- 26 7月, 2018 5 次提交
-
-
由 Sean Paul 提交于
DPU doesn't use this, so push it into the mdp drivers. Changes in v3: - None Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRajesh Yadav <ryadav@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Abhinav Kumar 提交于
Currently, DRM bridge for DPU relies on the default video mode setting to set the encoder mode. Add an explicit call to set the encoder mode for bridges. Changes in v3: - None Reviewed-by: NArchit Taneja <architt@codeauorora.org> Signed-off-by: NAbhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rajesh Yadav 提交于
postdiv_lock spinlock was used before initialization for 10nm pll. It causes following spin_bug: "BUG: spinlock bad magic on CPU#0". Initialize spinlock before its usage. Changes in v3: - Added Archit's R-b Reviewed-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NRajesh Yadav <ryadav@codeaurora.org> Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Chandan Uddaraju 提交于
Current DSI driver uses two connectors for dual DSI case even though we only have one panel. Fix this by implementing one connector/bridge for dual DSI use case. Use master DSI controllers to register one connector/bridge. Changes in v3: - None Reviewed-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NChandan Uddaraju <chandanu@codeaurora.org> [seanpaul removed unused local var causing a build warning] Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Chandan Uddaraju 提交于
For dual dsi mode, the horizontal timing needs to be divided by half since both the dsi controllers will be driving this panel. Adjust the pixel clock and DSI timing accordingly. Changes in v3: - Added Archit's R-b - Rebase on dsi cleanup set in msm-next Cc: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NChandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
- 25 7月, 2018 8 次提交
-
-
由 Carsten Behling 提交于
modesetting X11 driver may provide negative x/y cordinates in mdp5_crtc_cursor_move call when rotation is enabled. Cursor buffer can overlap down to its negative width/height. ROI has to be recalculated for negative x/y indicating using the lower/right corner of the cursor buffer and hotspot must be set in MDP5_LM_CURSOR_XY_SRC_Y MDP5_LM_CURSOR_XY_SRC_X. Signed-off-by: NCarsten Behling <carsten.behling@gmail.com> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Sibi Sankar 提交于
Replace version checks with the helper functions bound to cfg_handler for DSI v2, DSI 6G 1.x and DSI 6G v2.0+ controllers Signed-off-by: NSibi Sankar <sibis@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Sibi Sankar 提交于
Add dsi host helper function implementation for DSI v2 DSI 6G 1.x and DSI 6G v2.0+ controllers Signed-off-by: NSibi Sankar <sibis@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Sibi Sankar 提交于
Add dsi host helper functions support for DSI v2 and DSI 6G 1.x controllers that are under version checks Signed-off-by: NSibi Sankar <sibis@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
f9cb8d8d fixed various race conditions with CTL flush, in particular flushing and sending the START signal before encoder state was updated. But it did this a little too well in some cases that don't trigger encoder->enable(), and CTL[n].FLUSH would never be set. When page flips happen it would paper over the bug, since the first plag flip would flush out the state to the hardware. The issue could be reproduced with, for example, modetest (without the '-v' argument). Fixes: f9cb8d8d drm/msm/mdp5: rework CTL START signal handling Signed-off-by: NRob Clark <robdclark@gmail.com> Reviewed-by: NSean Paul <seanpaul@chromium.org>
-
由 Jordan Crouse 提交于
Experimentation shows that resuming power quickly after suspending ends up forcing a system hang for unknown reasons on 5xx targets. To avoid cycling the power too much (especially during init) turn up the autosuspend time for a5xx to 250ms and use pm_runtime_put_autosuspend() when applicable. Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Daniel Mack 提交于
When a msm8016 based system is woken up from suspend, the firmware in the adreno device hangs. [ 83.903416] qcom-iommu-ctx 1f09000.iommu-ctx: Unhandled context fault: fsr=0x202, iova=0x0000000000000000, fsynr=0x2, cb=1 [ 85.853633] msm 1a00000.mdss: A306: hangcheck detected gpu lockup rb 0! [ 85.853661] msm 1a00000.mdss: A306: completed fence: 370 [ 85.859073] msm 1a00000.mdss: A306: submitted fence: 372 [ 85.865113] msm 1a00000.mdss: A306: hangcheck recover! Fix this by adding pm_runtime_force_suspend/pm_runtime_force_resume as sleep ops. Signed-off-by: NDaniel Mack <daniel@zonque.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Daniel Mack 提交于
To make suspend and resume work on msm8916 platforms, call into the generic helpers and preserve the state across suspends. Signed-off-by: NDaniel Mack <daniel@zonque.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
- 14 7月, 2018 3 次提交
-
-
由 Daniel Vetter 提交于
Since there's very few callers of these I've decided to do them all in one patch. With this the unecessarily long drm_mode_connector_ prefix is gone from the codebase! The only exception being struct drm_mode_connector_set_property, which is part of the uapi so can't be renamed. Again done with sed+some manual fixups for indent issues. Reviewed-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-8-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
Again to align with the usual prefix of just drm_connector_. Again done with sed + manual fixup for indent issues. Reviewed-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-7-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
Just makes it longer, and for most things in drm_connector.[hc] we just use the drm_connector_ prefix. Done with sed + a bit of manual fixup for the indenting. Reviewed-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-6-daniel.vetter@ffwll.ch
-
- 10 7月, 2018 1 次提交
-
-
由 Boris Brezillon 提交于
Right now, the DRM panel logic returns NULL when a panel pointing to the passed OF node is not present in the list of registered panels. Most drivers interpret this NULL value as -EPROBE_DEFER, but we are about to modify the semantic of of_drm_find_panel() and let the framework return -ENODEV when the device node we're pointing to has a status property that is not equal to "okay" or "ok". Let's first patch the of_drm_find_panel() implementation to return ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace the '!panel' check by an 'IS_ERR(panel)' one. Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: NThierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-2-boris.brezillon@bootlin.com
-
- 05 7月, 2018 1 次提交
-
-
由 Ville Syrjälä 提交于
Use drm_connector_has_possible_encoder() for checking whether the encoder has an associated connector. v2: Replace the drm_for_each_connector_encoder_ids() loop with a simple drm_connector_has_possible_encoder() call Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628131315.14156-9-ville.syrjala@linux.intel.comReviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 03 7月, 2018 1 次提交
-
-
由 Russell King 提交于
In commits: 34a2ab5e ("drm: Add acquire ctx parameter to ->update_plane") 19315294 ("drm: Add acquire ctx parameter to ->plane_disable") a pointer to a drm_modeset_acquire_ctx structure was added as an argument to the method prototypes. The transitional helpers are supposed to be directly plugged in as implementations of these methods, but doing so generates a warning. Add the missing argument. A number of buggy users were added for drm_plane_helper_disable() which need to be fixed up for this change, which we do by passing a NULL ctx argument. Fixes: 19315294 ("drm: Add acquire ctx parameter to ->plane_disable") Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/E1fa1Zr-0005gT-VF@rmk-PC.armlinux.org.uk
-
- 13 6月, 2018 1 次提交
-
-
由 Kees Cook 提交于
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 12 6月, 2018 1 次提交
-
-
由 Ville Syrjälä 提交于
We want to get rid of plane->fb/crtc on atomic drivers. Stop setting them. v2: Catch a few more cases Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #v1 Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-11-ville.syrjala@linux.intel.comReviewed-by: NSinclair Yeh <syeh@vmware.com>
-
- 05 6月, 2018 6 次提交
-
-
由 Sean Paul 提交于
This patch avoids dereferencing msm_host->dev when it is NULL. If we find ourselves tearing down dsi before calling (mdp4|mdp5|dpu)_kms_init(), we'll end up in a state where the dev pointer is NULL and trying to extract priv from it will fail. This was introduced in a seemingly innocuous commit to ensure the arguments to msm_gem_put_iova() are correct (even though that function has been a stub for ~5 years). Correctness FTW! \o/ Fixes: b01884a286b0 drm/msm: use correct aspace pointer in msm_gem_put_iova() Cc: Daniel Mack <daniel@zonque.org> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Sean Paul 提交于
Now that all of the msm-specific goo is tucked safely away we can switch over to using the atomic helper commit directly. \o/ Changes in v2: - None Changes in v3: - Rebased on Archit's private_obj set Changes in v4: - None Cc: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Sean Paul 提交于
Moving further towards switching fully to the the atomic helpers, this patch removes the hand-rolled worker nonblock commit code and uses the atomic helpers commit_work model. Changes in v2: - Remove commit_destroy() - Shuffle order of commit_tail calls to further serialize commits - Use stall in swap_state to avoid abandoned events on disable Changes in v3: - Rebased on Archit's private_obj set Changes in v4: - None Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Sean Paul 提交于
Ensure that any queued events are issued when disabling the crtc. This avoids timeouts when we come back and wait for dependencies (like the previous frame's flip_done). Changes in v2: - None Changes in v3: - Rebased on Archit's private_obj set Changes in v4: - None Reviewed-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Sean Paul 提交于
In preparation for moving to atomic helpers, move the implicit sync fence handling out of atomic commit and into the plane->prepare_fb() hook. While we're at it, de-duplicate the mdp*_prepare_fb functions. Changes in v4: - Added Reported-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Sean Paul 提交于
Factor out the commit_tail() portions of complete_commit() into a separate function to facilitate moving to the atomic helpers in future patches. Changes in v2: - None Changes in v3: - Rebased on Archit's private_obj set Changes in v4: - None Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
- 04 6月, 2018 13 次提交
-
-
由 Archit Taneja 提交于
With the addition of "private_objs" in drm_atomic_state, we no longer need to subclass drm_atomic_state to store state of share resources that don't perfectly fit within planes/crtc/connector state information. We can now save this state within drm_atomic_state itself using the private objects. Remove the infrastructure that allowed subclassing of drm_atomic_state in the driver. Changes in v3: - Added to the msm atomic helper patch set Changes in v4: - None Signed-off-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NSean Paul <seanpaul@chromium.org>
-
由 Archit Taneja 提交于
This replaces the usage of the subclassed atomic state (mdp5_state) with a private_obj state embedded within drm_atomic_state. The latter method is the preferred approach, since it's simpler to implement and less prone to errors. The new API replaces the older and equivalent mdp5_state usage in the following pattern: - References to "mdp5_kms->state" (i.e, the old/existing state) is replaced with mdp5_get_existing_global_state(). In the atomic_check path, this should be called with the glob_state_lock drm_modeset_lock alredy taken. - References to "mdp5_get_state()" are replaced with mdp5_get_global_state(). This acquires glob_state_lock and uses drm_atomic_get_private_obj_state() to create a new duplicated state. Changes in v3: - Acquire glob_state_lock in mdp5_smp.c - Added to the msm atomic helper patch set Changes in v4: - None Signed-off-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NSean Paul <seanpaul@chromium.org>
-
由 Archit Taneja 提交于
Global shared resources (hwpipes, hwmixers and SMP) for MDP5 are implemented as a part of atomic state by subclassing drm_atomic_state. The preferred approach is to use the drm_private_obj infrastructure available in the atomic core. mdp5_global_state is introduced as a drm atomic private object. The two funcs mdp5_get_global_state() and mdp5_get_existing_global_state() are the two variants that will be used to access mdp5_global_state. This will replace the existing mdp5_state struct (which subclasses drm_atomic_state) and the funcs around it. These will be removed later once we mdp5_global_state is put to use everywhere. Changes in v3: - Added glob_state_lock instead of pushing it into the core - Added to the msm atomic helper patch set Changes in v4: - None Signed-off-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NSean Paul <seanpaul@chromium.org>
-
由 Daniel Mack 提交于
Even though msm_gem_put_iova() is currently a NOP function, the caller should pass in the address space pointer it used to obtain the object. Other call sites were changed in 8bdcd949 ("drm/msm: pass address-space to _get_iova() and friends"), but this one seems to have been forgotten. Signed-off-by: NDaniel Mack <daniel@zonque.org> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Daniel Mack 提交于
This regression stems from 0e08270a ("drm/msm: Separate locking of buffer resources from struct_mutex"). Signed-off-by: NDaniel Mack <daniel@zonque.org> Cc: Sushmita Susheelendra <ssusheel@codeaurora.org> Cc: Rob Clark <rclark@redhat.com> Fixes: 0e08270a ("drm/msm: Separate locking of buffer resources from struct_mutex") Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Emil Velikov 提交于
Currently the error pointer returned by msm_alloc_stolen_fb gets passed to drm_framebuffer_remove. The latter handles only NULL pointers, thus a nasty crash will occur. Drop the unnecessary fail label and the associated checks - both err and fb will be set at this stage. Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: NEmil Velikov <emil.velikov@collabora.com> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Stefan Agner 提交于
The function dsi_get_cmd_fmt returns enum dsi_cmd_dst_format, use the correct enum value also for MIPI_DSI_FMT_RGB666/_PACKED. This has been discovered using clang: drivers/gpu/drm/msm/dsi/dsi_host.c:743:35: warning: implicit conversion from enumeration type 'enum dsi_vid_dst_format' to different enumeration type 'enum dsi_cmd_dst_format' [-Wenum-conversion] case MIPI_DSI_FMT_RGB666: return VID_DST_FORMAT_RGB666; ~~~~~~ ^~~~~~~~~~~~~~~~~~~~~ Signed-off-by: NStefan Agner <stefan@agner.ch> Reviewed-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Ben Hutchings 提交于
Commit 62e3a3e3 changed get_pages() to initialise msm_gem_object::pages before trying to initialise msm_gem_object::sgt, so that put_pages() would properly clean up pages in the failure case. However, this means that put_pages() now needs to check that msm_gem_object::sgt is not null before trying to clean it up, and this check was only applied to part of the cleanup code. Move it all into the conditional block. (Strictly speaking we don't need to make the kfree() conditional, but since we can't avoid checking for null ourselves we may as well do so.) Fixes: 62e3a3e3 ("drm/msm: fix leak in failed get_pages") Signed-off-by: NBen Hutchings <ben.hutchings@codethink.co.uk> Reviewed-by: NJordan Crouse <jcrouse@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Jeykumar Sankaran 提交于
This change plumbs the new fb modifier through the various mdp/disp get_format hooks. Signed-off-by: NJeykumar Sankaran <jsanka@codeaurora.org> [seanpaul pimped out commit message a bit] Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Sean Paul 提交于
Don't leave the event != NULL once it's consumed, this is used a signal to the atomic helpers that the event will be handled by the driver. Changes in v2: - None Changes in v3: - Rebased on Archit's private_obj set Changes in v4: - None Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Abhinav Kumar 提交于
Currently the DSI PHY timings are hard-coded for a specific panel for the 10nm PHY. Replace this with the auto PHY timing calculator which can calculate the PHY timings for any panel. Changes in v4: - None Changes in v3: - None Changes in v2: - None Reviewed-by: NSean Paul <seanpaul@chromium.org> Reviewed-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NAbhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Abhinav Kumar 提交于
Make sure the video mode engine is on before waiting for the video done interrupt. Changes in v4: - Move setting enabled to false earlier Changes in v3: - Move the return value check to another patch Changes in v2: - Replace pr_err with dev_err - Changed error message Signed-off-by: NAbhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Abhinav Kumar 提交于
Check for the return value of wait for video done waits and print appropriate error message. Signed-off-by: NAbhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-