- 29 1月, 2008 40 次提交
-
-
由 Patrick McHardy 提交于
The TCP and SCTP conntrack state transition tables only holds small numbers, but gcc uses 4 byte per entry for the enum. Switching to an u8 reduces the size from 480 to 120 bytes for TCP and from 576 to 144 bytes for SCTP. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denys Vlasenko 提交于
The current TCP RST construction reuses the old packet and can't deal with IP options as a consequence of that. Construct the RST from scratch instead. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denys Vlasenko 提交于
This patch removes inlines except those which are used by packet matching code and thus are performance-critical. Before: $ size */*/*/ip*tables*.o text data bss dec hex filename 6402 500 16 6918 1b06 net/ipv4/netfilter/ip_tables.o 7130 500 16 7646 1dde net/ipv6/netfilter/ip6_tables.o After: $ size */*/*/ip*tables*.o text data bss dec hex filename 6307 500 16 6823 1aa7 net/ipv4/netfilter/ip_tables.o 7010 500 16 7526 1d66 net/ipv6/netfilter/ip6_tables.o Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
With all the newly introduced features, there is a lot to remove later on after a compatibility grace period of 2 years. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Adds IPv6 support to xt_iprange, making it possible to match on IPv6 address ranges with ip6tables. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
This patch moves ipt_iprange to xt_iprange, in preparation for adding IPv6 support to xt_iprange. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Updates the MODULE_DESCRIPTION() tags for all Netfilter modules, actually describing what the module does and not just "netfilter XYZ target". Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhart <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
In the PACKET_LOOPBACK case, the skb data was always interpreted as IPv4, but that is not valid for IPv6, obviously. Fix this by adding an extra condition to check for AF_INET. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Introduces the xt_mark match revision 1. It uses fixed types, eventually obsoleting revision 0 some day (uses nonfixed types). Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Introduces the xt_conntrack match revision 1. It uses fixed types, the new nf_inet_addr and comes with IPv6 support, thereby completely superseding xt_state. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Extend union nf_inet_addr with struct in_addr and in6_addr. Useful because a lot of in-kernel IPv4 and IPv6 functions use in_addr/in6_addr. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Introduces the xt_connmark match revision 1. It uses fixed types, eventually obsoleting revision 0 some day (uses nonfixed types). (Unfixed types like "unsigned long" do not play well with mixed user-/kernelspace "bitness", e.g. 32/64, as is common on SPARC64, and need extra compat code.) Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Introduces the xt_MARK target revision 2. It uses fixed types, and also uses the more expressive XOR logic. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Introduces the xt_CONNMARK target revision 1. It uses fixed types, and also uses the more expressive XOR logic. Futhermore, it allows to selectively pick bits from both the ctmark and the nfmark in the SAVE and RESTORE operations. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Fix incorrect mask value passed to ipv4_change_dsfield/ipv6_change_dsfield. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
This patch changes the behavior of xt_TOS v1 so that the mask value the user supplies means "zero out these bits" rather than "keep these bits". This is more easy on the user, as (I would assume) people keep more bits than zeroing, so, an example: Action: Set bit 0x01. before (&): iptables -j TOS --set-tos 0x01/0xFE after (&~): iptables -j TOS --set-tos 0x01/0x01 This is not too "tragic" with xt_TOS, but where larger fields are used (e.g. proposed xt_MARK v2), `--set-xmar 0x01/0x01` vs. `--set-xmark 0x01/0xFFFFFFFE` really makes a difference. Other target(!) modules, such as xt_TPROXY also use &~ rather than &, so let's get to a common ground. (Since xt_TOS has not yet left the development tree en direction to mainline, the semantic can be changed as proposed without breaking iptables.) Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Commit 88c85d81f74f92371745158aebc5cbf490412002 forgot to remove the old ipt_TOS file (whose code has been merged into xt_DSCP). Remove it now. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Most of the netfilter modules are not considered experimental anymore, the only ones I want to keep marked as EXPERIMENTAL are: - TCPOPTSTRIP target, which is brand new. - SANE helper, which is quite new. - CLUSTERIP target, which I believe hasn't had much testing despite being in the kernel for quite a long time. - SCTP match and conntrack protocol, which are a mess and need to be reviewed and cleaned up before I would trust them. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Initialization of the slab cache's should be done when IP is initialized to make sure of available memory, and that code can be marked __init. Signed-off-by: NStephen Hemminger <stephen.hemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Show number of entries in trie, the size field was being set but never used, but it only counted leaves, not all entries. Refactor the two cases in fib_triestat_seq_show into a single routine. Note: the stat structure was being malloc'd but the stack usage isn't so high (288 bytes) that it is worth the additional complexity. Signed-off-by: NStephen Hemminger <stephen.hemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
fib_trie_seq_show() uses two helper functions, rtn_scope() and rtn_type() that can write to static storage without locking. Just pass to them a temporary buffer to avoid potential corruption (probably not triggerable but still...) Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
inet_confirm_addr can be called with NULL in_dev from arp_ignore iff scope is RT_SCOPE_LINK. Lets always pass the device and check for RT_SCOPE_LINK scope inside inet_confirm_addr. This let us take network namespace from in_device a need for an additional argument. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
arp_ignore has two arguments: dev & in_dev. dev is used for inet_confirm_addr calling only. inet_confirm_addr, in turn, either gets in_dev from the device passed or iterates over all network devices if the device passed is NULL. It seems logical to directly pass in_dev into inet_confirm_addr. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Make them static. [ Moved the inline before, instead of after, call sites. -DaveM ] Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
No need for this. It is declared in the neighbour.h Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Valid network device is always passed into neigh_param_alloc, so remove extra checking for dev == NULL. Additionally, cleanup bogus netns assignment. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
fib_rules_unregister is called only after successful register and the return code is never checked. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Some calls in the arp.c have network namespace as an argument. Getting init_net inside these functions is simply inconsistent. Fix this. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
The neighbour entry will be destroyed in the case of error, so it is pointless to perform constly routing table lookup in this case. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
To do so, just register the proper subsystem and create files in ->init callbacks. No other special per-namespace handling for raw sockets is required. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Happily, in all the rest places (->bind callbacks only), that require the struct net, we have a socket, so get the net from it. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Pull the struct net pointer up to the showing functions to filter the sockets depending on their namespaces. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This requires just to pass the appropriate struct net pointer into __raw_v[46]_lookup and skip sockets that do not belong to a needed namespace. The proper net is get from skb->dev in all the cases. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
If declared as unsigned short, these fields can overflow, and whole trie logic is broken. I could not make the machine crash, but some tnode can never be freed. Note for 64 bit arches : By reordering t_key and parent in [node, leaf, tnode] structures, we can use 32 bits hole after t_key so that sizeof(struct tnode) doesnt change after this patch. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NRobert Olsson <robert.olsson@its.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
net/ax25/ax25_route.c:251:13: warning: context imbalance in 'ax25_rt_seq_start' - wrong count at exit net/ax25/ax25_route.c:276:13: warning: context imbalance in 'ax25_rt_seq_stop' - unexpected unlock net/ax25/ax25_std_timer.c:65:25: warning: expensive signed divide net/ax25/ax25_uid.c:46:1: warning: symbol 'ax25_uid_list' was not declared. Should it be static? net/ax25/ax25_uid.c:146:13: warning: context imbalance in 'ax25_uid_seq_start' - wrong count at exit net/ax25/ax25_uid.c:169:13: warning: context imbalance in 'ax25_uid_seq_stop' - unexpected unlock net/ax25/af_ax25.c:573:28: warning: expensive signed divide net/ax25/af_ax25.c:1865:13: warning: context imbalance in 'ax25_info_start' - wrong count at exit net/ax25/af_ax25.c:1888:13: warning: context imbalance in 'ax25_info_stop' - unexpected unlock net/ax25/ax25_ds_timer.c:133:25: warning: expensive signed divide Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-