Adding a drive to a linear array seems to have stopped working, due to changes
elsewhere in md, and insufficient ongoing testing...

So the patch to make linear hot-add work in the first place introduced a
subtle bug elsewhere that interracts poorly with older version of mdadm.

This fixes it all up.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is possible that real data or metadata follows the bitmap without full page
alignment.

So limit the last write to be only the required number of bytes, rounded up to
the hard sector size of the device.
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a raid0 has a component device larger than 4TB, and is accessed on a 32bit
machines, then as 'chunk' is unsigned long,

   chunk << chunksize_bits

can overflow (this can be as high as the size of the device in KB).  chunk
itself will not overflow (without triggering a BUG).

So change 'chunk' to be 'sector_t, and get rid of the 'BUG' as it becomes
impossible to hit.

Cc: "Jeff Zheng" <Jeff.Zheng@endace.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's not sufficiently documented that CONFIG_HOTPLUG_CPU is required for
suspend/hibernation on SMP.

Point out the non-obvious.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no reason i2o_max_drivers must be a power of two.  This patch
eliminates such a constraint.

Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Maximum number of I2O drivers which could be registered is configurable by
max_drivers module parameter.

But the module parameter is ignored and default value (I2O_MAX_DRIVERS = 8)
is used in the loops to notify all registered drivers.

Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

i2o_driver_register() initalizes event queue for driver only when
drv->event is set.  So similarly the event queue should be destroyed only
when drv->event is set in the error path.  Otherwise destroy_workqueue()
will called with NULL.

Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Gathering signals in bulk enables server applications to drain a signal
queue (almost full of realtime signals) more efficiently by reducing the
syscall and file look-up overhead.

Very similar to the sigtimedwait4() call described by Niels Provos, Chuck
Lever, and Stephen Tweedie in a paper entitled "Analyzing the Overload
Behavior of a Simple Web Server".  The paper lists more details and
advantages.
Signed-off-by: NDavi E. M. Arnaut <davi@haxent.com.br>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update dontdiff file by adding entries from many .gitignore files.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix sizeof(PAGE_SIZE) typo.  It should be just PAGE_SIZE for zeroing the
swsusp_header.
Signed-off-by: NOGAWA Hirofumi <hogawa@miraclelinux.com>
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

phantom, take care of pci posting

thanks to akpm for pointing this out
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

phantom's ioctl is often (4000 times a sec or so) invoked, don't acquire
BKL and block other processes.
Signed-off-by: NJiri Slaby <xslaby@phantom.fi.muni.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cleanup_workqueue_thread() and cwq_should_stop() are overcomplicated.

Convert the code to use kthread_should_stop/kthread_stop as was
suggested by Gautham and Srivatsa.

In particular this patch removes the (unlikely) busy-wait loop from the
exit path, it was a temporary and ugly kludge (if not a bug).

Note: the current code was designed to solve another old problem:
work->func can't share locks with hotplug callbacks.  I think this could
be done, see

	http://marc.info/?l=linux-kernel&m=116905366428633

but this needs some more complications to preserve CPU affinity of
cwq->thread during cpu_up().  A freezer-based hotplug looks more
appealing.

[akpm@linux-foundation.org: make it more tolerant of gcc borkenness]
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Zilvinas Valinskas <zilvinas@wilibox.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

An omitted unlock.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The check for super sized slabs where we can no longer move the free
pointer behind the object for debugging purposes etc is accessing a
field that is not setup yet.  We must use objsize here since the size of
the slab has not been determined yet.

The effect of this is that a global slab shrink via "slabinfo -s" will
show errors about offsets being wrong if booted with slub_debug.
Potentially there are other troubles with huge slabs under slub_debug
because the calculated free pointer offset is truncated.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c:931: warning: 'setup_nr_node_ids' defined but not used

This is now the only (!) compiler warning I get in my UML build :)
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When inode is dropped (no more references) delete it from cache.

There's not much point in keeping it cached, when a new lookup will refresh
the attributes anyway.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes O_APPEND in direct IO mode.  Also checks writes against file size
limits, notably rlimits.

Reported by Greg Bruno.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't allow loading ELF shared library from noexec points so the
same should apply to sys_uselib aswell.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In stree.c, MIN_KEY is declared const. The extern declaration in dir.c
doesn't match...
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

info->pseudo_palette was previously kmalloced.  Do not overwrite it afterwards
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Here are some small fixes for the imxfb framebuffer driver:

 - remove ifndef for MX1FS2 platform which is not present in the kernel.
 - REV, CLS, PS and SPL_SPR are only needed with some sharp displays.
   Only setup the corresponding io pins when such a display is connected.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ps3fb: Use the FB_SYS_* operations instead of the FB_CFB_* operations as the
actual frame buffer memory is part of system RAM
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix compile warnings from w100fb.c.  Attribute registration failure doesn't
stop the driver working so just warn about it.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

 - fix 16-bit RGBA 4444 and 5551 modes (use fbset -rgba to set them)
 - kill wmb() after each register write by PM3_SLOW_WRITE_REG
 - kill inaccurate comments (leftovers from skeletonfb.c)
 - kill PCI class restriction, now it is more general and shorter
 - white spaces and other minor fixes and source reducing
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes a possible barriers problem in RDAC_WR functions, then
remove redudant ones.

It also removes one unneeded register load from blitter function().
Signed-off-by: NKrzysztof.Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch puts all SBUS/UPA selection under one option "SBUS/UPA
framebuffers" and moves all sparc specific drivers next to them in one group.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

'ioc' should be deallocated if __copy_from_user fails (found by Coverity
- CID 1644).
Signed-off-by: NFlorin Malita <fmalita@gmail.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Optimize select by a using stack space for small fd sets.
core_sys_select() already has this optimization.  This is for compat
version.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Steve Hawkes discovered a problem where recalc_sigpending_tsk was called in
do_sigaction but no signal_wake_up call was made, preventing later signals
from waking up blocked threads with TIF_SIGPENDING already set.

In fact, the few other calls to recalc_sigpending_tsk outside the signals
code are also subject to this problem in other race conditions.

This change makes recalc_sigpending_tsk private to the signals code.  It
changes the outside calls, as well as do_sigaction, to use the new
recalc_sigpending_and_wake instead.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Cc: <Steve.Hawkes@motorola.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kmalloc for flush_words resulted in zero size allocation when no
k8_northbridges existed.  Short circuit the code path for this case.

Also remove uneeded zeroing of num_k8_northbridges just after checking if
it is zero.
Signed-off-by: NBen Collins <bcollins@ubuntu.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the obvious errors in the explanation of Kconfig files.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There have been a number of instances where people have accidentally compiled
rcutorture into the kernel (CONFIG_RCU_TORTURE_TEST=y), which has never been
useful, and has often resulted in great frustration.

The attached patch prohibits rcutorture from being compiled into the
kernel.  It may be excluded altogether or compiled as a module.  People
wishing to have rcutorture hammer their machine immediately upon boot
are free to hand-edit lib/Kconfig.debug to remove the "depends on m"
line.

Thanks to Randy Dunlap for the trick that makes this work.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NJosh Triplett <josh@kernel.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make the PTRACE_SYSEMU checking more robust.  It will make sure that system
call numbers are reported correctly.  If there is a problem, it will disable
PTRACE_SYSEMU use and use PTRACE_SYSCALL instead.

Thanks to Balaji G for helping reproduce this problem.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Message size needs to be checked before copying, or bad things could
happen.
Signed-off-by: NDomen Puncer <domen.puncer@telargo.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

include/linux/capability.h:397: warning: "struct task_struct" declared inside parameter list
include/linux/capability.h:397: warning: its scope is only this definition or declaration, which is probably not what you want
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Send an uevent to user space to indicate that a media change event has
occurred.
Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow user space to determine if a disk supports Asynchronous Notification of
media changes.  This is done by adding a new sysfs file "capability_flags",
which is documented in (insert file name).  This sysfs file will export all
disk capabilities flags to user space.  We also define a new flag to define
the media change notification capability.
Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The warning in the NOHZ code, which triggers when a CPU goes idle with
softirqs pending can fill up the logs quite quickly.  Rate limit the output
until we found the root cause of that problem.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the SPI documentation to cover a few points that have proven to be
confusing or unclear; most notably the two clock mode bits.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>