stable inclusion
from stable-5.10.46
commit 019ab7d044d0ebf97e1236bb8935b7809be92358
bugzilla: 168323
CVE: NA

--------------------------------

commit 6aa32217 upstream.

With the skb pointer piggy-backed on the TX BD, we have a simple and
efficient way to free the skb buffer when the frame has been transmitted.
But in order to avoid freeing the skb while there are still fragments from
the skb in use, we need to piggy-back on the TX BD of the skb, not the
first.

Without this, we are doing use-after-free on the DMA side, when the first
BD of a multi TX BD packet is seen as completed in xmit_done, and the
remaining BDs are still being processed.

Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

platform_get_resource() may fail and in this case a NULL dereference
will occur.

Fix it to use devm_platform_ioremap_resource() instead of calling
platform_get_resource() and devm_ioremap().

This is detected by Coccinelle semantic patch.

@@
expression pdev, res, n, t, e, e1, e2;
@@

res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t, n);
+ if (!res)
+   return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);

Fixes: 8425c41d ("net: ll_temac: Extend support to non-device-tree platforms")
Signed-off-by: NZhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As part of the W=1 series for ethernet, these drivers were
discovered to be using kdoc style comments but were not actually
doing kdoc. The kernel uses kdoc style when documenting code, not
doxygen or other styles.

Fixed Warnings:
drivers/net/ethernet/amazon/ena/ena_com.c:613: warning: Function parameter or member 'ena_dev' not described in 'ena_com_set_llq'
drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c:1540: warning: Cannot understand  * @brief Set VLAN filter table
drivers/net/ethernet/xilinx/ll_temac_main.c:114: warning: Function parameter or member 'lp' not described in 'temac_indirect_busywait'
drivers/net/ethernet/xilinx/ll_temac_main.c:129: warning: Function parameter or member 'lp' not described in 'temac_indirect_in32'
drivers/net/ethernet/xilinx/ll_temac_main.c:129: warning: Function parameter or member 'reg' not described in 'temac_indirect_in32'
drivers/net/ethernet/xilinx/ll_temac_main.c:147: warning: Function parameter or member 'lp' not described in 'temac_indirect_in32_locked'
drivers/net/ethernet/xilinx/ll_temac_main.c:147: warning: Function parameter or member 'reg' not described in 'temac_indirect_in32_locked'
drivers/net/ethernet/xilinx/ll_temac_main.c:172: warning: Function parameter or member 'lp' not described in 'temac_indirect_out32'
drivers/net/ethernet/xilinx/ll_temac_main.c:172: warning: Function parameter or member 'reg' not described in 'temac_indirect_out32'
drivers/net/ethernet/xilinx/ll_temac_main.c:172: warning: Function parameter or member 'value' not described in 'temac_indirect_out32'
drivers/net/ethernet/xilinx/ll_temac_main.c:188: warning: Function parameter or member 'lp' not described in 'temac_indirect_out32_locked'
drivers/net/ethernet/xilinx/ll_temac_main.c:188: warning: Function parameter or member 'reg' not described in 'temac_indirect_out32_locked'
drivers/net/ethernet/xilinx/ll_temac_main.c:188: warning: Function parameter or member 'value' not described in 'temac_indirect_out32_locked'
drivers/net/ethernet/xilinx/ll_temac_main.c:212: warning: Function parameter or member 'lp' not described in 'temac_dma_in32_be'
drivers/net/ethernet/xilinx/ll_temac_main.c:212: warning: Function parameter or member 'reg' not described in 'temac_dma_in32_be'
drivers/net/ethernet/xilinx/ll_temac_main.c:228: warning: Function parameter or member 'lp' not described in 'temac_dma_out32_be'
drivers/net/ethernet/xilinx/ll_temac_main.c:228: warning: Function parameter or member 'reg' not described in 'temac_dma_out32_be'
drivers/net/ethernet/xilinx/ll_temac_main.c:228: warning: Function parameter or member 'value' not described in 'temac_dma_out32_be'
drivers/net/ethernet/xilinx/ll_temac_main.c:247: warning: Function parameter or member 'lp' not described in 'temac_dma_dcr_in'
drivers/net/ethernet/xilinx/ll_temac_main.c:247: warning: Function parameter or member 'reg' not described in 'temac_dma_dcr_in'
drivers/net/ethernet/xilinx/ll_temac_main.c:255: warning: Function parameter or member 'lp' not described in 'temac_dma_dcr_out'
drivers/net/ethernet/xilinx/ll_temac_main.c:255: warning: Function parameter or member 'reg' not described in 'temac_dma_dcr_out'
drivers/net/ethernet/xilinx/ll_temac_main.c:255: warning: Function parameter or member 'value' not described in 'temac_dma_dcr_out'
drivers/net/ethernet/xilinx/ll_temac_main.c:265: warning: Function parameter or member 'lp' not described in 'temac_dcr_setup'
drivers/net/ethernet/xilinx/ll_temac_main.c:265: warning: Function parameter or member 'op' not described in 'temac_dcr_setup'
drivers/net/ethernet/xilinx/ll_temac_main.c:265: warning: Function parameter or member 'np' not described in 'temac_dcr_setup'
drivers/net/ethernet/xilinx/ll_temac_main.c:300: warning: Function parameter or member 'ndev' not described in 'temac_dma_bd_release'
drivers/net/ethernet/xilinx/ll_temac_main.c:330: warning: Function parameter or member 'ndev' not described in 'temac_dma_bd_init'
drivers/net/ethernet/xilinx/ll_temac_main.c:600: warning: Function parameter or member 'ndev' not described in 'temac_setoptions'
drivers/net/ethernet/xilinx/ll_temac_main.c:600: warning: Function parameter or member 'options' not described in 'temac_setoptions'
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

platform_get_resource() may fail and return NULL, so we had better
check its return value to avoid a NULL pointer dereference a bit later
in the code. Fix it to use devm_platform_ioremap_resource_byname()
instead of calling platform_get_resource_byname() and devm_ioremap().

Fixes: 8425c41d ("net: ll_temac: Extend support to non-device-tree platforms")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NWang Hai <wanghai38@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case of error, the function devm_ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Acked-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver already correctly rejected all unsupported
parameters. No functional changes.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Please note that the delays are calculated based on typical
parameters.  But as TEMAC is an HDL IP, designs may vary, and future
work might be needed to make this calculation configurable.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for setting the RX and TX ring sizes for this driver using
ethtool. Also increase the default RX ring size as the previous default
was far too low for good performance in some configurations.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The start_p variable was included in the initial commit,
commit 92744989 ("net: add Xilinx ll_temac device driver"),
but has never had any real use.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The tx_bd_next field was included in the initial commit,
commit 92744989 ("net: add Xilinx ll_temac device driver"),
but has never had any real use.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SDMA engine used by TEMAC halts operation when it has finished
processing of the last buffer descriptor in the buffer ring.
Unfortunately, no interrupt event is generated when this happens,
so we need to setup another mechanism to make sure DMA operation is
restarted when enough buffers have been added to the ring.

Fixes: 92744989 ("net: add Xilinx ll_temac device driver")
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Failures caused by GFP_ATOMIC memory pressure have been observed, and
due to the missing error handling, results in kernel crash such as

[1876998.350133] kernel BUG at mm/slub.c:3952!
[1876998.350141] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[1876998.350147] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.3.0-scnxt #1
[1876998.350150] Hardware name: N/A N/A/COMe-bIP2, BIOS CCR2R920 03/01/2017
[1876998.350160] RIP: 0010:kfree+0x1ca/0x220
[1876998.350164] Code: 85 db 74 49 48 8b 95 68 01 00 00 48 31 c2 48 89 10 e9 d7 fe ff ff 49 8b 04 24 a9 00 00 01 00 75 0b 49 8b 44 24 08 a8 01 75 02 <0f> 0b 49 8b 04 24 31 f6 a9 00 00 01 00 74 06 41 0f b6 74 24
 5b
[1876998.350172] RSP: 0018:ffffc900000f0df0 EFLAGS: 00010246
[1876998.350177] RAX: ffffea00027f0708 RBX: ffff888008d78000 RCX: 0000000000391372
[1876998.350181] RDX: 0000000000000000 RSI: ffffe8ffffd01400 RDI: ffff888008d78000
[1876998.350185] RBP: ffff8881185a5d00 R08: ffffc90000087dd8 R09: 000000000000280a
[1876998.350189] R10: 0000000000000002 R11: 0000000000000000 R12: ffffea0000235e00
[1876998.350193] R13: ffff8881185438a0 R14: 0000000000000000 R15: ffff888118543870
[1876998.350198] FS:  0000000000000000(0000) GS:ffff88811f300000(0000) knlGS:0000000000000000
[1876998.350203] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
s#1 Part1
[1876998.350206] CR2: 00007f8dac7b09f0 CR3: 000000011e20a006 CR4: 00000000001606e0
[1876998.350210] Call Trace:
[1876998.350215]  <IRQ>
[1876998.350224]  ? __netif_receive_skb_core+0x70a/0x920
[1876998.350229]  kfree_skb+0x32/0xb0
[1876998.350234]  __netif_receive_skb_core+0x70a/0x920
[1876998.350240]  __netif_receive_skb_one_core+0x36/0x80
[1876998.350245]  process_backlog+0x8b/0x150
[1876998.350250]  net_rx_action+0xf7/0x340
[1876998.350255]  __do_softirq+0x10f/0x353
[1876998.350262]  irq_exit+0xb2/0xc0
[1876998.350265]  do_IRQ+0x77/0xd0
[1876998.350271]  common_interrupt+0xf/0xf
[1876998.350274]  </IRQ>

In order to handle such failures more graceful, this change splits the
receive loop into one for consuming the received buffers, and one for
allocating new buffers.

When GFP_ATOMIC allocations fail, the receive will continue with the
buffers that is still there, and with the expectation that the allocations
will succeed in a later call to receive.

Fixes: 92744989 ("net: add Xilinx ll_temac device driver")
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds error handling to the remaining dma_map_single() calls, so that
behavior is well defined if/when we run out of DMA memory.

Fixes: 92744989 ("net: add Xilinx ll_temac device driver")
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is possible that the interrupt handler fires and frees up space in
the TX ring in between checking for sufficient TX ring space and
stopping the TX queue in temac_start_xmit. If this happens, the
queue wake from the interrupt handler will occur before the queue is
stopped, causing a lost wakeup and the adapter's transmit hanging.

To avoid this, after stopping the queue, check again whether there is
sufficient space in the TX ring. If so, wake up the queue again.

This is a port of the similar fix in axienet driver,
commit 7de44285 ("net: axienet: Fix race condition causing TX hang").

Fixes: 23ecc4bd ("net: ll_temac: fix checksum offload logic")
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert suitable drivers to use new helper phy_do_ioctl_running.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Acked-by: NTimur Tabi <timur@kernel.org>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Fixes: 1b3fa5cf ("net: ll_temac: Cleanup multicast filter on change")
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Multicast support have been tested and is working now.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid leaving old address table entries when using multicast.  If more than
one multicast address were removed, only the first removed address would
actually be cleared.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With .ndo_set_rx_mode/temac_set_multicast_list() being called in atomic
context (holding addr_list_lock), and temac_set_multicast_list() needing
to access temac indirect registers, the mutex used to synchronize indirect
register is a no-no.

Replace it with a spinlock, and avoid sleeping in
temac_indirect_busywait().

To avoid excessive holding of the lock, which is now a spinlock, the
temac_device_reset() function is changed to only hold the lock for short
periods.  With timeouts, it could be holding the spinlock for more than
2 seconds.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When user has requested IFF_ALLMULTI or have set more than 4 multicast
addresses, we should just use promiscuous mode, but not set it in flags,
as it causes the interface to stay in promiscuous mode even when the
non-IFF_PROMISC condition that caused promiscuous mode to be enabled
has gone away.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes following (similar) warning reported by kbuild test robot:

 In function ‘memcpy’,
  inlined from ‘smsc75xx_init_mac_address’ at drivers/net/usb/smsc75xx.c:778:3,
  inlined from ‘smsc75xx_bind’ at drivers/net/usb/smsc75xx.c:1501:2:
  ./include/linux/string.h:355:9: warning: argument 2 null where non-null expected [-Wnonnull]
  return __builtin_memcpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/net/usb/smsc75xx.c: In function ‘smsc75xx_bind’:
  ./include/linux/string.h:355:9: note: in a call to built-in function ‘__builtin_memcpy’

I've replaced the offending memcpy with ether_addr_copy, because I'm
100% sure, that of_get_mac_address can't return NULL as it returns valid
pointer or ERR_PTR encoded value, nothing else.

I'm hesitant to just change IS_ERR into IS_ERR_OR_NULL check, as this
would make the warning disappear also, but it would be confusing to
check for impossible return value just to make a compiler happy.

I'm now changing all occurencies of memcpy to ether_addr_copy after the
of_get_mac_address call, as it's very likely, that we're going to get
similar reports from kbuild test robot in the future.

Fixes: a51645f7 ("net: ethernet: support of_get_mac_address new ERR_PTR error")
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NPetr Štetiar <ynezz@true.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The channel status register value can be very helpful when debugging
SDMA problems.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There was NVMEM support added to of_get_mac_address, so it could now
return ERR_PTR encoded error values, so we need to adjust all current
users of of_get_mac_address to this new fact.

While at it, remove superfluous is_valid_ether_addr as the MAC address
returned from of_get_mac_address is always valid and checked by
is_valid_ether_addr anyway.

Fixes: d01f449c ("of_net: add NVMEM support to of_get_mac_address")
Signed-off-by: NPetr Štetiar <ynezz@true.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix sparse warnings:

drivers/net/ethernet/xilinx/ll_temac_main.c:66:5: warning: symbol '_temac_ior_be' was not declared. Should it be static?
drivers/net/ethernet/xilinx/ll_temac_main.c:71:6: warning: symbol '_temac_iow_be' was not declared. Should it be static?
drivers/net/ethernet/xilinx/ll_temac_main.c:76:5: warning: symbol '_temac_ior_le' was not declared. Should it be static?
drivers/net/ethernet/xilinx/ll_temac_main.c:81:6: warning: symbol '_temac_iow_le' was not declared. Should it be static?
drivers/net/ethernet/xilinx/ll_temac_main.c:648:6: warning: symbol 'ptr_to_txbd' was not declared. Should it be static?
drivers/net/ethernet/xilinx/ll_temac_main.c:654:6: warning: symbol 'ptr_from_txbd' was not declared. Should it be static?
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The phy_connect() function doesn't return NULL pointers.  It returns
error pointers on error, so I have updated the check.

Fixes: 8425c41d ("net: ll_temac: Extend support to non-device-tree platforms")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes: d84aec42 ("net: ll_temac: Fix support for 64-bit platforms")
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As soon as TAILDESCR_PTR is written, DMA transfers might start.
Let's ensure we are ready to receive DMA IRQ's before doing that.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This allows custom setup of IRQ coalescing for platforms using legacy
platform_device. The irq timeout and count parameters can be used for
tuning cpu load vs. latency.

I have maintained the 0x00000400 bit in TX_CHNL_CTRL.  It is specified as
unused in the documentation I have available.  It does not make any
difference in the hardware I have available, so it is left in to not risk
breaking other platforms where it might be used.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use usleep_range() to avoid problems with msleep() actually sleeping
much longer than expected.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As we are actually using a BD for both the skb and each frag contained in
it, the oldest TX BD would be overwritten when there was exactly one BD
less than needed.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unmap the actual buffer length, not the amount of data received, avoiding
resource exhaustion of swiotlb (seen on x86_64 platform).
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Indirect register access goes through a DCR bus bridge, which
allows only one outstanding transaction.  And to make matters
worse, each TEMAC IP block contains two Ethernet interfaces, and
although they seem to have separate registers for indirect access,
they actually share the registers.  Or to be more specific, MSW, LSW
and CTL registers are physically shared between Ethernet interfaces
in same TEMAC IP, with RDY register being (almost) specificic to
the Ethernet interface.  The 0x10000 bit in RDY reflects combined
bus ready state though.

So we need to take care to synchronize not only within a single
device, but also between devices in same TEMAC IP.

This commit allows to do that with legacy platform devices.

For OF devices, the xlnx,compound parent of the temac node should be
used to find siblings, and setup a shared indirect_mutex between them.
I will leave this work to somebody else, as I don't have hardware to
test that.  No regression is introduced by that, as before this commit
using two Ethernet interfaces in same TEMAC block is simply broken.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Both TEMAC and SDMA is big-endian, so make sure that all values in SDMA
buffer descriptors (cmdac_bd) are handled as big-endian, independent of the
host endianness. With all currently supported platforms being big-endian,
this change does not make a change for any of them.

Note, when using app3 and app4 for piggybacking skb pointers there is no
need to care about endianness, as neither TEMAC nor SDMA access app3 and
app4 in TX buffer descriptors.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the powerpc specific MMIO register access functions with the
generic big-endian mmio access functions, and add support for
little-endian access depending on configuration.

Big-endian access is maintained as the default, but little-endian can
be configured in device-tree binding or in platform data.

The temac_ior()/temac_iow() functions are replaced with macro wrappers
to avoid modifying existing code more than necessary.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The use of buffer descriptor APP4 field (32-bit) for storing skb pointer
obviously does not work on 64-bit platforms.
As APP3 is also unused, we can use that to store the other half of 64-bit
pointer values.

Contrary to what is hinted at in commit message of commit 15bfe05c
("net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit")
there are no other pointers stored in cdmac_bd.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support initialization with platdata, so the driver can be used on
non-device-tree platforms.

For currently supported device-tree platforms, the driver should behave
as before.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As a side effect, a few error cases are fixed.

If of_iomap() of sdma_regs failed, no error code was returned.  Fixed to
return -ENOMEM similar to of_iomap() fail of regs.

If sysfs_create_group() or register_netdev() failed, lp->phy_node was not
released.

Finally, the order in remove function is corrected to be reverse order
of what is done in probe, i.e. calling temac_mdio_teardown() last, so we
unregister the netdev that most likely is using the mdio_bus first.
Signed-off-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dev_consume_skb_irq() should be called when skb xmit done. It makes
drop profiles(dropwatch, perf) more friendly.
Signed-off-by: NYang Wei <yang.wei9@zte.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>