1. 26 5月, 2017 8 次提交
  2. 21 5月, 2017 2 次提交
  3. 18 5月, 2017 2 次提交
  4. 14 5月, 2017 2 次提交
  5. 13 5月, 2017 3 次提交
    • R
      dax: prevent invalidation of mapped DAX entries · 4636e70b
      Ross Zwisler 提交于
      Patch series "mm,dax: Fix data corruption due to mmap inconsistency",
      v4.
      
      This series fixes data corruption that can happen for DAX mounts when
      page faults race with write(2) and as a result page tables get out of
      sync with block mappings in the filesystem and thus data seen through
      mmap is different from data seen through read(2).
      
      The series passes testing with t_mmap_stale test program from Ross and
      also other mmap related tests on DAX filesystem.
      
      This patch (of 4):
      
      dax_invalidate_mapping_entry() currently removes DAX exceptional entries
      only if they are clean and unlocked.  This is done via:
      
        invalidate_mapping_pages()
          invalidate_exceptional_entry()
            dax_invalidate_mapping_entry()
      
      However, for page cache pages removed in invalidate_mapping_pages()
      there is an additional criteria which is that the page must not be
      mapped.  This is noted in the comments above invalidate_mapping_pages()
      and is checked in invalidate_inode_page().
      
      For DAX entries this means that we can can end up in a situation where a
      DAX exceptional entry, either a huge zero page or a regular DAX entry,
      could end up mapped but without an associated radix tree entry.  This is
      inconsistent with the rest of the DAX code and with what happens in the
      page cache case.
      
      We aren't able to unmap the DAX exceptional entry because according to
      its comments invalidate_mapping_pages() isn't allowed to block, and
      unmap_mapping_range() takes a write lock on the mapping->i_mmap_rwsem.
      
      Since we essentially never have unmapped DAX entries to evict from the
      radix tree, just remove dax_invalidate_mapping_entry().
      
      Fixes: c6dcf52c ("mm: Invalidate DAX radix tree entries only if appropriate")
      Link: http://lkml.kernel.org/r/20170510085419.27601-2-jack@suse.czSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
      Signed-off-by: NJan Kara <jack@suse.cz>
      Reported-by: NJan Kara <jack@suse.cz>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: <stable@vger.kernel.org>    [4.10+]
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4636e70b
    • M
      mm, vmalloc: fix vmalloc users tracking properly · 8594a21c
      Michal Hocko 提交于
      Commit 1f5307b1 ("mm, vmalloc: properly track vmalloc users") has
      pulled asm/pgtable.h include dependency to linux/vmalloc.h and that
      turned out to be a bad idea for some architectures.  E.g.  m68k fails
      with
      
         In file included from arch/m68k/include/asm/pgtable_mm.h:145:0,
                          from arch/m68k/include/asm/pgtable.h:4,
                          from include/linux/vmalloc.h:9,
                          from arch/m68k/kernel/module.c:9:
         arch/m68k/include/asm/mcf_pgtable.h: In function 'nocache_page':
      >> arch/m68k/include/asm/mcf_pgtable.h:339:43: error: 'init_mm' undeclared (first use in this function)
          #define pgd_offset_k(address) pgd_offset(&init_mm, address)
      
      as spotted by kernel build bot. nios2 fails for other reason
      
        In file included from include/asm-generic/io.h:767:0,
                         from arch/nios2/include/asm/io.h:61,
                         from include/linux/io.h:25,
                         from arch/nios2/include/asm/pgtable.h:18,
                         from include/linux/mm.h:70,
                         from include/linux/pid_namespace.h:6,
                         from include/linux/ptrace.h:9,
                         from arch/nios2/include/uapi/asm/elf.h:23,
                         from arch/nios2/include/asm/elf.h:22,
                         from include/linux/elf.h:4,
                         from include/linux/module.h:15,
                         from init/main.c:16:
        include/linux/vmalloc.h: In function '__vmalloc_node_flags':
        include/linux/vmalloc.h:99:40: error: 'PAGE_KERNEL' undeclared (first use in this function); did you mean 'GFP_KERNEL'?
      
      which is due to the newly added #include <asm/pgtable.h>, which on nios2
      includes <linux/io.h> and thus <asm/io.h> and <asm-generic/io.h> which
      again includes <linux/vmalloc.h>.
      
      Tweaking that around just turns out a bigger headache than necessary.
      This patch reverts 1f5307b1 and reimplements the original fix in a
      different way.  __vmalloc_node_flags can stay static inline which will
      cover vmalloc* functions.  We only have one external user
      (kvmalloc_node) and we can export __vmalloc_node_flags_caller and
      provide the caller directly.  This is much simpler and it doesn't really
      need any games with header files.
      
      [akpm@linux-foundation.org: coding-style fixes]
      [mhocko@kernel.org: revert old comment]
        Link: http://lkml.kernel.org/r/20170509211054.GB16325@dhcp22.suse.cz
      Fixes: 1f5307b1 ("mm, vmalloc: properly track vmalloc users")
      Link: http://lkml.kernel.org/r/20170509153702.GR6481@dhcp22.suse.czSigned-off-by: NMichal Hocko <mhocko@suse.com>
      Cc: Tobias Klauser <tklauser@distanz.ch>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8594a21c
    • D
      time: delete current_fs_time() · 572e0ca9
      Deepa Dinamani 提交于
      All uses of the current_fs_time() function have been replaced by other
      time interfaces.
      
      And, its use cases can be fulfilled by current_time() or ktime_get_*
      variants.
      
      Link: http://lkml.kernel.org/r/1491613030-11599-13-git-send-email-deepa.kernel@gmail.comSigned-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
      Reviewed-by: NArnd Bergmann <arnd@arndb.de>
      Cc: John Stultz <john.stultz@linaro.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      572e0ca9
  6. 12 5月, 2017 3 次提交
    • D
      xdp: refine xdp api with regards to generic xdp · d67b9cd2
      Daniel Borkmann 提交于
      While working on the iproute2 generic XDP frontend, I noticed that
      as of right now it's possible to have native *and* generic XDP
      programs loaded both at the same time for the case when a driver
      supports native XDP.
      
      The intended model for generic XDP from b5cdae32 ("net: Generic
      XDP") is, however, that only one out of the two can be present at
      once which is also indicated as such in the XDP netlink dump part.
      The main rationale for generic XDP is to ease accessibility (in
      case a driver does not yet have XDP support) and to generically
      provide a semantical model as an example for driver developers
      wanting to add XDP support. The generic XDP option for an XDP
      aware driver can still be useful for comparing and testing both
      implementations.
      
      However, it is not intended to have a second XDP processing stage
      or layer with exactly the same functionality of the first native
      stage. Only reason could be to have a partial fallback for future
      XDP features that are not supported yet in the native implementation
      and we probably also shouldn't strive for such fallback and instead
      encourage native feature support in the first place. Given there's
      currently no such fallback issue or use case, lets not go there yet
      if we don't need to.
      
      Therefore, change semantics for loading XDP and bail out if the
      user tries to load a generic XDP program when a native one is
      present and vice versa. Another alternative to bailing out would
      be to handle the transition from one flavor to another gracefully,
      but that would require to bring the device down, exchange both
      types of programs, and bring it up again in order to avoid a tiny
      window where a packet could hit both hooks. Given this complicates
      the logic for just a debugging feature in the native case, I went
      with the simpler variant.
      
      For the dump, remove IFLA_XDP_FLAGS that was added with b5cdae32
      and reuse IFLA_XDP_ATTACHED for indicating the mode. Dumping all
      or just a subset of flags that were used for loading the XDP prog
      is suboptimal in the long run since not all flags are useful for
      dumping and if we start to reuse the same flag definitions for
      load and dump, then we'll waste bit space. What we really just
      want is to dump the mode for now.
      
      Current IFLA_XDP_ATTACHED semantics are: nothing was installed (0),
      a program is running at the native driver layer (1). Thus, add a
      mode that says that a program is running at generic XDP layer (2).
      Applications will handle this fine in that older binaries will
      just indicate that something is attached at XDP layer, effectively
      this is similar to IFLA_XDP_FLAGS attr that we would have had
      modulo the redundancy.
      Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: NAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d67b9cd2
    • D
      bpf: Add strict alignment flag for BPF_PROG_LOAD. · e07b98d9
      David S. Miller 提交于
      Add a new field, "prog_flags", and an initial flag value
      BPF_F_STRICT_ALIGNMENT.
      
      When set, the verifier will enforce strict pointer alignment
      regardless of the setting of CONFIG_EFFICIENT_UNALIGNED_ACCESS.
      
      The verifier, in this mode, will also use a fixed value of "2" in
      place of NET_IP_ALIGN.
      
      This facilitates test cases that will exercise and validate this part
      of the verifier even when run on architectures where alignment doesn't
      matter.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
      e07b98d9
    • D
      bpf: Track alignment of register values in the verifier. · d1174416
      David S. Miller 提交于
      Currently if we add only constant values to pointers we can fully
      validate the alignment, and properly check if we need to reject the
      program on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures.
      
      However, once an unknown value is introduced we only allow byte sized
      memory accesses which is too restrictive.
      
      Add logic to track the known minimum alignment of register values,
      and propagate this state into registers containing pointers.
      
      The most common paradigm that makes use of this new logic is computing
      the transport header using the IP header length field.  For example:
      
      	struct ethhdr *ep = skb->data;
      	struct iphdr *iph = (struct iphdr *) (ep + 1);
      	struct tcphdr *th;
       ...
      	n = iph->ihl;
      	th = ((void *)iph + (n * 4));
      	port = th->dest;
      
      The existing code will reject the load of th->dest because it cannot
      validate that the alignment is at least 2 once "n * 4" is added the
      the packet pointer.
      
      In the new code, the register holding "n * 4" will have a reg->min_align
      value of 4, because any value multiplied by 4 will be at least 4 byte
      aligned.  (actually, the eBPF code emitted by the compiler in this case
      is most likely to use a shift left by 2, but the end result is identical)
      
      At the critical addition:
      
      	th = ((void *)iph + (n * 4));
      
      The register holding 'th' will start with reg->off value of 14.  The
      pointer addition will transform that reg into something that looks like:
      
      	reg->aux_off = 14
      	reg->aux_off_align = 4
      
      Next, the verifier will look at the th->dest load, and it will see
      a load offset of 2, and first check:
      
      	if (reg->aux_off_align % size)
      
      which will pass because aux_off_align is 4.  reg_off will be computed:
      
      	reg_off = reg->off;
       ...
      		reg_off += reg->aux_off;
      
      plus we have off==2, and it will thus check:
      
      	if ((NET_IP_ALIGN + reg_off + off) % size != 0)
      
      which evaluates to:
      
      	if ((NET_IP_ALIGN + 14 + 2) % size != 0)
      
      On strict alignment architectures, NET_IP_ALIGN is 2, thus:
      
      	if ((2 + 14 + 2) % size != 0)
      
      which passes.
      
      These pointer transformations and checks work regardless of whether
      the constant offset or the variable with known alignment is added
      first to the pointer register.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
      d1174416
  7. 11 5月, 2017 2 次提交
    • R
      Partially Revert "of: fix sparse warnings in fdt, irq, reserved mem, and resolver code" · df3ed932
      Rob Herring 提交于
      A change to function pointers that was meant to address a sparse warning
      turned out to cause hundreds of new gcc-7 warnings:
      
      include/linux/of_irq.h:11:13: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
      drivers/of/of_reserved_mem.c: In function '__reserved_mem_init_node':
      drivers/of/of_reserved_mem.c:200:7: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
         int const (*initfn)(struct reserved_mem *rmem) = i->data;
      
      Turns out the sparse warnings were spurious and have been fixed in
      upstream sparse since 0.5.0 in commit "sparse: treat function pointers
      as pointers to const data".
      
      This partially reverts commit 17a70355.
      
      Fixes: 17a70355 ("of: fix sparse warnings in fdt, irq, reserved mem, and resolver code")
      Reported-by: NArnd Bergmann <arnd@arndb.de>
      Signed-off-by: NRob Herring <robh@kernel.org>
      df3ed932
    • V
      libnvdimm: add an atomic vs process context flag to rw_bytes · 3ae3d67b
      Vishal Verma 提交于
      nsio_rw_bytes can clear media errors, but this cannot be done while we
      are in an atomic context due to locking within ACPI. From the BTT,
      ->rw_bytes may be called either from atomic or process context depending
      on whether the calls happen during initialization or during IO.
      
      During init, we want to ensure error clearing happens, and the flag
      marking process context allows nsio_rw_bytes to do that. When called
      during IO, we're in atomic context, and error clearing can be skipped.
      
      Cc: Dan Williams <dan.j.williams@intel.com>
      Signed-off-by: NVishal Verma <vishal.l.verma@intel.com>
      Signed-off-by: NDan Williams <dan.j.williams@intel.com>
      3ae3d67b
  8. 09 5月, 2017 18 次提交