- 31 5月, 2014 8 次提交
-
-
由 J. Bruce Fields 提交于
Better variable name, some comments, etc. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Now that all op encoders can handle running out of space, we no longer need to check the remaining size for every operation; only nonidempotent operations need that check, and that can be done by nfsd4_check_resp_size. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
We're keeping the length updated as we go now, so there's no need for the extra calculation here. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Once we've included page-cache pages in the encoding it's difficult to remove them and restart encoding. (xdr_truncate_encode doesn't handle that case.) So, make sure we'll have adequate space to finish the operation first. For now COMPOUND_SLACK_SPACE checks should prevent this case happening, but we want to remove those checks. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
We've tried to prevent running out of space with COMPOUND_SLACK_SPACE and special checking in those operations (getattr) whose result can vary enormously. However: - COMPOUND_SLACK_SPACE may be difficult to maintain as we add more protocol. - BUG_ON or page faulting on failure seems overly fragile. - Especially in the 4.1 case, we prefer not to fail compounds just because the returned result came *close* to session limits. (Though perfect enforcement here may be difficult.) - I'd prefer encoding to be uniform for all encoders instead of having special exceptions for encoders containing, for example, attributes. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Normally xdr encoding proceeds in a single pass from start of a buffer to end, but sometimes we have to write a few bytes to an earlier position. Use write_bytes_to_xdr_buf for these cases rather than saving a pointer to write to. We plan to rewrite xdr_reserve_space to handle encoding across page boundaries using a scratch buffer, and don't want to risk writing to a pointer that was contained in a scratch buffer. Also it will no longer be safe to calculate lengths by subtracting two pointers, so use xdr_buf offsets instead. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Now that lengths are reliable, we can use xdr_truncate instead of open-coding it everywhere. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
This will be used in the server side in a few cases: - when certain operations (read, readdir, readlink) fail after encoding a partial response. - when we run out of space after encoding a partial response. - in readlink, where we initially reserve PAGE_SIZE bytes for data, then truncate to the actual size. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 29 5月, 2014 5 次提交
-
-
由 J. Bruce Fields 提交于
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
xdr_reserve_space should now be calculating the length correctly as we go, so there's no longer any need to fix it up here. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
It's just uninteresting debugging code at this point. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Note this makes ADJUST_ARGS useless; we'll remove it in the following patch. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
This is a cosmetic change for now; no change in behavior. Note we're just depending on xdr_reserve_space to do the bounds checking for us, we're not really depending on its adjustment of iovec or xdr_buf lengths yet, as those are fixed up by as necessary after the fact by read-link operations and by nfs4svc_encode_compoundres. However we do have to update xdr->iov on read-like operations to prevent xdr_reserve_space from messing with the already-fixed-up length of the the head. When the attribute encoding fails partway through we have to undo the length adjustments made so far. We do it manually for now, but later patches will add an xdr_truncate_encode() helper to handle cases like this. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 27 5月, 2014 2 次提交
-
-
由 J. Bruce Fields 提交于
This post-encoding check should be taking into account the need to encode at least an out-of-space error to the following op (if any). Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
If nfsd4_check_resp_size() returns an error then we should really be truncating the reply here, otherwise we may leave extra garbage at the end of the rpc reply. Also add a warning to catch any cases where our reply-size estimates may be wrong in the case of a non-idempotent operation. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 23 5月, 2014 16 次提交
-
-
由 J. Bruce Fields 提交于
Currently if the nfs-level part of a reply would be too large, we'll return an error to the client. But if the nfs-level part fits and leaves no room for krb5p or krb5i stuff, then we just drop the request entirely. That's no good. Instead, reserve some slack space at the end of the buffer and make sure we fail outright if we'd come close. The slack space here is a massive overstimate of what's required, we should probably try for a tighter limit at some point. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Mechanical transformation with no change of behavior. Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Just change the nfsd4_encode_getattr api. Not changing any code or adding any new functionality yet. Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
This is a mechanical transformation with no change in behavior. Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Currently a non-idempotent op reply may be cached if it fails in the proc code but not if it fails at xdr decoding. I doubt there are any xdr-decoding-time errors that would make this a problem in practice, so this probably isn't a serious bug. The space estimates should also take into account space required for encoding of error returns. Again, not a practical problem, though it would become one after future patches which will tighten the space estimates. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
The write reply also includes count and stable_how. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
The client is actually asking for 2532 bytes. I suspect that's a mistake. But maybe we can allow some more. In theory lock needs more if it might return a maximum-length lockowner in the denied case. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
OP_MODIFIES_SOMETHING flags operations that we should be careful not to initiate without being sure we have the buffer space to encode a reply. None of these ops fall into that category. We could probably remove a few more, but this isn't a very important problem at least for ops whose reply size is easy to estimate. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 NeilBrown 提交于
PF_LESS_THROTTLE has a very specific use case: to avoid deadlocks and live-locks while writing to the page cache in a loop-back NFS mount situation. It therefore makes sense to *only* set PF_LESS_THROTTLE in this situation. We now know when a request came from the local-host so it could be a loop-back mount. We already know when we are handling write requests, and when we are doing anything else. So combine those two to allow nfsd to still be throttled (like any other process) in every situation except when it is known to be problematic. Signed-off-by: NNeilBrown <neilb@suse.de> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 NeilBrown 提交于
If an incoming NFS request is coming from the local host, then nfsd will need to perform some special handling. So detect that possibility and make the source visible in rq_local. Signed-off-by: NNeilBrown <neilb@suse.de> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Trond Myklebust 提交于
If the accept() call fails, we need to put the module reference. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Chuck Lever 提交于
An NFS/RDMA client's source port is meaningless for RDMA transports. The transport layer typically sets the source port value on the connection to a random ephemeral port. Currently, NFS server administrators must specify the "insecure" export option to enable clients to access exports via RDMA. But this means NFS clients can access such an export via IP using an ephemeral port, which may not be desirable. This patch eliminates the need to specify the "insecure" export option to allow NFS/RDMA clients access to an export. BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=250Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Christoph Hellwig 提交于
No need for a kmem_cache_destroy wrapper in nfsd, just do proper goto based unwinding. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Benoit Taine 提交于
Assignments should not happen inside an if conditional, but in the line before. This issue was reported by checkpatch. The semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i1; expression e1; statement S; @@ -if(!(i1 = e1)) S +i1 = e1; +if(!i1) +S // </smpl> It has been tested by compilation. Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
-
- 22 5月, 2014 2 次提交
-
-
由 J. Bruce Fields 提交于
We're not cleaning up everything we need to on error. In particular, we're not removing our lease. Among other problems this can cause the struct nfs4_file used as fl_owner to be referenced after it has been destroyed. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Kinglong Mee 提交于
We're clearing the SUID/SGID bits on write by hand in nfsd_vfs_write, even though the subsequent vfs_writev() call will end up doing this for us (through file system write methods eventually calling file_remove_suid(), e.g., from __generic_file_aio_write). So, remove the redundant nfsd code. The only change in behavior is when the write is by root, in which case we previously cleared SUID/SGID, but will now leave it alone. The new behavior is the behavior of every filesystem we've checked. It seems better to be consistent with local filesystem behavior. And the security advantage seems limited as root could always restore these bits by hand if it wanted. SUID/SGID is not cleared after writing data with (root, local ext4), File: ‘test’ Size: 0 Blocks: 0 IO Block: 4096 regular empty file Device: 803h/2051d Inode: 1200137 Links: 1 Access: (4777/-rwsrwxrwx) Uid: ( 0/ root) Gid: ( 0/ root) Context: unconfined_u:object_r:admin_home_t:s0 Access: 2014-04-18 21:36:31.016029014 +0800 Modify: 2014-04-18 21:36:31.016029014 +0800 Change: 2014-04-18 21:36:31.026030285 +0800 Birth: - File: ‘test’ Size: 5 Blocks: 8 IO Block: 4096 regular file Device: 803h/2051d Inode: 1200137 Links: 1 Access: (4777/-rwsrwxrwx) Uid: ( 0/ root) Gid: ( 0/ root) Context: unconfined_u:object_r:admin_home_t:s0 Access: 2014-04-18 21:36:31.016029014 +0800 Modify: 2014-04-18 21:36:31.040032065 +0800 Change: 2014-04-18 21:36:31.040032065 +0800 Birth: - With no_root_squash, (root, remote ext4), SUID/SGID are cleared, File: ‘test’ Size: 0 Blocks: 0 IO Block: 262144 regular empty file Device: 24h/36d Inode: 786439 Links: 1 Access: (4777/-rwsrwxrwx) Uid: ( 1000/ test) Gid: ( 1000/ test) Context: system_u:object_r:nfs_t:s0 Access: 2014-04-18 21:45:32.155805097 +0800 Modify: 2014-04-18 21:45:32.155805097 +0800 Change: 2014-04-18 21:45:32.168806749 +0800 Birth: - File: ‘test’ Size: 5 Blocks: 8 IO Block: 262144 regular file Device: 24h/36d Inode: 786439 Links: 1 Access: (0777/-rwxrwxrwx) Uid: ( 1000/ test) Gid: ( 1000/ test) Context: system_u:object_r:nfs_t:s0 Access: 2014-04-18 21:45:32.155805097 +0800 Modify: 2014-04-18 21:45:32.184808783 +0800 Change: 2014-04-18 21:45:32.184808783 +0800 Birth: - Signed-off-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 21 5月, 2014 2 次提交
-
-
由 J. Bruce Fields 提交于
The current code assumes a one-to-one lockowner<->lock stateid correspondance. Cc: stable@vger.kernel.org Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
The nfsv4 state code has always assumed a one-to-one correspondance between lock stateid's and lockowners even if it appears not to in some places. We may actually change that, but for now when FREE_STATEID releases a lock stateid it also needs to release the parent lockowner. Symptoms were a subsequent LOCK crashing in find_lockowner_str when it calls same_lockowner_ino on a lockowner that unexpectedly has an empty so_stateids list. Cc: stable@vger.kernel.org Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 16 5月, 2014 1 次提交
-
-
由 J. Bruce Fields 提交于
As of 06f9cc12 "nfsd4: don't create unnecessary mask acl", any non-trivial ACL will be left with an unitialized entry, and a trivial ACL may write one entry beyond what's allocated. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 09 5月, 2014 4 次提交
-
-
由 Kinglong Mee 提交于
Signed-off-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Kinglong Mee 提交于
Signed-off-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Kinglong Mee 提交于
Signed-off-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
-