Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 08 6月, 2018 1 次提交
  3. 06 6月, 2018 1 次提交
  5. 30 5月, 2018 1 次提交
    • K
      perf parse-events: Handle uncore event aliases in small groups properly · 369b2308
      由 Kan Liang 提交于 
      Perf stat doesn't count the uncore event aliases from the same uncore
block in a group, for example:

  perf stat -e '{unc_m_cas_count.all,unc_m_clockticks}' -a -I 1000
  #           time             counts unit events
       1.000447342      <not counted>      unc_m_cas_count.all
       1.000447342      <not counted>      unc_m_clockticks
       2.000740654      <not counted>      unc_m_cas_count.all
       2.000740654      <not counted>      unc_m_clockticks

The output is very misleading. It gives a wrong impression that the
uncore event doesn't work.

An uncore block could be composed by several PMUs. An uncore event alias
is a joint name which means the same event runs on all PMUs of a block.
Perf doesn't support mixed events from different PMUs in the same group.
It is wrong to put uncore event aliases in a big group.

The right way is to split the big group into multiple small groups which
only include the events from the same PMU.

Only uncore event aliases from the same uncore block should be specially
handled here. It doesn't make sense to mix the uncore events with other
uncore events from different blocks or even core events in a group.

With the patch:
  #           time             counts unit events
     1.001557653            140,833      unc_m_cas_count.all
     1.001557653      1,330,231,332      unc_m_clockticks
     2.002709483             85,007      unc_m_cas_count.all
     2.002709483      1,429,494,563      unc_m_clockticks
Reported-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1525727623-19768-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      369b2308
  7. 16 5月, 2018 1 次提交
    • K
      perf parse-events: Handle uncore event aliases in small groups properly · 3cdc5c2c
      由 Kan Liang 提交于 
      Perf stat doesn't count the uncore event aliases from the same uncore
block in a group, for example:

  perf stat -e '{unc_m_cas_count.all,unc_m_clockticks}' -a -I 1000
  #           time             counts unit events
       1.000447342      <not counted>      unc_m_cas_count.all
       1.000447342      <not counted>      unc_m_clockticks
       2.000740654      <not counted>      unc_m_cas_count.all
       2.000740654      <not counted>      unc_m_clockticks

The output is very misleading. It gives a wrong impression that the
uncore event doesn't work.

An uncore block could be composed by several PMUs. An uncore event alias
is a joint name which means the same event runs on all PMUs of a block.
Perf doesn't support mixed events from different PMUs in the same group.
It is wrong to put uncore event aliases in a big group.

The right way is to split the big group into multiple small groups which
only include the events from the same PMU.

Only uncore event aliases from the same uncore block should be specially
handled here. It doesn't make sense to mix the uncore events with other
uncore events from different blocks or even core events in a group.

With the patch:
  #           time             counts unit events
     1.001557653            140,833      unc_m_cas_count.all
     1.001557653      1,330,231,332      unc_m_clockticks
     2.002709483             85,007      unc_m_cas_count.all
     2.002709483      1,429,494,563      unc_m_clockticks
Reported-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1525727623-19768-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      3cdc5c2c
  9. 08 5月, 2018 1 次提交
  11. 23 4月, 2018 1 次提交
  13. 08 3月, 2018 2 次提交
    • A
      perf pmu: Auto-merge PMU events created by prefix or glob match · c199c11d
      由 Agustin Vega-Frias 提交于 
      Auto-merge for these events was disabled when auto-merging of non-alias
events was disabled in commit 63ce8449 (perf stat: Only auto-merge events
that are PMU aliases).

Non-merging of legacy events is preserved:

    $ perf stat -ag -e cache-misses,cache-misses sleep 1

     Performance counter stats for 'system wide':

                86,323      cache-misses
                86,323      cache-misses

           1.002623307 seconds time elapsed

But prefix or glob matching auto-merges the events created:

    $ perf stat -a -e l3cache/read-miss/ sleep 1

     Performance counter stats for 'system wide':

                   328      l3cache/read-miss/

           1.002627008 seconds time elapsed

    $ perf stat -a -e l3cache_0_[01]/read-miss/ sleep 1

     Performance counter stats for 'system wide':

                   172      l3cache/read-miss/

           1.002627008 seconds time elapsed

As with events created with aliases, auto-merging can be suppressed with
the --no-merge option:

    $ perf stat -a -e l3cache/read-miss/ --no-merge sleep 1

     Performance counter stats for 'system wide':

                    67      l3cache/read-miss/
                    67      l3cache/read-miss/
                    63      l3cache/read-miss/
                    60      l3cache/read-miss/

           1.002622192 seconds time elapsed
Signed-off-by: NAgustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Change-Id: I0a47eed54c05e1982ca964d743b37f50f60c508c
Link: http://lkml.kernel.org/r/1520345084-42646-4-git-send-email-agustinv@codeaurora.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c199c11d
    • A
      perf pmu: Support wildcards on pmu name in dynamic pmu events · b2b9d3a3
      由 Agustin Vega-Frias 提交于 
      Starting on v4.12 event parsing code for dynamic pmu events already
supports prefix-based matching of multiple pmus when creating dynamic
events. E.g., in a system with the following dynamic pmus:

    mypmu_0
    mypmu_1
    mypmu_2
    mypmu_4

passing mypmu/<config>/ as an event spec will result in the creation of
the event in all of the pmus. This change expands this matching through
the use of fnmatch so glob-like expressions can be used to create events
in multiple pmus. E.g., in the system described above if a user only
wants to create the event in mypmu_0 and mypmu_1, mypmu_[01]/<config>/
can be passed.
Signed-off-by: NAgustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Change-Id: Icb25653fc5d5239c20f3bffdfdf4ab4c9c9bb20b
Link: http://lkml.kernel.org/r/1520454947-16977-1-git-send-email-agustinv@codeaurora.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      b2b9d3a3
  15. 18 8月, 2017 4 次提交
  17. 22 3月, 2017 3 次提交
  19. 18 2月, 2017 1 次提交
  21. 15 2月, 2017 1 次提交
  23. 08 2月, 2017 2 次提交
  25. 14 9月, 2016 1 次提交
  27. 08 3月, 2016 1 次提交
  29. 25 2月, 2016 1 次提交
    • A
      perf tools: Fix parsing of pmu events with empty list of modifiers · bb109acc
      由 Arnaldo Carvalho de Melo 提交于 
      In 1d55e8ef ("perf tools: Introduce opt_event_config nonterminal") I
removed the unconditional "'/' '/'" for pmu events such as
"intel_pt//" but forgot to use opt_event_config where it expected some
event_config, oops. Fix it.

Noticed when trying to use:

  # perf record -e intel_pt// -a sleep 1
  event syntax error: 'intel_pt//'
                               \___ parser error
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 1d55e8ef ("perf tools: Introduce opt_event_config nonterminal")
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      bb109acc
  31. 22 2月, 2016 2 次提交
    • W
      perf tools: Enable indices setting syntax for BPF map · e571e029
      由 Wang Nan 提交于 
      This patch introduces a new syntax to perf event parser:

 # perf record -e './test_bpf_map_3.c/map:channel.value[0,1,2,3...5]=101/' usleep 2

By utilizing the basic facilities in bpf-loader.c which allow setting
different slots in a BPF map separately, the newly introduced syntax
allows perf to control specific elements in a BPF map.

Test result:

  # cat ./test_bpf_map_3.c
  /************************ BEGIN **************************/
  #include <uapi/linux/bpf.h>
  #define SEC(NAME) __attribute__((section(NAME), used))
  struct bpf_map_def {
	unsigned int type;
	unsigned int key_size;
	unsigned int value_size;
	unsigned int max_entries;
  };
  static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
 	(void *)BPF_FUNC_map_lookup_elem;
  static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
 	(void *)BPF_FUNC_trace_printk;
  struct bpf_map_def SEC("maps") channel = {
 	.type = BPF_MAP_TYPE_ARRAY,
 	.key_size = sizeof(int),
 	.value_size = sizeof(unsigned char),
 	.max_entries = 100,
  };
  SEC("func=hrtimer_nanosleep rqtp->tv_nsec")
  int func(void *ctx, int err, long nsec)
  {
 	char fmt[] = "%ld\n";
 	long usec = nsec * 0x10624dd3 >> 38; // nsec / 1000
 	int key = (int)usec;
 	unsigned char *pval = map_lookup_elem(&channel, &key);

 	if (!pval)
 		return 0;
 	trace_printk(fmt, sizeof(fmt), (unsigned char)*pval);
 	return 0;
  }
  char _license[] SEC("license") = "GPL";
  int _version SEC("version") = LINUX_VERSION_CODE;
  /************************* END ***************************/

Normal case:

  # echo "" > /sys/kernel/debug/tracing/trace
  # ./perf record -e './test_bpf_map_3.c/map:channel.value[0,1,2,3...5]=101/' usleep 2
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.012 MB perf.data ]
  # cat /sys/kernel/debug/tracing/trace | grep usleep
            usleep-405   [004] d... 2745423.547822: : 101
  # ./perf record -e './test_bpf_map_3.c/map:channel.value[0...9,20...29]=102,map:channel.value[10...19]=103/' usleep 3
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.012 MB perf.data ]
  # ./perf record -e './test_bpf_map_3.c/map:channel.value[0...9,20...29]=102,map:channel.value[10...19]=103/' usleep 15
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.012 MB perf.data ]
  # cat /sys/kernel/debug/tracing/trace | grep usleep
            usleep-405   [004] d... 2745423.547822: : 101
            usleep-655   [006] d... 2745434.122814: : 102
            usleep-904   [006] d... 2745439.916264: : 103
  # ./perf record -e './test_bpf_map_3.c/map:channel.value[all]=104/' usleep 99
  # cat /sys/kernel/debug/tracing/trace | grep usleep
            usleep-405   [004] d... 2745423.547822: : 101
            usleep-655   [006] d... 2745434.122814: : 102
            usleep-904   [006] d... 2745439.916264: : 103
            usleep-1537  [003] d... 2745538.053737: : 104

Error case:

  # ./perf record -e './test_bpf_map_3.c/map:channel.value[10...1000]=104/' usleep 99
  event syntax error: '..annel.value[10...1000]=104/'
                                   \___ Index too large
  Hint:	Valid config terms:
      	map:[<arraymap>].value<indices>=[value]
      	map:[<eventmap>].event<indices>=[event]

      	where <indices> is something like [0,3...5] or [all]
      	(add -v to see detail)
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-9-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e571e029
    • W
      perf tools: Enable BPF object configure syntax · a34f3be7
      由 Wang Nan 提交于 
      This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.

After this patch, following syntax is available:

  # perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...

It would takes effect after appling following commits.

Test result:

  # cat ./test_bpf_map_1.c
  /************************ BEGIN **************************/
  #include <uapi/linux/bpf.h>
  #define SEC(NAME) __attribute__((section(NAME), used))
  struct bpf_map_def {
      unsigned int type;
      unsigned int key_size;
      unsigned int value_size;
      unsigned int max_entries;
  };
  static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
      (void *)BPF_FUNC_map_lookup_elem;
  static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
      (void *)BPF_FUNC_trace_printk;
  struct bpf_map_def SEC("maps") channel = {
      .type = BPF_MAP_TYPE_ARRAY,
      .key_size = sizeof(int),
      .value_size = sizeof(int),
      .max_entries = 1,
  };
  SEC("func=sys_nanosleep")
  int func(void *ctx)
  {
      int key = 0;
      char fmt[] = "%d\n";
      int *pval = map_lookup_elem(&channel, &key);
      if (!pval)
          return 0;
      trace_printk(fmt, sizeof(fmt), *pval);
      return 0;
  }
  char _license[] SEC("license") = "GPL";
  int _version SEC("version") = LINUX_VERSION_CODE;
  /************************* END ***************************/

 - Normal case:
  # ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.012 MB perf.data ]

 - Error case:

  # ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
  event syntax error: '..ps:channel:value/'
                                   \___ Config value not set (missing '=')
  Hint:	Valid config term:
         map:[<arraymap>]:value=[value]
         (add -v to see detail)
  Run 'perf list' for a list of valid events

  Usage: perf record [<options>] [<command>]
     or: perf record [<options>] -- <command> [<options>]

     -e, --event <event>   event selector. use 'perf list' to list available events

  # ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
  event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
                                    \___ Invalid object config option
  [SNIP]

  # ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
  event syntax error: '..p_1.c/map:xchannel.value=10/'
                                    \___ Target map not exist
  [SNIP]

  # ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
  event syntax error: '..ps:channel.xvalue=10/'
                                    \___ Invalid object map config option
  [SNIP]

  # ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
  event syntax error: '..nnel.value=x10/'
                                    \___ Incorrect value type for map
  [SNIP]

  Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:

  # ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
  event syntax error: '..ps:channel.value=10/'
                                    \___ Can't use this config term to this type of map

  Hint:	Valid config term:
      	map:[<arraymap>].value=[value]
      	(add -v to see detail)
Signed-off-by: NWang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.comSigned-off-by: NHe Kuang <hekuang@huawei.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a34f3be7
  33. 20 2月, 2016 3 次提交
    • W
      perf tools: Enable config and setting names for legacy cache events · 43d0b978
      由 Wang Nan 提交于 
      This patch allows setting config terms for legacy cache events.
For example:

  # perf stat -e L1-icache-misses/name=valA/ -e branches/name=valB/ ls
  ...
   Performance counter stats for 'ls':

              11299      valA
             451605      valB

        0.000779091 seconds time elapsed

  # perf record -e cache-misses/name=inh/ -e cache-misses/name=noinh,no-inherit/ bash
  # ls
  # exit
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.023 MB perf.data (131 samples) ]
  # perf report --stdio | grep -B 1 'Event count'
  # Samples: 105  of event 'inh'
  # Event count (approx.): 109118
  --
  # Samples: 26  of event 'noinh'
  # Event count (approx.): 48302

A test case is introduced to test this feature.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-14-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      43d0b978
    • W
      perf tools: Enable config raw and numeric events · 10bf358a
      由 Wang Nan 提交于 
      This patch allows setting config terms for raw and numeric events.
For example:

  # perf stat -e cycles/name=cyc/ ls
  ...
  1821108      cyc
  ...

  # perf stat -e r6530160/name=event/ ls
  ...
  1103195      event
  ...

  # perf record -e cycles -e 4:0x6530160/name=evtx,call-graph=fp/ -a sleep 1
  ...
  # perf report --stdio
  ...
  # Samples: 124  of event 'cycles'
  46.61%     0.00%  swapper        [kernel.vmlinux]            [k] cpu_startup_entry
  41.26%     0.00%  swapper        [kernel.vmlinux]            [k] start_secondary
  ...
  # Samples: 91  of event 'evtx'
  ...
  93.76%     0.00%  swapper      [kernel.vmlinux]            [k] cpu_startup_entry
          |
          ---cpu_startup_entry
             |
             |--66.63%--call_cpuidle
             |          cpuidle_enter
             |          |
  ...

3 test cases are introduced to test config terms for symbol, raw and
numeric events.

Committer note:

Further testing shows that we can retrieve the event name using 'perf
evlist -v' and looking at the 'config' perf_event_attr field, i.e.:

  # perf record -e cycles -e 4:0x6530160/name=evtx,call-graph=fp/ -a sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.724 MB perf.data (2076 samples) ]
  # perf evlist
  cycles
  evtx
  # perf evlist -v
  cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
evtx: type: 4, size: 112, config: 0x6530160, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
  #
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-13-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      10bf358a
    • A
      perf tools: Introduce opt_event_config nonterminal · 1d55e8ef
      由 Arnaldo Carvalho de Melo 提交于 
      To remove duplicated code that differs only in using the matching
'/a,b,c/' part or NULL if no event configuration is done ('//' or no
pair of slashes at all).

Will be used by some new targets allowing the configuration of hardware
events, etc.

Lifted part of the 'opt_event_config' nonterminal from a patch by Wang
Nan.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-e3xzpx9cqsmwnaguaxyw6r42@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1d55e8ef
  35. 13 2月, 2016 1 次提交
  37. 30 10月, 2015 1 次提交
    • W
      perf tools: Compile scriptlets to BPF objects when passing '.c' to --event · d509db04
      由 Wang Nan 提交于 
      This patch provides infrastructure for passing source files to --event
directly using:

 # perf record --event bpf-file.c command

This patch does following works:

 1) Allow passing '.c' file to '--event'. parse_events_load_bpf() is
    expanded to allow caller tell it whether the passed file is source
    file or object.

 2) llvm__compile_bpf() is called to compile the '.c' file, the result
    is saved into memory. Use bpf_object__open_buffer() to load the
    in-memory object.

Introduces a bpf-script-example.c so we can manually test it:

 # perf record --clang-opt "-DLINUX_VERSION_CODE=0x40200" --event ./bpf-script-example.c sleep 1

Note that '--clang-opt' must put before '--event'.

Futher patches will merge it into a testcase so can be tested automatically.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-10-git-send-email-wangnan0@huawei.comSigned-off-by: NHe Kuang <hekuang@huawei.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d509db04
  39. 28 10月, 2015 1 次提交
    • W
      perf tools: Enable passing bpf object file to --event · 84c86ca1
      由 Wang Nan 提交于 
      By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.

After applying this patch, commands like:

 # perf record --event foo.o sleep

become possible.

However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented.  Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.

Commiter notes:

Using it:

  $ ls -la foo.o
  ls: cannot access foo.o: No such file or directory
  $ perf record --event foo.o sleep
  libbpf: failed to open foo.o: No such file or directory
  event syntax error: 'foo.o'
                       \___ BPF object file 'foo.o' is invalid

  (add -v to see detail)
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events
  $

  $ file /tmp/build/perf/perf.o
  /tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
  $ perf record --event /tmp/build/perf/perf.o sleep
  libbpf: /tmp/build/perf/perf.o is not an eBPF object file
  event syntax error: '/tmp/build/perf/perf.o'
                       \___ BPF object file '/tmp/build/perf/perf.o' is invalid

  (add -v to see detail)
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events
  $

  $ file /tmp/foo.o
  /tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
  $ perf record --event /tmp/foo.o sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.013 MB perf.data ]
  $ perf evlist
  /tmp/foo.o
  $ perf evlist  -v
  /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  $

So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.

  $ perf report --stdio
  Error:
  The perf.data file has no samples!
  # To display the perf.data header info, please use --header/--header-only options.
  #
  $
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      84c86ca1
  41. 29 9月, 2015 2 次提交
    • H
      perf tools: Enable event_config terms to tracepoint events · e637d177
      由 He Kuang 提交于 
      This patch enables config terms for tracepoint perf events. Valid terms
for tracepoint events are 'call-graph' and 'stack-size', so we can use
different callgraph settings for each event and eliminate unnecessary
overhead.

Here is an example for using different call-graph config for each
tracepoint.

  $ perf record -e syscalls:sys_enter_write/call-graph=fp/
                -e syscalls:sys_exit_write/call-graph=no/
                dd if=/dev/zero of=test bs=4k count=10

  $ perf report --stdio

  #
  # Total Lost Samples: 0
  #
  # Samples: 13  of event 'syscalls:sys_enter_write'
  # Event count (approx.): 13
  #
  # Children      Self  Command  Shared Object       Symbol
  # ........  ........  .......  ..................  ......................
  #
      76.92%    76.92%  dd       libpthread-2.20.so  [.] __write_nocancel
                   |
                   ---__write_nocancel

      23.08%    23.08%  dd       libc-2.20.so        [.] write
                   |
                   ---write
                      |
                      |--33.33%-- 0x2031342820736574
                      |
                      |--33.33%-- 0xa6e69207364726f
                      |
                       --33.33%-- 0x34202c7320393039
  ...

  # Samples: 13  of event 'syscalls:sys_exit_write'
  # Event count (approx.): 13
  #
  # Children      Self  Command  Shared Object       Symbol
  # ........  ........  .......  ..................  ......................
  #
      76.92%    76.92%  dd       libpthread-2.20.so  [.] __write_nocancel
      23.08%    23.08%  dd       libc-2.20.so        [.] write
       7.69%     0.00%  dd       [unknown]           [.] 0x0a6e69207364726f
       7.69%     0.00%  dd       [unknown]           [.] 0x2031342820736574
       7.69%     0.00%  dd       [unknown]           [.] 0x34202c7320393039
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-4-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e637d177
    • H
      perf tools: Adds the tracepoint name parsing support · 865582c3
      由 He Kuang 提交于 
      Adds rules for parsing tracepoint names. Change rules of tracepoint which
derives from PE_NAMEs into tracepoint names directly, so adding more rules
based on tracepoint names will be easier.

Changes v2-v3:
   - Change __event_legacy_tracepoint label in bison file to tracepoint_name
   - Fix formats error.
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-3-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      865582c3
  43. 15 9月, 2015 2 次提交
  45. 02 9月, 2015 1 次提交
  47. 27 5月, 2015 1 次提交
  49. 29 4月, 2015 4 次提交