- 07 1月, 2009 5 次提交
-
-
由 David Schleef 提交于
This adds the Comedi core to the staging tree. This is a data acquision infrastructure for Linux, providing a common interface for these types of drivers. Taken directly from the comedi git tree, with only minor tweaks by Greg to get it to build properly within the kernel tree. From: David Schleef <ds@schleef.org> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Shawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NFrank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Subbu Seetharaman 提交于
Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This is the Ralink RT2860 driver from the company that does horrible things like reading a config file from /etc. However, the driver that is currently under development from the wireless development community is not working at all yet, so distros and users are using this version instead (quite common hardware on a lot of netbook machines). So here is this driver, for now, until the wireless developers get a "clean" version into the main tree, or until this version is cleaned up sufficiently to move out of the staging tree. Ported to the Linux build system and cleaned up a bit already by me. Cc: Linux wireless <linux-wireless@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Luis R. Rodriguez 提交于
Initial dump of the otus USB wireless network driver. It builds properly, but a lot of work needs to be done cleaning it up before it can be merged into the wireless driver tree. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Li YanBo 提交于
This driver is for the Airgo AGNX00 wireless chip. From: Li YanBo <dreamfly281@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 18 12月, 2008 1 次提交
-
-
由 Dmitry Baryshkov 提交于
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 10 11月, 2008 1 次提交
-
-
由 Linus Torvalds 提交于
The "Exclude staging drivers" question is there so that we don't build staging drivers for allyesconfig or allnoconfig settings, but it's very irritating when you've already said "no" to staging drivers earlier. There is absolutely no point in declining twice - once you've declined the staging drivers, you're done. So make the second question depend on the first question having been answered in the affirmative. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 11月, 2008 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This Kconfig change allows the common 'make allmodconfig' and 'make allyesconfig' build options to skip the staging tree, which is probably what you want to have happen anyway. This makes the linux-next developer's life a lot easier so he doesn't have to worry about changes that break the staging tree, that's for me to worry about... Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 24 10月, 2008 1 次提交
-
-
由 Len Brown 提交于
pcc_acpi is based on an old version of drivers/misc/panasonic-laptop.c Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 23 10月, 2008 2 次提交
-
-
由 Vijay Kumar 提交于
This is the first cut at a driver for the Redrapids Pocket Change CardBus devices. Receiving data seems to work properly, but overflows happen on transmit. Still needs more hardware debugging to work properly. (cleaned up to use proper driver core api functions by Greg) From: Vijay Kumar <vijaykumar@bravegnu.org> Cc: Alexey Zaytsev <alexey.zaytsev@gmail.com> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Ken Sienski <sienski@redrapids.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hiroshi Miura 提交于
Adds the pcc-acpi driver to the staging tree. From: Hiroshi Miura <miura@da-cha.org> Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 14 10月, 2008 1 次提交
-
-
由 Pavel Roskin 提交于
Add the at76_usb wireless driver to the staging tree while the other kernel driver (out of tree) gets rewritten to use the internal wireless stack. This patch comes directly from the Fedora kernel tree, with only the directory placement of the files changed. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 11 10月, 2008 10 次提交
-
-
由 David Rowe 提交于
This is used by mISDN and Zaptel drivers. From: Steve Underwood <steveu@coppice.org> From: David Rowe <david@rowetel.com> Cc: Tzafrir Cohen <tzafrir.cohen@xorcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This adds the wlan-ng prism2 USB driver to the drivers/staging tree. The code was originally written by the linux-wlan-ng team, patched by some Novell engineers to properly work on newer kernels, and then hacked into place in order to get it to build properly in a single subdirectory within the kernel tree by me. It supports a wide range of older USB prism2 devices, and contains a 80211 stack to support this single driver. Cc: Christian Zoz <zoz@suse.de> Cc: Andreas Gruenbacher <agruen@suse.de> Cc: linux-wireless <linux-wireless@vger.kernel.org> Cc: John Linville <linville@tuxdriver.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: linux-wlan-ng <solomon@linux-wlan.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pavel Machek 提交于
This is driver for w35und usb wifi -- also in kohjinsha subnotebook. It should work well enough to associate and ping, but it obviously needs to be rewritten two more times... OTOH worst horrors (like embedded wifi stack) should have been fixed already... Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Takahiro Hirofuchi 提交于
This adds the common functions needed by both the host and client side of the USB/IP code. Brian Merrell cleaned up a lot of this code and submitted it for inclusion. Greg also did a lot of cleanup. Signed-off-by: NBrian G. Merrell <bgmerrell@novell.com> Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Todo: - checkpatch.pl cleanups - sparse cleanups - lots of little modules, should be merged together and added to the build. - testing? - handle churn in v4l layer. Many thanks to Ross Cohen <rcohen@snurgle.org> for cleanup patches on this driver. Cc: Ross Cohen <rcohen@snurgle.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Originally written by Guenter Gebhardt <g.gebhardt@meilhaus.de> TODO: - checkpatch.pl cleanups - sparse cleanups - possible /proc interaction cleanups - more info needed for Kconfig entry - real device id? - module parameter cleanup Cc: Wolfgang Beiter <w.beiter@aon.at> Cc: Guenter Gebhardt <g.gebhardt@meilhaus.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This is the first rough cut at a driver for the Alacritech SLIC Technology Non-Accelerated 10Gbe network driver TODO: - lindent the code - remove typedefs - remove wrappers - checkpatch.pl cleanups - new functionality that the card needs Cc: Christopher Harrer <charrer@alacritech.com> Cc: Michael Miles <mmiles@alacritech.com> Cc: Christopher Harrer <charrer@alacritech.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This adds the Alacritech slicoss driver to the tree. This driver is supposed to support: Mojave cards (single port PCI Gigabit) both copper and fiber Oasis cards (single and dual port PCI-x Gigabit) copper and fiber Kalahari cards (dual and quad port PCI-e Gigabit) copper and fiber The driver was acutally tested on Oasis and Kalahari cards. TODO: - move firmware loading to request_firmware() - remove direct memory access of structures - any remaining sparse and checkpatch.pl warnings - any netdev recommended changes Many thanks to Lior Dotan <liodot@gmail.com> for help with the cleanup of this driver. Cc: Lior Dotan <liodot@gmail.com> Cc: Christopher Harrer <charrer@alacritech.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This is a driver for the ET1310 network device. Based on the driver found at https://sourceforge.net/projects/et131x/ Cleaned up immensely by Olaf Hartman <o.hartmann@telovital.com> and Christoph Hellwig <hch@infradead.org> Note, the powermanagement options were removed from the vendor provided driver as they did not build properly at the time. TODO: - kernel coding style cleanups - forward port for latest network driver changes - kill useless typecasts (e.g. in et1310_phy.c) - alloc_etherdev is initializing memory with zero?!? - add_timer call in et131x_netdev.c is correct? - Add power saving functionality (suspend, sleep, resume) - Implement a few more kernel Parameter (set mac ) Cc: Olaf Hartmann <o.hartmann@telovital.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dean Adams <dadams1969@gmail.com> Cc: Victor Soriano <vjsoriano@agere.com> Cc: Andre-Sebastian Liebe <andre@lianse.eu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This hooks up the drivers/staging directory to the build system Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-