The old code was based on a DHT11 datasheet which specifies a measurement
range of 20%-90% RH. Turns out the sensor actually reports values outside
this range, so we should support it as far as possible.
Reported-by: NEdward Attfield <edward@attfield.ca>
Signed-off-by: NHarald Geyer <harald@ccbib.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

This patch fixes the CHECKs reported by checkpatch.pl for "alignment
should match open parenthesis"
Signed-off-by: Nrodrigosiqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Add implementation for Analog Devices AD5272 and AD5274 digital
potentiometer devices.
Signed-off-by: NPhil Reid <preid@electromag.com.au>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Add binding documentation for Analog Devices AD5272 and AD5274 digital
potentiometer devices.
Signed-off-by: NPhil Reid <preid@electromag.com.au>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

iio_dev->mlock is to be used only by the IIO core for protecting
device mode changes between INDIO_DIRECT and INDIO_BUFFER.

This patch replaces the use of mlock with the already established
buf_lock mutex.

Introducing 'unlocked' forms of read and write registers. The
read/write frequency functions now require buf_lock to be held.
That's not obvious so avoid this but moving the locking inside
the functions where it is then clear that they are taking the
unlocked forms of the register read/write.

It isn't readily apparent that write frequency function requires
the locks to be taken, so move it inside the function to where it
is required to protect.

Also, the read raw does not require iio_dev->mlock for
reads. It can run concurrently as resource protection is handled
by buf_lock in read register.
Signed-off-by: NShreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Melexis has just released Infra Red temperature sensor MLX90632 used
for contact-less temperature measurement. Driver provides basic
functionality for reporting object (and ambient) temperature with
support for object emissivity.
Signed-off-by: NCrt Mori <cmo@melexis.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Add device tree bindings for MLX90632 IR temperature sensor.
Signed-off-by: NCrt Mori <cmo@melexis.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

There is no option to perform 64bit integer sqrt on 32bit platform.
Added stronger typed int_sqrt64 enables the 64bit calculations to
be performed on 32bit platforms. Using same algorithm as int_sqrt()
with strong typing provides enough precision also on 32bit platforms,
but it sacrifices some performance. In case values are smaller than
ULONG_MAX the standard int_sqrt is used for calculation to maximize the
performance due to more native calculations.
Signed-off-by: NCrt Mori <cmo@melexis.com>
Acked-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Introduce hw timestamp support instead of compute sample timestamps
according to interrupt rate and configured watermark. LSM6DSx based
devices are able to queue in hw FIFO the time reference of data
sampling
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

   Using an SPDX tag. Remove a license notice to keep
   the whole purpose of using an SPDx id.
Signed-off-by: NMilan Stevanovic <milan.o.stevanovic@gmail.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

    Add Linux device driver for TI single-channel CMOS
    8/10/12-bit analog-to-digital converter with a
    high-speed serial interface.
Signed-off-by: NMilan Stevanovic <milan.o.stevanovic@gmail.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Drivers should not 'select' a subsystem. Instead they should depend
on it. If the subsystem is disabled, the user probably did that for
a purpose and one driver shouldn't be changing that.

This also makes all IIO drivers consistent w.r.t depending on SYSFS
instead of selecting it.
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

The X-Powers AXP813 PMIC is really close to what is already done for
AXP20X/AXP22X.

There are two pairs of bits to set the rate (one for Voltage and Current
measurements and one for TS/GPIO0 voltage measurements) instead of one.

The register to set the ADC rates is different from the one for
AXP20X/AXP22X.

GPIO0 can be used as an ADC (measuring Volts) unlike for AXP22X.

The scales to apply to the different inputs are unlike the ones from
AXP20X and AXP22X.
Signed-off-by: NQuentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

To prepare for a future patch that will add a DT node for the ADC, make
axp20x_adc able to probe from DT and get the per-variant data from
of_device_id.data since platform_device_id.driver_data won't be set when
probing by DT.

Leave the ability to probe via platform for driver compatibility with
old DTs.
Signed-off-by: NQuentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

X-Powers PMICs have several ADC channels that can be used for different
purposes, e.g. PMIC internal temperature, battery voltage or AC current.

This is the documentation for AXP209, AXP221/223 and AXP813 ADC
bindings.
Signed-off-by: NQuentin Schulz <quentin.schulz@free-electrons.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

To prepare for a new comer that set a different register with different
values, move rate setting in a function that is specific to each AXP
variant.
Signed-off-by: NQuentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

The burnout currents can be enabled only if buffer is enabled
and CHOP is disabled.

So, if neither of these conditions are met, then
we should disable the burnout currents in the driver as well,
and warn the user.

This change doesn't fix anything.
The burnout currents simply won't work if CHOP is enabled
or buffer is disabled.
The intent is to provide the user with some feedback
instead of silently not working inside the chip.
Signed-off-by: NAlexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Remove unneeded error handling on the result of a call
to platform_get_resource() when the value is passed to
devm_ioremap_resource().
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Remove unnecessary unaligned access routine in hts221_read_oneshot() and
the related include
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Introduce regmap API support to access to i2c/spi bus instead of
using a custom support.
Remove lock mutex since concurrency is already managed by regmap API
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Remove following sparse warnings in hts221_parse_temp_caldata() and in
hts221_parse_rh_caldata():
drivers/iio/humidity/hts221_core.c:302:19: warning: cast to
restricted __le16
drivers/iio/humidity/hts221_core.c:314:18: warning: cast to
restricted __le16
drivers/iio/humidity/hts221_core.c:320:18: warning: cast to
restricted __le16
drivers/iio/humidity/hts221_core.c:355:18: warning: cast to
restricted __le16
drivers/iio/humidity/hts221_core.c:361:18: warning: cast to
restricted __le16

Fixes: e4a70e3e ("iio: humidity: add support to hts221 rh/temp combo device")
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

gcc-8 reports

drivers/iio/accel/st_accel_i2c.c: In function 'st_accel_i2c_probe':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 20 equals destination size [-Wstringop-truncation]

The compiler require that the length of the dest string is greater than
the length we want to copy to make sure the dest string is
nul-terminated. We can just use strlcpy() to avoid this warning.
Signed-off-by: NXiongfeng Wang <xiongfeng.wang@linaro.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

This patch changes the indentation of the statements after case labels.
The linux coding guidelines do not explicitly mentiond this but pretty
much all existing code doesn't put any statements into the same line of
their belonging case labels. Therefore this adapts to the more usual style.

Please note that there is still a lot of > 80 character lines which will
cause checkpatch warnings. This patch does not intent to fix this
already existing issue.
Signed-off-by: NMichael Panzlaff <michael.panzlaff@fau.de>
Signed-off-by: NTillmann Zipperer <tillmann.zipperer@fau.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The trailing semicolon is an empty statement that does nothing.
Removing it since it has no purpose.
Signed-off-by: NLuis de Bethencourt <luisbg@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: NLuis de Bethencourt <luisbg@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes the checkpatch message:

    CHECK: Alignment should match open parenthesis
    #1380: FILE: drivers/staging/fbtft/fbtft-core.c:1380:
    +		dev_warn(dev,
    +			"no default functions for regwidth=%d and buswidth=%d\n",
Signed-off-by: NLuis Gerhorst <linux-kernel@luisgerhorst.de>
Signed-off-by: NJonny Schaefer <schaefer.jonny@gmail.com>
Acked-by: NAlexander Wuerstlein <arw@cs.fau.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the misspelled constant to 'SWITCH_NO_ERR'.
Issue reported by checkpatch.pl
Signed-off-by: NSumit Pundir <pundirsumit11@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Several staging directories have TODO files that indicate a
subsystem will be removed in the future.

Using a status entry of "S:	Obsolete" helps indicate the
subsystem files should not be modified unnecessarily.

checkpatch also tests this setting and emits a warning that
the matching subsystem files should not be modified.

This might help avoid receiving patches that will be dropped.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: NLuis de Bethencourt <luisbg@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Casting a value returned by memory an allocation function is
not required and can be removed. Also add in a newline after before
the first statement. Code clean up as suggested by coccinelle.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch warnings:

  CHECK: Alignment should match open parenthesis
Signed-off-by: NValentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The dma mask var was defined as dma_addr_t but should be
u64. This showed as a sparse warning when building for 32 bit.
Fix it by changing type to u64 and drop the cast.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The debugfs interface defines stub function if debugfs is not
enabled, which were missing the 'static inline' qualifiers causing
sparse warnings.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the missing include of include file with function declarations.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove include files not needed for compilation.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The ccree driver source files were using an inconsistent
naming convention stemming from what the company was called
when they were added.

Move to a single consistent naming convention for better
code readability.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

LIBCFS_ALLOC
LIBCFS_ALLOC_ATOMIC
LIBCFS_ALLOC_POST
LIBCFS_CPT_ALLOC
LIBCFS_FREE

are no longer used, and so are removed.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

LIBCFS_APT_ALLOC() calls kvmalloc_node() with GFP_NOFS
which is not permitted.
Mostly, a kmalloc_node(GFP_NOFS) is appropriate, though occasionally
the allocation is large and GFP_KERNEL is acceptable, so
kvmalloc_node() can be used.

This patch introduces 4 alternatives to LIBCFS_CPT_ALLOC():
 kmalloc_cpt()
 kzalloc_cpt()
 kvmalloc_cpt()
 kvzalloc_cpt().

Each takes a size, gfp flags, and cpt number.

Almost every call to LIBCFS_CPT_ALLOC() passes lnet_cpt_table()
as the table.  This patch embeds that choice in the k*alloc_cpt()
macros, and opencode kzalloc_node(..., cfs_cpt_spread_node(..))
in the one case that lnet_cpt_table() isn't used.

When LIBCFS_CPT_ALLOC() is replaced, the matching LIBCFS_FREE()
is also replaced, with with kfree() or kvfree() as appropriate.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Just call kzalloc(GFP_ATOMIC) directly.
We don't need the warning on failure.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>