No need to cast the void pointer returned by kmalloc() in
arch/arm/kvm/mmu.c::kvm_alloc_stage2_pgd().
Signed-off-by: NFiro Yang <firogm@gmail.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

gfn_to_pfn_async is used in just one place, and because of x86-specific
treatment that place will need to look at the memory slot.  Hence inline
it into try_async_pf and export __gfn_to_pfn_memslot.

The patch also switches the subsequent call to gfn_to_pfn_prot to use
__gfn_to_pfn_memslot.  This is a small optimization.  Finally, remove
the now-unused async argument of __gfn_to_pfn.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The argument to KVM_GET_DIRTY_LOG is a memslot id; it may not match the
position in the memslots array, which is sorted by gfn.

Cc: stable@vger.kernel.org
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

CR0.CD and CR0.NW are not used by shadow page table so that need
not adjust mmu if these two bit are changed
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently, whenever guest MTRR registers are changed
kvm_mmu_reset_context is called to switch to the new root shadow page
table, however, it's useless since:
1) the cache type is not cached into shadow page's attribute so that
   the original root shadow page will be reused

2) the cache type is set on the last spte, that means we should sync
   the last sptes when MTRR is changed

This patch fixs this issue by drop all the spte in the gfn range which
is being updated by MTRR
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There are some bugs in current get_mtrr_type();
1: bit 1 of mtrr_state->enabled is corresponding bit 11 of
   IA32_MTRR_DEF_TYPE MSR which completely control MTRR's enablement
   that means other bits are ignored if it is cleared

2: the fixed MTRR ranges are controlled by bit 0 of
   mtrr_state->enabled (bit 10 of IA32_MTRR_DEF_TYPE)

3: if MTRR is disabled, UC is applied to all of physical memory rather
   than mtrr_state->def_type
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: NWanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Split kvm_unmap_rmapp and introduce kvm_zap_rmapp which will be used in the
later patch
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

slot_handle_level and its helper functions are ready now, use them to
clean up the code
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There are several places walking all rmaps for the memslot so that
introduce common functions to cleanup the code
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It's used to abstract the code from kvm_handle_hva_range and it will be
used by later patch
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It's used to walk all the sptes on the rmap to clean up the
code
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This reverts commit ff7bbb9c.
Sasha Levin is seeing odd jump in time values during boot of a KVM guest:

[...]
[    0.000000] tsc: Detected 2260.998 MHz processor
[3376355.247558] Calibrating delay loop (skipped) preset value..
[...]

and bisected them to this commit.
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM may turn a user page to a kernel page when kernel writes a readonly
user page if CR0.WP = 1. This shadow page entry will be reused after
SMAP is enabled so that kernel is allowed to access this user page

Fix it by setting SMAP && !CR0.WP into shadow page's role and reset mmu
once CR4.SMAP is updated
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When a REP-string is executed in 64-bit mode with an address-size prefix,
ECX/EDI/ESI are used as counter and pointers. When ECX is initially zero, Intel
CPUs clear the high 32-bits of RCX, and recent Intel CPUs update the high bits
of the pointers in MOVS/STOS. This behavior is specific to Intel according to
few experiments.

As one may guess, this is an undocumented behavior. Yet, it is observable in
the guest, since at least VMX traps REP-INS/OUTS even when ECX=0. Note that
VMware appears to get it right.  The behavior can be observed using the
following code:

 #include <stdio.h>

 #define LOW_MASK	(0xffffffff00000000ull)
 #define ALL_MASK	(0xffffffffffffffffull)
 #define TEST(opcode)							\
	do {								\
	asm volatile(".byte 0xf2 \n\t .byte 0x67 \n\t .byte " opcode "\n\t" \
			: "=S"(s), "=c"(c), "=D"(d) 			\
			: "S"(ALL_MASK), "c"(LOW_MASK), "D"(ALL_MASK));	\
	printf("opcode %s rcx=%llx rsi=%llx rdi=%llx\n",		\
		opcode, c, s, d);					\
	} while(0)

void main()
{
	unsigned long long s, d, c;
	iopl(3);
	TEST("0x6c");
	TEST("0x6d");
	TEST("0x6e");
	TEST("0x6f");
	TEST("0xa4");
	TEST("0xa5");
	TEST("0xa6");
	TEST("0xa7");
	TEST("0xaa");
	TEST("0xab");
	TEST("0xae");
	TEST("0xaf");
}
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When REP-string instruction is preceded with an address-size prefix,
ECX/EDI/ESI are used as the operation counter and pointers.  When they are
updated, the high 32-bits of RCX/RDI/RSI are cleared, similarly to the way they
are updated on every 32-bit register operation.  Fix it.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If the host sets hardware breakpoints to debug the guest, and a task-switch
occurs in the guest, the architectural DR7 will not be updated. The effective
DR7 would be updated instead.

This fix puts the DR7 update during task-switch emulation, so it now uses the
standard DR setting mechanism instead of the one that was previously used. As a
bonus, the update of DR7 will now be effective for AMD as well.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-next-20150508' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fixes and features for 4.2 (kvm/next)

Mostly a bunch of fixes, reworks and optimizations for s390.
There is one new feature (EDAT-2 inside the guest), which boils
down to 2GB pages.

Our implementation will never trigger interception code 12 as the
responsible setting is never enabled - and never will be.
The handler is dead code. Let's get rid of it.
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch factors out the search for a floating irq destination
VCPU as well as the kicking of the found VCPU. The search is optimized
in the following ways:

1. stopped VCPUs can't take any floating interrupts, so try to find an
   operating one. We have to take care of the special case where all
   VCPUs are stopped and we don't have any valid destination.

2. use online_vcpus, not KVM_MAX_VCPU. This speeds up the search
   especially if KVM_MAX_VCPU is increased one day. As these VCPU
   objects are initialized prior to increasing online_vcpus, we can be
   sure that they exist.
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We can avoid checking guest control registers and guest PSW as well
as all the masking and calculations on the interrupt masks when
no interrupts are pending.

Also, the check for IRQ_PEND_COUNT can be removed, because we won't
enter the while loop if no interrupts are pending and invalid interrupt
types can't be injected.
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Some updates to the control blocks need to be done in a way that
ensures that no CPU is within SIE. Provide wrappers around the
s390_vcpu_block functions and adopt the TOD migration code to
update in a guaranteed fashion. Also rename these functions to
have the kvm_s390_ prefix as everything else.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>

exit_sie_sync is used to kick CPUs out of SIE and prevent reentering at
any point in time. This is used to reload the prefix pages and to
set the IBS stuff in a way that guarantees that after this function
returns we are no longer in SIE. All current users trigger KVM requests.

The request must be set before we block the CPUs to avoid races. Let's
make this implicit by adding the request into a new function
kvm_s390_sync_requests that replaces exit_sie_sync and split out
s390_vcpu_block and s390_vcpu_unblock, that can be used to keep
CPUs out of SIE independent of requests.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>

1. Enable EDAT2 in the list of KVM facilities

2. Handle 2G frames in pfmf instruction
If we support EDAT2, we may enable handling of 2G frames if not in 24
bit mode.

3. Enable EDAT2 in sie_block
If the EDAT2 facility is available we enable GED2 mode control in the
sie_block.
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NGuenther Hutzl <hutzl@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We should only enable EDAT1 for the guest if the host actually supports
it and the cpu model for the guest has EDAT-1 enabled.
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NGuenther Hutzl <hutzl@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The fast path for a sie exit is that no kvm reqest is pending.
Make an early check to skip all single bit checks.
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Commit ea5f4969 ("KVM: s390: only one external call may be pending
at a time") introduced a bug on machines that don't have SIGP
interpretation facility installed.
The injection of an external call will now always fail with -EBUSY
(if none is already pending).

This leads to the following symptoms:
- An external call will be injected but with the wrong "src cpu id",
  as this id will not be remembered.
- The target vcpu will not be woken up, therefore the guest will hang if
  it cannot deal with unexpected failures of the SIGP EXTERNAL CALL
  instruction.
- If an external call is already pending, -EBUSY will not be reported.
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.0
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

smep_andnot_wp is initialized in kvm_init_shadow_mmu and shadow pages
should not be reused for different values of it.  Thus, it has to be
added to the mask in kvm_mmu_pte_write.
Reviewed-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Current permission check assumes that RSVD bit in PFEC is always zero,
however, it is not true since MMIO #PF will use it to quickly identify
MMIO access

Fix it by clearing the bit if walking guest page table is needed
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On cpu hotplug only KVM emits an unconditional message that its notifier
has been called. It certainly can be assumed that calling cpu hotplug
notifiers work, therefore there is no added value if KVM prints a message.

If an error happens on cpu online KVM will still emit a warning.

So let's remove this superfluous message.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

vcpu->arch.apic is NULL when a userspace irqchip is active. But instead
of letting the test incorrectly depend on in-kernel irqchip mode,
open-code it to catch also userspace x2APICs.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Far call in 64-bit has a 32-bit operand size. Remove the marking of this
operation as Stack so it can be emulated correctly in 64-bit.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Caching memslot value and using mark_page_dirty_in_slot() avoids another
O(log N) search when dirtying the page.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Message-Id: <1428695247-27603-1-git-send-email-rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Code and format roughly based on Xen's vmcs_dump_vcpu.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Drop unnecessary rdtsc_barrier(), as has been determined empirically,
see 057e6a8c for details.

Noticed by Andy Lutomirski.

Improves clock_gettime() by approximately 15% on
Intel i7-3520M @ 2.90GHz.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If the null test is needed, the call to cancel_delayed_work_sync would have
already crashed.  Normally, the destroy function should only be called
if the init function has succeeded, in which case ioapic is not null.

Problem found using Coccinelle.
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

PAT should be 0007_0406_0007_0406h on RESET and not modified on INIT.
VMX used a wrong value (host's PAT) and while SVM used the right one,
it never got to arch.pat.

This is not an issue with QEMU as it will force the correct value.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently KVM will clear the FPU bits in CR0.TS in the VMCS, and trap to
re-load them every time the guest accesses the FPU after a switch back into
the guest from the host.

This patch copies the x86 task switch semantics for FPU loading, with the
FPU loaded eagerly after first use if the system uses eager fpu mode,
or if the guest uses the FPU frequently.

In the latter case, after loading the FPU for 255 times, the fpu_counter
will roll over, and we will revert to loading the FPU on demand, until
it has been established that the guest is still actively using the FPU.

This mirrors the x86 task switch policy, which seems to work.
Signed-off-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

An MSI interrupt should only be delivered to the lowest priority CPU
when it has RH=1, regardless of the delivery mode. Modified
kvm_is_dm_lowest_prio() to check for either irq->delivery_mode == APIC_DM_LOWPRI
or irq->msi_redir_hint.

Moved kvm_is_dm_lowest_prio() into lapic.h and renamed to
kvm_lowest_prio_delivery().

Changed a check in kvm_irq_delivery_to_apic_fast() from
irq->delivery_mode == APIC_DM_LOWPRI to kvm_is_dm_lowest_prio().
Signed-off-by: NJames Sullivan <sullivan.james.f@gmail.com>
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Extended struct kvm_lapic_irq with bool msi_redir_hint, which will
be used to determine if the delivery of the MSI should target only
the lowest priority CPU in the logical group specified for delivery.
(In physical dest mode, the RH bit is not relevant). Initialized the value
of msi_redir_hint to true when RH=1 in kvm_set_msi_irq(), and initialized
to false in all other cases.

Added value of msi_redir_hint to a debug message dump of an IRQ in
apic_send_ipi().
Signed-off-by: NJames Sullivan <sullivan.james.f@gmail.com>
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>