use net_device directly. Compile tested, objdiff shows no changes.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ipv6 gre implementation was cleaned up to share more code
with the ipv4 version, but it can be enabled even when NET_IPGRE_DEMUX
is disabled, resulting in a link error:

net/built-in.o: In function `gre_rcv':
:(.text+0x17f5d0): undefined reference to `gre_parse_header'
ERROR: "gre_parse_header" [net/ipv6/ip6_gre.ko] undefined!

This adds a Kconfig dependency to prevent that now invalid
configuration.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: 308edfdf ("gre6: Cleanup GREv6 receive path, call common GRE functions")
Acked-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Benc says:

====================
gre: receive also TEB packets for lwtunnels

NOTE: this patchset needs net merged to net-next.

This allows lwtunnel users to get also packets with ETH_P_TEB protocol
specified in GRE header through an ipgre interface. There's really nothing
special about these packets in the case of lwtunnels - it's just an inner
protocol like any other. The only complications stem from keeping
compatibility with other uses of GRE.

This will be used by openvswitch to support eth_push and eth_pop actions.
I'd also like to see tc support for lwtunnels (this feature included) in the
future.

The first patch is not directly related and can be submitted standalone if
needed.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For ipgre interfaces in collect metadata mode, receive also traffic with
encapsulated Ethernet headers. The lwtunnel users are supposed to sort this
out correctly. This allows to have mixed Ethernet + L3-only traffic on the
same lwtunnel interface. This is the same way as VXLAN-GPE behaves.

To keep backwards compatibility and prevent any surprises, gretap interfaces
have priority in receiving packets with Ethernet headers.
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This will allow to make the pull dependent on the tunnel type.
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The call to gre_parse_header is either followed by iptunnel_pull_header, or
in the case of ICMP error path, the actual header is not accessed at all.

In the first case, iptunnel_pull_header will call pskb_may_pull anyway and
it's pointless to do it twice. The only difference is what call will fail
with what error code but the net effect is still the same in all call sites.

In the second case, pskb_may_pull is pointless, as skb->data is at the outer
IP header and not at the GRE header.
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox 100G ethernet SRIOV Upgrades

This series introduces new features and upgrades for mlx5 etherenet SRIOV,
while the first patch provides a bug fixes for a compilation issue introduced
buy the previous aRFS series for when CONFIG_RFS_ACCEL=y and CONFIG_MLX5_CORE_EN=n.

Changes from V0:
    - 1st patch: Don't add a new Kconfig flag.  Instead, compile out en_arfs.c \
contents when CONFIG_RFS_ACCEL=n

SRIOV upgrades:
    - Use synchronize_irq instead of the vport events spin_lock
    - Fix memory leak in error flow
    - Added full VST support
    - Spoofcheck support
    - Trusted VF promiscuous and allmulti support

VST and Spoofcheck in details:
    - Adding Low level firmware commands support for creating ACLs
     (Access Control Lists) Flow tables.  ACLs are regular flow tables with
     the only exception that they are bound to a specific e-Switch vport (VF)
     and they can be one of two types
        > egress ACL: filters traffic going from e-Switch to VF.
        > ingress ACL: filters traffic going from VF to e-Switch.
    - Ingress/Egress ACLs (per vport) for VF VST mode filtering.
    - Ingress/Egress ACLs (per vport) for VF spoofcheck filtering.
    - Ingress/Egress ACLs (per vport) configuration:
        > Created only when at least one of (VST, spoofcheck) is configured.
	> if (!spoofchk && !vst) allow all traffic.  i.e. no ACLs.
        > if (spoofchk && vst) allow only untagged traffic with smac=original mac \
                sent from the VF.
        > if (spoofchk && !vst) allow only traffic with smac=original mac sent from \
the VF.  > if (!spoofchk && vst) allow only untagged traffic.

Trusted VF promiscuous and allmulti support in details:
    - Added two flow groups for allmulti and promisc VFs to the e-Switch FDB table
        > Allmulti group: One rule that forwards any mcast traffic coming from
                          either uplink or VFs/PF vports.
        > Promisc group: One rule that forwards all unmatched traffic coming from \
                uplink.
    - Add vport context change event handling for promisc and allmulti
      If VF is trusted respect the request and:
        > if allmulti request: add the vport to the allmulti group.
          and to all other L2 mcast address in the FDB table.
        > if promisc request: add the vport to the promisc group.
        > Note: A promisc VF can only see traffic that was not explicitly matched to
                or requested by any other VF.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Add support to configure trusted vf attribute through trust_vf_ndo.

- Upon VF trust setting change we update vport context to refresh
 allmulti/promisc or any trusted vf attributes that we didn't trust the
 VF for before.

- Lock the eswitch state lock on vport event in order to synchronise the
 vport context updates , this will prevent contention with vport trust
 setting change which will trigger vport mac list update.
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add promisc_change as a trigger to vport context change event.
Add set vport promisc/allmulti functions to add vport to promiscuous
flowtable rules.
Upon promisc/allmulti rx mode vf request add the vport to
the relevant promiscuous group (Allmulti/Promisc group) so the relevant
traffic will be forwarded to it.
Upon allmulti vf request add the vport to each existing multicast fdb
rule.
Upon adding/removing mcast address from a vport, update all other
allmulti vports.
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add promiscuous and allmulti steering groups in FDB table.
Besides the full match L2 steering rules group, we added
two more groups to catch the "miss" rules traffic:
* Allmulti group: One rule that forwards any mcast traffic coming from
either uplink or VFs/PF vports
* Promisc group: One rule that forwards all unmatched traffic coming
from uplink.

Needed for downstream privileged VF promisc and allmulti support.
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the usage of explicit cleanup function and use existing vport
change handler. Calling vport change handler while vport
is disabled will cleanup the vport resources.
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable ingress/egress ACL tables only when we need to configure ACL
rules.
Disable ingress/egress ACL tables once all ACL rules are removed.

All VF outgoing/incoming traffic need to go through the ingress/egress ACL
tables.
Adding/Removing these tables on demand will save unnecessary hops in the
flow steering when the ACL tables are empty.
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Configure ingress and egress vport ACL rules according to spoofchk
admin parameters.

Ingress ACL flow table rules:
if (!spoofchk && !vst) allow all traffic.
else :
1) one of the following rules :
* if (spoofchk && vst) allow only untagged traffic with smac=original
mac sent from the VF.
* if (spoofchk && !vst) allow only traffic with smac=original mac sent
from the VF.
* if (!spoofchk && vst) allow only untagged traffic.
2) drop all traffic that didn't hit #1.

Add support for set vf spoofchk ndo.

Add non zero mac validation in case of spoofchk to set mac ndo:
when setting new mac we need to validate that the new mac is
not zero while the spoofchk is on because it is illegal
combination.
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Configure ingress and egress vport ACL rules according to
vlan and qos admin parameters.

Ingress ACL flow table rules:
1) drop any tagged packet sent from the VF
2) allow other traffic (default behavior)

Egress ACL flow table rules:
1) allow only tagged traffic with vlan_tag=vst_vid.
2) drop other traffic.
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Create egress/ingress ACLs per VF vport at vport enable.

Ingress ACL:
	- one flow group to drop all tagged traffic in VST mode.

Egress ACL:
	- one flow group that allows only untagged traffic with
          smac that is equals to the original mac (anti-spoofing).
        - one flow group that allows only untagged traffic.
        - one flow group that allows only  smac that is equals
          to the original mac (anti-spoofing).
        (note: only one of the above group has active rule)
	- star rule will be used to drop all other traffic.

By default no rules are generated, unless VST is explicitly requested.
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix memory leak in case query nic vport command failed.

Fixes: 81848731 ('net/mlx5: E-Switch, Add SR-IOV (FDB) support')
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vport spin lock can be replaced with synchronize_irq() in the right
place, this will remove the need of locking inside irq context.
Locking in esw_enable_vport is not required since vport events are yet
to be enabled, and at esw_disable_vport it is sufficient to
synchronize_irq() to guarantee no further vport events handlers will be
scheduled.
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the relevant flow steering device structs and commands to
support vport.
Update the flow steering core API to receive vport number.
Add ingress and egress ACL flow table name spaces.
Add ACL flow table support:
* ACL (Access Control List) flow table is a table that contains
only allow/drop steering rules.

* We have two types of ACL flow tables - ingress and egress.

* ACLs handle traffic sent from/to E-Switch FDB table, Ingress refers to
traffic sent from Vport to E-Switch and Egress refers to traffic sent
from E-Switch to vport.

* Ingress ACL flow table allow/drop rules is checked against traffic
sent from VF.

* Egress ACL flow table allow/drop rules is checked against traffic sent
to VF.
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

en_arfs.o should be compiled only if both CONFIG_MLX5_CORE_EN
and CONFIG_RFS_ACCEL are enabled. en_arfs calls to rps_may_expire_flow
which is compiled only if CONFIG_RFS_ACCEL is defined.

Move en_arfs.o compilation dependency to be under CONFIG_MLX5_CORE_EN
and wrap the en_arfs.c content with ifdef of CONFIG_RFS_ACCEL.

Fixes: 1cabe6b0 ('net/mlx5e: Create aRFS flow tables')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reported-by: NAlexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
cxgb4: mbox enhancements for cxgb4

This patch series checks for firmware errors when we are waiting for
mbox response in a loop and breaks out. When negative timeout is passed
to mailbox code, don't sleep. Negative timeout is passed only from
interrupt context.

This patch series has been created against net-next tree and includes
patches on cxgb4 driver.

We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Check for firmware errors in the mailbox command loop and report
them differently rather than simply timing out when the firmware goes
belly up.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When link goes down, from the interrupt handler DCB priority for the
Tx queues needs to be unset. We issue mbox command to unset the Tx queue
priority with negative timeout. In t4_wr_mbox_meat_timeout() do not sleep
when negative timeout is passed, since it is called from interrupt context.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the phy initialization code for Qualcomm
Atheros AR8035 phy. This configuration is found in the
Cisco Meraki MR24.
Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexander Duyck says:

====================
Fix Tunnel features and enable GSO partial for several drivers

This patch series is meant to allow us to get the best performance possible
for Mellanox ConnectX-3/4 and Broadcom NetXtreme-C/E adapters in terms of
VXLAN and GRE tunnels.

The first 3 patches address issues I found in regards to GSO_PARTIAL and
TSO_MANGLEID.

The next 4 patches go through and enable GSO_PARTIAL for VXLAN tunnels that
have an outer checksum enabled, and then enable IPv6 support where I can.
One outstanding issue is that I wasn't able to get offloads working with
outer IPv6 headers on mlx4.  However that wasn't a feature that was enabled
before so it isn't technically a regression, however I believe Engineers
from Mellanox said they would look into it since they thought it should be
supported.

The last patch enables GSO_PARTIAL for VXLAN and GRE tunnels on the bnxt
driver.  One piece of feedback I received on the patch was that the
hardware has globally set IPv6 UDP tunnels to always have the checksum
field computed.  I plan to work with Broadcom to get that addressed so that
we only populate the checksum field if it was requested by the network
stack.

v2: Rebased patches off of latest changes to the mlx4/mlx5 drivers.
    Added bnxt driver patch as I received feedback on the RFC.
v3: Moved 2 patches into series for net as they were generic fixes.
    Added patch to disable GSO partial if frame is less than 2x size of MSS

    There are outstanding issues as called out above that need to be
    addressed, however they were present before these patches so it isn't
    as if they introduce a regression.  In addition gains can be easily
    seen so there should be no issue with applying the driver patches while
    the IPv6 mlx4_en and bnxt issues are being researched.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch assumes that the bnxt hardware will ignore existing IPv4/v6
header fields for length and checksum as well as the length and checksum
fields for outer UDP and GRE headers.

I have been told by Michael Chan that this is working.  Though this might
be somewhat redundant for IPv6 as they are forcing the checksum to be
computed for all IPv6 frames that are offloaded.  A follow-up patch may be
necessary in order to fix this as it is essentially mangling the outer IPv6
headers to add a checksum where none was requested.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mlx5 driver exposes support for TSO6 but not IPv6 csum for hardware
encapsulated tunnels.  This leads to issues as it triggers warnings in
skb_checksum_help as it ends up being called as we report supporting the
segmentation but not the checksumming for IPv6 frames.

This patch corrects that and drops 2 features that don't actually need to
be supported in hw_enc_features since they are Rx features and don't
actually impact anything by being present in hw_enc_features.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch assumes that the mlx5 hardware will ignore existing IPv4/v6
header fields for length and checksum as well as the length and checksum
fields for outer UDP headers.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

>From what I can tell the ConnectX-3 will support an inner IPv6 checksum and
segmentation offload, however it cannot support outer IPv6 headers.  This
assumption is based on the fact that I could see the checksum being
offloaded for inner header on IPv4 tunnels, but not on IPv6 tunnels.

For this reason I am adding the feature to the hw_enc_features and adding
an extra check to the features_check call that will disable GSO and
checksum offload in the case that the encapsulated frame has an outer IP
version of that is not 4.  The check in mlx4_en_features_check could be
removed if at some point in the future a fix is found that allows the
hardware to offload segmentation/checksum on tunnels with an outer IPv6
header.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch assumes that the mlx4 hardware will ignore existing IPv4/v6
header fields for length and checksum as well as the length and checksum
fields for outer UDP headers.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change makes it so that we will strip the TSO_MANGLEID bit if TSO is
not present.  This way we will also handle ECN correctly of TSO is not
present.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch addresses a possible issue that can occur if we get into any odd
corner cases where we support TSO for a given protocol but not the checksum
or scatter-gather offload.  There are few drivers floating around that
setup their tunnels this way and by enforcing the checksum piece we can
avoid mangling any frames.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the event that the number of partial segments is equal to 1 we don't
really need to perform partial segmentation offload.  As such we should
skip multiplying the MSS and instead just clear the partial_segs value
since it will not provide any gain to advertise the frame as being GSO when
it is a single frame.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's easier for gre_parse_header to return the header length instead of
filing it into a parameter. That way, the callers that don't care about the
header length can just check whether the returned value is lower than zero.

In gre_err, the tunnel header must not be pulled. See commit b7f8fe25
("gre: do not pull header in ICMP error processing") for details.

This patch reduces the conflict between the mentioned commit and commit
95f5c64c ("gre: Move utility functions to common headers").
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Under high rx pressure, it is possible tcp_sendmsg() never has a
chance to allocate an skb and loop forever as sk_flush_backlog()
would always return true.

Fix this by calling sk_flush_backlog() only if one skb had been
allocated and filled before last backlog check.

Fixes: d41a69f1 ("tcp: make tcp_sendmsg() aware of socket backlog")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	net/ipv4/ip_gre.c

Minor conflicts between tunnel bug fixes in net and
ipv6 tunnel cleanups in net-next.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:
 "Some straggler bug fixes:

   1) Batman-adv DAT must consider VLAN IDs when choosing candidate
      nodes, from Antonio Quartulli.

   2) Fix botched reference counting of vlan objects and neigh nodes in
      batman-adv, from Sven Eckelmann.

   3) netem can crash when it sees GSO packets, the fix is to segment
      then upon ->enqueue.  Fix from Neil Horman with help from Eric
      Dumazet.

   4) Fix VXLAN dependencies in mlx5 driver Kconfig, from Matthew
      Finlay.

   5) Handle VXLAN ops outside of rcu lock, via a workqueue, in mlx5,
      since it can sleep.  Fix also from Matthew Finlay.

   6) Check mdiobus_scan() return values properly in pxa168_eth and macb
      drivers.  From Sergei Shtylyov.

   7) If the netdevice doesn't support checksumming, disable
      segmentation.  From Alexandery Duyck.

   8) Fix races between RDS tcp accept and sending, from Sowmini
      Varadhan.

   9) In macb driver, probe MDIO bus before we register the netdev,
      otherwise we can try to open the device before it is really ready
      for that.  Fix from Florian Fainelli.

  10) Netlink attribute size for ILA "tunnels" not calculated properly,
      fix from Nicolas Dichtel"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  ipv6/ila: fix nlsize calculation for lwtunnel
  net: macb: Probe MDIO bus before registering netdev
  RDS: TCP: Synchronize accept() and connect() paths on t_conn_lock.
  RDS:TCP: Synchronize rds_tcp_accept_one with rds_send_xmit when resetting t_sock
  vxlan: Add checksum check to the features check function
  net: Disable segmentation if checksumming is not supported
  net: mvneta: Remove superfluous SMP function call
  macb: fix mdiobus_scan() error check
  pxa168_eth: fix mdiobus_scan() error check
  net/mlx5e: Use workqueue for vxlan ops
  net/mlx5e: Implement a mlx5e workqueue
  net/mlx5: Kconfig: Fix MLX5_EN/VXLAN build issue
  net/mlx5: Unmap only the relevant IO memory mapping
  netem: Segment GSO packets on enqueue
  batman-adv: Fix reference counting of hardif_neigh_node object for neigh_node
  batman-adv: Fix reference counting of vlan object for tt_local_entry
  batman-adv: B.A.T.M.A.N V - make sure iface is reactivated upon NETDEV_UP event
  batman-adv: fix DAT candidate selection (must use vid)

Pull fuse fixes from Miklos Szeredi:
 "Fix a regression and update the MAINTAINERS entry for fuse"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: update mailing list in MAINTAINERS
  fuse: Fix return value from fuse_get_user_pages()

The handler 'ila_fill_encap_info' adds one attribute: ILA_ATTR_LOCATOR.

Fixes: 65d7ab8d ("net: Identifier Locator Addressing module")
CC: Tom Herbert <tom@herbertland.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the sendmsg function of UDP, raw, ICMP and l2tp sockets, we use local
variables like hlimits, tclass, opt and dontfrag and pass them to corresponding
functions like ip6_make_skb, ip6_append_data and xxx_push_pending_frames.
This is not a good practice and makes it hard to add new parameters.
This fix introduces a new struct ipcm6_cookie similar to ipcm_cookie in
ipv4 and include the above mentioned variables. And we only pass the
pointer to this structure to corresponding functions. This makes it easier
to add new parameters in the future and makes the function cleaner.
Signed-off-by: NWei Wang <weiwan@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current sequence makes us register for a network device prior to
registering and probing the MDIO bus which could lead to some unwanted
consequences, like a thread of execution calling into ndo_open before
register_netdev() returns, while the MDIO bus is not ready yet.

Rework the sequence to register for the MDIO bus, and therefore attach
to a PHY prior to calling register_netdev(), which implies reworking the
error path a bit.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>