- 06 11月, 2006 1 次提交
-
-
由 Randy Dunlap 提交于
drivers/net/Kconfig says: # All the following symbols are dependent on NETDEVICES - do not repeat # that for each of the symbols. so remove duplicate 'depends' uses of NETDEVICES. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 01 11月, 2006 1 次提交
-
-
由 Stephen Hemminger 提交于
The sky2 driver is no longer in experimental state. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 25 10月, 2006 1 次提交
-
-
由 Patrick McHardy 提交于
CRYPTO_MANAGER is selected automatically by CONFIG_ECB and CONFIG_CBC. config CRYPTO_ECB tristate "ECB support" select CRYPTO_BLKCIPHER select CRYPTO_MANAGER I've added CONFIG_ECB to the ones you mentioned and CONFIG_CBC to gssapi. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 22 10月, 2006 1 次提交
-
-
由 Li Yang 提交于
changes due to qe_lib changes include: o removed inclusion of platform header file o removed platform_device code, replaced with of_device o removed typedefs o uint -> u32 conversions o removed following defines: QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER, BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET because they hid sizeof/in_be32/out_be32 operations from the reader. o removed irrelevant comments, added others to resemble removed BD_ defines o const'd and uncasted all get_property() assignments bugfixes, courtesy of Scott Wood, include: - Read phy_address as a u32, not u8. - Match on type == "network" as well as compatible == "ucc_geth", as device_is_compatible() will only compare up to the length of the test string, allowing "ucc_geth_phy" to match as well. - fixes the MAC setting code in ucc_geth.c. The old code was overwriting and dereferencing random stack contents. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 04 10月, 2006 1 次提交
-
-
由 Matt LaPlante 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 29 9月, 2006 1 次提交
-
-
由 Randy Dunlap 提交于
Net devices should depend on NETDEVICES, so revert part of Paolo's previous patch. See http://marc.theaimsgroup.com/?l=linux-kernel&m=115566326218740&w=2 for history. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2006 2 次提交
-
-
由 Ralf Baechle 提交于
Code for the EV96100 evaluation board hasn't compiled since at least November 15, 2003, so it is being deleted as of 2.6.18 due to lack of a user base. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Dale Farnsworth 提交于
No 64-bit PPC_MULTIPLATFORM platforms use the mv643xx_eth driver, so build it only on PPC32. Signed-off-by: NDale Farnsworth <dale@farnsworth.org> Acked-by: NSven Luther <sl@bplan-gmbh.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 14 9月, 2006 2 次提交
-
-
由 Jan-Bernd Themann 提交于
Hi Jeff, I fixed the __iomem issue and tested the driver with sparse. Looks good so far. Thanks for your effort. Jan-Bernd Themann Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> drivers/net/Kconfig | 9 drivers/net/Makefile | 1 drivers/net/ehea/Makefile | 6 drivers/net/ehea/ehea.h | 447 ++++++ drivers/net/ehea/ehea_ethtool.c | 294 ++++ drivers/net/ehea/ehea_hcall.h | 51 drivers/net/ehea/ehea_hw.h | 287 ++++ drivers/net/ehea/ehea_main.c | 2654 ++++++++++++++++++++++++++++++++++++++++ drivers/net/ehea/ehea_phyp.c | 705 ++++++++++ drivers/net/ehea/ehea_phyp.h | 455 ++++++ drivers/net/ehea/ehea_qmr.c | 582 ++++++++ drivers/net/ehea/ehea_qmr.h | 358 +++++ 12 files changed, 5849 insertions(+) Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Don Fry 提交于
Implement NAPI changes to pcnet32 driver. Compile default is off. Listed as experimental. Len and Don both worked on a NAPI implementation and have both tested these changes. An e1000 blasting short packets to the pcnet32 will lockup Don's system until the receive storm stops. Without NAPI Len's system watchdog would expire causing the system to reboot. With NAPI the system will stay operational. Tested ia32 and ppc64. Tested '970A, '971, '972, '973, '975, '976, and '978. The Kconfig changes came from Len. Don is to blame for all the others. Signed-off-by: NLen Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: NDon Fry <brazilnut@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 06 9月, 2006 1 次提交
-
-
由 Brice Goglin 提交于
Update the firmware download URL in Kconfig to match the header in drivers/net/myri10ge/myri10ge.c. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 20 8月, 2006 2 次提交
-
-
由 Roger Luethi 提交于
Add NAPI support to the via-rhine driver so that it can handle higher speeds and doesn't get overloaded by interrupts as easily. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NRoger Luethi <rl@hellgate.ch> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Li Yang 提交于
QE(QUICC Engine) is a new generation communication coprocessor, which can be found on some of the latest Freescale PowerQUICC CPUs(e.g. MPC8360). The UCC(Unified Communications Controller) module of QE can work as gigabit Ethernet device. This patch provides driver for the device. Signed-off-by: NShlomi Gridish <gridish@freescale.com> Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 09 8月, 2006 1 次提交
-
-
由 Stephen Hemminger 提交于
Revised version of the forcedeth NAPI support. This version is based against netdev-2.6#upstream (after the MAC patches from Ayaz today). Can't use nv_disable_hw_interrupts because NAPI only wants to mask off receive irq's and leave the others alone. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 29 7月, 2006 1 次提交
-
-
由 Ron Mercer 提交于
This is a complementary network driver for our ISP4XXX parts. There is a concurrent effort underway to get the iSCSI driver (qla4xxx) integrated upstream as well. I have been through several iterations with the linux-netdev list and have had much response from Stephen Hemminger. - Built and tested using kernel 2.6.17-rc4. - The chip supports two ethernet and two iSCSI functions. - The functions ql_sem_lock, ql_sem_spinlock, ql_sem_unlock, and ql_wait_for_drvr_lock are used to protect resources that are shared across the network and iSCSI functions. This protection is mostly during chip initialization and resets, but also include link management. - The PHY/MII are not exported through ethtool due to the fact that the iSCSI function will control the common link at least 50% of the time. This driver has been through several iterations on the netdev list and we feel this driver is ready for inclusion in the upstream kernel. It has been built and tested on x86 and PPC64 platforms. Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 20 7月, 2006 1 次提交
-
-
由 Ralf Baechle 提交于
Convert selection of serial line header compression to use CONFIG_SLHC rather than makefile ifeq uglyness. This makes it easier to select the SLHC module from other code. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 23 6月, 2006 2 次提交
-
-
由 Sascha Hauer 提交于
This is a patch for the Hilscher netx builtin ethernet ports. The netx board support was merged into 2.6.17-git2. The netx is a arm926 based SoC. Signed-off-by: NRobert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> -- drivers/net/Kconfig | 11 drivers/net/Makefile | 1 drivers/net/netx-eth.c | 516 ++++++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-netx/eth.h | 27 ++ 4 files changed, 555 insertions(+) Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gary Zambrano 提交于
Deleted "EXPERIMENTAL" from b44 entry in Kconfig. Signed-off-by: NGary Zambrano <zambrano@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 21 6月, 2006 2 次提交
-
-
由 Geoff Levand 提交于
Creates new config variables PPC_CELL_NATIVE and PPC_IBM_CELL_BLADE. The existing CONFIG_PPC_CELL is now used to denote the generic Cell processor support. PPC_CELL = make descends into platforms/cell PPC_CELL_NATIVE = add bare metal support PPC_IBM_CELL_BLADE = add blade device drivers, etc. Also renames spu_priv1.c to spu_priv1_mmio.c. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jon Loeliger 提交于
Signed-off-by: NKriston Carson <KristonCarson@freescale.com> Signed-off-by: NXianghua Xiao <x.xiao@freescale.com> Signed-off-by: NJon Loeliger <jdl@freescale.com> Acked-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 18 6月, 2006 1 次提交
-
-
由 Michael Chan 提交于
Add functions to decompress firmware before loading to the internal CPUs. Compressing the firmware reduces the driver size significantly. Added file name length sanity check in the gzip header to prevent going past the end of buffer [suggested by DaveM]. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 6月, 2006 1 次提交
-
-
由 Herbert Valerio Riedel 提交于
convert au1000_eth driver to use PHY framework and garbage collected functions and identifiers that became unused/obsolete in the process Signed-off-by: NHerbert Valerio Riedel <hvr@gnu.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 11 6月, 2006 1 次提交
-
-
由 Andrew Morton 提交于
In file included from drivers/net/smc911x.c:84: drivers/net/smc911x.h:46:9: warning: "SMC_USE_16BIT" is not defined drivers/net/smc911x.h:60:9: warning: "SMC_USE_32BIT" is not defined drivers/net/smc911x.h:73:10: warning: "SMC_USE_PXA_DMA" is not defined drivers/net/smc911x.c: In function `smc911x_reset': drivers/net/smc911x.c:247: warning: implicit declaration of function `SMC_inl' drivers/net/smc911x.c:249: warning: implicit declaration of function `SMC_outl' Cc: Dustin McIntire <dustin@sensoria.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 24 5月, 2006 1 次提交
-
-
由 Brice Goglin 提交于
Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NAndrew J. Gallatin <gallatin@myri.com> drivers/net/Kconfig | 17 drivers/net/Makefile | 1 drivers/net/myri10ge/Makefile | 5 drivers/net/myri10ge/myri10ge.c | 2851 +++++++++++++++ drivers/net/myri10ge/myri10ge_mcp.h | 205 + drivers/net/myri10ge/myri10ge_mcp_gen_header.h | 58 include/linux/pci_ids.h | 1 7 files changed, 3138 insertions(+) Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 21 4月, 2006 1 次提交
-
-
由 Dustin McIntire 提交于
> > The patch was badly wordwrapped. Please fix and resend. > OK, I've fixed the wrapping and removed the CONFIG_ARM restriction. I've also did my best to modify the C style to conform to the comments. I noticed that the patch is getting ignored by majordomo due to its size >100K. Should it be broken up somehow to allow posting to the lists? Signed-off-by: NDustin McIntire <dustin@sensoria.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 01 4月, 2006 1 次提交
-
-
由 Al Viro 提交于
kconfig sanitized around drivers/net Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 3月, 2006 1 次提交
-
-
由 James Ring 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 17 3月, 2006 1 次提交
-
-
由 Christoph Hellwig 提交于
The spidernet drivers uses request_firmware() and thus needs to select FW_LOADER. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 12 3月, 2006 2 次提交
-
-
由 Adrian Bunk 提交于
This patch contains the following possible updates: - let FORCEDETH no longer depend on EXPERIMENTAL - remove the "Reverse Engineered" from the option text: for the user it's important which hardware the driver supports, not how it was developed Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jesper Juhl 提交于
Improve reference to PCI NE2K support in ISA NE2K documentation. Original 2.4 patch From: Ged Haywood <ged@jubileegroup.co.uk> Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 05 3月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
This documentation is mostly obsolete, and should therefore either be updated or removed (this patch does the latter). Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 04 3月, 2006 1 次提交
-
-
由 Dale Farnsworth 提交于
>From : Dale Farnsworth <dale@farnsworth.org> Recent patches for the mv643xx_eth driver now use the MII interface library. Select MII so it gets built when that driver is selected. Signed-off-by: NDale Farnsworth <dale@farnsworth.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 18 2月, 2006 2 次提交
-
-
由 Stephen Hemminger 提交于
Take the experimental dependency of skge driver, it is as stable as the others. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
The sk98lin driver was changed a while ago to remove support for the D-Link 530T card because that hardware has no working VPD data. The help text for Kconfig was not updated. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 17 2月, 2006 1 次提交
-
-
由 Jon Mason 提交于
This patch corrects a few spelling and grammar errors found in drivers/net Signed-off-by: NJon Mason <jdmason@us.ibm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 07 2月, 2006 1 次提交
-
-
Make the whole netdevices menu depend on NET, rather than having an empty submenu when networking is disabled. Indeed, almost the whole body of the menu was surrounded by if NETDEVICES, and what was outside depended on NETCONSOLE which is inside the menu. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 01 2月, 2006 1 次提交
-
-
由 Daniel Drake 提交于
Some users have commented that it is unclear which driver they should be using for their Marvell/SysKonnect network adapter, and which ones are/aren't interchangable. This patch attempts to reduce the confusion. Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 19 1月, 2006 2 次提交
-
-
*) mark as "EXPERIMENTAL" various items that either aren't very stable or that are actively crashing the setup of users which don't really need them (i.e. HIGHMEM and 3-level pagetables on x86 - nobody needs either, everybody reports "I'm using it and getting trouble"). *) move net/Kconfig near to the rest of network configurations, and drivers/block/Kconfig near "Block layer" submenu. *) it's useless and doesn't work well to force NETDEVICES on and to disable the prompt like it's done. Better remove the attempt, and change that to a simple "default y if UML". *) drop the warning about "report problems about HPPFS" - it's redundant anyway, as that's the usual procedure, and HPPFS users are especially technical (i.e. they know reporting bugs is _good_). Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesse Brandeburg 提交于
Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option and modified the Kconfig, to reflect the new option. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 15 1月, 2006 1 次提交
-
-
由 Deepak Saxena 提交于
This patch adds support for the Intel IXDP2351 to the CS89x0 driver. Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-