- 11 9月, 2005 5 次提交
-
-
由 Paul Fulghum 提交于
Add ability to clear statistics. Signed-off-by: NPaul Fulghum <paulkf@microgate.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Jackson 提交于
The cpusets-formalize-intermediate-gfp_kernel-containment patch has a deadlock problem. This patch was part of a set of four patches to make more extensive use of the cpuset 'mem_exclusive' attribute to manage kernel GFP_KERNEL memory allocations and to constrain the out-of-memory (oom) killer. A task that is changing cpusets in particular ways on a system when it is very short of free memory could double trip over the global cpuset_sem semaphore (get the lock and then deadlock trying to get it again). The second attempt to get cpuset_sem would be in the routine cpuset_zone_allowed(). This was discovered by code inspection. I can not reproduce the problem except with an artifically hacked kernel and a specialized stress test. In real life you cannot hit this unless you are manipulating cpusets, and are very unlikely to hit it unless you are rapidly modifying cpusets on a memory tight system. Even then it would be a rare occurence. If you did hit it, the task double tripping over cpuset_sem would deadlock in the kernel, and any other task also trying to manipulate cpusets would deadlock there too, on cpuset_sem. Your batch manager would be wedged solid (if it was cpuset savvy), but classic Unix shells and utilities would work well enough to reboot the system. The unusual condition that led to this bug is that unlike most semaphores, cpuset_sem _can_ be acquired while in the page allocation code, when __alloc_pages() calls cpuset_zone_allowed. So it easy to mistakenly perform the following sequence: 1) task makes system call to alter a cpuset 2) take cpuset_sem 3) try to allocate memory 4) memory allocator, via cpuset_zone_allowed, trys to take cpuset_sem 5) deadlock The reason that this is not a serious bug for most users is that almost all calls to allocate memory don't require taking cpuset_sem. Only some code paths off the beaten track require taking cpuset_sem -- which is good. Taking a global semaphore on the main code path for allocating memory would not scale well. This patch fixes this deadlock by wrapping the up() and down() calls on cpuset_sem in kernel/cpuset.c with code that tracks the nesting depth of the current task on that semaphore, and only does the real down() if the task doesn't hold the lock already, and only does the real up() if the nesting depth (number of unmatched downs) is exactly one. The previous required use of refresh_mems(), anytime that the cpuset_sem semaphore was acquired and the code executed while holding that semaphore might try to allocate memory, is no longer required. Two refresh_mems() calls were removed thanks to this. This is a good change, as failing to get all the necessary refresh_mems() calls placed was a primary source of bugs in this cpuset code. The only remaining call to refresh_mems() is made while doing a memory allocation, if certain task memory placement data needs to be updated from its cpuset, due to the cpuset having been changed behind the tasks back. Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
This patch (written by me and also containing many suggestions of Arjan van de Ven) does a major cleanup of the spinlock code. It does the following things: - consolidates and enhances the spinlock/rwlock debugging code - simplifies the asm/spinlock.h files - encapsulates the raw spinlock type and moves generic spinlock features (such as ->break_lock) into the generic code. - cleans up the spinlock code hierarchy to get rid of the spaghetti. Most notably there's now only a single variant of the debugging code, located in lib/spinlock_debug.c. (previously we had one SMP debugging variant per architecture, plus a separate generic one for UP builds) Also, i've enhanced the rwlock debugging facility, it will now track write-owners. There is new spinlock-owner/CPU-tracking on SMP builds too. All locks have lockup detection now, which will work for both soft and hard spin/rwlock lockups. The arch-level include files now only contain the minimally necessary subset of the spinlock code - all the rest that can be generalized now lives in the generic headers: include/asm-i386/spinlock_types.h | 16 include/asm-x86_64/spinlock_types.h | 16 I have also split up the various spinlock variants into separate files, making it easier to see which does what. The new layout is: SMP | UP ----------------------------|----------------------------------- asm/spinlock_types_smp.h | linux/spinlock_types_up.h linux/spinlock_types.h | linux/spinlock_types.h asm/spinlock_smp.h | linux/spinlock_up.h linux/spinlock_api_smp.h | linux/spinlock_api_up.h linux/spinlock.h | linux/spinlock.h /* * here's the role of the various spinlock/rwlock related include files: * * on SMP builds: * * asm/spinlock_types.h: contains the raw_spinlock_t/raw_rwlock_t and the * initializers * * linux/spinlock_types.h: * defines the generic type and initializers * * asm/spinlock.h: contains the __raw_spin_*()/etc. lowlevel * implementations, mostly inline assembly code * * (also included on UP-debug builds:) * * linux/spinlock_api_smp.h: * contains the prototypes for the _spin_*() APIs. * * linux/spinlock.h: builds the final spin_*() APIs. * * on UP builds: * * linux/spinlock_type_up.h: * contains the generic, simplified UP spinlock type. * (which is an empty structure on non-debug builds) * * linux/spinlock_types.h: * defines the generic type and initializers * * linux/spinlock_up.h: * contains the __raw_spin_*()/etc. version of UP * builds. (which are NOPs on non-debug, non-preempt * builds) * * (included on UP-non-debug builds:) * * linux/spinlock_api_up.h: * builds the _spin_*() APIs. * * linux/spinlock.h: builds the final spin_*() APIs. */ All SMP and UP architectures are converted by this patch. arm, i386, ia64, ppc, ppc64, s390/s390x, x64 was build-tested via crosscompilers. m32r, mips, sh, sparc, have not been tested yet, but should be mostly fine. From: Grant Grundler <grundler@parisc-linux.org> Booted and lightly tested on a500-44 (64-bit, SMP kernel, dual CPU). Builds 32-bit SMP kernel (not booted or tested). I did not try to build non-SMP kernels. That should be trivial to fix up later if necessary. I converted bit ops atomic_hash lock to raw_spinlock_t. Doing so avoids some ugly nesting of linux/*.h and asm/*.h files. Those particular locks are well tested and contained entirely inside arch specific code. I do NOT expect any new issues to arise with them. If someone does ever need to use debug/metrics with them, then they will need to unravel this hairball between spinlocks, atomic ops, and bit ops that exist only because parisc has exactly one atomic instruction: LDCW (load and clear word). From: "Luck, Tony" <tony.luck@intel.com> ia64 fix Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NArjan van de Ven <arjanv@infradead.org> Signed-off-by: NGrant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: NHirokazu Takata <takata@linux-m32r.org> Signed-off-by: NMikael Pettersson <mikpe@csd.uu.se> Signed-off-by: NBenoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alan Cox 提交于
pcibus_to_cpumask expands into more than just an initialiser so gcc moans about code before variable declarations. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
*** Warning: "bit_spin_lock" [fs/ntfs/ntfs.ko] undefined! *** Warning: "bit_spin_unlock" [fs/ntfs/ntfs.ko] undefined! Cc: Anton Altaparmakov <aia21@cantab.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 9月, 2005 35 次提交
-
-
由 NeilBrown 提交于
This shouldn't be a BUG. We should cope. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
If you try to assemble an array with too many missing devices, raid10 will now reject the attempt, instead of allowing it. Also check when hot-adding a drive and refuse the hot-add if the array is beyond hope. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
There was another case where sb_size wasn't being set, so instead do the sensible thing and set if when filling in the content of a superblock. That ensures that whenever we write a superblock, the sb_size MUST be set. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
[PATCH] md: make sure the new 'sb_size' is set properly device added without pre-existing superblock. There are two ways to add devices to an md/raid array. It can have superblock written to it, and then given to the md driver, which will read the superblock (the new way) or md can be told (through SET_ARRAY_INFO) the shape of the array, and the told about individual drives, and md will create the required superblock (the old way). The newly introduced sb_size was only set for drives being added the new way, not the old ways. Oops :-( Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Just like failed drives have (F), so spare drives now have (S). Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Leave it unchanged if the original (0.90) is used, incase it might be a compatability problem. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Doh. I want the physical hard-sector-size, not the current block size... Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
On reflection, a better default location for hot-adding bitmaps with version-1 superblocks is immediately after the superblock. There might not be much room there, but there is usually atleast 3k, and that is a good start. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
The bitmap code used to have two daemons, so there is some 'common' start/stop code. But now there is only one, so the common code is just noise. This patch tidies this up somewhat. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
mddev->bitmap gets clearred before the writeback daemon is stopped. So the write_back daemon needs to be careful not to dereference the 'bitmap' if it is NULL. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Switch MD to use the kthread infrastructure, to simplify the code and get rid of tasklist_lock abuse in md_unregister_thread. Also don't flush signals in md_thread, as the called thread will always do that. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
This is a direct port of the raid5 patch. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Most awkward part of this is delaying write requests until bitmap updates have been flushed. To achieve this, we have a sequence number (seq_flush) which is incremented each time the raid5 is unplugged. If the raid thread notices that this has changed, it flushes bitmap changes, and assigned the value of seq_flush to seq_write. When a write request arrives, it is given the number from seq_write, and that write request may not complete until seq_flush is larger than the saved seq number. We have a new queue for storing stripes which are waiting for a bitmap flush and an extra flag for stripes to record if the write was 'degraded' and so should not clear the a bit in the bitmap. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
version-1 superblocks are not (normally) 4K long, and can be of variable size. Writing the full 4K can cause corruption (but only in non-default configurations). With this patch the super-block-flavour can choose a size to read, and set a size to write based on what it finds. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
These inlines haven't been used for ages, they should go. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
read_sb_page() assumed that if sync_page_io fails, the device would be marked faultly. However it isn't. So in the face of error, read_sb_page would loop forever. Redo the logic so that this cannot happen. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
As this is used to flag an internal bitmap. Also, introduce symbolic names for feature bits. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
It is possibly (and occasionally useful) to have a raid1 without persistent superblocks. The code in add_new_disk for adding a device to such an array always tries to read a superblock. This will obviously fail. So do the appropriate test and call md_import_device with appropriate args. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
When hot-adding a bitmap, bitmap_daemon_work could get called while the bitmap is being created, so don't set mddev->bitmap until the bitmap is ready. This requires freeing the bitmap inside bitmap_create if creation failed part-way through. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
The 'lastrun' time wasn't being initialised, so it could be half a jiffie-cycle before it seemed to be time to do work again. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
A state of 0 mean 'not quiesced' A state of 1 means 'is quiesced' The original code got this wrong. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
linear currently uses division by the size of the smallest componenet device to find which device a request goes to. If that smallest device is larger than 2 terabytes, then the division will not work on some systems. So we introduce a pre-shift, and take care not to make the hash table too large, much like the code in raid0. Also get rid of conf->nr_zones, which is not needed. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
If a device is flagged 'WriteMostly' and the array has a bitmap, and the bitmap superblock indicates that write_behind is allowed, then write_behind is enabled for WriteMostly devices. Write requests will be acknowledges as complete to the caller (via b_end_io) when all non-WriteMostly devices have completed the write, but will not be cleared from the bitmap until all devices complete. This requires memory allocation to make a local copy of the data being written. If there is insufficient memory, then we fall-back on normal write semantics. Signed-Off-By: NPaul Clements <paul.clements@steeleye.com> Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
This allows a device in a raid1 to be marked as "write mostly". Read requests will only be sent if there is no other option. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Both file-bitmaps and superblock bitmaps are supported. If you add a bitmap file on the array device, you lose. This introduces a 'default_bitmap_offset' field in mddev, as the ioctl used for adding a superblock bitmap doesn't have room for giving an offset. Later, this value will be setable via sysfs. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
When we find a 'stale' bitmap, possibly because it is new, we should just assume every bit needs to be set, but rather base the setting of bits on the current state of the array (degraded and recovery_cp). Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
... otherwise we loose a reference and can never free the file. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jun'ichi Nomura 提交于
Fix another bug in dm-raid1.c that the dirty region may stay in or be moved to clean list and freed while in use. It happens as follows: CPU0 CPU1 ------------------------------------------------------------------------------ rh_dec() if (atomic_dec_and_test(pending)) <the region is still marked dirty> rh_inc() if the region is clean mark the region dirty and remove from clean list mark the region clean and move to clean list atomic_inc(pending) At this stage, the region is in clean list and will be mistakenly reclaimed by rh_update_states() later. Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
md does not yet support BIO_RW_BARRIER, so be honest about it and fail (-EOPNOTSUPP) any such requests. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
'this_sector' is a virtual (array) address while 'head_position' is a physical (device) address, so substraction doesn't make any sense. devs[slot].addr should be used instead of this_sector. However, this patch doesn't make much practical different to the read balancing due to the effects of later code. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Don't just irritate all other kernel developers. Fix the users first, then you can re-introduce the must-check infrastructure to avoid new cases creeping in. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Fix up fs/compat.c fixes.
-
由 Daniel Ritz 提交于
This fixes the problem with "Averatec 6240 pcmcia_socket0: unable to apply power", which was due to the CardBus IOMEM register region being allocated at an address that was actually inside the RAM window that had been reserved for video frame-buffers in an UMA setup. The BIOS _should_ have marked that region reserved in the e820 memory descriptor tables, but did not. It is fixed by rounding up the default starting address of PCI memory allocations, so that we leave a bigger gap after the final known memory location. The amount of rounding depends on how big the unused memory gap is that we can allocate IOMEM from. Based on example code by Linus. Acked-by: NGreg KH <greg@kroah.com> Acked-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-