In case nvme_alloc_ns fails after we initialize ns_head but before we
add the ns to the controller namespaces list we need to explicitly put
the ns_head reference because when we teardown the controller we
won't find it, causing us to leak a dangling subsystem eventually.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The field is defined to be a 24 byte array, we don't need to multiply
the sizeof() that field by the number of dwords it covers.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A write or flush IO passthrough command is expected to change the
logical block content, so don't warn on these as no additional handling
is necessary.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This will print get-feature cmd in more informative way. For example,
run "nvme get-feature /dev/nvme0 -n 1 -f 0x9 -c 10" will trace:

 nvme-3907  [008] ....  1763.635054: nvme_setup_cmd: nvme0: qid=0, cmdid=6, nsid=1, flags=0x0, meta=0x0, cmd=(nvme_admin_get_features fid=0x9 sel=0x0 cdw11=0xa)
<idle>-0     [001] d.h.  1763.635112: nvme_sq: nvme0: qid=0, head=27, tail=27
<idle>-0     [008] ..s.  1763.635121: nvme_complete_rq: nvme0: qid=0, cmdid=6, res=10, retries=0, flags=0x2, status=0
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull MD fixes from Song.

* 'for-5.1/md-post' of https://github.com/liu-song-6/linux:
  md: Fix failed allocation of md_register_thread
  It's wrong to add len to sector_nr in raid10 reshape twice
  raid5: set write hint for PPL

mddev->sync_thread can be set to NULL on kzalloc failure downstream.
The patch checks for such a scenario and frees allocated resources.

Committer node:

Added similar fix to raid5.c, as suggested by Guoqing.

Cc: stable@vger.kernel.org # v3.16+
Acked-by: NGuoqing Jiang <gqjiang@suse.com>
Signed-off-by: NAditya Pakki <pakki001@umn.edu>
Signed-off-by: NSong Liu <songliubraving@fb.com>

In reshape_request it already adds len to sector_nr already. It's wrong to add len to
sector_nr again after adding pages to bio. If there is bad block it can't copy one chunk
at a time, it needs to goto read_more. Now the sector_nr is wrong. It can cause data
corruption.

Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: NXiao Ni <xni@redhat.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>

When the Partial Parity Log is enabled, circular buffer is used to store
PPL data. Each write to RAID device causes overwrite of data in this buffer
so some write_hint can be set to those request to help drives handle
garbage collection. This patch adds new sysfs attribute which can be used
to specify which write_hint should be assigned to PPL.
Acked-by: NGuoqing Jiang <gqjiang@suse.com>
Signed-off-by: NMariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>

When calculating the maximun I/O size allowed into the buffer, consider
the write size (ws_opt) used by the write thread in order to cover the
case in which, due to flushes, the mem and subm pointers are disaligned
by (ws_opt - 1). This case currently translates into a stall when
an I/O of the largest possible size is submitted.

Fixes: f9f9d1ae2c66 ("lightnvm: pblk: prevent stall due to wb threshold")
Signed-off-by: NJavier González <javier@javigon.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blk_recount_segments() can be called in bio_add_pc_page() for
calculating how many segments this bio will has after one page is added
to this bio. If the resulted segment number is beyond the queue limit,
the added page will be removed.

The try-and-fix policy requires blk_recount_segments(__blk_recalc_rq_segments)
to not consider the segment number limit. Unfortunately bvec_split_segs()
does check this limit, and causes small segment number returned to
bio_add_pc_page(), then page still may be added to the bio even though
segment number limit becomes broken.

Fixes this issue by not considering segment number limit when calcualting
bio's segment number.

Fixes: dcebd755 ("block: use bio_for_each_bvec() to compute multi-page bvec count")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Merge branch 'stable/for-jens-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-5.1/block-post

Pull two xen blkback fixes from Konrad.

* 'stable/for-jens-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/blkback: rework connect_ring() to avoid inconsistent xenstore 'ring-page-order' set by malicious blkfront
  xen/blkback: add stack variable 'blkif' in connect_ring()

When the current bvec can be merged to the 1st segment, the bio's front
segment size has to be updated.

However, dcebd755 doesn't consider that case, then bio's front
segment size may not be correct.

This patch fixes this issue.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Omar Sandoval <osandov@fb.com>
Fixes: dcebd755 ("block: use bio_for_each_bvec() to compute multi-page bvec count")
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Replace hard coded function name register_blkdev with __func__, to
improve robustness and to conform to the Linux kernel coding
style. Issue found using checkpatch.
Signed-off-by: NKeyur Patel <iamkeyur96@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

genlmsg_reply can fail, so propagate its return code
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/block/floppy.c: In function 'request_done':
drivers/block/floppy.c:2233:24: warning:
 variable 'q' set but not used [-Wunused-but-set-variable]

It's never used and can be removed.
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

null_handle_bio() erroneously uses the bio_op macro
which masks respective request flag bits including REQ_FUA
out thus failing the check.

Fix by checking bio->bi_opf directly.
Signed-off-by: NHeinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If __device_add_disk-->bdi_register_owner-->bdi_register-->
bdi_register_va-->device_create_vargs fails, bdi->dev is still
NULL, __device_add_disk-->register_disk will visit bdi->dev->kobj.
This patch fixes that.
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

guard_bio_eod() can truncate a segment in bio to allow it to do IO on
odd last sectors of a device.

It already checks if the IO starts past EOD, but it does not consider
the possibility of an IO request starting within device boundaries can
contain more than one segment past EOD.

In such cases, truncated_bytes can be bigger than PAGE_SIZE, and will
underflow bvec->bv_len.

Fix this by checking if truncated_bytes is lower than PAGE_SIZE.

This situation has been found on filesystems such as isofs and vfat,
which doesn't check the device size before mount, if the device is
smaller than the filesystem itself, a readahead on such filesystem,
which spans EOD, can trigger this situation, leading a call to
zero_user() with a wrong size possibly corrupting memory.

I didn't see any crash, or didn't let the system run long enough to
check if memory corruption will be hit somewhere, but adding
instrumentation to guard_bio_end() to check truncated_bytes size, was
enough to see the error.

The following script can trigger the error.

MNT=/mnt
IMG=./DISK.img
DEV=/dev/loop0

mkfs.vfat $IMG
mount $IMG $MNT
cp -R /etc $MNT &> /dev/null
umount $MNT

losetup -D

losetup --find --show --sizelimit 16247280 $IMG
mount $DEV $MNT

find $MNT -type f -exec cat {} + >/dev/null

Kudos to Eric Sandeen for coming up with the reproducer above
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NCarlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Replace set->map[0] with set->map[HCTX_TYPE_DEFAULT] to avoid hardcoding.
Signed-off-by: NDongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There is no need to only iterate in chunks of PAGE_SIZE or less in
bvec_iter_advance, given that the callers pass in the chunk length that
they are operating on - either that already is less than PAGE_SIZE
because they do classic page-based iteration, or it is larger because
the caller operates on multi-page bvecs.

This should help shaving off a few cycles of the I/O hot path.
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

mp_bvec_for_each_segment() is a bit big for the iteration, so introduce
a light-weight helper for iterating over pages, then 32bytes stack
space can be saved.
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Introduce a fast path for single-page bvec IO, then we can avoid
to call bvec_split_segs() unnecessarily.
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Introduce a fast path for single-page bvec IO, then blk_bvec_map_sg()
can be avoided.
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Single-page bvec can often be seen in small BS workloads, so
introduce bvec_nth_page() for avoiding to call nth_page() unnecessarily,
which looks not cheap.
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Store the request queue the last bio was submitted to in the iocb
private data in addition to the cookie so that we find the right block
device.  Also refactor the common direct I/O bio submission code into a
nice little helper.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Modified to use bio_set_polled().
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For the upcoming async polled IO, we can't sleep allocating requests.
If we do, then we introduce a deadlock where the submitter already
has async polled IO in-flight, but can't wait for them to complete
since polled requests must be active found and reaped.

Utilize the helper in the blockdev DIRECT_IO code.
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Just call blk_poll on the iocb cookie, we can derive the block device
from the inode trivially.
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This new methods is used to explicitly poll for I/O completion for an
iocb.  It must be called for any iocb submitted asynchronously (that
is with a non-null ki_complete) which has the IOCB_HIPRI flag set.

The method is assisted by a new ki_cookie field in struct iocb to store
the polling cookie.
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

xen/blkback: rework connect_ring() to avoid inconsistent xenstore 'ring-page-order' set by malicious blkfront

The xenstore 'ring-page-order' is used globally for each blkback queue and
therefore should be read from xenstore only once. However, it is obtained
in read_per_ring_refs() which might be called multiple times during the
initialization of each blkback queue.

If the blkfront is malicious and the 'ring-page-order' is set in different
value by blkfront every time before blkback reads it, this may end up at
the "WARN_ON(i != (XEN_BLKIF_REQS_PER_PAGE * blkif->nr_ring_pages));" in
xen_blkif_disconnect() when frontend is destroyed.

This patch reworks connect_ring() to read xenstore 'ring-page-order' only
once.
Signed-off-by: NDongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Commit 0da03cab
("loop: Fix deadlock when calling blkdev_reread_part()") moves
blkdev_reread_part() out of the loop_ctl_mutex. However,
GENHD_FL_NO_PART_SCAN is set before __blkdev_reread_part(). As a result,
__blkdev_reread_part() will fail the check of GENHD_FL_NO_PART_SCAN and
will not rescan the loop device to delete all partitions.

Below are steps to reproduce the issue:

step1 # dd if=/dev/zero of=tmp.raw bs=1M count=100
step2 # losetup -P /dev/loop0 tmp.raw
step3 # parted /dev/loop0 mklabel gpt
step4 # parted -a none -s /dev/loop0 mkpart primary 64s 1
step5 # losetup -d /dev/loop0

Step5 will not be able to delete /dev/loop0p1 (introduced by step4) and
there is below kernel warning message:

[  464.414043] __loop_clr_fd: partition scan of loop0 failed (rc=-22)

This patch sets GENHD_FL_NO_PART_SCAN after blkdev_reread_part().

Fixes: 0da03cab ("loop: Fix deadlock when calling blkdev_reread_part()")
Signed-off-by: NDongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Do not print warn message when the partition scan returns 0.

Fixes: d57f3374 ("loop: Move special partition reread handling in loop_clr_fd()")
Signed-off-by: NDongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Block bounce needs to allocate new page for doing IO, and the
new page has to be updated to bvec table.

Commit 6dc4f100 switches __blk_queue_bounce() to use the new
bio_for_each_segment_all() interface. Unfortunately the new
bio_for_each_segment_all() can't be used to update bvec table.

This patch fixes this issue by retrieving bvec from the table
directly, then the new allocated page can be updated to the bio.
This way is safe because the cloned bio is single page bvec.

Fixes: 6dc4f100 ("block: allow bio_for_each_segment_all() to iterate over multi-page bvec")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull NVMe changes for 5.1 from Christoph

* 'nvme-5.1' of git://git.infradead.org/nvme: (22 commits)
  nvme-rdma: use nr_phys_segments when map rq to sgl
  nvmet: convert to SPDX identifiers
  nvmet-rdma: convert to SPDX identifiers
  nvme-loop: convert to SPDX identifiers
  nvmet-fcloop: convert to SPDX identifiers
  nvmet-fc: convert to SPDX identifiers
  nvme: convert to SPDX identifiers
  nvme-pci: convert to SPDX identifiers
  nvme-lightnvm: convert to SPDX identifiers
  nvme-rdma: convert to SPDX identifiers
  nvme-fc: convert to SPDX identifiers
  nvme-fabrics: convert to SPDX identifiers
  nvme-tcp.h: fix SPDX header
  nvme_ioctl.h: remove duplicate GPL boilerplate
  nvme: return error from nvme_alloc_ns()
  nvme: avoid that deleting a controller triggers a circular locking complaint
  nvme: introduce a helper function for controller deletion
  nvme: unexport nvme_delete_ctrl_sync()
  nvme-pci: check kstrtoint() return value in queue_count_set()
  nvme-fabrics: document the poll function argument
  ...

Use blk_rq_nr_phys_segments() instead of blk_rq_payload_bytes() to check
if a command contains data to be mapped.  This fixes the case where
a struct request contains LBAs, but it has no payload, such as
Write Zeroes support.

Fixes: 6e02318e ("nvme: add support for the Write Zeroes command")
Reported-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>