This patch adds support for controlling power of hdmi phy for
exynos5 soc. A special bit is provided in exynos5 for directly
switching of PHY while in exynos4, phy power needs to be controlled
through i2c settings. I2C configuration may affect the suspend to
resume and wake-up time requirements hence not added.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds support for runtime power management for
drm mixer driver.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NShirish S <s.shirish@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds runtime power management support for exynos drm
hdmi driver.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NShirish S <s.shirish@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch fixes memory alloction(contiguous or not) and
cache mapping types(cachable or not).
For this, it converts each type from user request into dma
attribute properly.

Changelog v2:
- just code cleanup.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

For user framebuffers it's easier to just inline the
exynos_drm_framebuffer_init helper instead of trying to adjust it -
most of the things that helper sets up need to be overwritten anyway
again due to the multiple backing storage objects support exynos has,
but does not use for the fbdev.

Changelog v2:
- fix NULL point issue to first gem object of exynos drm framebuffer.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

In case of error, function arm_iommu_create_mapping() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch removes vaddr member from exynos_drm_overlay structure
and also relevant codes for code cleanup.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Changelog v3:
just code cleanup.

Changelog v2:
fix argument to dma_mmap_attr function.
- use pages instead of kvaddr because kvaddr is 0 with
  DMA_ATTR_NO_KERNEL_MAPPING.

Changelog v1:
When gem allocation is requested, kernel space mapping isn't needed.
But if need, such as console framebuffer, the physical pages would be
mapped with kernel space though vmap function.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This patch releases allocated resources correctly.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Changelog v2:
Added details of original patch in chromium kernel

Changelog v1:
When fimd is turned off, we disable the clocks which will stop
the dma. Now if we remove the current framebuffer, we cannot
disable the overlay but the current framebuffer will still be freed.
When fimd resumes, the dma will continue from where it left off
and will throw a PAGE FAULT since the memory was freed.

This patch fixes the above problem by disabling the fimd windows
before disabling the fimd clocks. It also keeps track of which
windows were currently active by setting the 'resume' flag. When
fimd resumes, the window with a resume flag set is enabled again.

Now if a current fb is removed when fimd is off, fimd_win_disable
will set the 'resume' flag of that window to zero and return.
So when fimd resumes, that window will not be resumed.

This patch is based on the following two patches:
http://git.chromium.org/gitweb/?p=chromiumos/third_party/kernel.git;a=commitdiff;h=341e973c967304976a762211b6465b0074de62ef
http://git.chromium.org/gitweb/?p=chromiumos/third_party/kernel.git;a=commitdiff;h=cfa22e49b7408547c73532c4bb03de47cc034a05
These two patches are rebased onto the current kernel with
additional changes like removing 'fimd_win_commit' call from
the resume function since this is taken care by encoder
dpms, and the modification of resume flag in win_disable.
Signed-off-by: NPrathyush K <prathyush.k@samsung.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NStephane Marchesin <marcheu@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

When mixer is turned off, we disable the clocks which will stop
the dma. Now if we remove the current framebuffer, we cannot
disable the overlay but the current framebuffer will still be freed.
When mixer resumes, the dma will continue from where it left off
and will throw a PAGE FAULT since the memory was freed.

This patch fixes the above problem by disabling the mixer windows
before disabling the mixer clocks. It also keeps track of which
windows were currently active by setting the 'resume' flag. When
mixer resumes, the window with a resume flag set is enabled again.

Now if a current fb is removed when mixer is off, mixer_win_disable
will set the 'resume' flag of that window to zero and return.
So when mixer resumes, that window will not be resumed.
Signed-off-by: NPrathyush K <prathyush.k@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

It is more optimium to use wait queues while waiting for vsync so
that the current task is put to sleep. This way, the task wont
hog the CPU while waiting. We use wait_event_timeout and not
an interruptible function since we dont want the function to exit
when a signal is pending (e.g. drm release). This patch modifies
the wait for vblank function of fimd.
Signed-off-by: NPrathyush K <prathyush.k@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

It is more optimium to use wait queues while waiting for vsync so
that the current task is put to sleep. This way, the task wont
hog the CPU while waiting. We use wait_event_timeout and not
an interruptible function since we dont want the function to exit
when a signal is pending (e.g. drm release). This patch modifies
the wait for vblank function of mixer.
Signed-off-by: NPrathyush K <prathyush.k@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The wait for vblank callback is moved from overlay_ops to
manager_ops for fimd.
Signed-off-by: NPrathyush K <prathyush.k@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The wait_for_vblank callback of hdmi and mixer is now moved from
overlay_ops to manager_ops.
Signed-off-by: NPrathyush K <prathyush.k@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Changelog v2:
remove unnecessay wait_for_vblank call.
- with this patch, wait_for_vblank callback is moved from
  overlay ops to manager ops so it should be removed and
  it doesn't need to wait vblank signal at plane disable.

Changelog v1:
The wait_for_vblank callback is moved from overlay ops to manager ops
of exynos drm driver. Also, the check for DPMS OFF of encoder is
removed before calling wait_for_vblank.
Signed-off-by: NPrathyush K <prathyush.k@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

With this patch, When dma_buf_unmap_attachment is called,
the pages of sgt aren't unmapped from iommu table.
Instead, when dma_buf_detach is called, that would be done.

And also removes exynos_get_sgt function used to get clone sgt
and uses attachment's sgt instead. This patch would resolve
performance deterioration issue when v4l2-based driver is using
the buffer imported from gem.

This change is derived from videobuf2-dma-contig.c
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This patch moved the exynos-drm-hdmi platform device registration to the drm
driver. When DT is enabled, platform devices needs to be registered within the
driver code. This patch fits the requirement of both DT and Non DT based drm
drivers.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This patch moved the exynos-drm platform device registration to the drm driver.
When DT is enabled, platform devices needs to be registered within the driver
code. This patch fits the requirement of both DT and Non DT based drm drivers.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

* 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: fix fence driver for dma ring when wb is disabled
  drm/radeon/si: add VM CS checker support for CP DMA
  drm/radeon/cayman: add VM CS checker support for CP DMA
  drm/radeon: add support for CP DMA packet to evergreen CS checker
  drm/radeon: add support for CP DMA packet to r6xx/r7xx CS checker
  drm/radeon: add register headers for CP DMA on r6xx-SI
  drm/radeon: improve mc_stop/mc_resume on r5xx-r7xx
  drm/radeon: fix amd afusion gpu setup aka sumo v2
  drm/radeon: do not move bo to different placement at each cs

The dma ring can't write to register thus have to write to memory
its fence value. This ensure that it doesn't try to use scratch
register for dma ring fence driver.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=58166Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Need to verify for copies involving registers.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to verify for copies involving registers.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently only memory and GDS transfers are allowed.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently only memory to memory transfers are allowed.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Along the same lines of what was done for evergreen+
in the last kernel.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set the proper number of tile pipe that should be a multiple of
pipe depending on the number of se engine.

Fix:
https://bugs.freedesktop.org/show_bug.cgi?id=56405
https://bugs.freedesktop.org/show_bug.cgi?id=56720

v2: Don't change sumo2
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

The bo creation placement is where the bo will be. Instead of trying
to move bo at each command stream let this work to another worker
thread that will use more advance heuristic.

agd5f: remove leftover unused variable
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Alex writes:
"adds support for the
asynchronous DMA engines on r6xx-SI.  These engines are used
for ttm bo moves and VM page table updates currently.  They
could also be exposed via the CS ioctl for userspace use,
but I haven't had a chance to add proper CS checker patches
for them yet.  These patches have been tested extensively
internally for months, so they should be pretty solid."

* 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: use DMA engine for VM page table updates on SI
  drm/radeon: add dma engine support for vm pt updates on si (v2)
  drm/radeon: use DMA engine for VM page table updates on cayman/TN
  drm/radeon: add dma engine support for vm pt updates on ni (v5)
  drm/radeon: use async dma for ttm buffer moves on 6xx-SI
  drm/radeon/kms: add support for dma rings to radeon_test_moves()
  drm/radeon/kms: Add initial support for async DMA on SI
  drm/radeon/kms: Add initial support for async DMA on cayman/TN
  drm/radeon/kms: Add initial support for async DMA on evergreen
  drm/radeon/kms: Add initial support for async DMA on r6xx/r7xx

DMA engine has special packets to facilitate this and it also keeps
the 3D engine free for other things.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Async DMA has a special packet for contiguous pt updates
which saves overhead.

v2: rebase
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DMA engine has special packets to facilitate this and it also keeps
the 3D engine free for other things.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Async DMA has a special packet for contiguous pt updates
which saves overhead.

v2: leave the CP method enabled for now as doing the updates
in the DMA rings is not working properly yet.

v3: update for 2 level pts

v4: rebase

v5: drop pte/pde packet.  doesn't seem to work on NI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Pretty much the same as cayman.  Some changes to the copy
packets.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There are 2 async DMA engines on cayman, one at 0xd000 and
one at 0xd800.  The programming interface is the same as
evergreen however there are some changes to the commands
for using vmids.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Pretty similar to 6xx/7xx except the count field increased in the
packet header and the max IB size increased.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Uses the new multi-ring infrastucture.  6xx/7xx has a single
async DMA ring.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>