

  [0.026874] Normal zone: 1445888 pages used for memmap
  [0.026875] Normal zone: 89391104 pages, LIFO batch:63
  [2.028450] ACPI: PM-Timer IO Port: 0x448

The root cause is the current memmap defer init doesn't work as expected.

Before, memmap_init_zone() was used to do memmap init of one whole zone,
to initialize all low zones of one numa node, but defer memmap init of
the last zone in that numa node.  However, since commit 73a6e474,
function memmap_init() is adapted to iterater over memblock regions
inside one zone, then call memmap_init_zone() to do memmap init for each
region.

E.g, on VMware's system, the memory layout is as below, there are two
memory regions in node 2.  The current code will mistakenly initialize the
whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to
iniatialize only one memmory section on the 2nd region [mem
0x10000000000-0x1033fffffff].  In fact, we only expect to see that there's
only one memory section's memmap initialized.  That's why more time is
costed at the time.

[    0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff]
[    0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff]
[    0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff]
[    0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff]

Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass
down the real zone end pfn so that defer_init() can use it to judge
whether defer need be taken in zone wide.

Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com
Fixes: commit 73a6e474 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: NBaoquan He <bhe@redhat.com>
Reported-by: NRahul Gopakumar <gopakumarr@vmware.com>
Reviewed-by: NMike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Otherwise it causes a gcc warning:

  mm/filemap.c:830:14: warning: no previous prototype for `__add_to_page_cache_locked' [-Wmissing-prototypes]

A previous attempt to make this function static led to compilation
errors when CONFIG_DEBUG_INFO_BTF is enabled because
__add_to_page_cache_locked() is referred to by BPF code.

Adding a prototype will silence the warning.

Link: https://lkml.kernel.org/r/1608693702-4665-1-git-send-email-jrdr.linux@gmail.comSigned-off-by: NSouptick Joarder <jrdr.linux@gmail.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 14dc3983.

Macro Elver had sent a fix proper fix earlier, and also pointed out
corner cases:
 "I guess what you propose is simpler, but might still have corner cases
  where we still get warnings. In particular, if some file (for whatever
  reason) does not include build_bug.h and uses a raw _Static_assert(),
  then we still get warnings. E.g. I see 1 user of raw _Static_assert()
  (drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h )."

I believe the raw use of _Static_assert() should be allowed, so this
should be fixed in genksyms.

Even after commit 14dc3983 ("kbuild: avoid static_assert for
genksyms"), I confirmed the following test code emits the warning.

  ---------------->8----------------
  #include <linux/export.h>

  _Static_assert((1 ?: 0), "");

  void foo(void) { }
  EXPORT_SYMBOL(foo);
  ---------------->8----------------

  WARNING: modpost: EXPORT symbol "foo" [vmlinux] version generation failed, symbol will not be versioned.

Now that commit 869b91992bce ("genksyms: Ignore module scoped
_Static_assert()") fixed this issue properly, the workaround should
be reverted.

Link: https://lkml.org/lkml/2020/12/10/845
Link: https://lkml.kernel.org/r/20201219183911.181442-1-masahiroy@kernel.orgSigned-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Cc: Marco Elver <elver@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Avoid -Wunused-const-variable warnings for "make W=1".
Reported-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Commit

  121b32a5 ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments")

converted native x86-32 which take 64-bit arguments to use the
compat handlers to allow conversion to passing args via pt_regs.
sys_fanotify_mark() was however missed, as it has a general compat
handler. Add a config option that will use the syscall wrapper that
takes the split args for native 32-bit.

 [ bp: Fix typo in Kconfig help text. ]

Fixes: 121b32a5 ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments")
Reported-by: NPaweł Jasiak <pawel@jasiak.xyz>
Signed-off-by: NBrian Gerst <brgerst@gmail.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NJan Kara <jack@suse.cz>
Acked-by: NAndy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20201130223059.101286-1-brgerst@gmail.com

The reason cache merging is disabled with KASAN is because KASAN puts its
metadata right after the allocated object. When the merged caches have
slightly different sizes, the metadata ends up in different places, which
KASAN doesn't support.

It might be possible to adjust the metadata allocation algorithm and make
it friendly to the cache merging code. Instead this change takes a simpler
approach and allows merging caches when no metadata is present. Which is
the case for hardware tag-based KASAN with kasan.mode=prod.

Link: https://lkml.kernel.org/r/37497e940bfd4b32c0a93a702a9ae4cf061d5392.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Ia114847dfb2244f297d2cb82d592bf6a07455dbaCo-developed-by: NVincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: NVincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Reviewed-by: NMarco Elver <elver@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename kasan_poison_kfree() to kasan_slab_free_mempool() as it better
reflects what this annotation does. Also add a comment that explains the
PageSlab() check.

No functional changes.

Link: https://lkml.kernel.org/r/141675fb493555e984c5dca555e9d9f768c7bbaa.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I5026f87364e556b506ef1baee725144bb04b8810Signed-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NMarco Elver <elver@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Declare the kasan_enabled static key in include/linux/kasan.h and in
include/linux/mm.h and check it in all kasan annotations. This allows to
avoid any slowdown caused by function calls when kasan_enabled is
disabled.

Link: https://lkml.kernel.org/r/9f90e3c0aa840dbb4833367c2335193299f69023.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I2589451d3c96c97abbcbf714baabe6161c6f153eCo-developed-by: NVincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: NVincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NMarco Elver <elver@google.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's the external annotation kasan_unpoison_slab() that is currently
defined as static inline and uses kasan_unpoison_range(). Open-code this
function in mempool.c. Otherwise with an upcoming change this function
will result in an unnecessary function call.

Link: https://lkml.kernel.org/r/131a6694a978a9a8b150187e539eecc8bcbf759b.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Ia7c8b659f79209935cbaab3913bf7f082cc43a0eSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NMarco Elver <elver@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Using kasan_reset_tag() currently results in a function call. As it's
called quite often from the allocator code, this leads to a noticeable
slowdown. Move it to include/linux/kasan.h and turn it into a static
inline function. Also remove the now unneeded reset_tag() internal KASAN
macro and use kasan_reset_tag() instead.

Link: https://lkml.kernel.org/r/6940383a3a9dfb416134d338d8fac97a9ebb8686.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I4d2061acfe91d480a75df00b07c22d8494ef14b5Signed-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NMarco Elver <elver@google.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's a config option CONFIG_KASAN_STACK that has to be enabled for
KASAN to use stack instrumentation and perform validity checks for
stack variables.

There's no need to unpoison stack when CONFIG_KASAN_STACK is not enabled.
Only call kasan_unpoison_task_stack[_below]() when CONFIG_KASAN_STACK is
enabled.

Note, that CONFIG_KASAN_STACK is an option that is currently always
defined when CONFIG_KASAN is enabled, and therefore has to be tested
with #if instead of #ifdef.

Link: https://lkml.kernel.org/r/d09dd3f8abb388da397fd11598c5edeaa83fe559.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/If8a891e9fe01ea543e00b576852685afec0887e3Signed-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NMarco Elver <elver@google.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide implementation of KASAN functions required for the hardware
tag-based mode.  Those include core functions for memory and pointer
tagging (tags_hw.c) and bug reporting (report_tags_hw.c).  Also adapt
common KASAN code to support the new mode.

Link: https://lkml.kernel.org/r/cfd0fbede579a6b66755c98c88c108e54f9c56bf.1606161801.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NAlexander Potapenko <glider@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some #ifdef CONFIG_KASAN checks are only relevant for software KASAN modes
(either related to shadow memory or compiler instrumentation).  Expand
those into CONFIG_KASAN_GENERIC || CONFIG_KASAN_SW_TAGS.

Link: https://lkml.kernel.org/r/e6971e432dbd72bb897ff14134ebb7e169bdcf0c.1606161801.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NAlexander Potapenko <glider@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename kasan_init_tags() to kasan_init_sw_tags() as the upcoming hardware
tag-based KASAN mode will have its own initialization routine.  Also
similarly to kasan_init() mark kasan_init_tags() as __init.

Link: https://lkml.kernel.org/r/71e52af72a09f4b50c8042f16101c60e50649fbb.1606161801.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NAlexander Potapenko <glider@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.

Hardware tag-based KASAN won't use kasan_depth.  Only define and use it
when one of the software KASAN modes are enabled.

No functional changes for software modes.

Link: https://lkml.kernel.org/r/e16f15aeda90bc7fb4dfc2e243a14b74cc5c8219.1606161801.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NAlexander Potapenko <glider@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>