This looks like a typo in 8f32d5e5. This change didn't intend to do
any functional changes.

The problem was caught by gVisor tests.

Fixes: 8f32d5e5 ("KVM: x86/mmu: allow kvm_faultin_pfn to return page fault handling code")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndrei Vagin <avagin@gmail.com>
Message-Id: <20211015163221.472508-1-avagin@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Initial KVM RISC-V support

Following features are supported by the initial KVM RISC-V support:
1. No RISC-V specific KVM IOCTL
2. Loadable KVM RISC-V module
3. Minimal possible KVM world-switch which touches only GPRs and few CSRs
4. Works on both RV64 and RV32 host
5. Full Guest/VM switch via vcpu_get/vcpu_put infrastructure
6. KVM ONE_REG interface for VCPU register access from KVM user-space
7. Interrupt controller emulation in KVM user-space
8. Timer and IPI emuation in kernel
9. Both Sv39x4 and Sv48x4 supported for RV64 host
10. MMU notifiers supported
11. Generic dirty log supported
12. FP lazy save/restore supported
13. SBI v0.1 emulation for Guest/VM
14. Forward unhandled SBI calls to KVM user-space
15. Hugepage support for Guest/VM
16. IOEVENTFD support for Vhost

Add myself as maintainer for KVM RISC-V and Atish as designated reviewer.
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

Document RISC-V specific parts of the KVM API, such as:
 - The interrupt numbers passed to the KVM_INTERRUPT ioctl.
 - The states supported by the KVM_{GET,SET}_MP_STATE ioctls.
 - The registers supported by the KVM_{GET,SET}_ONE_REG interface
   and the encoding of those register ids.
 - The exit reason KVM_EXIT_RISCV_SBI for SBI calls forwarded to
   userspace tool.

CC: Jonathan Corbet <corbet@lwn.net>
CC: linux-doc@vger.kernel.org
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

The KVM host kernel is running in HS-mode needs so we need to handle
the SBI calls coming from guest kernel running in VS-mode.

This patch adds SBI v0.1 support in KVM RISC-V. Almost all SBI v0.1
calls are implemented in KVM kernel module except GETCHAR and PUTCHART
calls which are forwarded to user space because these calls cannot be
implemented in kernel space. In future, when we implement SBI v0.2 for
Guest, we will forward SBI v0.2 experimental and vendor extension calls
to user space.
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

Add a KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctl interface for floating
point registers such as F0-F31 and FCSR. This support is added for
both 'F' and 'D' extensions.
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch adds floating point (F and D extension) context save/restore
for guest VCPUs. The FP context is saved and restored lazily only when
kernel enter/exits the in-kernel run loop and not during the KVM world
switch. This way FP save/restore has minimal impact on KVM performance.
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

The RISC-V hypervisor specification doesn't have any virtual timer
feature.

Due to this, the guest VCPU timer will be programmed via SBI calls.
The host will use a separate hrtimer event for each guest VCPU to
provide timer functionality. We inject a virtual timer interrupt to
the guest VCPU whenever the guest VCPU hrtimer event expires.

This patch adds guest VCPU timer implementation along with ONE_REG
interface to access VCPU timer state from user space.
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch implements MMU notifiers for KVM RISC-V so that Guest
physical address space is in-sync with Host physical address space.

This will allow swapping, page migration, etc to work transparently
with KVM RISC-V.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch implements all required functions for programming
the stage2 page table for each Guest/VM.

At high-level, the flow of stage2 related functions is similar
from KVM ARM/ARM64 implementation but the stage2 page table
format is quite different for KVM RISC-V.

[jiangyifei: stage2 dirty log support]
Signed-off-by: NYifei Jiang <jiangyifei@huawei.com>
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

We implement a simple VMID allocator for Guests/VMs which:
1. Detects number of VMID bits at boot-time
2. Uses atomic number to track VMID version and increments
   VMID version whenever we run-out of VMIDs
3. Flushes Guest TLBs on all host CPUs whenever we run-out
   of VMIDs
4. Force updates HW Stage2 VMID for each Guest VCPU whenever
   VMID changes using VCPU request KVM_REQ_UPDATE_HGATP
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

We get illegal instruction trap whenever Guest/VM executes WFI
instruction.

This patch handles WFI trap by blocking the trapped VCPU using
kvm_vcpu_block() API. The blocked VCPU will be automatically
resumed whenever a VCPU interrupt is injected from user-space
or from in-kernel IRQCHIP emulation.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

We will get stage2 page faults whenever Guest/VM access SW emulated
MMIO device or unmapped Guest RAM.

This patch implements MMIO read/write emulation by extracting MMIO
details from the trapped load/store instruction and forwarding the
MMIO read/write to user-space. The actual MMIO emulation will happen
in user-space and KVM kernel module will only take care of register
updates before resuming the trapped VCPU.

The handling for stage2 page faults for unmapped Guest RAM will be
implemeted by a separate patch later.

[jiangyifei: ioeventfd and in-kernel mmio device support]
Signed-off-by: NYifei Jiang <jiangyifei@huawei.com>
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch implements the VCPU world-switch for KVM RISC-V.

The KVM RISC-V world-switch (i.e. __kvm_riscv_switch_to()) mostly
switches general purpose registers, SSTATUS, STVEC, SSCRATCH and
HSTATUS CSRs. Other CSRs are switched via vcpu_load() and vcpu_put()
interface in kvm_arch_vcpu_load() and kvm_arch_vcpu_put() functions
respectively.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

For KVM RISC-V, we use KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls to access
VCPU config and registers from user-space.

We have three types of VCPU registers:
1. CONFIG - these are VCPU config and capabilities
2. CORE   - these are VCPU general purpose registers
3. CSR    - these are VCPU control and status registers

The CONFIG register available to user-space is ISA. The ISA register is
a read and write register where user-space can only write the desired
VCPU ISA capabilities before running the VCPU.

The CORE registers available to user-space are PC, RA, SP, GP, TP, A0-A7,
T0-T6, S0-S11 and MODE. Most of these are RISC-V general registers except
PC and MODE. The PC register represents program counter whereas the MODE
register represent VCPU privilege mode (i.e. S/U-mode).

The CSRs available to user-space are SSTATUS, SIE, STVEC, SSCRATCH, SEPC,
SCAUSE, STVAL, SIP, and SATP. All of these are read/write registers.

In future, more VCPU register types will be added (such as FP) for the
KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch implements VCPU interrupts and requests which are both
asynchronous events.

The VCPU interrupts can be set/unset using KVM_INTERRUPT ioctl from
user-space. In future, the in-kernel IRQCHIP emulation will use
kvm_riscv_vcpu_set_interrupt() and kvm_riscv_vcpu_unset_interrupt()
functions to set/unset VCPU interrupts.

Important VCPU requests implemented by this patch are:
KVM_REQ_SLEEP       - set whenever VCPU itself goes to sleep state
KVM_REQ_VCPU_RESET  - set whenever VCPU reset is requested

The WFI trap-n-emulate (added later) will use KVM_REQ_SLEEP request
and kvm_riscv_vcpu_has_interrupt() function.

The KVM_REQ_VCPU_RESET request will be used by SBI emulation (added
later) to power-up a VCPU in power-off state. The user-space can use
the GET_MPSTATE/SET_MPSTATE ioctls to get/set power state of a VCPU.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch implements VCPU create, init and destroy functions
required by generic KVM module. We don't have much dynamic
resources in struct kvm_vcpu_arch so these functions are quite
simple for KVM RISC-V.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch adds initial skeletal KVM RISC-V support which has:
1. A simple implementation of arch specific VM functions
   except kvm_vm_ioctl_get_dirty_log() which will implemeted
   in-future as part of stage2 page loging.
2. Stubs of required arch specific VCPU functions except
   kvm_arch_vcpu_ioctl_run() which is semi-complete and
   extended by subsequent patches.
3. Stubs for required arch specific stage2 MMU functions.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch adds asm/kvm_csr.h for RISC-V hypervisor extension
related defines.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Message-Id: <20210927114016.1089328-2-anup.patel@wdc.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-master-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master

KVM: s390: allow to compile without warning with W=1

Avoid allocating the gfn_track arrays if nothing needs them. If there
are no external to KVM users of the API (i.e. no GVT-g), then page
tracking is only needed for shadow page tables. This means that when tdp
is enabled and there are no external users, then the gfn_track arrays
can be lazily allocated when the shadow MMU is actually used. This avoid
allocations equal to .05% of guest memory when nested virtualization is
not used, if the kernel is compiled without GVT-g.
Signed-off-by: NDavid Stevens <stevensd@chromium.org>
Message-Id: <20210922045859.2011227-3-stevensd@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a config option that allows kvm to determine whether or not there
are any external users of page tracking.
Signed-off-by: NDavid Stevens <stevensd@chromium.org>
Message-Id: <20210922045859.2011227-2-stevensd@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

According to section "TLB Flush" in APM vol 2,

    "Support for TLB_CONTROL commands other than the first two, is
     optional and is indicated by CPUID Fn8000_000A_EDX[FlushByAsid].

     All encodings of TLB_CONTROL not defined in the APM are reserved."
Signed-off-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <20210920235134.101970-3-krish.sadhukhan@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

By switching from kfree() to kvfree() in kvm_arch_free_vm() Arm64 can
use the common variant. This can be accomplished by adding another
macro __KVM_HAVE_ARCH_VM_FREE, which will be used only by x86 for now.

Further simplification can be achieved by adding __kvm_arch_free_vm()
doing the common part.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Message-Id: <20210903130808.30142-5-jgross@suse.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Predictive Store Forwarding: AMD Zen3 processors feature a new
technology called Predictive Store Forwarding (PSF).

PSF is a hardware-based micro-architectural optimization designed
to improve the performance of code execution by predicting address
dependencies between loads and stores.

How PSF works:

It is very common for a CPU to execute a load instruction to an address
that was recently written by a store. Modern CPUs implement a technique
known as Store-To-Load-Forwarding (STLF) to improve performance in such
cases. With STLF, data from the store is forwarded directly to the load
without having to wait for it to be written to memory. In a typical CPU,
STLF occurs after the address of both the load and store are calculated
and determined to match.

PSF expands on this by speculating on the relationship between loads and
stores without waiting for the address calculation to complete. With PSF,
the CPU learns over time the relationship between loads and stores. If
STLF typically occurs between a particular store and load, the CPU will
remember this.

In typical code, PSF provides a performance benefit by speculating on
the load result and allowing later instructions to begin execution
sooner than they otherwise would be able to.

The details of security analysis of AMD predictive store forwarding is
documented here.
https://www.amd.com/system/files/documents/security-analysis-predictive-store-forwarding.pdf

Predictive Store Forwarding controls:
There are two hardware control bits which influence the PSF feature:
- MSR 48h bit 2 – Speculative Store Bypass (SSBD)
- MSR 48h bit 7 – Predictive Store Forwarding Disable (PSFD)

The PSF feature is disabled if either of these bits are set.  These bits
are controllable on a per-thread basis in an SMT system. By default, both
SSBD and PSFD are 0 meaning that the speculation features are enabled.

While the SSBD bit disables PSF and speculative store bypass, PSFD only
disables PSF.

PSFD may be desirable for software which is concerned with the
speculative behavior of PSF but desires a smaller performance impact than
setting SSBD.

Support for PSFD is indicated in CPUID Fn8000_0008 EBX[28].
All processors that support PSF will also support PSFD.

Linux kernel does not have the interface to enable/disable PSFD yet. Plan
here is to expose the PSFD technology to KVM so that the guest kernel can
make use of it if they wish to.
Signed-off-by: NBabu Moger <Babu.Moger@amd.com>
Message-Id: <163244601049.30292.5855870305350227855.stgit@bmoger-ubuntu>
[Keep feature private to KVM, as requested by Borislav Petkov. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

mmu_try_to_unsync_pages checks if page tracking is active for the given
gfn, which requires knowing the memslot. We can pass down the memslot
via make_spte to avoid this lookup.

The memslot is also handy for make_spte's marking of the gfn as dirty:
we can test whether dirty page tracking is enabled, and if so ensure that
pages are mapped as writable with 4K granularity.  Apart from the warning,
no functional change is intended.
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Message-Id: <20210813203504.2742757-7-dmatlack@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Avoid the memslot lookup in rmap_add, by passing it down from the fault
handling code to mmu_set_spte and then to rmap_add.

No functional change intended.
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Message-Id: <20210813203504.2742757-6-dmatlack@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

mmu_set_spte is called for either PTE prefetching or page faults.  The
three boolean arguments write_fault, speculative and host_writable are
always respectively false/true/true for prefetching and coming from
a struct kvm_page_fault for page faults.

Let mmu_set_spte distinguish these two situation by accepting a
possibly NULL struct kvm_page_fault argument.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The level and A/D bit support of the new SPTE can be found in the role,
which is stored in the kvm_mmu_page struct.  This merges two arguments
into one.

For the TDP MMU, the kvm_mmu_page was not used (kvm_tdp_mmu_map does
not use it if the SPTE is already present) so we fetch it just before
calling make_spte.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Prepare for removing the ad_disabled argument of make_spte; instead it can
be found in the role of a struct kvm_mmu_page.  First of all, the TDP MMU
must set the role accurately.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The level of the new SPTE can be found in the kvm_mmu_page struct; there
is no need to pass it down.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that make_spte is called directly by the shadow MMU (rather than
wrapped by set_spte), it only has to return one boolean value.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since the two callers of set_spte do different things with the results,
inlining it actually makes the code simpler to reason about.  For example,
FNAME(sync_page) already has a struct kvm_mmu_page *, but set_spte had to
fish it back out of sptep's private page data.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since the two callers of set_spte do different things with the results,
inlining it actually makes the code simpler to reason about.  For example,
mmu_set_spte looks quite like tdp_mmu_map_handle_target_level, but the
similarity is hidden by set_spte.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that kvm_page_fault has a pointer to the memslot it can be passed
down to the page tracking code to avoid a redundant slot lookup.

No functional change intended.
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Message-Id: <20210813203504.2742757-5-dmatlack@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The memslot for the faulting gfn is used throughout the page fault
handling code, so capture it in kvm_page_fault as soon as we know the
gfn and use it in the page fault handling code that has direct access
to the kvm_page_fault struct.  Replace various tests using is_noslot_pfn
with more direct tests on fault->slot being NULL.

This, in combination with the subsequent patch, improves "Populate
memory time" in dirty_log_perf_test by 5% when using the legacy MMU.
There is no discerable improvement to the performance of the TDP MMU.

No functional change intended.
Suggested-by: NBen Gardon <bgardon@google.com>
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Message-Id: <20210813203504.2742757-4-dmatlack@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

tdp_mmu_map_set_spte_atomic is not taking care of dirty logging anymore,
the only difference that remains is that it takes a vCPU instead of
the struct kvm.  Merge the two functions.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This simplifies set_spte, which we want to remove, and unifies code
between the shadow MMU and the TDP MMU.  The warning will be added
back later to make_spte as well.

There is a small disadvantage in the TDP MMU; it may unnecessarily mark
a page as dirty twice if two vCPUs end up mapping the same page twice.
However, this is a very small cost for a case that is already rare.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Consolidate rmap_recycle and rmap_add into a single function since they
are only ever called together (and only from one place). This has a nice
side effect of eliminating an extra kvm_vcpu_gfn_to_memslot(). In
addition it makes mmu_set_spte(), which is a very long function, a
little shorter.

No functional change intended.
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Message-Id: <20210813203504.2742757-3-dmatlack@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

WARN and bail if the shadow walk for faulting in a SPTE terminates early,
i.e. doesn't reach the expected level because the walk encountered a
terminal SPTE.  The shadow walks for page faults are subtle in that they
install non-leaf SPTEs (zapping leaf SPTEs if necessary!) in the loop
body, and consume the newly created non-leaf SPTE in the loop control,
e.g. __shadow_walk_next().  In other words, the walks guarantee that the
walk will stop if and only if the target level is reached by installing
non-leaf SPTEs to guarantee the walk remains valid.

Opportunistically use fault->goal-level instead of it.level in
FNAME(fetch) to further clarify that KVM always installs the leaf SPTE at
the target level.
Reviewed-by: NLai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NLai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20210906122547.263316-1-jiangshanlai@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>