When xhci_discover_or_reset_device() is called after a host controller
power loss, the virtual device may need to be reallocated.  Make sure
xhci_alloc_dev() uses GFP_NOIO.  This avoid causing a deadlock by allowing
the kernel to flush pending I/O while reallocating memory for a virtual
device for a USB mass storage device that's holding the backing store for
dirty memory buffers.

This patch should be queued for the 2.6.37 stable tree.
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@kernel.org

When there's an xHCI host power loss after a suspend from memory, the USB
core attempts to reset and verify the USB devices that are attached to the
system.  The xHCI driver has to reallocate those devices, since the
hardware lost all knowledge of them during the power loss.

When a hub is plugged in, and the host loses power, the xHCI hardware
structures are not updated to say the device is a hub.  This is usually
done in hub_configure() when the USB hub is detected.  That function is
skipped during a reset and verify by the USB core, since the core restores
the old configuration and alternate settings, and the hub driver has no
idea this happened.  This bug makes the xHCI host controller reject the
enumeration of low speed devices under the resumed hub.

Therefore, make the USB core re-setup the internal xHCI hub device
information by calling update_hub_device() when hub_activate() is called
for a hub reset resume.  After a host power loss, all devices under the
roothub get a reset-resume or a disconnect.

This patch should be queued for the 2.6.37 stable tree.
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@kernel.org

when unloading xhci_hcd, I got:
[  134.856813] xhci_hcd 0000:02:00.0: remove, state 4
[  134.858140] usb usb3: USB disconnect, address 1
[  134.874956] xhci_hcd 0000:02:00.0: Host controller not halted, aborting reset.
[  134.876351] BUG: sleeping function called from invalid context at kernel/mutex.c:85
[  134.877657] in_atomic(): 0, irqs_disabled(): 1, pid: 1451, name: modprobe
[  134.878975] Pid: 1451, comm: modprobe Not tainted 2.6.37-rc5+ #162
[  134.880298] Call Trace:
[  134.881602]  [<ffffffff8104156a>] __might_sleep+0xeb/0xf0
[  134.882921]  [<ffffffff814763dc>] mutex_lock+0x24/0x50
[  134.884229]  [<ffffffff810a745c>] free_desc+0x2e/0x5f
[  134.885538]  [<ffffffff810a74c8>] irq_free_descs+0x3b/0x71
[  134.886853]  [<ffffffff8102584d>] free_irq_at+0x31/0x36
[  134.888167]  [<ffffffff8102723f>] destroy_irq+0x69/0x71
[  134.889486]  [<ffffffff8102747a>] native_teardown_msi_irq+0xe/0x10
[  134.890820]  [<ffffffff8124c382>] default_teardown_msi_irqs+0x57/0x80
[  134.892158]  [<ffffffff8124be46>] free_msi_irqs+0x8b/0xe9
[  134.893504]  [<ffffffff8124cd46>] pci_disable_msix+0x35/0x39
[  134.894844]  [<ffffffffa01b444a>] xhci_cleanup_msix+0x31/0x51 [xhci_hcd]
[  134.896186]  [<ffffffffa01b4b3a>] xhci_stop+0x3a/0x80 [xhci_hcd]
[  134.897521]  [<ffffffff81341dd4>] usb_remove_hcd+0xfd/0x14a
[  134.898859]  [<ffffffff813500ae>] usb_hcd_pci_remove+0x5c/0xc6
[  134.900193]  [<ffffffff8123c606>] pci_device_remove+0x3f/0x91
[  134.901535]  [<ffffffff812e7ea4>] __device_release_driver+0x83/0xd9
[  134.902899]  [<ffffffff812e8571>] driver_detach+0x86/0xad
[  134.904222]  [<ffffffff812e7d56>] bus_remove_driver+0xb2/0xd8
[  134.905540]  [<ffffffff812e8633>] driver_unregister+0x6c/0x74
[  134.906839]  [<ffffffff8123c8e4>] pci_unregister_driver+0x44/0x89
[  134.908121]  [<ffffffffa01b940e>] xhci_unregister_pci+0x15/0x17 [xhci_hcd]
[  134.909396]  [<ffffffffa01bd7d2>] xhci_hcd_cleanup+0xe/0x10 [xhci_hcd]
[  134.910652]  [<ffffffff8107fcd1>] sys_delete_module+0x1ca/0x23b
[  134.911882]  [<ffffffff81123932>] ? path_put+0x22/0x26
[  134.913104]  [<ffffffff8109a800>] ? audit_syscall_entry+0x2c/0x148
[  134.914333]  [<ffffffff8100ac82>] system_call_fastpath+0x16/0x1b
[  134.915658] xhci_hcd 0000:02:00.0: USB bus 3 deregistered
[  134.916465] xhci_hcd 0000:02:00.0: PCI INT A disabled

and the same issue when xhci_suspend is invoked.  (Note from Sarah: That's
fixed by Andiry's patch before this, by synchronizing the irqs rather than
freeing them on suspend.)

Do not run xhci_cleanup_msix with irq disabled.

This patch should be queued for the 2.6.37 stable tree.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@kernel.org

Synchronize the interrupts instead of free them in xhci_suspend(). This will
prevent a double free when the host is suspended and then the card removed.

Set the flag hcd->msix_enabled when using MSI-X, and check the flag in
suspend_common(). MSI-X synchronization will be handled by xhci_suspend(),
and MSI/INTx will be synchronized in suspend_common().

This patch should be queued for the 2.6.37 stable tree.
Reported-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NAndiry Xu <andiry.xu@amd.com>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@kernel.org

The original code that resumed the USB bus on a port status change would
only do so when there was a device connected to the port.  If a device was
just disconnected, the event would be queued for khubd, but khubd wouldn't
run.  That would leave the connect status change (CSC) bit set.

If a USB device was plugged into that same port, the xHCI host controller
would set the current connect status (CCS) bit.  But since the CSC bit was
already set, it would not generate an interrupt for a port status change
event.  That would mean the user could "Safely Remove" a device, have the
bus suspend, disconnect the device, re-plug it in, and then the device
would never be enumerated.

Plugging in a different device on another port would cause the bus to
resume, and khubd would notice the re-connected device.  Running lsusb
would also resume the bus, leading users to report the problem "went away"
when using diagnostic tools.

The solution is to resume the bus when a port status change event is
received, regardless of the port status.

Thank you very much to Maddog for helping me track down this Heisenbug.

This patch should be queued for the 2.6.37 stable tree.
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: NJon 'maddog' Hall <maddog@li.org>
Tested-by: NAndiry Xu <andiry.xu@amd.com>
Cc: stable@kernel.org

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (30 commits)
  MAINTAINERS: Add tomoyo-dev-en ML.
  SELinux: define permissions for DCB netlink messages
  encrypted-keys: style and other cleanup
  encrypted-keys: verify datablob size before converting to binary
  trusted-keys: kzalloc and other cleanup
  trusted-keys: additional TSS return code and other error handling
  syslog: check cap_syslog when dmesg_restrict
  Smack: Transmute labels on specified directories
  selinux: cache sidtab_context_to_sid results
  SELinux: do not compute transition labels on mountpoint labeled filesystems
  This patch adds a new security attribute to Smack called SMACK64EXEC. It defines label that is used while task is running.
  SELinux: merge policydb_index_classes and policydb_index_others
  selinux: convert part of the sym_val_to_name array to use flex_array
  selinux: convert type_val_to_struct to flex_array
  flex_array: fix flex_array_put_ptr macro to be valid C
  SELinux: do not set automatic i_ino in selinuxfs
  selinux: rework security_netlbl_secattr_to_sid
  SELinux: standardize return code handling in selinuxfs.c
  SELinux: standardize return code handling in selinuxfs.c
  SELinux: standardize return code handling in policydb.c
  ...

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (44 commits)
  hwmon: Support for Dallas Semiconductor DS620
  hwmon: driver for Sensirion SHT21 humidity and temperature sensor
  hwmon: Add humidity attribute to sysfs ABI
  hwmon: sysfs ABI updates
  hwmon: (via-cputemp) sync hotplug handling with coretemp/pkgtemp
  hwmon: (lm95241) Rewrite to avoid using macros
  hwmon: (applesmc) Fix checkpatch errors and fix value range checks
  hwmon: (applesmc) Update copyright information
  hwmon: (applesmc) Silence driver
  hwmon: (applesmc) Simplify feature sysfs handling
  hwmon: (applesmc) Dynamic creation of fan files
  hwmon: (applesmc) Extract all features generically
  hwmon: (applesmc) Handle new temperature format
  hwmon: (applesmc) Dynamic creation of temperature files
  hwmon: (applesmc) Introduce a register lookup table
  hwmon: (applesmc) Use pr_fmt and pr_<level>
  hwmon: (applesmc) Relax the severity of device init failure
  hwmon: (applesmc) Add MacBookAir3,1(3,2) support
  hwmon: (w83627hf) Use pr_fmt and pr_<level>
  hwmon: (w83627ehf) Use pr_fmt and pr_<level>
  ...

* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (29 commits)
  of/flattree: forward declare struct device_node in of_fdt.h
  ipmi: explicitly include of_address.h and of_irq.h
  sparc: explicitly cast negative phandle checks to s32
  powerpc/405: Fix missing #{address,size}-cells in i2c node
  powerpc/5200: dts: refactor dts files
  powerpc/5200: dts: Change combatible strings on localbus
  powerpc/5200: dts: remove unused properties
  powerpc/5200: dts: rename nodes to prepare for refactoring dts files
  of/flattree: Update dtc to current mainline.
  of/device: Don't register disabled devices
  powerpc/dts: fix syntax bugs in bluestone.dts
  of: Fixes for OF probing on little endian systems
  of: make drivers depend on CONFIG_OF instead of CONFIG_PPC_OF
  of/flattree: Add of_flat_dt_match() helper function
  of_serial: explicitly include of_irq.h
  of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree
  of/flattree: Reorder unflatten_dt_node
  of/flattree: Refactor unflatten_dt_node
  of/flattree: Add non-boottime device tree functions
  of/flattree: Add Kconfig for EARLY_FLATTREE
  ...

Fix up trivial conflict in arch/sparc/prom/tree_32.c as per Grant.

Remove kobject.h from files which don't need it, notably,
sched.h and fs.h.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove path.h from sched.h and other files.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'stable/bug-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/event: validate irq before get evtchn by irq
  xen/fb: fix potential memory leak
  xen/fb: fix xenfb suspend/resume race.
  xen: disable ACPI NUMA for PV guests
  xen/irq: Cleanup the find_unbound_irq

* 'stable/generic' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: HVM X2APIC support
  apic: Move hypervisor detection of x2apic to hypervisor.h

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slub: Fix a crash during slabinfo -v
  tracing/slab: Move kmalloc tracepoint out of inline code
  slub: Fix slub_lock down/up imbalance
  slub: Fix build breakage in Documentation/vm
  slub tracing: move trace calls out of always inlined functions to reduce kernel code size
  slub: move slabinfo.c to tools/slub/slabinfo.c

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  Documentation/kbuild: add info that 'choice' can have a symbol name
  kbuild: add numeric --set-val option to scripts/config
  headers_check: Fix warning text
  headers_check: better search for functions in headers
  scripts/coccinelle: update for compatability with Coccinelle 0.2.4
  tags: put function prototypes back!
  Kconfig: fix single letter command in scripts/config
  gitignore: add scripts/recordmcount

* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  deb-pkg: s/hdr/kernel_headers_/ && s/header/libc_headers_/
  deb-pkg: Make deb-pkg generate a seperate linux-libc-dev deb
  kbuild: create linux-headers package in deb-pkg
  kbuild, deb-pkg: support overriding userland architecture
  kbuild, deb-pkg: select userland architecture based on UTS_MACHINE
  kbuild, deb-pkg: Fix build with paranoid umask

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  nconf: handle comment entries within choice/endchoice
  kconfig: fix warning
  kconfig: Make expr_copy() take a const argument
  kconfig: simplify select-with-unmet-direct-dependency warning
  kconfig: add more S_INT and S_HEX consistency checks
  kconfig: fix `zconfdebug' extern declaration
  kconfig/conf: merge duplicate switch's case
  kconfig: fix typos
  kbuild/gconf: add dummy inline for bind_textdomain_codeset()
  kbuild/nconf: fix spaces damage
  kconfig: nuke second argument of conf_write_symbol()
  kconfig: do not define AUTOCONF_INCLUDED
  kconfig: the day kconfig warns about "select"-abuse has come

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  mkuboot.sh: Fail if mkimage is missing
  gen_init_cpio: checkpatch fixes
  gen_init_cpio: Avoid race between call to stat() and call to open()
  modpost: Fix address calculation in reloc_location()
  Make fixdep error handling more explicit
  checksyscalls: Fix stand-alone usage
  modpost: Put .zdebug* section on white list
  kbuild: fix interaction of CONFIG_IKCONFIG and KCONFIG_CONFIG
  kbuild: export linux/{a.out,kvm,kvm_para}.h on headers_install_all
  kbuild: introduce HDR_ARCH_LIST for headers_install_all
  headers_install: check exit status of unifdef
  gen_init_cpio: remove leading `/' from file names
  scripts/genksyms: fix header usage
  fixdep: use hash table instead of a single array

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_platform: Remove CONFIG_HAVE_PATA_PLATFORM's dependencies.
  pata_hpt37x: actually limit HPT370 to UltraDMA/66
  pata_hpt3x2n: coding style cleanup
  pata_hpt37x: coding style cleanup
  pata_hpt366: coding style cleanup
  pata_hpt3x2n: calculate average f_CNT
  pata_hpt3x2n: clarify about HPT371N support
  pata_hpt{37x|3x2n}: SATA mode filtering
  [libata] avoid needlessly passing around ptr to SCSI completion func
  [libata] new driver acard_ahci, for ATP8620 host controller

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (34 commits)
  HID: roccat: Update sysfs attribute doc
  HID: roccat: don't use #pragma pack
  HID: roccat: Add support for Roccat Kone[+] v2
  HID: roccat: reduce number of functions in kone and pyra drivers
  HID: roccat: declare meaning of pack pragma usage in driver headers
  HID: roccat: use class for char device for sysfs attribute creation
  sysfs: Introducing binary attributes for struct class
  HID: hidraw: add compatibility ioctl() for 32-bit applications.
  HID: hid-picolcd: Fix memory leak in picolcd_debug_out_report()
  HID: picolcd: fix misuse of logical operation in place of bitop
  HID: usbhid: base runtime PM on modern API
  HID: replace offsets values with their corresponding BTN_* defines
  HID: hid-mosart: support suspend/resume
  HID: hid-mosart: ignore buttons report
  HID: hid-picolcd: don't use flush_scheduled_work()
  HID: simplify an index check in hid_lookup_collection
  HID: Hoist assigns from ifs
  HID: Remove superfluous __inline__
  HID: Use vzalloc for vmalloc/memset(,0...)
  HID: Add and use hid_<level>: dev_<level> equivalents
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  spi / PM: Support dev_pm_ops
  PM: Prototype the pm_generic_ operations
  PM / Runtime: Generic resume shouldn't set RPM_ACTIVE unconditionally
  PM: Use dev_name() in core device suspend and resume routines
  PM: Permit registration of parentless devices during system suspend
  PM: Replace the device power.status field with a bit field
  PM: Remove redundant checks from core device resume routines
  PM: Use a different list of devices for each stage of device suspend
  PM: Avoid compiler warning in pm_noirq_op()
  PM: Use pm_wakeup_pending() in __device_suspend()
  PM / Wakeup: Replace pm_check_wakeup_events() with pm_wakeup_pending()
  PM: Prevent dpm_prepare() from returning errors unnecessarily
  PM: Fix references to basic-pm-debugging.txt in drivers-testing.txt
  PM / Runtime: Add synchronous runtime interface for interrupt handlers (v3)
  PM / Hibernate: When failed, in_suspend should be reset
  PM / Hibernate: hibernation_ops->leave should be checked too
  Freezer: Fix a race during freezing of TASK_STOPPED tasks
  PM: Use proper ccflag flag in kernel/power/Makefile
  PM / Runtime: Fix comments to match runtime callback code

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: use split transaction timeout only for split transactions
  firewire: ohci: consolidate context status flags
  firewire: ohci: cache the context run bit
  firewire: ohci: flush AT contexts after bus reset - addendum
  firewire: ohci: flush AT contexts after bus reset for OHCI 1.2
  firewire: net: set carrier state at ifup
  firewire: net: add carrier detection
  firewire: net: ratelimit error messages
  firewire: ohci: restart iso DMA contexts on resume from low power mode
  firewire: ohci: restore GUID on resume.
  firewire: ohci: use common buffer for self IDs and AR descriptors
  firewire: ohci: optimize iso context checks in the interrupt handler
  firewire: make PHY packet header format consistent
  firewire: ohci: properly clear posted write errors
  firewire: ohci: flush MMIO writes in the interrupt handler
  firewire: ohci: fix AT context initialization error handling
  firewire: ohci: Asynchronous Reception rewrite
  firewire: core: Update WARN uses
  firewire: nosy: char device is not seekable

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: unfold nilfs_dat_inode function
  nilfs2: do not pass sbi to functions which can get it from inode
  nilfs2: get rid of nilfs_mount_options structure
  nilfs2: simplify nilfs_mdt_freeze_buffer
  nilfs2: get rid of loaded flag from nilfs object
  nilfs2: fix a checkpatch error in page.c
  nilfs2: fiemap support
  nilfs2: mark buffer heads as delayed until the data is written to disk
  nilfs2: call nilfs_error inside bmap routines
  fs/nilfs2/super.c: Use printf extension %pV
  MAINTAINERS: add nilfs2 git tree entry

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: use CreationTime like an i_generation field
  cifs: switch cifs_open and cifs_create to use CIFSSMBUnixSetFileInfo
  cifs: show "acl" in DebugData Features when it's compiled in
  cifs: move "ntlmssp" and "local_leases" options out of experimental code
  cifs: replace some hardcoded values with preprocessor constants
  cifs: remove unnecessary locking around sequence_number
  [CIFS] Fix minor merge conflict in fs/cifs/dir.c
  CIFS: Simplify cifs_open code
  CIFS: Simplify non-posix open stuff (try #2)
  CIFS: Add match_port check during looking for an existing connection (try #4)
  CIFS: Simplify ipv*_connect functions into one (try #4)
  cifs: Support NTLM2 session security during NTLMSSP authentication [try #5]
  cifs: don't overwrite dentry name in d_revalidate

When retrieving the event channel number from irq, the irq
number may not be valid under some conditions.

So far that can be when we suspend/resume and irq ends with -1.
Validate and return sanitized irq and provide diagnostics information.

[v3: added unlikely on the WARN path]
[v2: reworded the commit message]
Signed-off-by: NJoe Jin <joe.jin@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: NGurudas Pai <gurudas.pai@oracle.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Andrew Morton <akpm@linux-foundation.org>

This patch fixes a potential memory leak when xenfb connect to
the backend fails.

Thanks for Ian's review and comments.

[v2: reworded the commit message a bit]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NJoe Jin <joe.jin@oracle.com>
Tested-by: NGurudas Pai <gurudas.pai@oracle.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Andrew Morton <akpm@linux-foundation.org>

When migrating guests over a long period we hit this:

<1>BUG: unable to handle kernel paging request at 0000000b819fdb98
<1>IP: [<ffffffff812a588f>] notify_remote_via_irq+0x13/0x34
<4>PGD 94b10067 PUD 0
<0>Oops: 0000 [#1] SMP
.. snip..
Call Trace:
 [<ffffffff812712c9>] xenfb_send_event+0x5c/0x5e
 [<ffffffff8100ea5f>] ? xen_restore_fl_direct_end+0x0/0x1
 [<ffffffff81438d80>] ? _spin_unlock_irqrestore+0x16/0x18
 [<ffffffff812714ee>] xenfb_refresh+0x1b1/0x1d7
 [<ffffffff81270568>] ? sys_imageblit+0x1ac/0x458
 [<ffffffff81271786>] xenfb_imageblit+0x2f/0x34
 [<ffffffff8126a3e5>] soft_cursor+0x1b5/0x1c8
 [<ffffffff8126a137>] bit_cursor+0x4b6/0x4d7
 [<ffffffff8100ea5f>] ? xen_restore_fl_direct_end+0x0/0x1
 [<ffffffff81438d80>] ? _spin_unlock_irqrestore+0x16/0x18
 [<ffffffff81269c81>] ? bit_cursor+0x0/0x4d7
 [<ffffffff812656b7>] fb_flashcursor+0xff/0x111
 [<ffffffff812655b8>] ? fb_flashcursor+0x0/0x111
 [<ffffffff81071812>] worker_thread+0x14d/0x1ed
 [<ffffffff81075a8c>] ? autoremove_wake_function+0x0/0x3d
 [<ffffffff81438d80>] ? _spin_unlock_irqrestore+0x16/0x18
 [<ffffffff810716c5>] ? worker_thread+0x0/0x1ed
 [<ffffffff810756e3>] kthread+0x6e/0x76
 [<ffffffff81012dea>] child_rip+0xa/0x20
 [<ffffffff81011fd1>] ? int_ret_from_sys_call+0x7/0x1b
 [<ffffffff8101275d>] ? retint_restore_args+0x5/0x6
 [<ffffffff81012de0>] ? child_rip+0x0/0x20
Code: 6b ff 0c 8b 87 a4 db 9f 81 66 85 c0 74 08 0f b7 f8 e8 3b ff ff ff c9
c3 55 48 89 e5 48 83 ec 10 0f 1f 44 00 00 89 ff 48 6b ff 0c <8b> 87 a4 db 9f
81 66 85 c0 74 14 48 8d 75 f0 0f b7 c0 bf 04 00
RIP  [<ffffffff812a588f>] notify_remote_via_irq+0x13/0x34
 RSP <ffff8800e7bf7bd0>
CR2: 0000000b819fdb98
---[ end trace 098b4b74827595d0 ]---

The root cause of the panic is the race between the resume and reconnect to the backend.

Clearing the 'update_wanted' flag of xenfb before disconnecting from the
backend fixes this issue.
Signed-off-by: NJoe Jin <joe.jin@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: NGurudas Pai <gurudas.pai@oracle.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Andrew Morton <akpm@linux-foundation.org>

Xen does not currently expose PV-NUMA information to PV
guests. Therefore disable NUMA for the time being to prevent the
kernel picking up on an host-level NUMA information which it might
come across in the firmware.

[ Added comment - Jeremy ]
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: sanitize work_start() in lowcomms.c
  dlm: reduce cond_resched during send
  dlm: use TCP_NODELAY
  dlm: Use cmwq for send and receive workqueues
  dlm: Handle application limited situations properly.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix ioctl ABI
  fuse: allow batching of FORGET requests
  fuse: separate queue for FORGET requests
  fuse: ioctl cleanup

Fix up trivial conflict in fs/fuse/inode.c due to RCU lookup having done
the RCU-freeing of the inode in fuse_destroy_inode().

Fix kernel-doc notation warnings in pipe_fs_i.h:

  Warning(include/linux/pipe_fs_i.h:58): No description found for parameter 'buffers'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix new kernel-doc notation warning in hrtimer.h:

  Warning(include/linux/hrtimer.h:150): Excess struct/union/enum/typedef member 'first' description in 'hrtimer_clock_base'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix new kernel-doc notation warning in dcache.h:

  Warning(include/linux/dcache.h:316): Excess function parameter 'Returns' description in '__d_rcu_to_refcount'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc:	Nick Piggin <npiggin@kernel.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix new kernel-doc notation warnings in fs/namei.c and spell
ECHILD correctly.

  Warning(fs/namei.c:218): No description found for parameter 'flags'
  Warning(fs/namei.c:425): Excess function parameter 'Returns' description in 'nameidata_drop_rcu'
  Warning(fs/namei.c:478): Excess function parameter 'Returns' description in 'nameidata_dentry_drop_rcu'
  Warning(fs/namei.c:540): Excess function parameter 'Returns' description in 'nameidata_drop_rcu_last'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc:	Nick Piggin <npiggin@kernel.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

nilfs_dat_inode function was a wrapper to switch between normal dat
inode and gcdat, a clone of the dat inode for garbage collection.

This function got obsolete when the gcdat inode was removed, and now
we can access the dat inode directly from a nilfs object.  So, we will
unfold the wrapper and remove it.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This removes argument for passing nilfs_sb_info structure from
nilfs_set_file_dirty and nilfs_load_inode_block functions.  We can get
a pointer to the structure from inodes.

[Stephen Rothwell <sfr@canb.auug.org.au>: fix conflict with commit
 b74c79e9]
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Only mount_opt member is used in the nilfs_mount_options structure,
and we can simplify it.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

nilfs_page_get_nth_block() function used in nilfs_mdt_freeze_buffer()
always returns a valid buffer head, so its validity check can be
removed.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

NILFS_LOADED flag of the nilfs object is not used now, so this will
remove it.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Will correct the following checkpatch error:

 ERROR: trailing whitespace
 #494: FILE: page.c:494:
 + $
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This adds fiemap to nilfs.  Two new functions, nilfs_fiemap and
nilfs_find_uncommitted_extent are added.

nilfs_fiemap() implements the fiemap inode operation, and
nilfs_find_uncommitted_extent() helps to get a range of data blocks
whose physical location has not been determined.

nilfs_fiemap() collects extent information by looping through
nilfs_bmap_lookup_contig and nilfs_find_uncommitted_extent routines.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>