Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Use strlcpy() to guarantee strings in i2c device type and driver_name
fields are 0-terminated.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

These functions are only called by __init functions.

WARNING: vmlinux.o(.text+0x56aa0): Section mismatch: reference to .init.text:.lmb_alloc (between '.iob_init' and '.iommu_init_early_pasemi')
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The functions are only called from __init functions.

WARNING: vmlinux.o(.text+0x45ed0): Section mismatch: reference to .init.text:.btext_find_display (between '.udbg_adb_init_early' and '.udbg_adb_init')
WARNING: vmlinux.o(.text+0x45f9c): Section mismatch: reference to .init.text:.btext_find_display (between '.udbg_adb_init' and '.udbg_adb_getc_poll')
WARNING: vmlinux.o(.text+0x46000): Section mismatch: reference to .init.text:.find_via_pmu (between '.udbg_adb_init' and '.udbg_adb_getc_poll')
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

These functions are only called from __init functions.

WARNING: vmlinux.o(.text+0x398f4): Section mismatch: reference to .init.text:.lmb_alloc (between '.iommu_init_early_dart' and '.pci_dma_bus_setup_dart')
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

WARNING: vmlinux.o(.text+0x23258): Section mismatch: reference to .init.text:.lmb_reserve (between '.reserve_kdump_trampoline' and '.restore_processor_state')
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

At present the cascade interrupt handler for the UIC (interrupt
controller on 4xx embedded chips) will misbehave badly if it is called
spuriously - that is if the handler is invoked when no interrupts are
asserted in the child UIC.

Although spurious interrupts shouldn't happen, it's good to behave
robustly if they do.  This patch does so by checking for and ignoring
spurious interrupts.
Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

At present the driver for the UIC (the embedded interrupt controller
in 4xx chips) uses the handle_level_irq() flow handler.  It turns out
this does not correctly handle level triggered interrupts on the UIC.

Specifically, acknowledging an irq on the UIC (i.e. clearing the
relevant bit in UIC_SR) will have no effect for a level interrupt
which is still asserted by the external device, even if the irq is
already masked.  Therefore, unlike handle_level_irq() we must ack the
interrupt after invoking the ISR (which should cause the device to
stop asserting the irq) instead of acking it when we mask it, before
the ISR.

This patch implements this change, in a new handle_uic_irq(), a
customised irq flow handler for the UIC.  For edge triggered
interrupts, handle_uic_irq() still uses the old flow - we must ack
edge triggered interrupt before the ISR not after, or we could miss a
second event which occurred between invoking the ISR and acking the
irq.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The UIC (interrupt controller in 4xx embedded CPUs) driver currently
missets the IRQ_lEVEL flag in desc->status, due to a thinko.  This
patch fixes the bug.

Currently this is only a cosmetic problem (affects the output in
/proc/interrupts), however subsequent patches will use the IRQ_LEVEL
flag to affect flow handling.
Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This removes some of the #ifdefs from .c files.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

They were only needed for backwards compatibility and all in tree uses
have now been changed.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

get_property has been renamed to of_get_property.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

arch/powerpc/mm/mmu_context_64.c: In function 'init_new_context':
arch/powerpc/mm/mmu_context_64.c:31: warning: unused variable 'new_context'
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This file was protected by _PPC64_LMB_H, which is confusing, as the
32-bit code also uses the lmb these days.  Changed to
_ASM_POWERPC_LMB_H.
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This fixes a typo in a printk message.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Instead, use asm() like all other atomic operations already do.

Also use inline functions instead of macros; this actually
improves code generation (some code becomes a little smaller,
probably because of improved alias information -- just a few
hundred bytes total on a default kernel build, nothing shocking).
Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This adds code to handle alignment traps generated by the following
new floating-point load/store instructions, by emulating the
instruction in the kernel (as is done for other instructions that
generate alignment traps):

lfiwax	load floating-point as integer word algebraic indexed
stfiwx	store floating-point as integer word indexed
lfdp	load floating-point double pair
lfdpx	load floating-point double pair indexed
stfdp	store floating-point double pair
stfdpx	store floating-point double pair indexed

All these except stfiwx are new in POWER6.

lfdp/lfdpx/stfdp/stfdpx load and store 16 bytes of memory into an
even/odd FP register pair.  In little-endian mode each 8-byte value is
byte-reversed separately (i.e. not as a 16-byte unit).  lfiwax/stfiwx
load or store the lower 4 bytes of a floating-point register from/to
memory; lfiwax sets the upper 4 bytes of the FP register to the sign
extension of the value loaded.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove dead code, and a misleading comment about EEH checking
for video devices.  The removed code is a left-over from the
olden days where there was concern over how video devices
worked in Linux. We are never going to go that way again,
so kill this.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/eeh.c |   17 -----------------
 1 file changed, 17 deletions(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The powermac pci configuration space write methods read the written
location immediately after the write is performed, presumably in order
to flush the write.  However, configuration space writes are not
allowed to be posted, making these reads gratuitous.  Furthermore,
this behavior potentially causes us to violate the PCI PM spec when
changing between e.g. D0 and D3 states, because a delay of up to 10ms
may be required before the OS accesses configuration space after the
write which initiates the transition.

Remove the unnecessary reads from macrisc_write_config,
u3_ht_write_config, and u4_pcie_write_config.
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The pasemi pci configuration space write method reads the written
location immediately after the write is performed, presumably in order
to flush the write.  However, configuration space writes are not
allowed to be posted, making these reads gratuitous.  Furthermore,
this behavior potentially causes us to violate the PCI PM spec when
changing between e.g. D0 and D3 states, because a delay of up to 10ms
may be required before the OS accesses configuration space after the
write which initiates the transition.

Remove the unnecessary reads from pa_pxp_write_config.
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NNathan Lynch <ntl@pobox.com>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The maple PCI configuration space write methods read the written
location immediately after the write is performed, presumably in order
to flush the write.  However, configuration space writes are not
allowed to be posted, making these reads gratuitous.  Furthermore,
this behavior potentially causes us to violate the PCI PM spec when
changing between e.g. D0 and D3 states, because a delay of up to 10ms
may be required before the OS accesses configuration space after the
write which initiates the transition.  It definitely causes a system
hang for me with a Broadcom 5721 PCIE network adapter, which is fixed
by this change.

Therefore this removes the gratuitous reads from u3_agp_write_config,
u3_ht_write_config, and u4_pcie_write_config.
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In order to compile drivers as modules that uses some of the
DCR functions, we need to export the symbols.  Example, EMAC
driver and other drivers that are under development use these
functions.
Signed-off-by: NMurali Iyer <mniyer@us.ibm.com>
Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Eliminate the use of error_log_cnt as a global var shared across
different directories.  Pass it as a parameter instead.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>

----

Respin of earlier patch, with the CONFIG_PSERIES junk removed from the
header file.

 arch/powerpc/kernel/nvram_64.c         |   10 +++++-----
 arch/powerpc/platforms/pseries/rtasd.c |    7 ++++---
 include/asm-powerpc/nvram.h            |    6 ++++--
 3 files changed, 13 insertions(+), 10 deletions(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Get rid of the jumbled usage of the no_logging flag. Its use
spans several directories, and is incorrectly/misleadingly
documented. Instead, two changes:
1) nvram will accept error log as soon as its ready.
2) logging to nvram stops on the first fatal error reported.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/kernel/nvram_64.c         |    8 --------
 arch/powerpc/platforms/pseries/rtasd.c |   14 ++++++--------
 2 files changed, 6 insertions(+), 16 deletions(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Forward declarations serve no purpose in this file.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>

----

 arch/powerpc/kernel/nvram_64.c |    5 -----
 1 file changed, 5 deletions(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Simplify rtasd initialization code; this also fixes a buglet,
where the /proc entries weren't being cleaned up in case of
failure.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/rtasd.c |   53 +++++++++++----------------------
 1 file changed, 19 insertions(+), 34 deletions(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The rtas_token() call does the same thing as this hand-rolled code.
This makes the code easier to read.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/rtasd.c |   13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We don't need to look up the rtas event token once per
cpu per second.  This avoids some misc device-tree lookups
and string ops and so provides some minor performance
improvement.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>

----
Revised commit-log message.

 arch/powerpc/platforms/pseries/rtasd.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>