This patch adds a proper prototype for acpi_processor_tstate_has_changed()
in include/acpi/processor.h
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

This is a SLIT sanity checking patch.  It moves slit_valid() function to
generic ACPI code and does sanity checking for both x86 and ia64.  It sets up
node_distance with LOCAL_DISTANCE and REMOTE_DISTANCE when hitting invalid
SLIT table on ia64.  It also cleans up unused variable localities in
acpi_parse_slit() on x86.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

When configuring the resources of an ACPI device, we first evaluate _CRS
to get a template of resource descriptors, then fill in the specific
resource values we want, and finally evaluate _SRS to actually configure
the device.

Some resources have optional fields, so the size of encoded descriptors
varies depending on the specific values.  For example, IRQ descriptors can
be either two or three bytes long.  The third byte contains triggering
information and can be omitted if the IRQ is edge-triggered and active
high.

The BIOS often assumes that IRQ descriptors in the _SRS buffer use the
same format as those in the _CRS buffer, so this patch enforces that
constraint.

The "Start Dependent Function" descriptor also has an optional byte, but
we don't currently encode those descriptors, so I didn't do anything for
those.

I have tested this patch on a Toshiba Portege 4000.  Without the patch,
parport_pc claims the parallel port only if I use "pnpacpi=off".  This
patch makes it work with PNPACPI.

This is an extension of a patch by Tom Jaeger:
    http://bugzilla.kernel.org/show_bug.cgi?id=9487#c42

References:
    http://bugzilla.kernel.org/show_bug.cgi?id=5832 Enabling ACPI Plug and Play in kernels >2.6.9 kills Parallel support
    http://bugzilla.kernel.org/show_bug.cgi?id=9487 buggy firmware expects four-byte IRQ resource descriptor (was: Serial port disappears after Suspend on Toshiba R25)
    http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=1d5b285da1893b90507b081664ac27f1a8a3dc5b related ACPICA fix
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

When we encode IRQ resources, we should use the "shareable" flag we got
from _PRS rather than guessing based on the IRQ trigger mode.

This is based on a patch by Tom Jaeger:
    http://bugzilla.kernel.org/show_bug.cgi?id=9487#c32Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

When decoding IRQ trigger mode and polarity, it is not enough to mask by
IORESOURCE_BITS because there are now additional bits defined.  For
example, if IORESOURCE_IRQ_SHAREABLE was set, we failed to set *triggering
and *polarity at all.

I can't point to a failure that this patch fixes, but
bugs in this area have caused problems when resuming after
suspend, for example:

    http://bugzilla.kernel.org/show_bug.cgi?id=6316
    http://bugzilla.kernel.org/show_bug.cgi?id=9487
    https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/152187

This is based on a patch by Tom Jaeger:
    http://bugzilla.kernel.org/show_bug.cgi?id=9487#c32

[rene.herman@keyaccess.nl: fix comment]
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch updates the location of the ACPI homepage in MAINTAINERS.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

As of recently (probably 2.6.26-rc1) I've been getting the following mangling
in the kernel log:

[4294014.568167] ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"<6>CPU0: Intel(R) Pentium(R) Dual  CPU  E2160  @ 1.80GHz stepping 0d

This is due to a missing newline character in the first message. The following
patch against 2.6.26-rc2 fixes it. Please apply.
Signed-off-by: NAlistair John Strachan <alistair@devzero.co.uk>
Signed-off-by: NLen Brown <len.brown@intel.com>

http://bugzilla.kernel.org/show_bug.cgi?id=10724Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

The less tested codepaths for LED handling, used on ThinkPads 570, 600e/x,
770e, 770x, A21e, A2xm/p, T20-22, X20 and maybe a few others, would write
data to kernel memory it had no business touching, for leds number 3 and
above.  If one is lucky, that illegal write would cause an OOPS, but
chances are it would silently corrupt a byte.

The problem was introduced in commit af116101, "ACPI: thinkpad-acpi: add
sysfs led class support to thinkpad leds (v3.2)".

Fix the bug by refactoring the entire code to be far more obvious on what
it wants to do.  Also do some defensive "constification".

Issue reported by Karol Lewandowski <lmctlx@gmail.com> (he's an lucky guy
and got an OOPS instead of silent corruption :-) ).

Root cause of the OOPS identified by Adrian Bunk <bunk@kernel.org>.
Thanks, Adrian!
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Tested-by: NKarol Lewandowski <lmctlx@gmail.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Rework some subdriver init and exit handlers, in order to fix some
initialization error paths that were missing, or broken.

Hitting those bugs should be extremely rare in the real world, but should
that happen, thinkpad-acpi would fail to dealocate some resources and a
reboot might well be needed to be able to load the driver again.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

Rename SW_RADIO to SW_RFKILL_ALL in thinkpad-acpi code and docs, following
5adad013 "Input: rename SW_RADIO to
SW_RFKILL_ALL".
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

cpuidle and acpi driver interaction bug with the way cpuidle_register_driver()
is called. Due to this bug, there will be oops on
AC<->DC on some systems, where they support C-states in one DC and not in AC.

The current code does
ON BOOT:
	Look at CST and other C-state info to see whether more than C1 is
	supported. If it is, then acpi processor_idle does a
	cpuidle_register_driver() call, which internally enables the device.

ON CST change notification (AC<->DC) and on suspend-resume:
	acpi driver temporarily disables device, updates the device with
	any new C-states, and reenables the device.

The problem is is on boot, there are no C2, C3 states supported and we skip
the register. Later on AC<->DC, we may get a CST notification and we try
to reevaluate CST and enabled the device, without actually registering it.
This causes breakage as we try to create /sys fs sub directory, without the
parent directory which is created at register time.

Thanks to Sanjeev for reporting the problem here.
http://bugzilla.kernel.org/show_bug.cgi?id=10394Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The Fixed_RTC event should be disabled when installing RTC handler.
Only when RTC alarm is set will it be enabled again. If it is not
disabled, maybe some machines will be powered on automatically after
the system is shutdown even when the RTC alarm is not set.

http://bugzilla.kernel.org/show_bug.cgi?id=10010Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  fix BLK_DEV_HD_ONLY on ARM dependencies
  ide: export ide_doubler
  palm_bk3710: add warm-plug support
  delkin_cb: add missing __init/__exit tags
  delkin_cb: add warm-plug support
  delkin_cb: use struct ide_port_info
  delkin_cb: set proper hwif->gendev.parent value
  ide: fix host drivers missing hwif->chipset initialization
  ide-generic: add missing hwif->chipset setup
  sis5513: add missing pci_enable_device() call
  MAINTAINERS: remove SIS 5513 IDE entry
  ide: remove the ide_etrax100 chipset type

This patch limits BLK_DEV_HD_ONLY to the ARM platforms offering 
IRQ_HARDDISK, fixing the following compile error on others:

<--  snip  -->

...
  CC      drivers/ide/legacy/hd.o
...
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'hd_times_out':
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: 'IRQ_HARDDISK' undeclared (first use in this function)
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: (Each undeclared identifier is reported only once
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: for each function it appears in.)
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'do_hd_request':
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:661: error: 'IRQ_HARDDISK' undeclared (first use in this function)
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'hd_init':
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:765: error: 'IRQ_HARDDISK' undeclared (first use in this function)
make[3]: *** [drivers/ide/legacy/hd.o] Error 1

<--  snip  -->
Reported-by: NAdrian Bunk <bunk@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This patch fixes the following build error:

<--  snip  -->

...
  Building modules, stage 2.
  MODPOST 1204 modules
ERROR: "ide_doubler" [drivers/ide/ide-core.ko] undefined!
...
make[2]: *** [__modpost] Error 1

<--  snip  -->
Reported-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Don't fail the probe if there are no devices attached to the controller.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Don't fail the probe if there are no devices attached to the controller.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Convert the driver to use struct ide_port_info - as a nice side-effect
this fixes racy setup of ->io_32bit/unmask settings (after ide_device_add()
call device can be already in use).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

hwif->dev was set too late (after ide_device_add() call)
so hwif->gendev.parent was not initialized properly.

Fix it by setting hw.dev and letting ide_init_port_hw()
do the rest.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_find_port() now depends on ->chipset being set for occupied ide_hwifs[]
slots so all host drivers have to initialize hwif->chipset properly.

This patch fixes a regression on hosts with > 1 port or with a single port
but no devices attached to it for an affected host drivers.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

hwif->chipset need to be set properly or ide-generic driver will break once
we make a final step in fixing host drivers' dependence on ide_hwifs[].

Problem was catched early thanks to IDE tree exposure in -mm / -next trees
and reported by people listed people (thank you guys!).
Reported-by: N"John Keller" <jpk@sgi.com>
Reported-by: NDmitri Vorobiev <dmitri.vorobiev@gmail.com>
Reported-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Cc: Riccardo Gori <goric@trivenet.it>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

- maintainer has not been active for years
- URLs no longer exist
- covered by the IDE SUBSYSTEM entry
- maintainer email bounces
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Lionel.Bouton@inet6.fr
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

I forgot to remove the ide_etrax100 chipset type when removing the
ETRAX_IDE driver.
Reported-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] tape_3590.c: introduce missing kfree
  [S390] Fix __ctl_load/__ctl_store inline assembly constraints
  [S390] Fix build failure in __cpu_up()
  [S390] vt220 console, initialize list head before use
  [S390] cio: Fix inverted isc priorities.
  [S390] vmemmap: fix off-by-one bug.
  [S390] cio: Fix sparse warnings in blacklist.c.
  [S390] sparsemem: use SPARSEMEM_STATIC if !64BIT.

Found a silly double assignment of err is do_shmat.  Silly, but good to
clean up the useless code.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

@r exists@
expression E,E1;
statement S;
position p1,p2,p3;
@@

E =@p1 \(kmalloc\|kcalloc\|kzalloc\)(...)
... when != E = E1
if (E == NULL || ...) S
... when != E = E1
if@p2 (...) {
 ... when != kfree(E)
 }
... when != E = E1
kfree@p3(E);

@forall@
position r.p2;
expression r.E;
int E1 != 0;
@@

* if@p2 (...) {
 ... when != kfree(E)
     when strict
return E1; }
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

__ctl_load/__ctl_store are called with either an array of unsigned long or
a single unsigned long value. Add an address operator to the "m"/"=m"
contraints to make them work for unsigned long arguments as well.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The first argument to __ctl_store() should be the array to store
stuff in, not just the first element of that array.  With the
current code in __cpu_up(), mainline GCC dies with an internal
compiler error.  I didn't diagnose that further, but just fixed
the kernel bug.
Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>

This patch fixes a null pointer dereference during initialisation when no
sclp event facility is available:
sclp vt220 tty driver: could not register vt220 - sclp_register returned -5
Unable to handle kernel paging request at virtual user address 0000000000000000
Oops: 0004 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 Not tainted 2.6.26-rc3-kvm-bigiron-00968-gd939e93-dirty #30
Process swapper (pid: 0, task: 0000000000600be0, ksp: 000000000064a000)
Krnl PSW : 0400000180000000 0000000000320d8c (sclp_unregister+0x48/0x8c)
           R:0 T:1 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:0 CC:0 PM:0 EA:3
Krnl GPRS: 0000000000000000 0000000000000000 0000000000630478 0700000000649c20
           0000000000000000 0000000000433060 000000000064a660 0000000002e26000
           00000000006db000 0000000000000000 0000000000a78578 0000000000649b80
           0000000000630dc0 000000000044fa20 0000000000320d76 0000000000649b80
Krnl Code: 0000000000320d7c: e310c0080004       lg      %r1,8(%r12)
           0000000000320d82: b9040032           lgr     %r3,%r2
           0000000000320d86: c02000187b79       larl    %r2,630478
          >0000000000320d8c: e34010000024       stg     %r4,0(%r1)
           0000000000320d92: e31040080024       stg     %r1,8(%r4)
           0000000000320d98: c01100200200       lgfi    %r1,2097664
           0000000000320d9e: e310c0080024       stg     %r1,8(%r12)
           0000000000320da4: c01100100100       lgfi    %r1,1048832
Call Trace:
([<0000000000320d76>] sclp_unregister+0x32/0x8c)
 [<00000000006657b4>] __sclp_vt220_cleanup+0xc4/0xe0
 [<000000000066595c>] __sclp_vt220_init+0x18c/0x1a0
 [<0000000000665aba>] sclp_vt220_con_init+0x42/0x68
 [<00000000006601ca>] console_init+0x4e/0x68
 [<000000000064acae>] start_kernel+0x3a2/0x4dc
 [<0000000000100020>] _stext+0x20/0x80
INFO: lockdep is turned off.
Last Breaking-Event-Address:
 [<000000000041f964>] _spin_lock_irqsave+0xb0/0xb4
 <4>---[ end trace 31fd0ba7d8756001 ]---

The issue is caused by a list_empty() check in __sclp_vt220_cleanup, which
usually fails on non-initialized list heads that contain {NULL,NULL} instead.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Priorities for I/O interruption subclasses range from 0 (highest)
to 7 (lowest). Unfortunately, the console has been using isc 7
instead of an isc with a higher priority than regular I/O
subchannels (which use 3). Fix this by making the console use
isc 1.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

If a memory range is supposed to be added to the 1:1 mapping and it
ends just below the maximum supported physical address it won't
succeed. This is because a test doesn't consider that the end address
is 1 smaller than start + size.
Fix the comparison.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

sparse complains about signedness:

drivers/s390/cio/blacklist.c:132:28: warning: incorrect type in
argument 2 (different signedness)
drivers/s390/cio/blacklist.c:132:28:    expected unsigned int *val
drivers/s390/cio/blacklist.c:132:28:    got int *cssid
drivers/s390/cio/blacklist.c:136:28: warning: incorrect type in
argument 2 (different signedness)
drivers/s390/cio/blacklist.c:136:28:    expected unsigned int *val
drivers/s390/cio/blacklist.c:136:28:    got int *ssid
drivers/s390/cio/blacklist.c:140:28: warning: incorrect type in
argument 2 (different signedness)
drivers/s390/cio/blacklist.c:140:28:    expected unsigned int *val
drivers/s390/cio/blacklist.c:140:28:    got int *devno

cssid, ssid and devno are of course unsigned, so let's make the
variables unsigned as well.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

In case of !64BIT kernel we end up with a zero sized mem_section array.
This happens because NR_MEM_SECTIONS is smaller than SECTIONS_PER_ROOT
but we have:

#define NR_SECTION_ROOTS (NR_MEM_SECTIONS / SECTIONS_PER_ROOT)

and

struct mem_section *mem_section[NR_SECTION_ROOTS];

So fix this by selecting SPARSEMEM_STATIC which makes sure
that SECTIONS_PER_ROOT is 1.

Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Cc: Michal Ostrowski <mostrows@earthlink.net>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/core: Remove IB_DEVICE_SEND_W_INV capability flag
  IB/umem: Avoid sign problems when demoting npages to integer

* git://git.infradead.org/users/cbou/battery-2.6.26:
  power_supply: Fix race in power_supply_uevent

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin serial driver: fix up tty core set_ldisc API change breakage bug
  Blackfin arch: protect only the SPI bus controller with CONFIG_SPI_BFIN
  Blackfin arch: fixup warnings with the new cplb saved values
  Blackfin Serial Driver: Clean up BF54x macro in blackfin UART driver.