Dirty logging is a key feature of the KVM MMU and must be supported by
the TDP MMU. Add support for both the write protection and PML dirty
logging modes.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: NBen Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-16-bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. Add
a hook and handle the change_pte MMU notifier.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: NBen Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-15-bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. The
main Linux MM uses the access tracking MMU notifiers for swap and other
features. Add hooks to handle the test/flush HVA (range) family of
MMU notifiers.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: NBen Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-14-bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. Add
hooks to handle the invalidate range family of MMU notifiers.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: NBen Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-13-bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Attach struct kvm_mmu_pages to every page in the TDP MMU to track
metadata, facilitate NX reclaim, and enable inproved parallelism of MMU
operations in future patches.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: NBen Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-12-bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add functions to handle page faults in the TDP MMU. These page faults
are currently handled in much the same way as the x86 shadow paging
based MMU, however the ordering of some operations is slightly
different. Future patches will add eager NX splitting, a fast page fault
handler, and parallel page faults.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: NBen Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-11-bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In order to avoid creating executable hugepages in the TDP MMU PF
handler, remove the dependency between disallowed_hugepage_adjust and
the shadow_walk_iterator. This will open the function up to being used
by the TDP MMU PF handler in a future patch.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: NBen Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-10-bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add functions to zap SPTEs to the TDP MMU. These are needed to tear down
TDP MMU roots properly and implement other MMU functions which require
tearing down mappings. Future patches will add functions to populate the
page tables, but as for this patch there will not be any work for these
functions to do.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: NBen Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-8-bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Cache the address space ID just like the slot ID.  It will be used in
order to fill in the dirty ring entries.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Suggested-by: NSean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20201014182700.2888246-7-bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The existing bookkeeping done by KVM when a PTE is changed is spread
around several functions. This makes it difficult to remember all the
stats, bitmaps, and other subsystems that need to be updated whenever a
PTE is modified. When a non-leaf PTE is marked non-present or becomes a
leaf PTE, page table memory must also be freed. To simplify the MMU and
facilitate the use of atomic operations on SPTEs in future patches, create
functions to handle some of the bookkeeping required as a result of
a change.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: NBen Gardon <bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The TDP MMU must be able to allocate paging structure root pages and track
the usage of those pages. Implement a similar, but separate system for root
page allocation to that of the x86 shadow paging implementation. When
future patches add synchronization model changes to allow for parallel
page faults, these pages will need to be handled differently from the
x86 shadow paging based MMU's root pages.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: NBen Gardon <bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The TDP MMU offers an alternative mode of operation to the x86 shadow
paging based MMU, optimized for running an L1 guest with TDP. The TDP MMU
will require new fields that need to be initialized and torn down. Add
hooks into the existing KVM MMU initialization process to do that
initialization / cleanup. Currently the initialization and cleanup
fucntions do not do very much, however more operations will be added in
future patches.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: NBen Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-4-bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The TDP iterator implements a pre-order traversal of a TDP paging
structure. This iterator will be used in future patches to create
an efficient implementation of the KVM MMU for the TDP case.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: NBen Gardon <bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The SPTE format will be common to both the shadow and the TDP MMU.

Extract code that implements the format to a separate module, as a
first step towards adding the TDP MMU and putting mmu.c on a diet.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The TDP MMU's own function for the changed-PTE notifier will need to be
update a PTE in the exact same way as the shadow MMU.  Rather than
re-implementing this logic, factor the SPTE creation out of kvm_set_pte_rmapp.

Extracted out of a patch by Ben Gardon. <bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Separate the functions for generating leaf page table entries from the
function that inserts them into the paging structure. This refactoring
will facilitate changes to the MMU sychronization model to use atomic
compare / exchanges (which are not guaranteed to succeed) instead of a
monolithic MMU lock.

No functional change expected.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This commit introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: NBen Gardon <bgardon@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The TDP MMU page fault handler will need to be able to create non-leaf
SPTEs to build up the paging structures. Rather than re-implementing the
function, factor the SPTE creation out of link_shadow_page.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: NBen Gardon <bgardon@google.com>
Message-Id: <20200925212302.3979661-9-bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pick up bugfixes from 5.9, otherwise various tests fail.

This should be const, so make it so.
Signed-off-by: NJoe Perches <joe@perches.com>
Message-Id: <d130e88dd4c82a12d979da747cc0365c72c3ba15.1601770305.git.joe@perches.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add FSGSBASE to the set of possible guest-owned CR4 bits, i.e. let the
guest own it on VMX.  KVM never queries the guest's CR4.FSGSBASE value,
thus there is no reason to force VM-Exit on FSGSBASE being toggled.

Note, because FSGSBASE is conditionally available, this is dependent on
recent changes to intercept reserved CR4 bits and to update the CR4
guest/host mask in response to guest CPUID changes.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLai Jiangshan <laijs@linux.alibaba.com>
[sean: added justification in changelog]
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-6-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Intercept CR4 bits that are guest reserved so that KVM correctly injects
a #GP fault if the guest attempts to set a reserved bit.  If a feature
is supported by the CPU but is not exposed to the guest, and its
associated CR4 bit is not intercepted by KVM by default, then KVM will
fail to inject a #GP if the guest sets the CR4 bit without triggering
an exit, e.g. by toggling only the bit in question.

Note, KVM doesn't give the guest direct access to any CR4 bits that are
also dependent on guest CPUID.  Yet.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-5-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that vcpu_after_set_cpuid() and update_exception_bitmap() are called
back-to-back, subsume the exception bitmap update into the common CPUID
update.  Drop the SVM invocation entirely as SVM's exception bitmap
doesn't vary with respect to guest CPUID.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-4-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move the call to kvm_x86_ops.vcpu_after_set_cpuid() to the very end of
kvm_vcpu_after_set_cpuid() to allow the vendor implementation to react
to changes made by the common code.  In the near future, this will be
used by VMX to update its CR4 guest/host masks to account for reserved
bits.  In the long term, SGX support will update the allowed XCR0 mask
for enclaves based on the vCPU's allowed XCR0.

vcpu_after_set_cpuid() (nee kvm_update_cpuid()) was originally added by
commit 2acf923e ("KVM: VMX: Enable XSAVE/XRSTOR for guest"), and was
called separately after kvm_x86_ops.vcpu_after_set_cpuid() (nee
kvm_x86_ops->cpuid_update()).  There is no indication that the placement
of the common code updates after the vendor updates was anything more
than a "new function at the end" decision.

Inspection of the current code reveals no dependency on kvm_x86_ops'
vcpu_after_set_cpuid() in kvm_vcpu_after_set_cpuid() or any of its
helpers.  The bulk of the common code depends only on the guest's CPUID
configuration, kvm_mmu_reset_context() does not consume dynamic vendor
state, and there are no collisions between kvm_pmu_refresh() and VMX's
update of PT state.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-3-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Unconditionally intercept changes to CR4.LA57 so that KVM correctly
injects a #GP fault if the guest attempts to set CR4.LA57 when it's
supported in hardware but not exposed to the guest.

Long term, KVM needs to properly handle CR4 bits that can be under guest
control but also may be reserved from the guest's perspective.  But, KVM
currently sets the CR4 guest/host mask only during vCPU creation, and
reworking flows to change that will take a bit of elbow grease.

Even if/when generic support for intercepting reserved bits exists, it's
probably not worth letting the guest set CR4.LA57 directly.  LA57 can't
be toggled while long mode is enabled, thus it's all but guaranteed to
be set once (maybe twice, e.g. by BIOS and kernel) during boot and never
touched again.  On the flip side, letting the guest own CR4.LA57 may
incur extra VMREADs.  In other words, this temporary "hack" is probably
also the right long term fix.

Fixes: fd8cb433 ("KVM: MMU: Expose the LA57 feature to VM.")
Cc: stable@vger.kernel.org
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: NLai Jiangshan <laijs@linux.alibaba.com>
[sean: rewrote changelog]
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-2-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The function amd_ir_set_vcpu_affinity makes use of the parameter struct
amd_iommu_pi_data.prev_ga_tag to determine if it should delete struct
amd_iommu_pi_data from a list when not running in AVIC mode.

However, prev_ga_tag is initialized only when AVIC is enabled. The non-zero
uninitialized value can cause unintended code path, which ends up making
use of the struct vcpu_svm.ir_list and ir_list_lock without being
initialized (since they are intended only for the AVIC case).

This triggers NULL pointer dereference bug in the function vm_ir_list_del
with the following call trace:

    svm_update_pi_irte+0x3c2/0x550 [kvm_amd]
    ? proc_create_single_data+0x41/0x50
    kvm_arch_irq_bypass_add_producer+0x40/0x60 [kvm]
    __connect+0x5f/0xb0 [irqbypass]
    irq_bypass_register_producer+0xf8/0x120 [irqbypass]
    vfio_msi_set_vector_signal+0x1de/0x2d0 [vfio_pci]
    vfio_msi_set_block+0x77/0xe0 [vfio_pci]
    vfio_pci_set_msi_trigger+0x25c/0x2f0 [vfio_pci]
    vfio_pci_set_irqs_ioctl+0x88/0xb0 [vfio_pci]
    vfio_pci_ioctl+0x2ea/0xed0 [vfio_pci]
    ? alloc_file_pseudo+0xa5/0x100
    vfio_device_fops_unl_ioctl+0x26/0x30 [vfio]
    ? vfio_device_fops_unl_ioctl+0x26/0x30 [vfio]
    __x64_sys_ioctl+0x96/0xd0
    do_syscall_64+0x37/0x80
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Therefore, initialize prev_ga_tag to zero before use. This should be safe
because ga_tag value 0 is invalid (see function avic_vm_init).

Fixes: dfa20099 ("KVM: SVM: Refactor AVIC vcpu initialization into avic_init_vcpu()")
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20201003232707.4662-1-suravee.suthikulpanit@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This way we don't waste memory on VMs which don't use nesting
virtualization even when the host enabled it for them.
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-5-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This will be used to signal an error to the userspace, in case
the vendor code failed during handling of this msr. (e.g -ENOMEM)
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-4-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This will allow the KVM to report such errors (e.g -ENOMEM)
to the userspace.
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-3-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Return 1 on errors that are caused by wrong guest behavior
(which will inject #GP to the guest)

And return a negative error value on issues that are
the kernel's fault (e.g -ENOMEM)
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-2-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

These should be const, so make it so.
Signed-off-by: NJoe Perches <joe@perches.com>
Message-Id: <ed95eef4f10fc1317b66936c05bc7dd8f943a6d5.1601770305.git.joe@perches.com>
Reviewed-by: NBen Gardon <bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

As vcpu->arch.cpuid_entries is now allocated dynamically, the only
remaining use for KVM_MAX_CPUID_ENTRIES is to check KVM_SET_CPUID/
KVM_SET_CPUID2 input for sanity. Since it was reported that the
current limit (80) is insufficient for some CPUs, bump
KVM_MAX_CPUID_ENTRIES and use an arbitrary value '256' as the new
limit.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201001130541.1398392-4-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The current limit for guest CPUID leaves (KVM_MAX_CPUID_ENTRIES, 80)
is reported to be insufficient but before we bump it let's switch to
allocating vcpu->arch.cpuid_entries[] array dynamically. Currently,
'struct kvm_cpuid_entry2' is 40 bytes so vcpu->arch.cpuid_entries is
3200 bytes which accounts for 1/4 of the whole 'struct kvm_vcpu_arch'
but having it pre-allocated (for all vCPUs which we also pre-allocate)
gives us no real benefits.

Another plus of the dynamic allocation is that we now do kvm_check_cpuid()
check before we assign anything to vcpu->arch.cpuid_nent/cpuid_entries so
no changes are made in case the check fails.

Opportunistically remove unneeded 'out' labels from
kvm_vcpu_ioctl_set_cpuid()/kvm_vcpu_ioctl_set_cpuid2() and return
directly whenever possible.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201001130541.1398392-3-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>

As a preparatory step to allocating vcpu->arch.cpuid_entries dynamically
make kvm_check_cpuid() check work with an arbitrary 'struct kvm_cpuid_entry2'
array.

Currently, when kvm_check_cpuid() fails we reset vcpu->arch.cpuid_nent to
0 and this is kind of weird, i.e. one would expect CPUIDs to remain
unchanged when KVM_SET_CPUID[2] call fails.

No functional change intended. It would've been possible to move the updated
kvm_check_cpuid() in kvm_vcpu_ioctl_set_cpuid2() and check the supplied
input before we start updating vcpu->arch.cpuid_entries/nent but we
can't do the same in kvm_vcpu_ioctl_set_cpuid() as we'll have to copy
'struct kvm_cpuid_entry' entries first. The change will be made when
vcpu->arch.cpuid_entries[] array becomes allocated dynamically.
Suggested-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201001130541.1398392-2-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Change-Id: I0c6355b09fedf8f9cc4cc5f51be418e2c1c82b7b
Message-Id: <20200818152429.1923996-5-oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM unconditionally provides PV features to the guest, regardless of the
configured CPUID. An unwitting guest that doesn't check
KVM_CPUID_FEATURES before use could access paravirt features that
userspace did not intend to provide. Fix this by checking the guest's
CPUID before performing any paravirtual operations.

Introduce a capability, KVM_CAP_ENFORCE_PV_FEATURE_CPUID, to gate the
aforementioned enforcement. Migrating a VM from a host w/o this patch to
a host with this patch could silently change the ABI exposed to the
guest, warranting that we default to the old behavior and opt-in for
the new one.
Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Change-Id: I202a0926f65035b872bfe8ad15307c026de59a98
Message-Id: <20200818152429.1923996-4-oupton@google.com>
Reviewed-by: NWanpeng Li <wanpengli@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Small change to avoid meaningless duplication in the subsequent patch.
No functional change intended.
Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Change-Id: I77ab9cdad239790766b7a49d5cbae5e57a3005ea
Message-Id: <20200818152429.1923996-3-oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No functional change intended.
Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Reviewed-by: NWanpeng Li <wanpengli@tencent.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Change-Id: I7cbe71069db98d1ded612fd2ef088b70e7618426
Message-Id: <20200818152429.1923996-2-oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM was switched to interrupt-based mechanism for 'page ready' event
delivery in Linux-5.8 (see commit 2635b5c4 ("KVM: x86: interrupt based
APF 'page ready' event delivery")) and #PF (ab)use for 'page ready' event
delivery was removed. Linux guest switched to this new mechanism
exclusively in 5.9 (see commit b1d40575 ("KVM: x86: Switch KVM guest to
using interrupts for page ready APF delivery")) so it is not possible to
get #PF for a 'page ready' event even when the guest is running on top
of an older KVM (APF mechanism won't be enabled). Update the comment in
exc_page_fault() to reflect the new reality.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201002154313.1505327-1-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Let KVM_WERROR depend on KVM, so it doesn't show in menuconfig alone.
Signed-off-by: NMatteo Croce <mcroce@microsoft.com>
Message-Id: <20201001112014.9561-1-mcroce@linux.microsoft.com>
Fixes: 4f337faf ("KVM: allow disabling -Werror")
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Fixes: e287d6de ("Documentation: kvm: Convert cpuid.txt to .rst")
Signed-off-by: NLi Qiang <liq3ea@163.com>
Message-Id: <20201001095333.7611-1-liq3ea@163.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>