- 30 1月, 2017 1 次提交
-
-
由 Christian Borntraeger 提交于
When we access guest memory and run into a protection exception, we need to pass the exception data to the guest. ESOP2 provides detailed information about all protection exceptions which ESOP1 only partially provided. The gaccess changes make sure, that the guest always gets all available information. Signed-off-by: NJanosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 26 12月, 2016 1 次提交
-
-
由 Thomas Gleixner 提交于
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
-
- 25 12月, 2016 3 次提交
-
-
由 Thomas Gleixner 提交于
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
-
由 Thomas Gleixner 提交于
When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Linus Torvalds 提交于
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 12月, 2016 2 次提交
-
-
由 Heiko Carstens 提交于
s390 version of commit 334bb773 ("x86/kbuild: enable modversions for symbols exported from asm") so we get also rid of all these warnings: WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "memcpy" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "memmove" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "memset" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "save_fpu_regs" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "sie64a" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "sie_exit" [vmlinux] version generation failed, symbol will not be versioned. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
There is a slight misaccounting of system time in vtime_account_user. This function is called once per HZ tick in interrupt context. The irq_enter function already accounted the system time up to the point of the irq_enter call. The system time from irq_enter until vtime_account_user/do_account_vtime is reached is irq time but it is accounted to the previous context. Just drop the hardirq offset from arch/s390/kernel/vtime.c. Reported-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 12月, 2016 10 次提交
-
-
由 Sebastian Ott 提交于
Query the length of the fmb and abort fmb registration if the size of the associated measurement block is too small. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Add the missing memory clobber / barrier to dcss_set_subcodes() to tell the compiler that the inline assembly accesses memory (name string). Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Add missing memory clobbers / barriers or use the Q constraint where possible to tell the compiler that the inline assemblies actually access memory and not only pointers to memory. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
We have a couple of inline assemblies like memchr() and strlen() that read from memory, but tell the compiler only they need the addresses of the strings they access. This allows the compiler to omit the initialization of such strings and therefore generate broken code. Add the missing memory barrier to all string related inline assemblies to fix this potential issue. It looks like the compiler currently does not generate broken code due to these bugs. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
The qsi inline assembly takes an initialized "cc" variable as output operand but specifies it as write-to operand only instead of read/write operand. This allows the compiler to omit the initialization, which in fact it also does (gcc 6.1). Use the "+" constraint modifier to fix this. In addition also use the Q constraint to specify the hws_qsi_info_block memory location, so the compiler can generate slightly better code. Also get rid of the cc clobber since none of the instructions within the inline assembly modify the condition code. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Two of the messages introduced by the memblock conversion are reworded. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Old gcc versions can't handle a bogus early clobber on a Q constraint: arch/s390/kernel/early.c: In function 'memmove_early.part.1': arch/s390/kernel/early.c:432:2: error: '&' constraint used with no register class Simply remove it to fix this. Reported-by: NStefan Haberland <sth@linux.vnet.ibm.com> Fixes: d543a106 ("s390: fix initrd corruptions with gcov/kcov instrumented kernels") Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Harald Freudenberger 提交于
This patch introduces tracepoint definitions and tracepoint event invocations for the s390 zcrypt device. Currently there are just two tracepoint events defined. An s390_zcrypt_req request event occurs as soon as the request is recognized by the zcrypt ioctl function. This event may act as some kind of request-processing-starts-now indication. As late as possible within the zcrypt ioctl function there occurs the s390_zcrypt_rep event which may act as the point in time where the request has been processed by the kernel and the result is about to be transferred back to userspace. The glue which binds together request and reply event is the ptr parameter, which is the local buffer address where the request from userspace has been stored by the ioctl function. The main purpose of this zcrypt tracepoint patch is to get some data for performance measurements together with information about the kind of request and on which card and queue the request has been processed. It is not an ffdc interface as there is already code in the zcrypt device driver to serve the s390 debug feature interface. Signed-off-by: NHarald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Ingo Tuchscherer 提交于
Introduce new ioctl (ZDEVICESTATUS) to provide detailed information, like hardware type, domains, status and functionality of available crypto devices. Signed-off-by: NIngo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Paul Bolle 提交于
Commit 4fd06960 ("Use the new x86 setup code for i386") introduced a reference to the make variable LINUX_INCLUDE. That reference got moved around a bit and copied twice and now there are three references to it. There has never been a definition of that variable. (Presumably that is because it started out as a mistyped reference to LINUXINCLUDE.) So this reference has always been an empty string. Let's remove it before it spreads any further. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 13 12月, 2016 4 次提交
-
-
由 Johannes Weiner 提交于
The bug in khugepaged fixed earlier in this series shows that radix tree slot replacement is fragile; and it will become more so when not only NULL<->!NULL transitions need to be caught but transitions from and to exceptional entries as well. We need checks. Re-implement radix_tree_replace_slot() on top of the sanity-checked __radix_tree_replace(). This requires existing callers to also pass the radix tree root, but it'll warn us when somebody replaces slots with contents that need proper accounting (transitions between NULL entries, real entries, exceptional entries) and where a replacement through the slot pointer would corrupt the radix tree node counts. Link: http://lkml.kernel.org/r/20161117193021.GB23430@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org> Suggested-by: NJan Kara <jack@suse.cz> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aneesh Kumar K.V 提交于
Now that we check for page size change early in the loop, we can partially revert e9d55e15 ("mm: change the interface for __tlb_remove_page"). This simplies the code much, by removing the need to track the last address with which we adjusted the range. We also go back to the older way of filling the mmu_gather array, ie, we add an entry and then check whether the gather batch is full. Link: http://lkml.kernel.org/r/20161026084839.27299-6-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aneesh Kumar K.V 提交于
With commit e77b0852 ("mm/mmu_gather: track page size with mmu gather and force flush if page size change") we added the ability to force a tlb flush when the page size change in a mmu_gather loop. We did that by checking for a page size change every time we added a page to mmu_gather for lazy flush/remove. We can improve that by moving the page size change check early and not doing it every time we add a page. This also helps us to do tlb flush when invalidating a range covering dax mapping. Wrt dax mapping we don't have a backing struct page and hence we don't call tlb_remove_page, which earlier forced the tlb flush on page size change. Moving the page size change check earlier means we will do the same even for dax mapping. We also avoid doing this check on architecture other than powerpc. In a later patch we will remove page size check from tlb_remove_page(). Link: http://lkml.kernel.org/r/20161026084839.27299-5-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aneesh Kumar K.V 提交于
This add tlb_remove_hugetlb_entry similar to tlb_remove_pmd_tlb_entry. Link: http://lkml.kernel.org/r/20161026084839.27299-4-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 12月, 2016 8 次提交
-
-
由 Christian Borntraeger 提交于
Newer hardware provides the level of virtualization that a particular sample belongs to. Use that information and fall back to the old heuristics if the sample does not contain that information. Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Provide an s390 specific memmove implementation which is faster than the generic implementation which copies byte-wise. For non-destructive (as defined by the mvc instruction) memmove operations the following table compares the old default implementation versus the new s390 specific implementation: size old new 1 1ns 8ns 2 2ns 8ns 4 4ns 8ns 8 7ns 8ns 16 17ns 8ns 32 35ns 8ns 64 65ns 9ns 128 146ns 10ns 256 298ns 11ns 512 537ns 11ns 1024 1193ns 19ns 2048 2405ns 36ns So only for very small sizes the old implementation is faster. For overlapping memmoves, where the mvc instruction can't be used, the new implementation is as slow as the old one. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Group all compiler flag modification lines together and sort them alphabetically. This should hopefully prevent future bugs due to missing flag modifications. Also fix indentation at some places. Reviewed-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
The early C code within arch/s390/kernel/early.c saves ipl parameters before the bss section is cleared. When doing that it jumps to code that is potentially gcov/kcov instrumented. That code in turn will corrupt an initrd that potentially may reside in the not yet ready to be used bss section. Instead of excluding more and more code from gcov/kcov instrumentation provide an early memmove function which will be used to save ipl parameters. The verification if these parameters are actually valid will be done later. Reviewed-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Early C code must be excluded from gcov profiling since it may write to the bss section before - a potential initrd that resides there is rescued - the bss section is initialized (zeroed) This patch only addresses the problem that early code is instrumented for profiling, but not the problem that it jumps into other code that is still instrumented. That problem will be fixed with a follow-on patch. Reviewed-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
With this feature, the DASD device driver more robustly handles DASDs that are attached via multiple channel paths and are subject to constant Interface-Control-Checks (IFCCs) and Channel-Control-Checks (CCCs) or loss of High-Performance-FICON (HPF) functionality on one or more of these paths. If a channel path does not work correctly, it is removed from normal operation as long as other channel paths are available. All extended error recovery states can be queried and reset via user space interfaces. Signed-off-by: NStefan Haberland <sth@linux.vnet.ibm.com> Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NJan Hoeppner <hoeppner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Dan Carpenter 提交于
We added some new locking but forgot to unlock on error. Fixes: 57127645 ("s390/zcrypt: Introduce new SHA-512 based Pseudo Random Generator.") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 09 12月, 2016 1 次提交
-
-
由 Martin KaFai Lau 提交于
This patch allows XDP prog to extend/remove the packet data at the head (like adding or removing header). It is done by adding a new XDP helper bpf_xdp_adjust_head(). It also renames bpf_helper_changes_skb_data() to bpf_helper_changes_pkt_data() to better reflect that XDP prog does not work on skb. This patch adds one "xdp_adjust_head" bit to bpf_prog for the XDP-capable driver to check if the XDP prog requires bpf_xdp_adjust_head() support. The driver can then decide to error out during XDP_SETUP_PROG. Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 12月, 2016 10 次提交
-
-
由 Viktor Mihajlovski 提交于
Extract extended name and UUID from SYSIB 2.2.2 data. As the code to convert the raw extended name into printable format can be reused by stsi_2_2_2 we're moving the conversion code into a separate function convert_ext_name. Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com> Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
It is required to have an early static cpu to node mapping. This patch pins all possible cpus to nodes for which no topology information is present. Since there is no interface available which would allow to tell where a non-present cpu would appear topology-wise, simply use a round robin algorithm. Right now this makes sure that the cpu_to_node() function will return the same value for a cpu during the life time of the system. Acked-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Initialize the cpu topology and therefore also the cpu to node mapping much earlier. Fixes this warning and subsequent crashes when using the fake numa emulation mode on s390: WARNING: CPU: 0 PID: 1 at include/linux/cpumask.h:121 select_task_rq+0xe6/0x1a8 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc6-00001-ge9d867a6-dirty #28 task: 00000001dd270008 ti: 00000001eccb4000 task.ti: 00000001eccb4000 Krnl PSW : 0404c00180000000 0000000000176c56 (select_task_rq+0xe6/0x1a8) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Call Trace: ([<0000000000176c30>] select_task_rq+0xc0/0x1a8) ([<0000000000177d64>] try_to_wake_up+0x2e4/0x478) ([<000000000015d46c>] create_worker+0x174/0x1c0) ([<0000000000161a98>] alloc_unbound_pwq+0x360/0x438) ([<0000000000162550>] apply_wqattrs_prepare+0x200/0x2a0) ([<000000000016266a>] apply_workqueue_attrs_locked+0x7a/0xb0) ([<0000000000162af0>] apply_workqueue_attrs+0x50/0x78) ([<000000000016441c>] __alloc_workqueue_key+0x304/0x520) ([<0000000000ee3706>] default_bdi_init+0x3e/0x70) ([<0000000000100270>] do_one_initcall+0x140/0x1d8) ([<0000000000ec9da8>] kernel_init_freeable+0x220/0x2d8) ([<0000000000984a7a>] kernel_init+0x2a/0x150) ([<00000000009913fa>] kernel_thread_starter+0x6/0xc) ([<00000000009913f4>] kernel_thread_starter+0x0/0xc) Reviewed-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
CPU topology information like cpu to node mapping must be setup in setup_arch already. Topology information is currently made available with a per cpu variable; this however will not work when the initialization will be moved to setup_arch, since the generic percpu setup will be done much later. Therefore convert back to a cpu_topology array. Reviewed-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
In order to be able to setup the cpu to node mappings early it is a prerequisite to know which cpus are present. Therefore cpus must be detected much earlier than before. For sclp based cpu detection this requires yet another early sclp call, since the system is not ready to use the regular interrupt and memory allocations. Reviewed-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
The s390 specific sched_domain_topology_level should always be used, not only if the machine provides topology information. Luckily this odd behaviour, that was by accident introduced with git commit d05d15da ("s390/topology: delay initialization of topology cpu masks") has currently no side effect. Fixes: d05d15da ("s390/topology: delay initialization of topology cpumasks") Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
The toptree algorithm uses the physical core ids to create a mapping between cores and nodes (to_node_id array within emu_cores structure). The core ids are used as an index into an array which size depends on CONFIG_NR_CPUS. If the physical core ids are larger, this will result in out-of-bounds write accesses. Generate logical core ids instead to avoid this. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
The ptff() and clear_table() functions use the gcc extension "variable length arrays in structures" (VLAIS) to define in the inline assembler constraints the area of the clobbered memory. This extension will most likely never be supported by LLVM/Clang. Since currently BPF programs are compiled with LLVM, this leads to the following compile errors: $ cd samples/bpf $ make In file included from /root/linux-master/samples/bpf/tracex1_kern.c:8: In file included from ./include/linux/netdevice.h:44: ... In file included from ./arch/s390/include/asm/mmu_context.h:10: ./arch/s390/include/asm/pgalloc.h:30:24: error: fields must have a constant size: 'variable length array in structure' extension will never be supported typedef struct { char _[n]; } addrtype; In file included from /root/linux-master/samples/bpf/tracex1_kern.c:7: In file included from ./include/linux/skbuff.h:18: ... In file included from ./include/linux/jiffies.h:8: In file included from ./include/linux/timex.h:65: ./arch/s390/include/asm/timex.h:105:24: error: fields must have a constant size: 'variable length array in structure' extension will never be supported typedef struct { char _[len]; } addrtype; To fix this do the following: - Convert ptff() into a macro that then uses a fixed size array when expanded. - Convert the clear_table() function and use an inline assembly with fixed size array in a loop. The runtime performance of the new version is even better than the old version (tested with EC12/z13 and gcc 4.8.5/6.2.1 with "-march=z196 -O2"). Reported-by: NZvonko Kosic <zvonko.kosic@de.ibm.com> Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
For system damage machine checks or machine checks due to invalid PSW fields the system will be stopped. In order to get an oops message out before killing the system the machine check handler branches to .Lmcck_panic, switches to the panic stack and then does the usual machine check handling. The switch to the panic stack is incomplete, the stack pointer in %r15 is replaced, but the pt_regs pointer in %r11 is not. The result is a program check which will kill the system in a slightly different way. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-