- 03 1月, 2011 3 次提交
-
-
由 Sam Ravnborg 提交于
Remove the following unused funtions: prom_stopcpu() prom_idlecpu() prom_restartcpu() Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
None of the functions was used. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
None of the functions was used. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 12月, 2010 3 次提交
-
-
由 David S. Miller 提交于
sparc64 systems have a restriction in that passing in buffer addressses above 4GB to prom calls is not reliable. We end up violating this when we do prom console writes, because we use an on-stack buffer to translate '\n' into '\r\n'. So instead, do this translation into an intermediate buffer, which is in the kernel image and thus below 4GB, then pass that to the PROM console write calls. On the 32-bit side we don't have to deal with any of these issues, so the new prom_console_write_buf() uses the existing prom_nbputchar() implementation. However we can now mark those routines static. Since the 64-bit side completely uses new code we can delete the putchar bits as they are now completely unused. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Completely unused. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This gets us closer to being able to eliminate the use of dynamic and stack based buffers, so that we can adhere to the "no buffer addresses above 4GB" rule for PROM calls. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 11月, 2010 1 次提交
-
-
由 David S. Miller 提交于
Never used outside of console_{32,64}.c Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2010 2 次提交
-
-
由 David S. Miller 提交于
Completely unused. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Unused. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 10月, 2010 1 次提交
-
-
由 Andres Salomon 提交于
Rather than passing around ints everywhere, use the phandle type where appropriate for the various functions that talk to the PROM. Signed-off-by: NAndres Salomon <dilinger@queued.net> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 09 1月, 2009 1 次提交
-
-
由 Julian Calaby 提交于
__prom_getchild() and __prom_getsibling() are not used anywhere, so don't export them. Signed-off-by: NJulian Calaby <julian.calaby@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 12月, 2008 1 次提交
-
-
由 Robert Reif 提交于
Use sparc64 version of prom/printf.c. The only differences for sparc32 is that prom_printf is no longer exported for modules which should be OK. Signed-off-by: NRobert Reif <reif@earthlink.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 12月, 2008 1 次提交
-
-
由 David S. Miller 提交于
This brings things in line with sparc64. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 9月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
While doing some easy cleanups on the sparc code I noticed that the CONFIG_SUN4 code seems to be worse than the rest - there were some "I don't know how it should work, but the current code definitely cannot work." places. And while I have seen people running Linux on machines like a SPARCstation 5 a few years ago I don't recall having seen sun4 machines, even less ones running Linux. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 7月, 2008 1 次提交
-
-
由 Sam Ravnborg 提交于
The majority of this patch was created by the following script: *** ASM=arch/sparc/include/asm mkdir -p $ASM git mv include/asm-sparc64/ftrace.h $ASM git rm include/asm-sparc64/* git mv include/asm-sparc/* $ASM sed -ie 's/asm-sparc64/asm/g' $ASM/* sed -ie 's/asm-sparc/asm/g' $ASM/* *** The rest was an update of the top-level Makefile to use sparc for header files when sparc64 is being build. And a small fixlet to pick up the correct unistd.h from sparc64 code. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 18 7月, 2008 2 次提交
-
-
由 Sam Ravnborg 提交于
With this commit all sparc64 header files are moved to asm-sparc. The remaining files (71 files) were too different to be trivially merged so divide them up in a _32.h and a _64.h file which are both included from the file with no bit size. The following script were used: cd include FILES=`wc -l asm-sparc64/*h | grep -v '^ 1' | cut -b 20-` for FILE in ${FILES}; do echo $FILE: BASE=`echo $FILE | cut -d '.' -f 1` FN32=${BASE}_32.h FN64=${BASE}_64.h GUARD=___ASM_SPARC_`echo $BASE | tr '-' '_' | tr [:lower:] [:upper:]`_H git mv asm-sparc/$FILE asm-sparc/$FN32 git mv asm-sparc64/$FILE asm-sparc/$FN64 echo git mv done printf "#ifndef %s\n" $GUARD > asm-sparc/$FILE printf "#define %s\n" $GUARD >> asm-sparc/$FILE printf "#if defined(__sparc__) && defined(__arch64__)\n" >> asm-sparc/$FILE printf "#include <asm-sparc/%s>\n" $FN64 >> asm-sparc/$FILE printf "#else\n" >> asm-sparc/$FILE printf "#include <asm-sparc/%s>\n" $FN32 >> asm-sparc/$FILE printf "#endif\n" >> asm-sparc/$FILE printf "#endif\n" >> asm-sparc/$FILE git add asm-sparc/$FILE echo new file done printf "#include <asm-sparc/%s>\n" $FILE > asm-sparc64/$FILE git add asm-sparc64/$FILE echo sparc64 file done done The guard contains three '_' to avoid conflict with existing guards. In additing the two Kbuild files are emptied to avoid breaking headers_* targets. We will reintroduce the exported header files when the necessary kbuild changes are merged. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
This seems to be left from the long gone AP1000 support. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 5月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
This patch removes the CVS keywords that weren't updated for a long time from comments. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 5月, 2008 3 次提交
-
-
由 David S. Miller 提交于
They are written, but never used. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The PROM library function prom_meminit() builds a table, prom_phys_avail[], just so that probe_memory() in arch/sparc/mm/fault.c can copy it into sp_banks[]. Just have prom_meminit() fill in the sp_banks[] array directly, and remove duplicated sort() function. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The code in arch/sparc/prom/memory.c computes three tables, the list of total memory, the list of available memory (total minus what firmware is using), and the list of firmware taken memory. Only the available memory list is even used. Therefore, kill those unused tables and make prom_meminfo() return just the available memory list. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 7月, 2007 1 次提交
-
-
由 David S. Miller 提交于
The current scheme works on static interpretation of text names, which is wrong. The output-device setting, for example, must be resolved via an alias or similar to a full path name to the console device. Paths also contain an optional set of 'options', which starts with a colon at the end of the path. The option area is used to specify which of two serial ports ('a' or 'b') the path refers to when a device node drives multiple ports. 'a' is assumed if the option specification is missing. This was caught by the UltraSPARC-T1 simulator. The 'output-device' property was set to 'ttya' and we didn't pick upon the fact that this is an OBP alias set to '/virtual-devices/console'. Instead we saw it as the first serial console device, instead of the hypervisor console. The infrastructure is now there to take advantage of this to resolve the console correctly even in multi-head situations in fbcon too. Thanks to Greg Onufer for the bug report. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 7月, 2006 1 次提交
-
-
由 David S. Miller 提交于
The m68k port's sun3 asm/oplib.h had a stray reference too, so I killed that off as well. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 3月, 2006 1 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 1月, 2006 1 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-