Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 11 11月, 2021 1 次提交
    • V
      preempt: Restore preemption model selection configs · a8b76910
      由 Valentin Schneider 提交于 
      Commit c597bfdd ("sched: Provide Kconfig support for default dynamic
preempt mode") changed the selectable config names for the preemption
model. This means a config file must now select

  CONFIG_PREEMPT_BEHAVIOUR=y

rather than

  CONFIG_PREEMPT=y

to get a preemptible kernel. This means all arch config files would need to
be updated - right now they'll all end up with the default
CONFIG_PREEMPT_NONE_BEHAVIOUR.

Rather than touch a good hundred of config files, restore usage of
CONFIG_PREEMPT{_NONE, _VOLUNTARY}. Make them configure:
o The build-time preemption model when !PREEMPT_DYNAMIC
o The default boot-time preemption model when PREEMPT_DYNAMIC

Add siblings of those configs with the _BUILD suffix to unconditionally
designate the build-time preemption model (PREEMPT_DYNAMIC is built with
the "highest" preemption model it supports, aka PREEMPT). Downstream
configs should by now all be depending / selected by CONFIG_PREEMPTION
rather than CONFIG_PREEMPT, so only a few sites need patching up.
Signed-off-by: NValentin Schneider <valentin.schneider@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NMarco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20211110202448.4054153-2-valentin.schneider@arm.com
      a8b76910
  3. 10 11月, 2021 4 次提交
  5. 07 11月, 2021 1 次提交
  7. 01 10月, 2021 3 次提交
  9. 19 8月, 2021 1 次提交
  11. 02 7月, 2021 2 次提交
  13. 30 6月, 2021 1 次提交
    • S
      slub: force on no_hash_pointers when slub_debug is enabled · 79270291
      由 Stephen Boyd 提交于 
      Obscuring the pointers that slub shows when debugging makes for some
confusing slub debug messages:

 Padding overwritten. 0x0000000079f0674a-0x000000000d4dce17

Those addresses are hashed for kernel security reasons.  If we're trying
to be secure with slub_debug on the commandline we have some big problems
given that we dump whole chunks of kernel memory to the kernel logs.
Let's force on the no_hash_pointers commandline flag when slub_debug is on
the commandline.  This makes slub debug messages more meaningful and if by
chance a kernel address is in some slub debug object dump we will have a
better chance of figuring out what went wrong.

Note that we don't use %px in the slub code because we want to reduce the
number of places that %px is used in the kernel.  This also nicely prints
a big fat warning at kernel boot if slub_debug is on the commandline so
that we know that this kernel shouldn't be used on production systems.

[akpm@linux-foundation.org: fix build with CONFIG_SLUB_DEBUG=n]

Link: https://lkml.kernel.org/r/20210601182202.3011020-5-swboyd@chromium.orgSigned-off-by: NStephen Boyd <swboyd@chromium.org>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NPetr Mladek <pmladek@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      79270291
  15. 11 6月, 2021 1 次提交
    • J
      ice: add low level PTP clock access functions · 03cb4473
      由 Jacob Keller 提交于 
      Add the ice_ptp_hw.c file and some associated definitions to the ice
driver folder. This file contains basic low level definitions for
functions that interact with the device hardware.

For now, only E810-based devices are supported. The ice hardware
supports 2 major variants which have different PHYs with different
procedures necessary for interacting with the device clock.

Because the device captures timestamps in the PHY, each PHY has its own
internal timer. The timers are synchronized in hardware by first
preparing the source timer and the PHY timer shadow registers, and then
issuing a synchronization command. This ensures that both the source
timer and PHY timers are programmed simultaneously. The timers
themselves are all driven from the same oscillator source.

The functions in ice_ptp_hw.c abstract over the differences between how
the PHYs in E810 are programmed vs how the PHYs in E822 devices are
programmed. This series only implements E810 support, but E822 support
will be added in a future change.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
      03cb4473
  17. 08 5月, 2021 1 次提交
    • M
      linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h> · 0ab1438b
      由 Masahiro Yamada 提交于 
      <linux/kconfig.h> is included from all the kernel-space source files,
including C, assembly, linker scripts. It is intended to contain a
minimal set of macros to evaluate CONFIG options.

IF_ENABLED() is an intruder here because (x ? y : z) is C code, which
should not be included from assembly files or linker scripts.

Also, <linux/kconfig.h> is no longer self-contained because NULL is
defined in <linux/stddef.h>.

Move IF_ENABLED() out to <linux/kernel.h> as PTR_IF(). PTF_IF()
takes the general boolean expression instead of a CONFIG option
so that it fits better in <linux/kernel.h>.
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Reviewed-by: NKees Cook <keescook@chromium.org>
      0ab1438b
  19. 07 5月, 2021 1 次提交
  21. 17 2月, 2021 2 次提交
  23. 16 12月, 2020 1 次提交
  25. 24 11月, 2020 1 次提交
  27. 20 11月, 2020 1 次提交
  29. 26 10月, 2020 1 次提交
  31. 17 10月, 2020 1 次提交
  33. 15 9月, 2020 1 次提交
  35. 29 8月, 2020 1 次提交
  37. 13 8月, 2020 5 次提交
  39. 27 7月, 2020 1 次提交
  41. 09 6月, 2020 2 次提交
    • G
      panic: add sysctl to dump all CPUs backtraces on oops event · 60c958d8
      由 Guilherme G. Piccoli 提交于 
      Usually when the kernel reaches an oops condition, it's a point of no
return; in case not enough debug information is available in the kernel
splat, one of the last resorts would be to collect a kernel crash dump
and analyze it.  The problem with this approach is that in order to
collect the dump, a panic is required (to kexec-load the crash kernel).
When in an environment of multiple virtual machines, users may prefer to
try living with the oops, at least until being able to properly shutdown
their VMs / finish their important tasks.

This patch implements a way to collect a bit more debug details when an
oops event is reached, by printing all the CPUs backtraces through the
usage of NMIs (on architectures that support that).  The sysctl added
(and documented) here was called "oops_all_cpu_backtrace", and when set
will (as the name suggests) dump all CPUs backtraces.

Far from ideal, this may be the last option though for users that for
some reason cannot panic on oops.  Most of times oopses are clear enough
to indicate the kernel portion that must be investigated, but in virtual
environments it's possible to observe hypervisor/KVM issues that could
lead to oopses shown in other guests CPUs (like virtual APIC crashes).
This patch hence aims to help debug such complex issues without
resorting to kdump.
Signed-off-by: NGuilherme G. Piccoli <gpiccoli@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NKees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200327224116.21030-1-gpiccoli@canonical.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      60c958d8
    • R
      kernel: add panic_on_taint · db38d5c1
      由 Rafael Aquini 提交于 
      Analogously to the introduction of panic_on_warn, this patch introduces
a kernel option named panic_on_taint in order to provide a simple and
generic way to stop execution and catch a coredump when the kernel gets
tainted by any given flag.

This is useful for debugging sessions as it avoids having to rebuild the
kernel to explicitly add calls to panic() into the code sites that
introduce the taint flags of interest.

For instance, if one is interested in proceeding with a post-mortem
analysis at the point a given code path is hitting a bad page (i.e.
unaccount_page_cache_page(), or slab_bug()), a coredump can be collected
by rebooting the kernel with 'panic_on_taint=0x20' amended to the
command line.

Another, perhaps less frequent, use for this option would be as a means
for assuring a security policy case where only a subset of taints, or no
single taint (in paranoid mode), is allowed for the running system.  The
optional switch 'nousertaint' is handy in this particular scenario, as
it will avoid userspace induced crashes by writes to sysctl interface
/proc/sys/kernel/tainted causing false positive hits for such policies.

[akpm@linux-foundation.org: tweak kernel-parameters.txt wording]
Suggested-by: NQian Cai <cai@lca.pw>
Signed-off-by: NRafael Aquini <aquini@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NLuis Chamberlain <mcgrof@kernel.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: http://lkml.kernel.org/r/20200515175502.146720-1-aquini@redhat.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      db38d5c1
  43. 21 2月, 2020 1 次提交
    • T
      sched: Provide cant_migrate() · 4e139c77
      由 Thomas Gleixner 提交于 
      Some code pathes rely on preempt_disable() to prevent migration on a non RT
enabled kernel. These preempt_disable/enable() pairs are substituted by
migrate_disable/enable() pairs or other forms of RT specific protection. On
RT these protections prevent migration but not preemption. Obviously a
cant_sleep() check in such a section will trigger on RT because preemption
is not disabled.

Provide a cant_migrate() macro which maps to cant_sleep() on a non RT
kernel and an empty placeholder for RT for now. The placeholder will be
changed to a proper debug check along with the RT specific migration
protection mechanism.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200214161503.070487511@linutronix.de
      4e139c77
  45. 31 12月, 2019 1 次提交
  47. 05 12月, 2019 1 次提交
  49. 25 11月, 2019 1 次提交
  51. 07 9月, 2019 1 次提交
    • D
      kernel.h: Add non_block_start/end() · 312364f3
      由 Daniel Vetter 提交于 
      In some special cases we must not block, but there's not a spinlock,
preempt-off, irqs-off or similar critical section already that arms the
might_sleep() debug checks. Add a non_block_start/end() pair to annotate
these.

This will be used in the oom paths of mmu-notifiers, where blocking is not
allowed to make sure there's forward progress. Quoting Michal:

"The notifier is called from quite a restricted context - oom_reaper -
which shouldn't depend on any locks or sleepable conditionals. The code
should be swift as well but we mostly do care about it to make a forward
progress. Checking for sleepable context is the best thing we could come
up with that would describe these demands at least partially."

Peter also asked whether we want to catch spinlocks on top, but Michal
said those are less of a problem because spinlocks can't have an indirect
dependency upon the page allocator and hence close the loop with the oom
reaper.

Suggested by Michal Hocko.

Link: https://lore.kernel.org/r/20190826201425.17547-4-daniel.vetter@ffwll.ch
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
      312364f3
  53. 17 7月, 2019 1 次提交
  55. 29 6月, 2019 1 次提交