Just use plain copy_from_user() and get_user().  Note that while a
buf-derived pointer gets stored into ->dxferp, all places that actually use
the resulting value feed it either to import_iovec() or to
import_single_range(), and both will do validation.

Link: https://lore.kernel.org/r/20191017193925.25539-7-viro@ZenIV.linux.org.ukSigned-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use copy_..._user() instead, both in sg_read() and in sg_read_oxfer().  And
don't open-code memdup_user()...

Link: https://lore.kernel.org/r/20191017193925.25539-6-viro@ZenIV.linux.org.ukSigned-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

... just use copy_from_user().  We copy only SZ_SG_IO_HDR bytes, so that
would, strictly speaking, loosen the check.  However, for call chains via
->write() the caller has actually checked the entire range and SG_IO passes
exactly SZ_SG_IO_HDR for count.  So no visible behaviour changes happen if
we check only what we really need for copyin.

Link: https://lore.kernel.org/r/20191017193925.25539-5-viro@ZenIV.linux.org.ukSigned-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We don't need to allocate a temporary buffer and read the entire structure
in it, only to fetch a single field and free what we'd allocated.  Just use
get_user() and be done with it...

Link: https://lore.kernel.org/r/20191017193925.25539-4-viro@ZenIV.linux.org.ukSigned-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/20191017193925.25539-3-viro@ZenIV.linux.org.ukSigned-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/20191017193925.25539-2-viro@ZenIV.linux.org.ukSigned-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

First of all, __put_user() can fail with access_ok() succeeding.  And
access_ok() + __copy_to_user() is spelled copy_to_user()...

__put_user() *can* fail with access_ok() succeeding...

Link: https://lore.kernel.org/r/20191017193925.25539-1-viro@ZenIV.linux.org.ukSigned-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The memory chunk io_req is released by mempool_free. Accessing
io_req->start_time will result in a use after free bug. The variable
start_time is a backup of the timestamp. So, use start_time here to
avoid use after free.

Link: https://lore.kernel.org/r/1572881182-37664-1-git-send-email-bianpan2016@163.comSigned-off-by: NPan Bian <bianpan2016@163.com>
Reviewed-by: NSatish Kharat <satishkh@cisco.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes an unintended sign extension on left shifts. From Colin
King: "Shifting a u8 left will cause the value to be promoted to an
integer. If the top bit of the u8 is set then the following conversion to
an u64 will sign extend the value causing the upper 32 bits to be set in
the result."

Fix this by using get_unaligned_be*() instead.

Fixes: bf816235 ("[SCSI] add scsi trace core functions and put trace points")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20191101211447.187151-1-bvanassche@acm.orgReported-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Only csio_hw_free() calling csio_dfs_destroy() and it is not checking
return value. So remove the return from csio_dfs_destroy().

Link: https://lore.kernel.org/r/20191028194234.GA27848@sauravSigned-off-by: NSaurav Girepunje <saurav.girepunje@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

debugfs_remove_recursive() has taken the null pointer into account.  Remove
the null check before debugfs_remove_recursive().

Link: https://lore.kernel.org/r/20191026195625.GA22455@sauravSigned-off-by: NSaurav Girepunje <saurav.girepunje@gmail.com>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Replace assignment of 0 to pointer with NULL assignment.

Link: https://lore.kernel.org/r/20191025135010.GA6191@sauravSigned-off-by: NSaurav Girepunje <saurav.girepunje@gmail.com>
Acked-by: NJack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

It isn't necessary to check the host depth in scsi_queue_rq() any more
since it has been respected by blk-mq before calling scsi_queue_rq() via
getting driver tag.

Lots of LUNs may attach to same host and per-host IOPS may reach millions,
so we should avoid expensive atomic operations on the host-wide counter in
the IO path.

This patch implements scsi_host_busy() via blk_mq_tagset_busy_iter() with
one scsi command state for reading the count of busy IOs for scsi_mq.

It is observed that IOPS is increased by 15% in IO test on scsi_debug (32
LUNs, 32 submit queues, 1024 can_queue, libaio/dio) in a dual-socket
system.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Omar Sandoval <osandov@fb.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20191025065855.6309-1-ming.lei@redhat.comSigned-off-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Declare all variables that hold dev_cmd_type values as an enum instead of
as an int.

Cc: Yaniv Gardi <ygardi@codeaurora.org>
Cc: Subhash Jadavani <subhashj@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191029230710.211926-3-bvanassche@acm.orgSigned-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix the following three kernel-doc warnings:

drivers/scsi/ufs/ufs_bsg.c:165: warning: Function parameter or member 'hba' not described in 'ufs_bsg_remove'
drivers/scsi/ufs/ufshcd.c:5789: warning: Function parameter or member 'cmd_type' not described in 'ufshcd_issue_devman_upiu_cmd'
drivers/scsi/ufs/ufshcd.c:5789: warning: Excess function parameter 'msgcode' description in 'ufshcd_issue_devman_upiu_cmd'

Cc: Yaniv Gardi <ygardi@codeaurora.org>
Cc: Subhash Jadavani <subhashj@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191029230710.211926-2-bvanassche@acm.orgSigned-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There is no need to call ufshcd_def_desc_sizes() in ufshcd_init(), since
descriptor lengths will be checked and initialized later in
ufshcd_init_desc_sizes().

Fixes: a4b0e8a4(scsi: ufs: Factor out ufshcd_read_desc_param)
Link: https://lore.kernel.org/r/BN7PR08MB5684A3ACE214C3D4792CE729DB610@BN7PR08MB5684.namprd08.prod.outlook.comSigned-off-by: NBean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman.wdc.com>
Reviewed-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

While v2.6.26 commit b75db731 ("[SCSI] zfcp: Add qtcb dump to hba debug
trace") is right that we don't want to flood the (payload) trace ring
buffer, we don't trace successful FCP command responses by default.  So we
can include the channel log for problem determination with failed responses
of any FSF request type.

Fixes: b75db731 ("[SCSI] zfcp: Add qtcb dump to hba debug trace")
Fixes: a54ca0f6 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
Cc: <stable@vger.kernel.org> #2.6.38+
Link: https://lore.kernel.org/r/e37597b5c4ae123aaa85fd86c23a9f71e994e4a9.1572018132.git.bblock@linux.ibm.comReviewed-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NSteffen Maier <maier@linux.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

No functional change.

The unary not operator only applies to the sub expression before the
logical or. So we return early if (not running) or failed.

Link: https://lore.kernel.org/r/df4f897f6e83eaa528465d0858d5a22daac47a2f.1572018132.git.bblock@linux.ibm.comReviewed-by: NJens Remus <jremus@linux.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NSteffen Maier <maier@linux.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Replace the static define (ZFCP_DIAG_MAX_AGE) with a per-adapter variable
(${adapter}->diagnostics->max_age). This new variable is exported via
sysfs, along with other, already existing adapter variables, and can both
be read and written. This way users can choose how much time should pass
between refreshes of diagnostic buffers. The default value for the age
remains to be five seconds.

By setting this new variable to 0, the caching of diagnostic buffers for
userspace accesses can also be completely removed.

All diagnostic buffers of a given adapter are subject to this setting in
the same way.

Link: https://lore.kernel.org/r/b1d0977cc884b16dd4ca6418e4320c56a4c31d63.1572018132.git.bblock@linux.ibm.comReviewed-by: NSteffen Maier <maier@linux.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Adds implicit updates of cached diagnostics via Exchange Config Data when
reading sysfs attributes interfacing them. Right now this only affects the
new B2B-Credit diagnostic attribute.

This uses the same mechanism previously also used for cached diagnostics
of Exchange Port Data.

Link: https://lore.kernel.org/r/60a94f55f2630b74b468fed5f39880208abb2679.1572018132.git.bblock@linux.ibm.comReviewed-by: NSteffen Maier <maier@linux.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In addition to the diagnostic data from the local SFP transceiver this
patch adds an interface to read the advertised buffer-to-buffer credit from
the local FC_Port.

With this patch the userspace-interface will only read data stored in the
corresponding "diagnostic buffer" (that was stored during completion of a
previous Exchange Config Data command). Implicit updating will follow later
in this series.

Link: https://lore.kernel.org/r/8a53aef87b53c50cfb1a3425b799bacb6f82b832.1572018132.git.bblock@linux.ibm.comReviewed-by: NSteffen Maier <maier@linux.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds implicit updates to the sysfs entries that read the
diagnostic data stored in the "caching buffer" for Exchange Port Data.

An update is triggered once the buffer is older than ZFCP_DIAG_MAX_AGE
milliseconds (5s). This entails sending an Exchange Port Data command to
the FCP-Channel, and during its ingress path updating the cached data and
the timestamp. To prevent multiple concurrent userspace-applications from
triggering this update in parallel we synchronize all of them using a
wait-queue (waiting threads are interruptible; the updating thread is not).

Link: https://lore.kernel.org/r/c145b5cfc99a63b6a018b1184fbd27bb09c955f5.1572018132.git.bblock@linux.ibm.comReviewed-by: NSteffen Maier <maier@linux.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This adds an interface to read the diagnostics of the local SFP transceiver
of an FCP-Channel from userspace. This comes in the form of new sysfs
entries that are attached to the CCW device representing the FCP
device. Each type of data gets its own sysfs entry; the whole collection of
entries is pooled into a new child-directory of the CCW device node:
"diagnostics".

Adds sysfs entries for:
 * sfp_invalid:    boolean value evaluating to whether the following 5
                   fields are invalid; {0, 1}; 1 - invalid
 * temperature:    transceiver temp.; unit 1/256°C;
                   range [-128°C, +128°C]
 * vcc:            supply voltage; unit 100μV; range [0, 6.55V]
 * tx_bias:        transmitter laser bias current; unit 2μA;
                   range [0, 131mA]
 * tx_power:       coupled TX output power; unit 0.1μW; range [0, 6.5mW]
 * rx_power:       received optical power; unit 0.1μW; range [0, 6.5mW]

 * optical_port:   boolean value evaluating to whether the FCP-Channel has
                   an optical port; {0, 1}; 1 - optical
 * fec_active:     boolean value evaluating to whether 16G FEC is active;
                   {0, 1}; 1 - active
 * port_tx_type:   nibble describing the port type; {0, 1, 2, 3};
                   0 - unknown,             1 - short wave,
                   2 - long wave LC 1310nm, 3 - long wave LL 1550nm
 * connector_type: two bits describing the connector type; {0, 1};
                   0 - unknown,             1 - SFP+

This is only supported if the FCP-Channel in turn supports reporting the
SFP Diagnostic Data, otherwise read() on these new entries will return
EOPNOTSUPP (this affects only adapters older than FICON Express8S, on
Mainframe generations older than z14). Other possible errors for read()
include ENOLINK, ENODEV and ENOMEM.

With this patch the userspace-interface will only read data stored in
the corresponding "diagnostic buffer" (that was stored during completion
of an previous Exchange Port Data command). Implicit updating will
follow later in this series.

Link: https://lore.kernel.org/r/1f9cce7c829c881e7d71a3f10c5b57f3dd84ab32.1572018132.git.bblock@linux.ibm.comReviewed-by: NSteffen Maier <maier@linux.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

A new FCP channel feature allows us to read the diagnostics from our local
SFP transceivers. To make use of that add a flag
(FSF_FEATURE_REQUEST_SFP_DATA) to the feature-set we request from the FCP
channel. Whether the channel actually implements this can be determined via
an other new flag (FSF_FEATURE_REPORT_SFP_DATA), that is set in the
adapter_features field of the adapter structure after Exchange Config Data
finished.

Also add the corresponding definitions in the QTCB Bottom for Exchange Port
Data. These new definitions are only valid, if FSF_FEATURE_REPORT_SFP_DATA
is set.

Link: https://lore.kernel.org/r/ee1eba4de71eb06b4d82207ad4f428429346156f.1572018132.git.bblock@linux.ibm.comReviewed-by: NSteffen Maier <maier@linux.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In the same vein as the previous patch, add diagnostic data capture for the
Exchange Config Data command.

Link: https://lore.kernel.org/r/7d8ac0a6cad403fa8f8b888693476a84e80a277b.1572018131.git.bblock@linux.ibm.comReviewed-by: NSteffen Maier <maier@linux.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The FCP channel exposes two central interfaces to receive information about
the local FCP-Adapter/-Port: Exchange Port and Exchange Config Data. Using
these commands can negatively impact the adapter if we allow them to be
sent at a very high rate.

The later parts of this patchset will introduce new user-interfaces to
receive more diagnostics from the adapter. To prevent any negative impact
from using those, this patch adds a simple caching-mechanism that will
prevent a malicious/faulty userspace-application from generating an
abnormal high amount of Exchange Port/Config Data traffic.

Relevant diagnostic data that is received via Exchange Config/Port Data is
cached in buffers associated with the corresponding adapter-struct.  Each
buffer is associated with a timestamp that signals how old the data is,
and, added via a following patch in this series, lets userspace-interfaces
determine when the data is too old and needs to be updated.

Buffer-updates are made during the normal response path of the
corresponding command. With this patch only the output of the Exchange Port
Data command is captured.

Link: https://lore.kernel.org/r/054ca020ce0a53dc0d9176428bea373898944e6a.1572018130.git.bblock@linux.ibm.comReviewed-by: NSteffen Maier <maier@linux.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Adds a new FSF-Request status flag (ZFCP_STATUS_FSFREQ_XDATAINCOMPLETE)
that signal that the data received using Exchange Config Data or Exchange
Port Data was incomplete. This new flags is set in the respective handlers
during the response path.

With this patch, only the synchronous FSF-functions for each command got
support for the new flag, otherwise it is transparent.

Together with this new flag and already existing status flags the
synchronous FSF-functions are extended to now detect whether the received
data is complete, incomplete or completely invalid (this includes cases
where a command ran into a timeout). This is now signaled back to the
caller, where previously only failures on the request path would result in
a bad return-code.

For complete data the return-code remains 0. For incomplete data a new
return-code -EAGAIN is added to the function-interface. For completely
invalid data the already existing return-code -EIO is reused - formerly
this was used to signal failures on the request path.

Existing callers of the FSF-functions are adjusted so that they behave as
before for return-code 0 and -EAGAIN, to not change the user-interface. As
-EIO existed all along, it was already exposed to the user - and needed
handling - and will now also be exposed in this new special case.

Link: https://lore.kernel.org/r/e14f0702fa2b00a4d1f37c7981a13f2dd1ea2c83.1572018130.git.bblock@linux.ibm.comReviewed-by: NSteffen Maier <maier@linux.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix sparse warning:

drivers/scsi/lpfc/lpfc_debugfs.c:2083:1: warning:
 symbol 'lpfc_debugfs_ras_log_data' was not declared. Should it be static?

Link: https://lore.kernel.org/r/20191028132556.16272-1-yuehaibing@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

mempool_destroy has taken null pointer check into account. Remove the
redundant check.

Link: https://lore.kernel.org/r/20191026194712.GA22249@sauravSigned-off-by: NSaurav Girepunje <saurav.girepunje@gmail.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

convert MAGIC_NUMER_xxx to MAGIC_NUMBER_xxx

Link: https://lore.kernel.org/r/20191025184342.6623-1-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

lpfc_debufs.c was missing include of vmalloc.h when compiled on PPC.

Add missing header.

Link: https://lore.kernel.org/r/20191025182530.26653-1-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The number of phy down reflects the quality of the link between SAS
controller and disk. In order to allow the user to confirm the link quality
of the system, we record the number of phy down for each phy.

The user can check the current phy down count by reading the debugfs file
corresponding to the specific phy, or clear the phy down count by writing 0
to the debugfs file.

Link: https://lore.kernel.org/r/1571926105-74636-19-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Although if the debugfs initialization fails, we will delete the debugfs
folder of hisi_sas, but we did not consider the scenario where debugfs was
successfully initialized, but the probe failed for other reasons. We found
out that hisi_sas folder is still remain after the probe failed.

When probe fail, we should delete debugfs folder to avoid the above issue.

Link: https://lore.kernel.org/r/1571926105-74636-18-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We use the module parameter debugfs_dump_count to manage the upper limit of
the memory block for multiple dumps.

Link: https://lore.kernel.org/r/1571926105-74636-17-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We still only use dump index #0 however.

Link: https://lore.kernel.org/r/1571926105-74636-16-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We add multiple dumps for debugfs, but only allocate memory this time and
only dump #0.

Link: https://lore.kernel.org/r/1571926105-74636-15-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Create a file structure which was used to save the memory address for
ITCT cache at debugfs. This structure is bound to the corresponding debugfs
file, it can help callback function of debugfs file to get what it needs.

Link: https://lore.kernel.org/r/1571926105-74636-14-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Create a file structure which was used to save the memory address for IOST
cache at debugfs. This structure is bound to the corresponding debugfs
file, it can help callback function of debugfs file to get what it needs.

Link: https://lore.kernel.org/r/1571926105-74636-13-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Create a file structure which was used to save the memory address for ITCT
at debugfs. This structure is bound to the corresponding debugfs file, it
can help callback function of debugfs file to get what it needs.

Link: https://lore.kernel.org/r/1571926105-74636-12-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Create a file structure which was used to save the memory address for IOST
at debugfs. This structure is bound to the corresponding debugfs file, it
can help callback function of debugfs file to get what it needs.

Link: https://lore.kernel.org/r/1571926105-74636-11-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>