- 20 12月, 2011 6 次提交
-
-
由 Laurent Pinchart 提交于
Flash controllers can report over-current and indicator fault conditions. Define flash fault control bits for them. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NSakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Clemens Ladisch 提交于
When enumerating an entity, assign the entire entity specification instead of only the first two words. (This requires giving the specification union a name.) So far, no driver actually uses more than two words, but this will be needed for ALSA entities. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> [laurent.pinchart@ideasonboard.com: Rename specification to info] Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The field is used to select the polarity of the pixel clock signal. "Inverted" and "non inverted" are bad descriptions, specify instead on which clock edge the signals are sampled. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The HS/VS interrupt handler needs to access the pipeline object. It erronously tries to get it from the CCDC output video node, which isn't necessarily included in the pipeline. This leads to a NULL pointer dereference. Fix the bug by getting the pipeline object from the CCDC subdev entity. Reported-by: NGary Thomas <gary@mlbassoc.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The maximum preview engine output size depends on the ISP revision, not the OMAP revision. Rename the macros accordingly. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
absorb ".size_of_priv = sizeof(struct mxl111sf_adap_state)" into *_STREAMING_CONFIG macros Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 18 12月, 2011 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Hauppauge RC-5 tables require the full scancodes. The code at budget-ci handles it right, however, it request the rc-code to mask them with 0xff, breaking support for some remote controllers. Fix it by not selecting a scancode mask when the driver is on full_rc5 mode. Reported-by: NBrian May <brian@microcomaustralia.com.au> Tested-by: NBrian May <brian@microcomaustralia.com.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 13 12月, 2011 6 次提交
-
-
由 Manu Abraham 提交于
Override default delivery system information provided by FE_GET_INFO, so that applications can enumerate delivery systems provided by the frontend. Signed-off-by: NManu Abraham <abraham.manu@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Manu Abraham 提交于
Override default delivery system information provided by FE_GET_INFO, so that applications can enumerate delivery systems provided by the frontend. Signed-off-by: NManu Abraham <abraham.manu@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Manu Abraham 提交于
Override default delivery system information provided by FE_GET_INFO, so that applications can enumerate delivery systems provided by the frontend. Signed-off-by: NManu Abraham <abraham.manu@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Manu Abraham 提交于
Signed-off-by: NManu Abraham <abraham.manu@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Manu Abraham 提交于
Currently, for any multi-standard frontend it is assumed that it just has a single standard capability. This is fine in some cases, but makes things hard when there are incompatible standards in conjuction. Eg: DVB-S can be seen as a subset of DVB-S2, but the same doesn't hold the same for DSS. This is not specific to any driver as it is, but a generic issue. This was handled correctly in the multiproto tree, while such functionality is missing from the v5 API update. http://www.linuxtv.org/pipermail/vdr/2008-November/018417.html Later on a FE_CAN_2G_MODULATION was added as a hack to workaround this issue in the v5 API, but that hack is incapable of addressing the issue, as it can be used to simply distinguish between DVB-S and DVB-S2 alone, or another X vs X2 modulation. If there are more systems, then you have a potential issue. An application needs to query the device capabilities before requesting any operation from the device. Signed-off-by: NManu Abraham <abraham.manu@gmail.com> Acked-by: NAndreas Oberritter <obi@linuxtv.org> Acked-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Thomas Meyer 提交于
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107Signed-off-by: NThomas Meyer <thomas@m3y3r.de> Acked-By: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 11 12月, 2011 27 次提交
-
-
由 Mauro Carvalho Chehab 提交于
drivers/media/video/tm6000/tm6000-input.c: In function ‘tm6000_ir_int_start’: drivers/media/video/tm6000/tm6000-input.c:381:3: warning: ‘return’ with no value, in function returning non-void [-Wreturn-type] Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Kamil Debski 提交于
Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Haogang Chen 提交于
There is a potential integer overflow in uvc_ioctl_ctrl_map(). When a large xmap->menu_count is passed from the userspace, the subsequent call to kmalloc() will allocate a buffer smaller than expected. map->menu_count and map->menu_info would later be used in a loop (e.g. in uvc_query_v4l2_ctrl), which leads to out-of-bound access. The patch checks the ioctl argument and returns -EINVAL for zero or too large values in xmap->menu_count. Signed-off-by: NHaogang Chen <haogangchen@gmail.com> [laurent.pinchart@ideasonboard.com Prevent excessive memory consumption] Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@kernel.org Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
UVC devices transmit a device timestamp along with video frames. Convert the timestamp to a host timestamp and use it to fill the V4L2 buffer timestamp field. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Alexey Fisher 提交于
Export the statistics through debugfs. Signed-off-by: NAlexey Fisher <bug-track@fisher-privat.net> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Alexey Fisher 提交于
Create a debugfs entry per UVC stream. This will be used to export stream statistics. Signed-off-by: NAlexey Fisher <bug-track@fisher-privat.net> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> [mchehab@redhat.com: add incude <linux/module.h> to avoid compilation breakage] Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
GET_RES request support is mandatory for extension units, but some cameras still choke on it (one example is the Logitech QuickCam PTZ that returns a single byte for the PTZ relative control instead of four). Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Instead of skipping the payload completely, which would make the resulting image corrupted anyway, store the payload normally and mark the buffer as erroneous. If the no_drop module parameter is set to 1 the buffer will then be passed to userspace, and tt will then be up to the application to decide what to do with the buffer. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The function is not used outside of its compilation unit. Make it static. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The camera requires the PROBE_MINMAX quirk. Add a corresponding entry in the device IDs list. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The macros are defined in both drivers/media/video/uvc/uvc_video.c and include/linux/usb/video.h. Remove definitions from the former. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Turn streaming off (by selecting alternate setting 0) and disable the video buffers queue in the uvc_video_enable() error path. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Replace the current video buffers queue implementation with videobuf2-vmalloc. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Add mem, length and bytesused fields to the uvc_buffer structure and use them instead of accessing the uvc_buffer::buf m.offset, length and bytesused fields directly. This prepares the driver to the conversion to videobuf2. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Thierry Reding 提交于
Checking for &dev->int_in is useless because it returns the address of the embedded struct tm6000_endpoint, which will always be positive and therefore true. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Thierry Reding 提交于
Function parameters on subsequent lines should never be aligned with the function name but rather be indented. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Thierry Reding 提交于
The original patch used the fast USB quirk to enable fast access to registers in the tm6000_read_write_usb(). The applied patch moved the check to the tm6000_reset(), probably due to some merge conflicts. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Improve the use of the WARN_ON() macro and use a local variable, instead of reduntantly dereferencing a pointer in v4l2-dev.c Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-François Moine 提交于
Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-François Moine 提交于
The topro webcams don't support 30fps in 640x480 mode. Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-François Moine 提交于
Adjustment of the colors by the po2030n is finer than by the bridge controls. Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-François Moine 提交于
The 'open-drain' mode was not reset when starting the webcams. This problem was introduced by commit 0e4d413a and its exact effects are unknown. Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-François Moine 提交于
As the alternate settings are now sorted in gspca main, the variable 'nbalt' is no more useful. Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-François Moine 提交于
The alternate settings are now sorted in gspca main, so the flag 'reverse_alts' is no more useful. Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Malcolm Priestley 提交于
If there are two or more different it913x devices on the system they share the same ite_config and over write its settings. To over come this, the ite_config is copied to the priv area. Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
This removes comment tags intended for emacs configuration from 67 files in the Media API DocBook. Such comments are not really helpful and violate the coding style rules. Signed-off-by: NSylwester Nawrocki <snjw23@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-